Used Scrapers for sale (734)

Year of construction: 2022, condition: ready for operation (used), System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw length: 3000mm, conveying speed: 24m/min, drive power: 2.2kW, 3) Lifting-tilting device, with safety guard and safety light curtain, lifting capacity: approx. 500kg, tilting angle: 150°, discharge height: approx. 3390mm, container length/depth: 857mm, container width at discharge edge: 1060mm, container height: 916.5mm, container clearance height: approx. 255mm, container weight: approx. 135kg, max. container weight with product: 500kg, container volume: 0.5m³, lifting and discharge speed: 6.6m/min, motor power/rated current: 1.5kW/4.95A, transport chain: 2 pcs., safety chains/chain break protection: yes, chain breaking force per strand: 70,000N, operating hours reading: approx. 6400h. With complete documentation, additional spare parts are optionally available. An on-site inspection is possible. Iodpfex Dm A Rjx Affjtr

Year of construction: 1999, condition: good (used), Edge banding machine IMA Compact MFA / F / 5212 Year of manufacture 1999 S/N 06601 max. edgebanding thickness:12 mm Ijdpfxjia Naqs Affjtr min. workpiece thickness:10 mm max. thickness of roll material:3 mm feeding speed : 12 m/min adjustment of the jointing ruler : manual heating time : 10 min Joining unit : Yes, with 2 milling units Automatic roll magazine : Yes Cross cut shear up to : 0.2 - 3.0 mm Solid edge magazine : Yes Preheating of the board by radiant heater autom. gluing with glue tank granulate crosscut saw angle setting by program Multifunctional unit rounding unit/corner copying 2 motors Profile scraper Flat scraper Buffing unit Aggregate display mech.numerical display Control mode via control panel operation selector switch/ push buttons protective hood weight approx.2500 kg Dimension L x W x H 6500 x 1000 x 1600 mm CE marked technical data under reserve

Condition: used, Year of construction: 2016, MACHINING CAPACITIES: - Panel height (thickness) to be processed: 8 to 60 mm 10 to 45 mm when using the corner rounding unit - Panel length: >=220 mm - Panel width: 90 to 1100 mm - Feed (advance speed): 11 m/min - Workpiece overhang: mm - Minimum-maximum dimensions for panel radiusing: Ø x mm - Panel overhang relative to the conveyor belt: - Max spindle cutting depth: mm² - Workpiece gap: mm Roll edging: - Thickness: 0.4 to 3 mm - Width (height): panel thickness +4 mm - Minimum length: 200 mm Strip edging: - Maximum thickness: 6 mm maximum 3 mm with corner rounding unit - Width (height): panel thickness +4 mm - Minimum length: 220 mm 280 mm with corner rounding MACHINE CONFIGURATION: - Unwinding table, usable Ø795 mm - Working table: L 4.15m / H 91.5 cm Itodpfx Afjx Dcn Nefjr With 500 mm front extension - Chain feed conveyor - Anti-adhesive spray system - Edge trimming units (2 spindles) 12,000 rpm - Gluing station with interchangeable glue pot, 180-200°C Pneumatic pre-cut guillotine Pressure section with 3 rollers, 1 of which is motorized - End-trimming aggregate with 2 blades, 12,000 rpm - Top/bottom flush trimming unit with copying pads - Corner rounding unit - Radius scrapers - Straight scrapers Digital counters for settings (type SIKO) OTHER FEATURES: - Main power supply: 400V, 3-phase, 50Hz, IN 21A - Feed motor: 0.75 kW - Spindle motors: 2 x 1.5 kW - Saw motors: 2 x 0.19 kW - Trimming (milling) motors: 2 x 0.55 kW, rpm - Pneumatic supply: 8–10 bar, dry air Required working pressure: 6 bar - Extraction ports: 3 x Ø75 mm int. + 2 x Ø50 mm int. + Ø95 mm int. Required volume flow: 1600 m³/h - CE marking, lockable safety switch, emergency stop push buttons Operating dimensions: 4.45 x 1.70 x h.1.80 m Transport dimensions (L x W x H): 4.25 x 0.90 x h.1.50 m Weight: 1430 kg

Condition: used, OTT Tornado - TOP Itodpfx Afjxy Iw Ujfjr Control system - via a 15-inch color touch monitor for full automation and maximum operating convenience. CM-CombiMelt gluing system suitable for processing EVA and PUR hot melt adhesives as well as all standard cleaning granulates. Joint processing unit for edging chipboard panels. Automatic roll magazine. Automatic edge magazine. Double end trimming unit with automatic 0° / 3° swivel. Flush milling unit for flush trimming - 12mm. Fine radius milling - profile knives R2 - R5. Automated copying milling - corner rounding. Scraper unit - radius / bevel. Surface scraper unit. Sliding agent spray unit - PU. Cleaning set with fine polishing unit. Very stable workpiece support with roller conveyors - FRONT with scissor extension. Complete set of tools included. Machine is AS NEW in EXTREMELY WELL-MAINTAINED CONDITION. First commissioning in 2009, very few operating hours, approx. 1600. Machine from lease return / leasing option available. Ex stock Lieboch.

Condition: reconditioned (used), functionality: fully functional, warranty duration: 3 months, input voltage: 400 V, year of last overhaul: 2025, DGUV certified until: 11/2026, working width: 300 mm, conveyor belt width: 300 mm, type of input current: three-phase, total width: 585 mm, total length: 690 mm, total height: 1,280 mm, Wrapping Machine Universum Kasper Model: HWM 30/3 Croissant Wrapping Machine, mobile design For all stick products such as Kornspitz, pretzel sticks, etc. Universal wrapping machine Suitable for all doughs for rolling Itodpfx Aewpzcleffsr Stainless steel construction with return feature Dough portions approx. 20 to 150 g 300 mm belt width All belts and scrapers NEW DGUV V3 tested exclusively by us Connection: 400V, 16A-CEE plug Used machine, overhauled and SAB tested with warranty + service Option: Feeding belt EB Service package E-Box Maintenance contract Delivery service Instruction & commissioning We have a large selection of croissant wrapping machines!

Condition: new, input voltage: 400 V, Spiral Dough Mixer – Reliability, Efficiency, and Modern Technology Spiral mixers are essential machines in bakeries, pastry shops, and food processing operations. Each spiral dough mixer integrates advanced technology, straightforward operation, and robust construction. Professionals depend on our mixers for their reliable performance and seamless integration into production lines. High Dough Mixing Performance Iedpfx Ajx A S Rweffetr Our spiral mixers process dough with a minimum water content of 40%. You can mix batches as small as 10% of the bowl’s total capacity. The spiral dough mixer efficiently kneads both soft and dense doughs, making it ideal for bakeries, food production facilities, and confectionery manufacturing. The fixed bowl spiral mixers are a preferred, reliable solution, delivering uniform results due to their stable, immobile mixing bowl design. Spiral Dough Mixer – Durable Construction and Customization Options The spiral mixer is constructed with a robust, powder-coated steel frame. For enhanced hygiene in food and bakery settings, optional stainless steel housing is available. Key components such as the bowl, spiral, dough scraper, and safety guard are crafted from acid-resistant stainless steel, providing long-lasting durability and facilitating easy cleaning after each batch. Spiral Dough Mixer with Modern Control System All spiral mixers are equipped with an intuitive control panel featuring dual-speed timer settings. The dough scraper is fitted with a sensor for continuous dough temperature monitoring during mixing. Accurate temperature control ensures consistent dough quality. For advanced operations, we offer models with digital touchscreen control panels, enabling recipe programming and repeatable results in large-scale production environments. Quiet and Reliable Mixing Operation Modern belt-driven transmissions ensure that each spiral dough mixer operates quietly and efficiently. This technology provides smooth, user-friendly operation and minimizes the risk of mechanical failure. Energy Efficiency and Power Supply A powerful two-speed motor simultaneously drives both the spiral arm and the bowl. Fixed bowl spiral mixers require a 400 V industrial power supply. Each unit includes manual override controls for emergencies, allowing uninterrupted production processes. Safety and CE Compliance All spiral mixers comply with CE safety standards for industrial food machines. Every component is engineered to prevent accidents and safeguard users during operation.

Condition: excellent (used), Year of construction: 2014, operating hours: 216 h, functionality: fully functional, machine/vehicle number: 25.12.004.14, - Very good edge banding machine for sale due to purchase of a new one. - New jointing cutters were installed only 2 months ago. - Low total operating meters! - The machine is still in operation and can be tested. - The edge finish is still very good. Itedpox A S N Hjfx Affor Features: - Jointing up to 2mm - End trimming unit - Multi-radius flush trimmer - R2 radius scraper - Surface scraper - Buffing unit Price includes VAT. Sale excludes any warranty! If you have questions, please call 0175/5429734. Available from the end of January 2026.

Condition: used, Year of construction: 2018, Edge banding machine AKV 3006 DK - F with jointing milling unit including DIA - tools Jointing thickness up to 40 mm Workpiece thickness up to 3 mm Combined milling station radius R 2.5 mm Technical description With application of hot glue to the workpiece for edge material up to 3 mm Workpiece thickness 60 mm without jointing unit, 40 mm with jointing unit Maintenance-free, coated glue pot Itedpfxsxfh Tmo Affor HF - cross-cut station (16,000 rpm) for front and rear edge overhang HF - milling station (16,000 rpm) with interchangeable cutter (combination version) and fine adjustment from the operator side Free slots for additional processing units (system Hebrock), feed approx. 10 m/min Cutting depth adjustment of the cross-cut saw Signal lamp for workpiece sequence, robust chain drive, ergonomically arranged control panel Double-roller top pressure beam Aggregate viewing window from machine rear and operator side PLC control including touchscreen Technical data: - Feed speed 10 m/min - Panel thickness 8 - 40 mm - Weight: depending on equipment approx. 1550 kg - Dimensions (L x W x H) 5250 x 1445 x 1600 mm 2-point pneumatic cutter adjustment 1 unit Switching between radius - flush/bevel for the combined milling stations, switching between bevel or flush is manual by flipping the stop flap in the machine Buffing station (polishing) 1 unit Corner rounding cutter 1 unit incl. combination tool and pneumatic bevel/radius adjustment, max workpiece thickness 40 mm Minimum workpiece length 300 mm Radius R 2.0 mm Radius scraper 1 unit incl. pneumatic lift device, radius R 2.0 mm Surface scraper 1 unit with pneumatic engagement control Glue station change system incl. 2nd glue pot and glue outlet downwards 1 unit for quick color change Grooving saw unit horizontal into the edge 1 unit incl. pneumatic lift device and grooving tool Separate extraction of jointing unit 1 unit directly attached to jointing unit vertically upwards d=80mm for optimal suction performance from AKV 3005 DK-F urgently recommended Ball bearing for corner rounding cutter 24.1mm 1 unit Ball bearing for corner rounding cutter 24.2mm 1 unit Interchangeable motor 0.37 kW for corner rounding cutter 1 unit with quick-change device incl. radius cutter R 1 Interchangeable spindles 1 set = 2 pieces 1 unit 1 set of quick-change motors for longitudinal processing top and bottom incl. tool R 1 Compressed air requirement: 100 - 150 l/hour. Storage location: Nattheim

Condition: excellent (used), Dissolver Schneider SH 07 Vacuum dissolver Ex-protected version with wall scraper Drive power 13 kW power wall scraper 2,5 kW speed range 380-2000 1/min Mixing tank stainless steel double jacket 2 x 100 l usable capacity, 50 l capacity heating chamber Mixing tank stainless steel 1 x 200 l Itodpfx Aeimgqmoffor Very good condition, directly from production!!!

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,150 mm, total width: 1,100 mm, total height: 2,000 mm, Lithographic press, also known as scraper press, for manual printing from lithographic stones. Used by artists/lithographers, in schools, art schools, and museums. The machine was most recently used in the atelier of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 70 x 100 cm. Also very interesting as a display piece in entrance halls, restaurants, etc. Iodpfx Aex A H I Djffjtr

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, input voltage: 400 V, DGUV certified until: 12/2026, total length: 1,900 mm, total width: 1,050 mm, total height: 1,250 mm, input current: 16 A, input frequency: 50 Hz, type of input current: three-phase, power: 9.2 kW (12.51 HP), electrical fuse: 32 A, Spiral kneader / mixer Model: SP 250 MS LED control with temperature display / temperature control with rewind key Dough machine with 2 timers Tool speed adjustable Ijdpfx Afef Epwnjfetr for min / max. 10 - 160 kg dough Flour dust hood and bowl scraper 2 tank wagons (250 liters) Standing machine with changing tools Stainless steel tools: kneading spiral, flat beater, whisk DGUV V3-tested Connection 400V, 10.6 kW, 32A 32A-CEE plug Dimensions: 1050 x 1900 x 1250/2100 mm, WxDxH NEW machine With a 12 month warranty VISIT our sales center with bakery equipment and many bakery machines

Condition: excellent (used), functionality: fully functional, EDGE BANDING machine model BIESSE AKRON 245 second hand machine CE regulation : Yes with Instruction Booklets for the application of edges in wood, pvc, veneer, melamine, abs for furniture, furnishings, kitchens, bathrooms, doors, panels and various NC 321 electronic positioner Technical data: min. height of gluing panel mm.10 max. height of gluing panel mm.45 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 max. thickness wood edge mm.8 min. panel width mm.50 min. panel length mm.150 feed speed motor power Hp 2 electric press lift telescopic support for large panels soundproof cabin Iedjgipk Ajpfx Affstr Composition: gluing group with glue tank pressure rollers edge feeder end-cutting unit for front and rear vertical cutting of the excess edge n.2 motors trimming unit with overlapping motors for trimming the upper and lower part of the excess edge . n.2 motors tilting trimming unit for the final upper and lower trimming of the excess edge . n.2 motors glue scraper group for cleaning glue residues overlapping brush group for brushing and polishing the applied edges . n.2 tiltable motors Compressed air 7-8 bar Weight kg 1700

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, type of input current: three-phase, plate height: 50 mm, From business closure Type: IMA Compact 309 C Itodox Avcdspfx Affer Year of manufacture: 1992 For roll material and strips up to 9mm thickness - Gluing with hot-melt adhesive granulate - End trimming - Sawing - Flush milling - Scraper knives and buffing Payment in cash upon collection. Private sale – no warranty.

Condition: used, Year of construction: 2012, Basic machine Olimpic K 800 "T-ERL" (47) 1 pc. BASIC EQUIPMENT: - Ribbed steel machine frame with tubular reinforcements for optimal work unit support - Pivoting control panel - Support roller conveyor with ball bushing guides along the entire machine length - Protective and sound-absorbing hood with separate doors between the gluing and finishing units - Extractor nozzles located on the sound-absorbing hood - Electrical system with lockable main switch - Emergency/stop buttons at the inlet and outlet - Inverter for electric spindles. PLATE FEED SYSTEM - Feed chain with rubber glide shoes, mounted on a 1 1/4-inch industrial chain with a high friction coefficient - The chain slides on two guides made of hardened and ground steel, one round and one flat, to guarantee straight feed and protect against lateral misalignment. --- Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction. Complete with double rows of bearing rollers and protective device for the printing rollers - manual lifting of the printing unit with automatic working unit positioning when changing the plate thickness - mech. Digital display for checking the selected panel thickness. ORION 100 CONTROL SYSTEM. Control device complete with PLC, allows fast, easy, and error-free execution of custom processing programs (max. 60 programs). Manages the pneumatic positioning of the units, if present on the machine. (The control system does not include pneumatic positioning). - Alphanumeric keyboard and display - Function keys for quick control of the processing units - Ambient temperature range from 0 to +45° C. MAIN FUNCTIONS - Control of the processing units and automatic activation of the motors - Control and regulation of the glue pot temperature - Selection of longitudinal and transverse processing without program change - Simple and guided diagnostics for easy troubleshooting - Statistics on absolute data and individual processing: number of pieces, edge consumption, total chain feed distance - Unit of measurement selectable in mm or inches. Technical data OLIMPIC K800 T-ER L Edge thickness: 0.4 to 8 mm Max. gluing thickness of the roll edge: 3 mmFeed speed: 12/18 m/minWorking height: 8 to 60 mmMax. dimensions of the edge cut: 135 mm²Turntable diameter: 780 mmMax. oversize compared to the panel thickness: 4 (2+2) mmMin. panel width (with 210 mm min. length): 55 mmMin. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mmMin. distance between consecutive panels at 11 (16) m/min: 750 (850) Standard equipment - Pre-milling unit in the infeed RT-E- Gluing station VC-800- Trimming unit KSEL- Flush trimming unit, tiltable RI/800- Rounding unit ROUND K- Scraper unit RAS-V- ½ free space for surface scraper- 1 S free space for surface scraper or Universal milling or buffing unit - 1 free space for air nozzle unit. European safety regulations (C.E. mark). 1 unit. Voltage 400 EU. 1 unit. Frequency 50 Hz. 1 unit. "Autoset" for ER2, T-ERS, and T-ERL models. 1 unit. Allows all necessary adjustments to be made from the control panel for each machining change. Includes: - time-controlled pressure unit - pneumatic and independent pivoting of the mitre saw blades (front/rear) - pneumatic remote adjustment for the RI/800 flush trimming unit. Itjdpfoxq Apgex Affor

Condition: like new (used), Niemann Butterfly VKDVB 332-20 Dissolver Vacuum version with Busch vacuum pump Power 15 kW Itsdpfx Afswmaxmjfsr with wall scraper Speed range 0-240 rpm, adjustable via frequency converter Control cabinet 3 stainless steel mixing tanks, each 300 l Matching: Niemann/Gehalin H 500 squeezing device D = 700 mm for 300 l mixing tank Top condition, straight from production!

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 100007528, total length: 9,000 mm, total width: 3,000 mm, total height: 1,700 mm, type of input current: three-phase, power: 13 kW (17.68 HP), Biesse Akron 1440 A With Automatic Return Table And Conveyer, PUR Glue Pot NC Controlled , Pre miller, fence, Radius Trimmer And Scraper. Edging Thickness Selectable From Pc with automatic Setting Delivery can be arrange in the Republic of Ireland Itodpfxsxmi E Hj Affer

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived in 2025) MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Technical specifications: Edge thickness for rolls: 0.4 - 3 mm (depending on material) Edge thickness for strips: 0.4 - 8 mm (depending on material) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm (Restrictions may apply to individual units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner rounding) Workpiece length: 180 mm Feed speed: 10 m/min Equipment: Motorized pressure bridge adjustment Extendable workpiece support XL, 600 mm spacing 3-color LED light in the infeed Motorized adjustment of the infeed guide Long infeed guide 1252 mm I-Tronic package Edge Control PPC 322 W IntelliSet: intelligent Tool correction f.a.s.t = fast setting technology ECO mode Energy saving mode Prepared for RETURN connection (third-party manufacturer) BS 501 guide system; right-angled workpiece feeding for front edge banding of narrow parts - Workpiece thickness: min. 10 mm - Workpiece thickness: min. 60 mm - Workpiece length: approx. 140 - 450 mm FG201 jointing unit with 2 64 mm high milling heads Isdpfx Afexymd Tsfjtr MG 301 edge feeder GluJet GJ 725 NC PUR PRO adhesive application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° pivoting for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reactant (water molecules) from the PUR, allowing the PUR adhesive to remain in the system without curing. The vacuum pump operates independently of the machine's power supply and automatically compensates for any vacuum loss. - PUR fully under control! DW 301 printing unit with motorized NC axis; 1st roller driven by pneumatic plunge control, 2 conical pressure rollers GM301 spray unit after printing unit with lubricant for high-gloss edges KA 501 pneumatic trimming unit (60 mm) Extraction hoods for trimming unit FR301 MOT6 multifunctional trimming unit Shelf program FF 301 MOT1 profile trimming unit ZK301 MOT4 scraper unit including high-gloss package FK702 surface scraper Complete spray unit for separating and cleaning agent GM 301 spray unit after printing unit (high-gloss edges) SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: Short-term Storage location: Hochheim

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Iodolht Hwepfx Affetr Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: excellent (used), Vollrath EWFX 60 dissolver Power 44 kW Speed range 200-1200 1/min Double toothed pulley with wall scraper Ijdpsrqfqtsfx Affetr Switch cabinet with frequency converter 2 x stainless steel mixing tanks, 1,350 liters each Very good condition, straight from production!!!

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - MAGELIS control system - For EVA-based hot-melt adhesive - Jointing: 2 x 1.5 kW, u=12000, 200 Hz - End trimming: 2 x 0.2 kW, automatic swiveling 0°/3°, 2 HM saw blades 140 mm - Flush trimming: 2.07 kW, with WPL heads HF 70, diameter 70 mm - Radius trimming: R2 - Radius scraper - Surface scraper - Glue pot above - Workpiece dimensions: - Minimum width: 70 mm - Thickness: 8-42 mm - Minimum length: 150 mm - Edge thickness: 0.2-6 mm - Feed rate: 12 m/min - Extraction port: 160 mm Dimensions: 4,500 x 1,250 x 1,300 mm Weight: 1,650 kg Availability: short notice Itodpfxoxymfws Affor Location: Baden-Württemberg

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage Itedslht Hzjpfx Affer F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: excellent (used), Planetary mixer Herbst HRV-S 2-7 Power 1.5 kW Speed adjustable via frequency converter Itjdpfx Aevlwdlsffor with control cabinet Wall scraper Vacuum pump mounted on stainless steel plate Very good condition, straight from production!!!

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. Isdpei Am U Djfx Affotr max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Itodjhqadcepfx Affor Location: From stock 54634 Bitburg - available at short notice -

Condition: like new (used), Year of construction: 2022, E450PM - AUTOMATIC EDGE BANDING MACHINE V000047 LME450PM-5 with joint trimming unit Machine in excellent condition VOLTAGE 400/50/3 CONTROL WITH 7" TOUCH SCREEN EXCHANGEABLE GLUING UNIT VR - MULTIFUNCTION TRIMMING UNIT Tool for straight/radius trimming TOOL KIT R=2 mm FLAT SCRAPER RELEASE AGENT UNIT LED INTERNAL LIGHTING DOCUMENTATION IN GERMAN INFRARED LAMP for panel pre-heating SCRAPER UNIT Itjdsxac Hwjpfx Affjr Location: ex stock 54634 Bitburg - immediately available -