Used Shaker for sale (130)

Condition: used, -Converter for bottle vibrators, vibrating bottles, internal vibrators Codpfxob A Sxvj Ab Tork -Frequency converter -Number of vibrators: 1 -Cable length: about 6m -Weight: 150 kg

Condition: used, functionality: fully functional, Ohaus SHHD2325AL Orbital Shaker OHAUS Heavy Duty Shakers are designed to handle a wide range of applications no matter how difficult the task. Powerful, convenient shakers provide consistent orbital shaking action. Capacity 22.7 kg Speed Range 25 rpm – 500 rpm Tray Size 45.7 cm x 61 cm (LxW) Control Analog Drive System Triple Eccentric; Brushless DC Motor Cjdpfx Aswb Igzob Tork Calibration Speed calibration Dimensions 61 cm x 14.9 cm x 67.8 cm (LxHxW) Net Weight 49 kg Orbit 1 in (25 mm) Power 230V, 2.5A, 50/60Hz Power Consumption 75 W Safety Certification CE; TUV Speed Accuracy ±1 rpm, Above 100 rpm ±1% of set speed Speed Range 25 rpm – 500 rpm Timer 1 minute – 120 minutes Tray Construction Aluminum Good working condition. Please check out our other listings as well.

Condition: excellent (used), Bruel & Kjaer 4801 + 4812 SHAKERS SHAKER 22 amperes rms 0.5 inches/volt sec 30inch lbs 0.35 kgm Crsdpjiuzmhsfx Ab Tjk

Year of construction: 2002, condition: as good as new (ex-display), functionality: fully functional, Maximum operating temperature Zone 2.. 925ºC Zone 1..700ºC Credpsvtc Apofx Ab Tsk Dimensions of shaker shot Width..510mm Length 3410mm Height 130mm Useful hearth area 1.23m2 Throughout (approximate value, depending from bulk density, shape and dimensions of parts) - Carbonitriding/Carburising case depth 0.1 - 0.2 mm; 550 HV.. - Hardening... 225kg/h Heating Connected load 156kW Idling consumption, 850 °C 50kW Number of radiation tubes Zone 1... 8 Zone 2....6 Removal space above smoke.. Atmosphere circulating Number of fans 2 Total connected load of the furnace apron kVA25

Condition: used, Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm Cjdjfngxhepfx Ab Tjrk -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg

Condition: used, Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Frequency converter: dimensions 550/480/H260 mm -Vibrating bottle: length 450 mm -Hose length: 10 m Cjdpfjfngxfjx Ab Terk -Weight: 98 kg

Condition: used, all stainless steel nett width 650 mm length: 1.600 mm infeed height: 1.070 mm Crjdpfx Aewnbz Eob Tek 400V, 50 Hz Grill opening: 2 mm dimensions (L x W x H) : ± 1800 x 1250 x 1200 mm

Condition: good (used), Automatic perforator Kugler 340-2R Device in very good condition. Includes perforation tool 3:1 round hole and additional tools. Manufacturer description: Perforation device with a working width of up to 340 mm Device adapted for continuous operation and high loads Unique „Two-finger” system ensures excellent reception of sheets of various grammages Two-shelf feeder enabling continuous operation After perforation, sheets rotate around a special drum, thanks to which the correct sequence of pages is maintained at the receiving station Possibility of using two-part strips enabling perforation of both books and calendars Perforation up to 3 mm in one cycle Quick and easy replacement of perforation strips Crodpswt Stvofx Ab Tok Possibility of using strips with / without a recess for the hanger. There is a shaker on the delivery. Maximum working width. 340 mm Format / Dimensions min. 120x105mm Format / Dimensions max. 340x340mm Maximum cutting thickness. 3mm Mechanical cycles per minute 80-100 cycles Power supply 380V Weight 1580kg

Condition: used, Type : Wall-mounted agitator Cjdpfx Ajx Ar R Dob Tsrk Motor : 0,25 KW Total height of stand: 190cm Shaker shaft height: 60cm Supported by counterweight

Condition: excellent (used), functionality: fully functional, total height: 630 mm, total width: 370 mm, total length: 380 mm, type of input current: AC, overall weight: 49 kg, input voltage: 230 V, year of last overhaul: 2024, input current: 10 A, input frequency: 50 Hz, space requirement height: 630 mm, space requirement width: 370 mm, Mahlkönig VTA 6 S Large Coffee Grinder Mahlkönig is renowned for reliability and durability Housing material: die-cast aluminium Crjdov Atubepfx Ab Tok Bag holder combination lever-switch, clamping and shaker plate Dimensions: 370 x 630 x 380 mm (W x H x D) Power supply: 230 Volt Used machine, cleaned More machines and equipment in stock!

Condition: like new (used), Year of construction: 2019, operating hours: 900 h, functionality: fully functional, As-new AL-KO POWER UNIT 300P dust extraction filter, 2019 Acquired just before the pandemic as a dust extraction system for a CNC machine. Very little usage, under 900 operating hours. The Biesse Rover milling machine is also for sale in a separate listing. Buyer is responsible for dismantling and removal of the unit. Crodpfxoxz Rg Io Ab Tok The AL-KO Power Unit is a highly efficient, enclosed filter system equipped with a clean-air side fan. The system complies with H3 filtration class requirements: return air dust concentration is below 0.1 mg/m³. Supplied fully assembled for easy and fast installation and commissioning. Dust is collected into containers beneath the filter, enabling simple removal of shavings from under the machine. The filtered air can be returned to the workshop or discharged outside via a dedicated duct system. The enclosed design ensures low operating noise and a dust-free environment around the unit. The dust concentration of the return air is just one tenth compared to conventional bag-type extractors! Filter cleaning is performed automatically with compressed air or mechanically via shaker devices. Automatic cleaning is controlled by a vacuum sensor. Post-cleaning is performed when the unit is switched off. The filter media is Class C and features antistatic properties. Filter bag replacement is quick and easy via the light-opening roof panel on the filter. By positioning the extraction fan on the clean-air side, the system offers advantages over conventional units in terms of fire safety, noise level, and maintenance-free operation. Mechanical pre-separation of chips reduces wear on the filter media and lowers the filter load, ensuring maximum filtration efficiency. The Power Unit series achieves noise levels as low as 69 dB! In addition to wood, AL-KO dust extraction systems are also suitable for other machinable materials such as plastics, stone, cement, gypsum, and aluminium. POWER UNIT 300P - Extraction port D 300 mm, max. air flow 6,000 m³/h - Motor power 7.5 kW – filter area 30 m², collection containers 3x250 l - Includes compressed air cleaning - Includes automatic shutoff system

Condition: good (used), functionality: fully functional, Frigoscandia FloFreeze MX62 IQF tunnel freezer in good condition, operating on NH3 (ammonia). Suitable for rapid, individual quick freezing of products such as vegetables, berries, shrimp, and pasta. Supplied complete with infeed/outfeed systems, shaker, optional glazing conveyor, evaporators, control cabinets, Danfoss frequency converters, and Siemens TP1200 Comfort HMI (upgraded in 2020). Products are placed on the infeed shaker (approx. 1200 mm high), where they are separated and desticked. They are then transported into the freezer via a blue plastic conveyor belt. The belt is approximately 7400 mm long and 1190 mm wide, featuring a lowering mechanism that redistributes products and removes ice. The discharge height is 912 mm. The optional Innotec Systems glazing belt can apply a protective ice coating. The MX62 is equipped with two NH3 evaporators and six centrifugal fans, each driven by an ABB M2AA160MA-2 motor (50 Hz, 13.2 kW, 2897 rpm). Cold air is blown up through the conveyor to prevent product sticking. The evaporators can be defrosted with hot air via spray nozzles. The freezer is fitted with three inspection hatches. Includes the original control cabinets with frequency converters and Siemens control system. The FloFreeze MX62 specifications: - Dimensions: 7400 x 4700 x 3000 mm (L x W x H) - Effective belt length: 7400 mm - Effective belt width: 1190 mm - Infeed height: 1200 mm - Discharge height: 912 mm Tunnel freezer capacity (examples): Product: Green peas - Capacity: 3,600 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C Product: Cauliflower - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 40 mm Product: Tomatoes - Capacity: 1,440 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C Credpfexz Eacjx Ab Tsk - Evaporator temperature: -40°C - Piece size: approx. 30 mm Product: Strawberries - Capacity: 2,520 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: 25 to 35 mm Product: Potatoes - Capacity: 1,800 kg/h - Infeed temperature: +10°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: approx. 25 mm Product: Meat - Capacity: 2,340 kg/h - Infeed temperature: -3°C - Discharge temperature: -18°C - Evaporator temperature: -40°C - Piece size: cubes of 20 mm

Condition: like new (used), Year of construction: 2016, Demonstration Machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 2300 m³/h. The extraction unit is in like-new condition, has been inspected and refurbished by our qualified technicians. Technical data: - H3 dust tested - Extraction connection diameter: 200 mm - Automatic chip shaker - Steel impeller - Max. air flow rate: 2300 m³/h - incl. briquette press FBP 60 (50-70 kg/h) - Year of manufacture: 2016 Cedpjxxkr Ssfx Ab Tork The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL, briquette press, briquetting Reference: R-A0117

Condition: good (used), Eppendorf New Brunswick Scientific Innova 44 Incubator. Csdpoxyycijfx Ab Tjrk Are you looking for a reliable high-capacity stackable incubator shaker? The Innova 44 is one of our most popular shakers – its capacity for flasks up to 5 L in volume, the space-saving glide up door,

Condition: used, RS Simulators Codpfxjv Rcbaj Ab Terk Water-cooled temperature test chamber New generation rod program controller (SE-702 with touch panel and data logger for measurement recording) Filter dryer, refrigeration oil, and refrigerant (R23/3.25 kg and R452a/12 kg) new upon delivery, including a leak test, oil strainers, and sight glasses replaced The chamber is supplied with an RMS substructure, a frame for holding the test sample, and a separate control panel (Pure RMS housing, NO shaker included!) The special feature: the RMS substructure can be extended like a shaker using a pallet truck. This facilitates a possible test setup outside the cabinet. Measurement lines can also be routed to the outside via a duct in the base plate of the RMS substructure. The system includes a compressed air dryer, also known as a dew protection device, which prevents condensation during the heating phase (commonly found in electronics tests) Application) Test chamber dimensions: Height approx. 1000mm / Width approx. 1400mm / Depth approx. 900mm Temperature range: -70°C to +180°C Current consumption: approx. 100 A Total power: approx. 50 kVA Cooling and heating capacity: 10 K/min Since the chambers are overhauled and converted, the delivery time from the date of purchase is approx. 8-10 weeks!! Type: TS1000/70-10K For your safety, please note the following information! The following steps are carried out on our offered chambers in advance: 1. Functional testing and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a test run monitored by calibrated equipment. Condition: Used Scope of delivery: (Temperature chamber TS1000/70-10K, without test chamber contents, without shaker) (Subject to change and errors in the technical specifications, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 2024, operating hours: 764 h, power: 175 kW (237.93 HP), Operating hours: 764, First registration: 23.09.2024 Crsdow Ehx Eepfx Ab Tek Double-sided dirt collection, towed Basic equipment Control elements Main control panel mounted in the center of the cab with JVM for displaying information on a wide range of sweeper functions, plus option to download recorded data. In addition, the JVM display can show images from up to four cameras. A separate operator console with palm rest for controlling main sweeping functions is installed on the door side. Suction fan Variable suction speed from 1800 rpm to 3500 rpm for adaptation to different applications. V65t: Higher gear ratio: 1.79:1 Disc brush (gutter brush) Quick-change brush system with variable sweeping speed up to 160 rpm (controllable from the cab). Highly visible signal yellow brush disc and hose guidance. Suction mouth Suction mouth made of cast aluminum with 250 mm diameter at the inlet and tool-free adjustment. Dust suppression system Spray heads for dust binding are located at the suction nozzle(s), disc brushes, and along the front of the vehicle. “Pressadrain” water recovery system. EUnited 4-star PM10 certificate. Electrical system 24 V All external harness connectors comply with IP67 protection class requirements. External noise / Sound power level LWA 108 dB(A) for standard engines, measured according to EC Directive 2000/14/EC. LWA 112 dB(A) for high-performance engines, measured according to EC Directive 2000/14/EC. Debris container The superstructure consists of debris container and integrated water tank. Made from highly durable stainless steel. Watertight rear door locking system with safety lock and drainage function. Two side maintenance doors and side storage compartments. A water screen allows the debris container to be used as a large water tank for street washing. Rear discharge flap, automatic multi-stage debris container support, two protected rear beacons and LED work lights are standard features. Container volume 6.5 m³ Discharge angle 54° (nominal) Door opening angle 125° (nominal) Water tank The water tank with anti-surge protection can be filled via a type 'A' hydrant connection. The double membrane pump is suitable for continuous operation and even dry running. Water volume 1545 l (optional 2000 l) Exhaust hood The smooth-surfaced exhaust hood is lined with frequency-specific sound insulation. Brushes Roller brush Ø 406 mm Roller brush width 1275 mm Suction mouth width 750 mm Disc brush 500 mm (opt. Ø 650 mm) Special equipment - Body with hydrostatic drive (V65h) and hydraulic auxiliary drive with HGB2 transmission - Sweeping unit configuration in right-hand version - Pneumatic lifting and lowering of the air guidance screen in the dirt container - Pneumatically operated shaker device for air guidance screen - Chain curtain in the dirt container in front of the air guidance screen - Water tank connection coupling Type A, Storz 2 1/2 inch - Waste water drain screen with graded perforation, mounted on the tailgate, enables more efficient drainage of the dirt area (see PI611) - Mounting frame on the tailgate for attachment of additional equipment - Additional spray nozzles on the rear of the suction mouth (Ni

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 10082850 AHP, High-performance DTG digital printing printer: - The fastest DTG printer on the market - 24/7 – High production efficiency in shift work - Integrated OPC-UA interface - Wide range of pallets – including special applications - Max. print size 200 x 98 cm - Integrated presses - 12 Kyocera KJ4B print heads (CMYK + 8xwhite) - 3 pallets 400x500mm - Linear motor movement system - Native 600 dpi solution - Automatic wiper system/closing station - Linux control server - Multi-touch monitor - New software - Separate print queue for each pallet / or one for all tables - Display for each print queue - integrated thermal press - API interface Codpfxevl Hb Ts Ab Tork - incl. dampening system - incl. integrated ink shaker 2 pieces available, as well as a preparation device: Aeoon Pre-Treatment Spray Unit with Belt: - Size: 1000 x 3000 mm - 13 nozzles - Touch screen - Fully automatic with belt system - 1x220V N + L + PE - 0.9 kVA / 50/60 Hz Tesoma DLT-G-11-HHH-SR Drying Tunnel

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, machine/vehicle number: 700002/044, Wurster & Dietz gang saw system type GDZ GE S, year 1975, M.-Nr. 700002/044 Splitting wedge, W&D hydraulic clamping carriage with auxiliary carriage and rail Round log infeed with singulator, log carriage with log ejector Gang saw roller conveyor with lifter/extractor Approx. 40 conveyor rollers, each approx. 1.60 m wide, not driven Csdpfx Absxvq T Do Tork Shaker chute for gang saw waste onto the conveyor belt Electrical control cabinets, control boxes, and operator panel With spare parts inventory and Vollmer gang saw blade sharpening machine

Condition: excellent (used), Year of construction: 2024, For sale is a Felder AF-22 extraction unit with a maximum air volume flow of 3100 m³/h. The extraction unit is in very good condition and has been checked and serviced by our specialist staff. Technical specifications: - Extraction capacity: 3100 m³/h - Max. negative pressure: 2510 Pa - Extraction connection Ø 160 mm - Chip container volume: 2 x 200 liters - Incl. dust filter cartridge + shaker device - Year of manufacture: 2024 - Motor power: 3 kW The extraction unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Cjdjxxiy Uopfx Ab Terk Related terms: extraction unit, dust extraction, filter, cartridge filter Reference: R-E28WO

Condition: good (used), Year of construction: 1991, Shaker with triangular special stones Crsdpsn I Rqcjfx Ab Tjk

Condition: used, IMV Type: i240 + Amplifier SA3AM + Fan Dimensions: Power Amplifier: SA3AM.i40 W x H x D 1234 x 997 x 720 mm Vibration Exciter: i240 W x H x D 580 x 1950 x 850 mm Technical Specifications: Armature Mass: 20 kg Armature Diameter: 290 mm Armature Resonance: 2300 Hz Permissible Eccentric Moment: 850 N·m Frequency Range: 0–2600 Hz Maximum Force: 24 kN (Sine and Random) 48 kN (Shock) Maximum Acceleration: 1200 m/s² (Sine) 840 m/s² (Random) 2400 m/s² (Shock) Maximum Displacement: 100 mm p-p Maximum Load Capacity: 400 kg Environmental Conditions: Temperature 0–40 °C, Humidity 0–85 % RH Csdpfxsw H N U Dj Ab Tjrk Maximum Output Power: 30 kVA (SA3AM-i40) + Test Cube Material: Magnesium AZ91 Dimensions: 300 x 300 x 300 mm Shaker Armature: 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3AM-i40) Total Weight: approx. 2800 kg Condition: used Scope of delivery: (see picture) (Technical data, details, and specifications subject to change and errors!) For further questions, please feel free to contact us by phone.

Year of construction: 2025, condition: new, functionality: fully functional, Baguette - dough divider JAC Diviform - max. 5 kg socket (460 x 387 x 125 mm WxDxH) - Dough division and shaping - Easylock automatic locking of the grid holder - Modular solution thanks to part and form grids - Space saving - Stainless steel version - quickly and efficiently with Easy Clean - versatile - 100 different grids are offered - up to 400 pieces of dough per hour are divided and 3000 formed Connection 400V 1.5 kW, 16A-CEE plug Dimensions: 832 x 732 x 924/1604 mm, WxDxH new machine Cjdpfxohwzkns Ab Tsrk with 12 months warranty Option: Fullmatic: Automatic cycle Easyflour: flour shaker Diviform: with press lid Visit our large bakery machine park!

Condition: used, Year of construction: 2024, operating hours: 389 h, power: 175 kW (237.93 HP), Operating hours: 389, First registration: 24.10.2024 _____ Two-engine version with JCB 55 kW / Stage V Dual-sided dirt collection, towed Standard equipment – Sweeper: Control elements - Main control panel mounted in the center of the cab with JVM (JCB Vehicle Management) displaying information on a wide range of sweeper functions plus download capability for recorded data. - The JVM screen can also display images from up to four cameras. A separate control console with palm rest is installed on the door side for controlling main sweeping functions. Suction blower - Variable suction speed from 1,800 to 3,500 rpm to accommodate various applications. - V65t: Higher transmission ratio: 1.79:1 Disc brush (gutter brush) Codpfx Abjwxn Uao Tsrk - Quick-change brush system with variable sweeping speed up to 160 rpm (controllable from the cab). - Highly visible signal-yellow brush plate and hose guide. Suction nozzle - Cast aluminum suction nozzle with a 250 mm intake diameter and tool-free adjustment. Dust suppression system - Spray heads for dust binding located on the suction nozzles, disc brushes, and along the front of the vehicle. - "Pressadrain" water reprocessing system. - EUnited 4-Star PM10 certification. Electrics - 24 V - All external wiring harness connections comply with IP67 protection rating requirements. External noise / Sound power level - LWA 108 dB(A) for standard-power engines, measured per EU Directive 2000/14/EC - LWA 112 dB(A) for high-performance engines, measured per EU Directive 2000/14/EC Debris container - Superstructure consists of debris container and integrated water tank. - Manufactured from highly durable stainless steel (Inox). - Waterproof rear door locking system with safety lock and drainage function. - Two side maintenance doors and side storage compartments. - A water sieve allows use of the debris container as a large water tank for street cleaning. - Standard equipment includes rear discharge flap, automatic multi-stage hopper support, two protected rear beacons, and LED work lights. - Container volume: 6.5 m³ - Tipping angle: 54° (nominal) - Door opening angle: 125° (nominal) Water tank - Equipped with anti-surge protection, can be filled via hydrant type 'A.' - Double diaphragm pump suitable for continuous operation and even dry-running. - Water volume: 1545 l (optional 2000 l) Exhaust hood - Smooth-surface exhaust hood lined with frequency-specific sound insulation. Brushes - Roller brush diameter: 406 mm - Roller brush width: 1275 mm - Suction nozzle width: 750 mm - Disc brush: 500 mm (optional 650 mm) Special equipment - Sweeper auxiliary engine: JCB 55 kW turbocharged, low emissions – Stage V compliant, REQUIRES EN590 (or equivalent) LOW-SULPHUR FUELS - Sweeping units arranged for right-hand operation - Final assembly on supplied MB Atego 1324 - Air guidance screen inside the debris hopper, pneumatic lift and lower - Pneumatically operated shaker device for air guidance screen - Chain curtain inside the debris bin in front of the air guidance screen - Water tank connection coupling Type A, Storz 2 1⁄2" - Dirty water drain sieve with graduated perforation mounted on the rear flap for more efficient operation

Condition: ready for operation (used), Year of construction: 2007, operating hours: 3,500 h, functionality: fully functional, machine/vehicle number: 12345, 🌪️ Extraction System Höck PKFZ 1 with Radial Fan – Year of Manufacture: 2007 Technical Data: Manufacturer: Höcker Polytechnik GmbH Model: PKFZ 1-121/3018 Year: 2007 Filter Area: 183 m² Reference No.: 364577 Motor Power (Shaker): 0.18 kW Motor Power (Discharge): 0.71 kW Compressed Air Connection: Available Condition: Used, fully functional Location: 33154 Salzkotten 💨 Fan: Manufacturer: [likely Höcker or external] Model: MXE D9-111230-00 Year: 2007 Serial Number: 227637 Volume Flow Rate: approx. 107–120 m³/min (≈ 6,400–7,200 m³/h) Total Pressure Increase: 315–390 daPa Shaft Power: approx. 10.7–11.0 kW Speed: approx. 2,820 rpm Inlet Temperature: 20°C 📦 Description: For sale is a complete extraction system from Höcker Polytechnik, consisting of filter unit and radial fan. The system was installed in 2007 and was used for extracting chips and dust in an industrial setting. It is robust, industrial-grade, and recognized for its durability. Ideally suitable for: • Woodworking • Plastics processing • General industrial extraction ⚙️ Condition: Crsdexrdw Uepfx Ab Tek • Used, but in good technical condition • System was operational until recently • Visible signs of use (see photos) 📞 Contact: If interested or for further information, please contact us via message through Machineseeker or by phone. Viewing by appointment only. Price: €4,500 Location: 33154 Salzkotten Availability: Immediately

Year of construction: 2025, condition: new, functionality: fully functional, Baguette - dough divider JAC Traditional - dough weight from 150g to 950g (option 300-1900g) - max. 19 kg socket (460 x 387 x 125 mm WxDxH) Crjdshwzkrjpfx Ab Tsk - Stainless steel version - Dough division and shaping - Easylock automatic locking of the grid holder - Modular solution thanks to part and form grids - Space saving - quickly and efficiently with Easy Clean - versatile - 100 different grids are offered - Basic equipment 1 cutting grid - up to 900 dough pieces per hour are divided and 3000 formed Connection 400V 1.5 kW, 16A-CEE plug Dimensions: 832 x 772 x 924/1756 mm, WxDxH new machine with 12 months warranty Option: 10/20 split Fullmatic: Automatic cycle Easyflour: flour shaker Visit our large bakery machine park!