Used Shave for sale (126)

Condition: ready for operation (used), Rack shaping machine EZ-9V Processing length: 1200 mm Max. module: 12 mm Max. rack width: 200 mm Length of cut rack: 1100 mm Width of cut rack: 170 mm Cut module: 12 Itedpfx Aeuw Tvfeffor Weight: 10200 kg Rack shaping machine is intended for cutting of teeth of gear racks by using a method of work-piece running with a gear cutter. Rack shaping machine allows to make spur and helical gear racks of up to 1200 mm long and 12 mm maximum modul

Condition: ready for operation (used), Gear shaper STANKO 5M150 Max diameter of gears cut 800 mm Max module 12 mm Max cutter stroke 200 mm Saddle indexing gear diameter: 360 mm Axes distance (tool and table) 0-700 mm Largest tool diameter 200 mm Cutter arbor diameter 44.443 mm Isdpfx Aoqcvkvoffjtr Taper M5 Table diameter 800 mm Distance from floor to table 870 mm Indexing gear diameter: 762 mm Table hole diameter: 120A mm Double s.p.m. 33-188 mm Range of table feed rates per cutter double stroke: -Circular 0.2-1.5 mm -Radial 1-5.4 mm Table rapid rotation speed: 1.7 rpm Table rapid travel speed: 137 mm/min Cutter rapid rotation speed: 3 rpm Main electric motor power: 4.8; 5.7; 7.5 kW Dimension: 3100x1800x3500 mm Weight: 10200 kg

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, input voltage: 380 V, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3258 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used Ijdpfx Afex Hi Rxefetr For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: used, mileage: 110,000 km, power: 375 kW (509.86 HP), first registration: 06/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Demonstration vehicles 1 unit available Main Components FH Globetrotter Safety Cab Wheelbase: 3,800 mm Chassis height: MED (medium) Diesel engine 12.8 l, 510 HP/375 kW, 2,550 Nm Rear axle RSS1352A, single reduction, 13 t axle load, GCW 52 t I-Shift AT2612, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm Drive axle ratio 2.47 : 1 Reinforced Volvo Engine Brake+ (VEB+) Dura-Bright EVO aluminium wheels (polished) Paint: 1103WHIT Winter White Rest package FH, one bed Info and media package with navigation Driver comfort package Side collision avoidance and turn assist (both sides) Close-range camera on passenger side I-ParkCool (integrated parking air conditioning with automatic temperature control) PTO PTR-DH (high-speed), gearbox-mounted, rear connection: 1 DIN for pump Cab Interior, Living Driver’s seat comfort, air-suspended, heated, seatbelt integrated Two armrests on the driver’s seat Leather-covered armrests Passenger seat standard, fixed Foam comfort mattress for lower berth, firm, foldable, with safety net Basic mattress topper (20 mm) Storage space under bunk Storage compartments above bunk, capacity: 245 l Control panel (basic) at bunk (interior light, auxiliary heater, roof hatch and door locking) 33-litre fridge with freezer compartment, under bunk Compartment under dashboard with drawer Bottle holders front and rear Vanity/shaving mirror Two flexible reading lights Interior lighting with dimmer and red night lighting Side sun visor, driver’s side Interior sunblind, manual roller Roof window and emergency exit, manually operated (tinted glass) Curtains for windscreen and windows 2 rubber floor mats Central locking with remote control Cab auxiliary heater, 2 kW Automatic climate control with sun sensor Cab Interior, Driving Load/axle load indicator in vehicle display Battery indicator in display Leather steering wheel Adjustable steering wheel (height & angle), with additional steering column adjustment Roof antenna and CB radio prep Digital tachograph, generation 4 Eco cruise control (cruise control) incl. brake cruise Lane keeping assist Battery pulser device Adaptive cruise control (ACC) with collision warning and emergency braking Immobiliser, transponder in key Transmission/I-Shift control via control unit on driver's seat I-See with map-based topography information (high resolution) Trailer parking brake active up to max. 7 km/h Itodpfx Afjtxfw Rjfsr Electronic Stability Program (ESP), basic version with normal centre of gravity Chassis Rear axle load (technical) max. 13 t Front axle load (technical) max. 7.5 t Front parabolic suspension, 2-leaf (regular hardness) Rear air suspension, 4 air bags Three ride heights for air suspension 650-litre aluminium fuel tank left 112-litre AdBlue tank right Single battery system: one battery block (2 single batteries) for complete vehicle electrics Two work lights rear/top of cab, LED white Trailer recognition with LED sensor Bevelled frame end Frame thickness 6.5 mm Frame section height 266 mm Frame length rear 825 mm Additional spring brake on front axle Disc brakes, solid discs on steering axle Disc brakes on drive axle, solid, 410 mm diameter Air compressor 2-cylinder, 1,100 l/min Steel support bracket for trailer connections behind cab SAF-Holland/GF fifth wheel, SK-S 36.20, cast 1 folding wheel chock, front position Five 6 mm pneumatic lines (for body control) in cab Prepared for work

Condition: used, Schröter MM 250/6R fan for extracting/transporting wood chips, wood dust or other shavings. engine: 2,2 kW Air volume: 2,700 m³/h Entrance ø: 250 mm Output ø: 250 mm Iodpjr Er Ruofx Affotr

Condition: used, mileage: 1,372 km, power: 375 kW (509.86 HP), first registration: 06/2025, fuel type: diesel, overall weight: 18,000 kg, color: white, gearing type: automatic, Equipment: air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Vehicle number: 253176 Accident-free, full service history, non-smoker vehicle ---- HIGHLIGHTS & PACKAGES * Additional hot water heater, driver’s cab ASSISTANCE SYSTEMS * Electronic braking system with ABS and ASR * Light sensor * Rain sensor * Predictive Powertrain Control * Automatic high/low beam and cornering lights * Electronic Stability Program (ESP) * Lane departure warning system * Attention Assist * Traffic sign recognition assistant * Cruise control ENGINE, TRANSMISSION & CHASSIS * Disc brakes, front and rear axles * Stabiliser, front axle * Mercedes PowerShift 3 * High Performance Engine Brake AUDIO & COMMUNICATION * Navigation system INTERIOR * Automatic climate control * Air-suspended driver’s seat, with climate control * Comfort lower bunk * PremiumComfort mattress, lower bunk * Shaving mirror * One-piece electric sunblind, windscreen * LED ambient lighting (driving and living area) * Electric parking air conditioning * Multimedia cockpit, interactive * Interior colour: almond beige LIGHTING & VISIBILITY * LED daytime running lights * LED fog lights WHEELS * Tyre pressure monitoring system TECHNOLOGY & SAFETY * Condensate monitoring for compressed air system * Seatbelt monitoring * Reverse warning system, combined with hazard lights * Central locking system * Comfort locking system * Headlamp cleaning system Iodpfewb Rlyox Affjtr EXTERIOR * 3-piece mudguard with EC spray protection * Aerodynamic underbody panelling * Electric tilt/slide glass sunroof * Illuminated Mercedes star * External sun visor, transparent * Side marker indicators, flashing OTHER EQUIPMENT * Electronic compressed air supply unit * Compressed air connection in driver’s cab * Utilisation of residual heat * 24V, 15-pin trailer socket * 390 l tank, left side, 650 x 700 x 1000 mm, aluminium * 60 l AdBlue tank, left side * Two-stage, fuel-efficient air compressor Additional features * Electrical compressed air supply and control, medium * Electronic parking brake * Secondary oil retarder * Trailer Stability Assist (TSA) * Digital tachograph, 2nd generation, version 2, ADR * Rear-view camera at rear of tractor unit * LED indicators in signature lighting * 1 x LED work light below, centre * 1 x LED work light * Upper rear cab wall * Fuel-efficient turbocharger * Active Safety * Interior chrome package * Active Brake Assist 6 * Active Sideguard Assist 2 * Frontguard Assist ---- Subject to prior sale and errors excepted. The vehicle description serves solely for general identification of the vehicle and does not constitute a warranty in the legal sense. Our sales staff will provide you with the precise equipment details. Please contact us.

Condition: excellent (used), mileage: 136,029 km, fuel type: diesel, color: red, lifting height: 37,400 mm, mast type: telescopic, Year of construction: 2016, operating hours: 7,578 h, = Additional Options and Accessories = - Power Take-Off (PTO) = Further Information = General Information Year of manufacture: 2016 Technical Information Number of cylinders: 6 Drive: Wheeled Functionality Mast: Telescopic (4 sections) Mast length: 37.4 m Lifting capacity: 40,000 kg Superstructure brand: TEREX AC40 CE marking: Yes Condition Technical condition: Very good Visual appearance: Very good TEREX AC40 CRANE DRIVE 4X4X4 COUNTERWEIGHT 5.5 TONNES. CARRIER UNIT 136,029 KM AIR CONDITIONING AUTOMATIC TRANSMISSION TYRES 60% GOOD SIZE 445/95/R25 ADBLUE CENTRAL LUBRICATION SYSTEM UPPER STRUCTURE HEATING 1 WOODEN BLOCK FOR SHAVING 15 T. 1 X WINCH MAX LIFTING CAPACITY: 40,000 KG. MIN / MAX BOOM LENGTH: 9.5 M / 37.4 M MAX WORKING HEIGHT: 37.4 METERS CE CERTIFICATE FOLLOW US ON INSTAGRAM: GEURTSTRUCKS Itedsuxu Dtjpfx Affsr WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Condition: new, Year of construction: 2025, Metal Dust, Chips and Shavings Extractor MDC800 230V The MDC800 metal extractor is a professional device designed for effective extraction of chips, shavings and dust generated during metalworking processes. Its high efficiency, robust construction and easy operation make it a reliable piece of equipment for grinding and production workstations requiring constant cleanliness control. Key Advantages of the Machine High extraction efficiency – an airflow of up to 1800 m³/h ensures effective removal of even large volumes of metal chips. Versatile application – ideal as a chip extractor, grinder extractor, polisher extractor or for other metalworking equipment. Compact and stable construction – the rigid housing ensures safe operation and minimizes vibrations. Quick access to the container – makes emptying easier and reduces downtime. Easy filter replacement – quick and convenient access. Construction and Technology The MDC800 is designed for intensive and continuous industrial operation. The robust 0.75 kW motor runs at 2800 rpm, providing a constant and stable airflow. The dual 100 mm suction inlet system allows simultaneous connection of two workstations, significantly increasing work efficiency. The large impeller diameter of 325 mm improves the system’s aerodynamic performance and enables extraction of larger metal chip fractions without the risk of clogging. A spacious collection container ensures long operating cycles without frequent emptying. Precision and Work Efficiency The MDC800 metal chip extractor provides even and stable airflow with both single and dual inlets. The performance of 1800 m³/h (single inlet) and 1520 m³/h (dual inlet) ensures effective capture of contaminants generated during grinding, drilling, milling and other machining operations. Applications The device is ideal as a: extractor for bench and belt grinders, metal chip and shaving extractor in locksmith workshops, metal dust extraction system in tool shops, Itodsx E Udhepfx Affjr extraction unit for polishing and deburring processes. Standard Equipment large-capacity chip container, replaceable filter, dual suction inlet 2 × 100 mm, stable, compact steel casing. Technical Data Specification Value Motor 0.75 kW, 230V Speed 2800 rpm Suction inlets 2 × 100 mm Airflow (single inlet) 1800 m³/h Airflow (dual inlet) 1520 m³/h Impeller diameter 325 mm Chip bag size 330 × 500 mm Dimensions 580 × 480 × 1016 mm Weight 55 kg

Condition: used, filter area: 1.65 m², negative pressure: 1,800 Pa, total height: 1,900 mm, total width: 650 mm, total length: 1,100 mm, volume flow: 2,000 m³/h, overall weight: 50 kg, nominal flow rate: 2,000 m³/h, intake manifold diameter: 140 mm, extraction connection diameter: 140 mm, space requirement length: 1,100 mm, space requirement width: 650 mm, space requirement height: 1,900 mm, power: 1.1 kW (1.50 HP), nominal power: 1.1 kW (1.50 HP), transport width: 650 mm, transport length: 1,100 mm, transport height: 1,900 mm, No. 3257 Mobile extraction unit / mobile dust extractor Scheppach HA 3200 Used For extracting wood shavings, milling chips, sawdust and sanding dust Motor 1.1 kW, 380 V Air output 2000 m3/h Pressure difference max. 1800 Pa Extraction connection diameter 140 mm Impeller diameter 320 mm Special filter diameter 500 mm, height 800 mm Filter surface 1.65 m2 Extraction unit mobile with 2 swivel castors Transport dimensions approx. 1100 x 650 x 1900 mm LWH Weight approx. 50 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Isdpfx Afsx Hi H Hsfstr Terms of delivery: ex location

Condition: like new (used), Year of construction: 2021, functionality: fully functional, For sale: Automatic pressed wood block production line, including: 1. Four double block presses with 4 outlets (3 presses produce 75 mm x 75 mm blocks and 1 press produces 95 mm x 95 mm blocks; length adjustable as needed). Presses are suitable for producing blocks from wood shavings or sawdust. Mixture ratio: 85% raw material and 15% glue. Approximately 17 m³ of finished product is produced in 24 hours. 2. Two automatic glue and sawdust mixers. 3. Automatic raw material transport system: two lifting conveyors and two transport stands with trolley. Ijdpfx Afox E Rddefotr

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station with 2xMotors , HF-top and bottom milling unit, corner rounding unit, chain feed, double roller top pressure, extendable work piece support, signal lamp for work piece sequence and synchronisation of working units by encoder. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0/6.0 mm and of 8 – 60 mm work piece thickness. Speed: 10,0 m/min.; 8,0 m/min. with corner rounding • 3 spaces for finishing units • 10“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 800 mm →Longer infeed lineal (650 mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Isdpfx Afsl Rix Njfotr Optional: EVA/PUR gluepot with run out / cleaning function for quick change of glue →Pneumatically operated cut-off knife from roll material up to 3mm edge thickness →Automatic feeding magazin (70mm magazin capacity) with spiked roller for solid wood →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and two of smaller diameter, conical, one positive and one negative pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece , adjustment of the pressure unit with digital readout. →High-frequency cut-off saw equipped with 2xHF motor 0.55 kW, 12,000 rpm, 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.55 kW high-frequency motors with HM-WPL special millers; suitable for radius, bevel and flush milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : Automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel. One side (front or back edge) or both side corner rounding unit. →Rotatable control panel with 10“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis, incl. digital Meter counter Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts. →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of th

Condition: used, Year of construction: 1996, Empty weight: 900 kg Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Iodjx An Ncspfx Affstr Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg

Condition: used, Year of construction: 2004, WE HAVE 24 OF THESE SHREDDERS CAN DO A PACKAGE PRICE FOR MULTIPLE PURCHASES Type: EH 400/1 Serial number: 901 Year of manufacture: 2004 Itjdpfxsxapr He Affer Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes 🛠️ Description of the device Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Condition: used, mileage: 391,000 km, power: 375 kW (509.86 HP), first registration: 06/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, navigation system, parking heater, Full service history ---- ----* Electronic Brake System (EBS) with ABS and ASR * Disc brakes on front and rear axle * Electronic parking brake * Secondary water retarder * Wheelbase 3,700 mm * Driver's air-suspended comfort seat * Upper comfort bed, wide, height-adjustable * Lower comfort bed * PremiumComfort mattress below * Shaving mirror * Electric sun blind, one-piece * LED ambient lighting, for driving and living * Stationary air conditioning, electric * Automatic climate control * Residual heat utilization * Auxiliary hot water heater, cab * Additional cab thermal insulation * Electric tilting/sliding glass roof * Interface for Fleet Management System (FMS) * 24 V, 15-pin trailer socket * Mercedes star, illuminated * BigSpace cab, 2.50 m wide, flat floor * Lockable air deflector with end edge flaps * External sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Tyres 315/70 R 22.5 * Tyres 315/70 R 22.5 rear axle * Air suspension, rear axle Itedsx Efqcjpfx Affsr * Navigation system * 570 litre fuel tank * 60 litre AdBlue tank * 430 litre fuel tank * Automatic high/low beam and cornering light * Engine OM 471, R6, 12.8 l, 375 kW (510 hp), 2,500 Nm * Engine spec Euro 6, D * High Performance Engine Brake * Safety Pack * Chrome package, interior * Climate package * Comfort package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Driver airbag * Cruise control * Actros model generation 5 * Refrigerator in drawer under bed * EBS ----Sale to business customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to offer you a leasing or financing option.

Condition: new, Year of construction: 2025, Precision metal lathe TYTAN 750S 230V with spindle speed control on a DC voltage converter (inverter). Operating parameters: turning diameter 220 mm, turning length 750 mm, 1 kW motor at 230 V. The machine is designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking and reaming holes. Ideal for use in small production plants, workshops or garages. Machine description The TYTAN 750S 230V universal lathe, thanks to the smooth adjustment of the spindle speed, is an ergonomic machine that responds to the needs of the user. Reducing the time for setting the machine when machining parts with a wide range of dimensions translates into efficiency and ease of use. Version S - electronic and stepless spindle speed control, via a DC motor and voltage regulator. This ensures the best rotational accuracy of the lathe chuck, which gives better quality of machining of the manufactured elements. Main advantages: Modern DC motor with smooth spindle speed control ensures comfort of use and shortens calibration time. LCD screen – with spindle speed display allows you to control and quickly modify spindle speed when setting cutting and threading modes. Two ranges of spindle speeds: reduced (50-1125) for machining hard steels and increased (100-2500) for precision turning at high speeds. Cut threads – metric - 12 degrees (0.4-3.5), inch - 12 degrees (8-44), possibility of cutting left and right threads. Automatic feed – in compliance with EU directives (CE) and Polish regulations and DIN standards. The machine is fully compliant – easy and convenient machine operation. Machine base optionally available Technical parameters Turning diameter over bed 220mm Turning diameter over cross slide 110mm Spacing of fangs 750mm Bed width 100mm Hole through the spindle 38mm Cone at the end of the spindle MK5 Number of spindle speeds liquid Spindle speed range 50-2500 rpm Number of metric threads 12 Metric thread range 0.4~3.5mm Number of English (inch) threads 12 English (inch) thread range 8-44 threads per inch Longitudinal feed range 0.15 - 0.25 mm/rev (2) Maximum travel of the chuck slide 70mm Maximum travel of the cross slide 80mm Maximum longitudinal carriage travel 630mm Tailstock sleeve travel 60mm Taper in tailstock spindle MT2 Isdsv Uplaspfx Affjtr Main engine 1000W Tailstock bearing liner travel distance 60mm Tailstock sleeve end MK2 Main engine 1000W Dimensions L/W/H (without base) 1250x380x1100mm ​ Weight (without stand) 95kg standard equipment 3-jaw chuck (125 mm) Fixed and movable rest Change wheels MK2 permanent fang MK4 permanent fang Lubricator Shavings tub Chuck and chuck key Complete set of service tools Safety guards compliant with CE standards User manual in Polish CE Declaration of Conformity optional equipment Machine base Set of lathe knives 12 x 12 (11 pcs. with soldered plate) MK2 live center MK2/B16 drill arbor HSS-CO5 Cobalt Drill Bit Set / 1-13 Universal cooling system Emulsifying oil, cutting fluid ES-12 1L

Condition: used, mileage: 565,222 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: beige, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Mercedes-Benz 1848 LS Actros First registration: 01/2020 * GigaSpace L-cab * Leaf/air suspension * Wheelbase: 3,700 mm * Front axle tires approx. 50% * Rear axle tires approx. 50% * 2 x bunk beds * Refrigerator box Iedpfx Asx Axn Noffetr * Retarder * German vehicle Special equipment: Axle load measuring device, front axle load 8.0 t, work lights, audio system: digital radio DAB / DAB+, Equipment packages: Driving, Economy, Climate, Comfort, Media, Safety, Visibility, Storage, air horn, 24V / 100A electric pre-installation in cab, Assistance system: Turn Assist, Assistance system: Active Drive Assist, Cab: Extra-Line interior, Cab: Style-Line interior, Cab: air suspension, Cab: shaving mirror, Cab: smoke detector, 12-speed gearbox - type: G 281-12, integral rear, folding table in parapet, comfort telephony (Bluetooth) with induction charging cradle, wide upper comfort bed, three-piece mudguards, fuel tank: combined aluminum tank - 720 l diesel + 75 l urea solution (AdBlue), additional fuel tank 330 l aluminum, right side, side deflectors, mounting plate / 40 mm saddle plate for 20 t fifth wheel, reinforced engine brake, PremiumComfort upper mattress, rear frame overhang 1050 mm, smoker package, tire pressure monitoring system, retarder, low-maintenance fifth wheel coupling, greased locking, additional remote control keys (2), fleet management system interface, drawers under parapet, seat covers/upholstery: passenger seat velour, driver's seat velour, Cab seats: driver's seat with massage function, Cab seats: comfort driver's suspension seat, sound system, exterior storage flap left, additional 12V / 15A socket in passenger footwell, preparation / switch for lift axle on trailer/semi-trailer, preparation for four surround cameras (displayed on dashboard monitor), sleeping cabin curtain Additional equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 5, Actros L-cab, heated approach/front mirrors, trailer electrical and brake connections (low), 24V / 15-pin trailer socket, entry step driver's side left, exhaust to right outside, Powertrain 2 package, exterior mirror camera (MirrorCam), batteries side-by-side, rear axle differential lock, torque increase in 12th gear, compressed air outlet in cab, steel air reservoir, air unit with condensate monitoring, medium air unit, automatic driving light activation (light sensor), assistance system: Attention Assist (fatigue detection sensor), assistance system: autonomous emergency braking (Active Brake Assist 5), assistance system: Lane Keeping Assist, Cab: fixed entry, Cab: chrome interior package, Cab: hydraulic tilting, Cab: L GigaSpace, 2.50 m, flat floor, vehicle contour lights LED, suspension: leaf/air, electric windows, vehicle without rear window, 100A regulated alternator, speed limiter, urea tank (AdBlue): 60 l, rear axle with active lubrication (unregulated), rear axle ring gear 440, body/chassis: tractor unit, lower comfort bed, comfort central locking, electronically controlled steering pump, 2-stage air compressor, heated air dryer, engine 12.8 l - 350 kW R6 diesel (OM 471), engine variant OM 471, application type: local distribution.

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 – 3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 7,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) Ijdpfxod R U Aco Affetr →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Rotatable control panel with 7,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340eaae3

Condition: new, Year of construction: 2025, Holzkraft Extractor RLA 210 For wood dust and shavings, designed for commercial use Item number: 5132100 Brand: Holzkraft Dimensions and weights Shavings collection volume: 2 x 165 l Nominal diameter of the external suction nozzle inlet: 200 mm Length: approx. 1755 mm Width/depth: approx. 830 mm Height: approx. 1800 mm Weight: approx. 259 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 22 m² Noise emission Sound pressure level: max. 72 dB(A) Voltage flow: Nominal flow rate: 2262 m³/h Dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with low noise Space requirement Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bag Dust extractor is delivered fully assembled, allowing for quick installation All models are mobile For model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface Filter description Iedehk Dfropfx Affjtr Ultra-compact with maximum filter surface Filter material made of aluminized polyester fleece, washable and therefore with a long service life Filter is tested and approved as standard in an antistatic version according to category M-BIA Filter resistance monitoring via differential pressure cell, adjustable with a warning light on the unit Control box The fan is installed downstream of the filter. Equipment details With a new locking device for secure container positioning. Location: From stock, 54634 Bitburg - Available at short notice.

Condition: used, mileage: 355,600 km, power: 375 kW (509.86 HP), first registration: 04/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Lowliner * 12-speed automatic transmission * Front axle with air suspension * Front axle load capacity: 8.0 t * Electronic braking system (EBS) with ABS and ASR * Disc brakes on front and rear axles * Parking brake, electronic * Secondary oil retarder * Wheelbase: 3,700 mm * Servotwin steering * Aerodynamic side paneling * Driver's air suspension seat, comfort version * Massage function for driver's seat * Wide, level-adjustable comfort upper bunk * Comfort lower bunk * PremiumComfort lower mattress * Shaving mirror * Electric sunblind, one-piece * LED ambient lighting, for driving and living * StyleLine package * Electric stationary air conditioning * Automatic climate control * Residual heat utilization * Additional hot-water heater, cab * Additional cab thermal insulation * Electric sliding/tilting glass sunroof * Interface, Fleet Management System (FMS) * 24V, 15-pin trailer socket * ExtraLine package * Illuminated Mercedes star * GigaSpace cab, 2.50 m wide, flat floor * Long cab * Cab width: 2.50 m * Comfort cab suspension, air-sprung * Rigid air deflectors with end flaps * Exterior sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heated driver's seat * Tyres: 295/60 R 22.5 (rear axle) * Tyres: 355/50 R 22.5 (front axle/leading axle/trailing axle) * Rear axle air suspension, Lowliner * Sound system * Navigation system * Axle load monitoring device * 390-liter fuel tank * 60-liter AdBlue tank * 290-liter fuel tank * Automatic main/dipped beam and cornering light * Headlamp cleaning system * Engine OM 471, R6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine version Euro 6, E * High Performance Engine Brake Itedsx Dn Syopfx Affer * Safety Package * Climate Package * Economy Package * Driving Package * Comfort Package * Sight Package * Actros Driver Extent * Fifth-wheel coupling with plate, Jost JSK 42MK * Alu wheels 9.00 x 22.5 * Alu wheels 11.75 x 22.5 (front axle) * Electronic Stability Program (ESP) * Lane Keeping Assistant * Distance Control Assistant * Attention Assist * Traffic Sign Assistant * Active Brake Assist 5 * Active Sideguard Assist * Tire Pressure Monitoring System * Active Drive Assist 2 * Driver airbag * Cruise control * Actros model generation 5 * Refrigerator in drawer under bed * EBS * Metallic paint * Without spare wheel ----Sale to commercial customers only! No guarantee for the accuracy of the information! Subject to prior sale! The exclusive applicability of our general terms and conditions applies! We are happy to provide you with a leasing or financing offer.

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces (EVA-PUR Glue pot with run-out function/optional), HF-cut-off saw station, HF-top and bottom milling unit, Corner rounding unit, chain feed, double roller top pressure, extendable work piece support and signal lamp for work piece sequence. For ABS, PVC, melamine and strong wood veneer roll material as well as fixed lengths from 0.4 –3.0 mm and of 8 – 50 mm work piece thickness. Speed: 7,0 m/min. • 2 spaces for finishing units • 10,0“ Colour Touch screen →Automatic edge feeding for material over turntable D=600 mm →Infeed lineal (400mm) →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Separate glue roller temperature adjustment. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer periods and is still turned on). Optional: EVA/PUR glue pot with run out / cleaning function for quick change of glue. →Pneumatically operated cut-off knife from roll material up to 3 mm edge thickness →A group of two rollers exerting pressure on the edge band mechanically in order to achieve its adhesion onto the panel edge. The first roller is driven and the smaller second one is idle. Adjustment of the pressure rollers with mechanical SIKO display →High-frequency cut-off saw equipped with HF motor 0.21 kW, 12,000 rpm , 2 saw blades and high-precision linear guides ensure a clean and precise saw cut, with extraction hood. →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods for shavings with central extraction nozzle 2 x Ø 100 mm; height adjustment of the upper aggregate with the top roll pressure →Corner rounding unit : automatic processing of corner edges up to 2 mm edge thickness. Equipped with one high frequency motor 0, 27 kW, selectable on operating panel →Rotatable control panel with 10,0“ color touch screen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis →LED lights →Optional : Riepe non-stick spray station and Riepe cleaning spray station Additional finish aggregates : →Radius scraper unit : With a slight draw cut eventual radius milling traces are removed to provide a perfect finish. The fine adjustment is made by digital readouts →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0.05 kW, 1,500 rpm provide a super-finish for ABS and PVC ed Iedpfxjd R U Ado Affstr 67641340e9686

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg Isdpfx Afscnw T Ijfjtr

Condition: used, mileage: 49,600 km, power: 375 kW (509.86 HP), first registration: 04/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, navigation system, parking heater, Full service history (dealer maintained) - Electronic Brake System (EBS) with ABS and ASR - Disc brakes on front and rear axles - Electronic parking brake - Secondary oil retarder - Wheelbase: 3,700 mm - Aerodynamic side panels - Comfort suspension driver's seat - Upper comfort bed, wide, level adjustable - Lower comfort bed - Lower mattress, PremiumComfort - Shaving mirror - Electric sunblind, one-piece - LED ambient lighting for driving and living areas - Stand-alone electric air conditioning - Automatic climate control - Residual heat utilization - Additional hot water heater, cab - Sound and heat insulation, cab - Electrically operated glass sliding/lifting roof - Seat base lowered by 40 mm - Interface for Fleet Management System (FMS) - 24 V, 15-pin trailer socket - Illuminated Mercedes star - BigSpace cab, 2.50 m wide, flat floor - Long cab - Cab width: 2.50 m - Adjustable air deflectors with end-edge flaps - Exterior sun visor, transparent - Air horns on cab roof - Central locking system - Comfort locking system - Light sensor - Rain sensor - Predictive Powertrain Control (PPC) - Mercedes PowerShift 3 - Powershift Advanced - Tyres: 315/70 R 22.5 (rear axle) - Tyres: 385/55 R 22.5 (front/lead/trailing axle) - Air suspension, rear axle - Sound system - Navigation system - 570-liter fuel tank - 95-liter AdBlue tank - 430-liter fuel tank - Automatic high/low beam and cornering light - LED indicators in signature lighting - 1 LED work light below, centered - Engine: OM 471, inline 6, 12.8 l, 375 kW (510 hp), 2500 Nm - Engine specification: Euro 6, E - 3rd generation OM471 engine - High Performance Engine Brake - TruckLive - Safety Pack - Climate Package with sound/thermal insulation - Actros L - Chrome interior package - Media package - Stowage package - Economy package - Driving package - Comfort package - Electronic Stability Program (ESP) - Lane Keeping Assist - Adaptive Cruise Control - Attention Assist - Traffic Sign Assist - Active Brake Assist 5 Itsdpfx Afox Dn Stofer - Active Sideguard Assist - Tire pressure monitoring - Driver airbag - Cruise control - Actros, Model Generation 5 - MB ATS warranty as per terms and conditions: 3 years/450,000 km from initial registration - Refrigerator drawer under the bed - EBS - No spare wheel Sale to business customers only! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We are happy to provide you with a leasing or financing offer.

Condition: used, mileage: 305,800 km, power: 375 kW (509.86 HP), first registration: 04/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, navigation system, parking heater, Lowliner ---- ----* 12-speed automatic transmission * Front axle with air suspension * Front axle load: 8.0 t * Electronic Brake System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary oil retarder * Wheelbase: 3,700 mm * Servotwin steering * Aerodynamic side panels * Comfort driver's air-suspended seat * Massage function for driver's seat * Upper comfort sleeper bunk, wide, level-adjustable * Lower comfort sleeper bunk * Lower mattress: PremiumComfort * Shaving mirror * Electric sunblind, one-piece * LED ambient lighting for driving and living * StyleLine package * Electric stationary air conditioning * Residual heat utilization * Additional hot water heater, driver cab * Additional driver cab thermal insulation * Electric tilt/sliding glass sunroof * Fleet Management System (FMS) interface * Trailer socket 24 V, 15-pin * ExtraLine package * Illuminated Mercedes star * GigaSpace cab, 2.50 m wide, flat floor * Comfort cab suspension, air-suspended * Fixed air deflectors with rear-edge flaps * Transparent exterior sun visor * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heated driver's seat * Tires: 295/60 R 22.5 rear axle * Tires: 355/50 R 22.5 front/leading/trailing axle * Air suspension, Lowliner rear axle * Sound system * Navigation system * Axle load measuring system * 390-liter fuel tank * 60-liter AdBlue tank * 290-liter fuel tank * Automatic high/low beam and cornering light function * Headlamp cleaning system * Engine: OM 471, inline 6, 12.8 L, 375 kW (510 hp), 2500 Nm * Engine version Euro 6, E * High Performance Engine Brake * Safety Package * Climate Package * Economy Package * Driving Package * Comfort Package * Sight Package * Actros Driver Extent * Fifth-wheel coupling with plate, Jost JSK 42MK * Aluminium rims 9.00 x 22.5 * Aluminium rims 11.75 x 22.5, front axle * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Active Sideguard Assist * Tire pressure monitoring * Active Drive Assist 2 * Driver airbag * Cruise control * Actros Model Generation 5 * Refrigerator in drawer under bed Itsdpfxjx Dn S Hs Affjr * EBS * Metallic paint * Without spare wheel ----Sale to business customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We are happy to provide you with a leasing or financing offer.

Condition: used, mileage: 327,100 km, power: 375 kW (509.86 HP), first registration: 04/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, navigation system, parking heater, Full service history ---- ----* Electronic Brake System (EBS) with ABS and ASR * Disc brakes on front and rear axle * Electronic parking brake * Secondary water retarder * Wheelbase 3,700 mm * Driver's air-suspended comfort seat * Upper comfort bed, wide, height-adjustable * Lower comfort bed * PremiumComfort mattress below * Shaving mirror * Electric sun blind, one-piece * LED ambient lighting, for driving and living * Stationary air conditioning, electric * Automatic climate control Iedpfx Asx Dn Sgoffotr * Residual heat utilization * Auxiliary hot water heater, cab * Additional cab thermal insulation * Electric tilting/sliding glass roof * Interface for Fleet Management System (FMS) * 24 V, 15-pin trailer socket * Mercedes star, illuminated * BigSpace cab, 2.50 m wide, flat floor * Lockable air deflector with end edge flaps * External sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Tyres 315/70 R 22.5 * Tyres 315/70 R 22.5 rear axle * Air suspension, rear axle * Navigation system * 570 litre fuel tank * 60 litre AdBlue tank * 430 litre fuel tank * Automatic high/low beam and cornering light * Engine OM 471, R6, 12.8 l, 375 kW (510 hp), 2,500 Nm * Engine spec Euro 6, D * High Performance Engine Brake * Safety Pack * Chrome package, interior * Climate package * Comfort package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Driver airbag * Cruise control * Actros model generation 5 * Refrigerator in drawer under bed * EBS ----Sale to business customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to offer you a leasing or financing option.

Condition: used, mileage: 221,500 km, power: 375 kW (509.86 HP), first registration: 06/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, Full service history ---- ----* 12-speed automatic transmission * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axle * Electronic parking brake * Secondary oil retarder * Wheelbase: 3,700 mm * Aerodynamic side panels * Comfort driver’s suspension seat * Upper comfort bed, wide and level adjustable * Lower comfort bed * Lower mattress, PremiumComfort * Shaving mirror * Electric sun visor, single piece * LED ambient lighting for driving and living area * Electric stationary air conditioning * Automatic climate control * Residual heat utilization * Additional hot water heater, cab * Noise and thermal insulation, cab * Electric sliding/tilting glass roof * Seat box, lowered by 40 mm * 24 V, 15-pin trailer socket * Illuminated Mercedes star * BigSpace cab, 2.50 m wide, flat floor * Adjustable air deflectors with end flap * External transparent sun visor * Air horn * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Powershift Advanced Isdpfx Aox Dn Sajffjtr * Tires: 315/70 R 22.5 rear axle * Tires: 385/55 R 22.5 front axle/trailing/lift axle * Air suspension, rear axle * Sound system * Navigation system * 570-liter fuel tank * 95-liter AdBlue tank * 430-liter fuel tank * Automatic main/dipped beam and cornering lights * LED indicator in light signature * 1 lower center LED work light * Engine: OM 471, inline 6-cylinder, 12.8 l, 375 kW (510 HP), 2,500 Nm * Engine version Euro 6, E * 3rd generation OM471 engine * High Performance Engine Brake * TruckLive * Safety Pack * Climate Package with noise/thermal insulation * Actros L * Chrome interior package * Media package * Stowage package * Economy package * Driving package * Comfort package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Active Sideguard Assist * Tire pressure monitoring * Driver airbag * Cruise control * Actros model generation 5 * MB ATS warranty as per terms and conditions: 3 years/450,000 km from first registration * Refrigerator in drawer under bed * EBS * Without spare wheel ----Sale to businesses only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We are happy to provide you with a leasing or financing offer.