Used Tschudin Htg 400 for sale (21)

Condition: used, Cylindrical Grinding Machine TSCHUDIN type HTG 400 Between points: 400 mm Centre height: 100 mm Cone: CM4 Spindle speed: from 70 to 500 RPM Max table travel: 420 mm Table orientation at 15° Grinding wheel: Ø 300 mm Retractable tailstock CM3 Machine rebuilt by REWITECH SA (Switzerland) in 1995 Equipped with one settling tank PHILIPS Voltage: 380 V Dimensions (L x W x H): 2000 x 1400 x 1600 mm Weight: approx 1,5 T Todpfx Afsxtmv Ne Tjf

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle Tedpfxjurw Uyj Af Tef 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Year of construction: 2018, operating hours: 28,658 h, condition: used, machine/vehicle number: 18E400239, Through-feed grinding, grinding range Ø: 10 cm, plunge grinding, grinding range Ø: 15 cm, weight: 9,000 kg, FANUC 0i-MF control, 2 handling robots YASKAWA YR-MH005LS-E000, serial numbers: R17507-979-3 / R19033-789-1, automation system/workpiece storage EGS Automation Tschudin, year of manufacture: 2018, serial number: 180100, 4-way, oil cooling and filtration system ARO, year of manufacture: 2018, serial number: PRA0032086, protective guard Todpsx Aki Sofx Af Tjf

Condition: used, total height: 1,550 mm, total length: 1,600 mm, total width: 1,200 mm, Empty weight: 2.100 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Control: Conventional - Motor power: 4.5kW - Center distance: 480mm - Model: inderslijper extern - Travel X: 700mm - Center height: 100mm - Grinding diameter: 200mm - Travel Y: 100mm - Table length: 1150mm Tedpfxownh Tzs Af Tjf - Table width: 130mm - Transport dimensions: 1600mm x 1200mm x 1550mm (l x w x h) - Transport weight [kg]: 2100kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2013, General Data Measurements width 2400 mm Measurements depth 2000 mm Measurements height 1900 mm Machine weight 6000 kg Control Unit Brand FANUC Model 21i-MB Additional Equipment Kraft & Bauer Fire extinguishing system, Type FB703S-UV3-TFM70°/KLA 6-S-MV / Knoll microfilter, Type Micro Pur 240 F / Streuli lifting station, Type SHSRT300-TL142/180 This TSCHUDIN ecoLine 400 centerless grinding machine was manufactured in 2013. It features a Fanuc 21i-MB control system, a grinding wheel with a max outer diameter of 400 mm, and a regulating wheel with a speed range of 0-265 rpm. Additional attachments include a Kraft & Bauer fire extinguishing system and a Knoll microfilter. Consider the opportunity to buy this TSCHUDIN ecoLine 400 centerless grinding machine. Contact us for more information about this machine. Tjdpfx Aew H Txfsf Tef Application Types Grinding

Condition: good (used), Year of construction: 1987, TSCHUDIN Type HTG-610 U660 TSCHUDIN Type HTG-610 U660 Cylindrical Grinding Machine, year of manufacture 1987, in very good original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. TECHNICAL DATA MAIN DATA Centre distance: 600 mm Centre height: 100 mm Todpfjw Iqr Sjx Af Tsf Total power requirement: 4-8 HP MACHINE TABLE Table travel max.: 620 mm Table speed, stepless up to: 5 m/min Reversal delay up to: 4 sec Chuck base swivels: 7° GRINDING SPINDLE HEADSTOCK Wheel diameter: 300 mm Wheel bore (with 300 mm diameter): 127 mm Motor power with 300 mm wheel: 2.5 HP WORKPIECE SPINDLE HEADSTOCK Swivelling range: 360° Spindle taper: MT 4 Spindle speeds, stepless: 65-500 rpm Motor power: 0.5 HP TAILSTOCK Quill internal taper: MT 3 Quill stroke: 20 mm INTERNAL GRINDING ATTACHMENT Spindle diameter max.: 80 mm Motor power: 1.5 HP COOLANT TANK Capacity: 100 litres Dimensions (LxWxH): 2160 x 1200 x 1350 mm Weight: 2600 kg About the machine: We are offering a TSCHUDIN Type HTG-610 U660 cylindrical grinding machine with automatic cycle, year 1987, in very good condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. The Tschudin also operates very quietly at high speeds. Take advantage of the opportunity to inspect this machine under power on-site and see its condition for yourself. You can find further cylindrical grinding machines from reputable manufacturers on our website.

Condition: excellent (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06.E.400.020, Manufacturing origin CH Voltage 3x400V - 24(V – DC) Netweight 5500 kg Dimensions 237x206x195 cm TECHNICAL DATA Tsdpfx Asiqt S Ajf Tsf Control Fanuc 21i-MB 3 axes U : work wheel axis W : workpiece / dressing axis X: drive wheel axis Through feed grinding Workpiece diameter Ø 1.5 - 50 mm Plunge grinding Workpiece diameter Ø 1.5 - 100 mm Grinding length max 270 mm Grinding wheel Max. external diameter Ø 400 mm Inner diameter Ø 203.2 mm Max. speed 50 m/sec. Drive power 11 kW Optional drive power 29 kW Regulating wheel Max. external diameter Ø 250 mm Inner diameter Ø 127 mm Speed 5 - 1'000 min-1 Tilting angle +5° / -5 Drive power 3.7 kW Positioning accuracy In all 3 axes 0,1 µm Resolution of glass scales 0.05 µm Dimensions Length 2060 mm Width, (with door open) 2370 mm (3120 mm) Height, (with door open) 1950 mm (2100 mm) Weight 5500 kg Compressed air Max. pressure 16 bar Air consumption 165 L/min Air consumption with straightening spindle 250 L/min Temperature +15° / +40° C. errors and omissions excepted-data given without obligation

Condition: reconditioned (used), Year of construction: 1992, functionality: fully functional, center height: 150 mm, grinding length: 620 mm, center width: 680 mm, grinding wheel diameter: 350 mm, total width: 500 mm, Condition of the machine: The machine is currently in a used, non-overhauled condition. The following work carried out on the machine: - Complete disassembly of the entire machine except for the guides - Replacement of all sealing and wear parts of the entire machine - Replacement of the infeed spindle of the X-axis - Replacement of the main bearing of the workpiece spindle - Replacement of grinding spindle - All machine assemblies are restored to as-new condition Tjdpjrz Nflofx Af Tof Geometry: - Scraping of the X-axis guide - Scraping the Z-axis guide - Grinding the X-axis table - Grinding the Z-axis table - Grinding the upper tables - Grinding of the assembly housing (workpiece headstock, grinding headstock and tailstock) - Creation of measurement report for TSCHUDIN cylindrical grinding machine Painting: The main assemblies are repainted, the rest of the machine retains the original paintwork Electronics: The complete electronics of the machine are checked, tested and defective switches and cables are replaced

Year of construction: 2013, condition: ready for operation (used), A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible. Todpfx Afswwllgj Tjf

Condition: good (used), Machine is in good condition with equipment. Tjdpfxewu Ey Ej Af Tjf

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Todeid Aphspfx Af Tof Further data See : TECHNICAL DATA SHEET With many grinding stones and holders Complete machine documentation available. Machine in stock.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1, center height: 150 mm, center width: 480 mm, New Arrival 1 TSCHUDIN HTG 410 U Hydraulic Universal External and Internal Cylindrical Grinding Machine - Built in 1988 150 mm center height x 480 mm center distance - MK 5 workhead with continuously variable speed. Tedpfx Aovdumbsf Tjf Grinding wheels on the left and right - swiveling internal grinding unit with 18,000 rpm Machine with four-axis digital display - X-axis - Y-axis and rotary encoder with 1 mm reading when swiveling of the universal grinding headstock and workhead! Pneumatic air cushion lift for effortless swiveling of the workhead and grinding head. Machine with four-jaw chuck, halogen lamp and paper belt filter, foldable dresser, and balancing mandrel. Guideway re-scraped in x-axis. And the entire machine was checked by a specialist. Automatic cycle with "rapid traverse before automatic infeed - spark-out time - infeed back - infeed dimension is maintained." Very little-used machine from prototype construction! Price upon request. (Domestic plus 19% VAT.) Technical specifications are non-binding – subject to prior sale and errors. Sincerely, INDUBA GmbH Mathias Becker D-78628 Rottweil

Condition: good (used), Center height: 100 mm Distance between centers: 380 mm Grinding length: 380 mm Tjdpfx Asfg U A Njf Tef Workpiece headstock: MK5 Tailstock: MK3 Grinding wheel size: max. 350 x 50 x 127 Space requirement of the machine: about 2'020 x 1'200 x 1'450 mm Equipment: -with band filter

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, Data Machine type: HTG 610 U Workhead: MK5 Tailstock: MK3 Center height: 150 mm Tjdpfxecgtp Es Af Tsf Center width: 680 mm Grinding length: 620 mm Grinding wheel left: 350 x 50 x 127 mm Grinding wheel right: 250 x 25 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: new, Year of construction: 2025, functionality: fully functional, Data Tedpfx Ascgkursf Tjf Machine type: HTG 310 Workhead: MK5 Tailstock: MK3 Center height: 100 mm Center width: 380 mm Grinding length: 380 mm Grinding wheel: 350 x 50 x 127 mm Condition The machine is currently in a used (not reconditioned) condition. All wear parts of the machine will be replaced, including the feed spindle in the X and Z axis. All components will be returned to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry The machine will be completely dismantled down to the guides. Before the geometry of the individual tables and components can be restored, both guides of the Z and X axis are manually scraped and restored to as-new condition. Upon completion, the machine is issued with a test certificate according to the manufacturer’s specification.

Condition: refurbished (used), Year of construction: 2025, center height: 100 mm, center width: 680 mm, total length: 620 mm, grinding diameter: 199 mm, Condition of the machine: The machine is currently in a used, unrevised condition. All wearing parts of the machine are replaced, including the feed spindle in the X-axis, and all assemblies are restored to a new condition. After the revision, the machine is easily comparable to a new machine. Geometry: The machine is completely dismantled except for the guides. Before the geometry of the individual tables and assemblies can be restored, the two guides of the Z and X axes are scraped by hand and restored to a new condition. After the work is completed, the machine receives a measurement report according to the manufacturer's original specifications. Electronics: The electronics and the control cabinet housing are completely replaced. All electrical parts are replaced, including the motors. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is overhauled and the hydraulic lines are replaced with new lines. Painting: As soon as the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are freed of the old paint, cleaned and repainted. Technical data of the machine: Center height: 100 mm Center width: 680 mm Grinding length: 620 mm Grinding wheel: 350 x 50 x 127 Weight and space requirement of the machine: 2600kg // 2320x1400x1450 mm Machine equipment (standard): • 1 piece grinding headstock Ø35 • 1 piece workpiece headstock MK5 • 1 piece protective cover for discs Ø 400 mm Tedpfjv Hqlrjx Af Tjf • 1 piece tailstock MK 3 standard • 1 piece flange Ø 127 mm • 1 piece hydraulic unit • 1 set of operating tools and operating instructions

Condition: used, Year of construction: 1994, Technical details: grinding diameter: 198 mm grinding length: 200 mm z-axis: längs:240 mm x-axis: quer: 340 mm control: Tschudin CNC E 9034B grinding wheel diameter: 500 mm centre height: 100 mm Distance between centres: 300 mm max. workpiece weight between centres: 100 kg Tjdpfx Afsu Ng A Nj Tjf interface: RS 232 total power requirement: 16 kVA weight of the machine ca.: 4,5 t space requirement of the machine approx.: L:3,1xT:3,2xH:2,0 m Plunge type grinding automatic technical specifications: - grinding spindle tool intake: 203,2mm - grinding spindle not swiveling - workpiece spindle swivelling : +30° to -90° - tailstock collet cone = MK 3 - control: ISO - and graphically programing equipment: - electronical balancing device : AB 100 T.K. - grindig wheel changing aid - grinding disc dressing device (also for grinding forms programable) - cooling system with paper filtering system - Measuring device (out of function, integrated measuring control not connected) *

Condition: refurbished (used), Year of construction: 2025, Manufacturer: TSCHUDIN Machine type: SL 105U Year of construction: 2024 Workpiece headstock: MK6 Tailstock: MK4 Center height: 175 mm Tjdpfjd Adfuox Af Tjf Center width: 1000 mm Grinding length: 1000 mm Control: Siemens 840D SL Space requirement of the machine: 4920x3400x2300

Condition: used, TECHNICAL DETAILS Tjdjuhbxyopfx Af Tsf - Distance between tips: 400 [mm] - Tip height: 125 [mm] - max. workpiece weight between tips: 150 [kg] - Z axis stroke : 600 [mm] - Z axis rapid feed : 15 [m/min] - Table orientation : +/- 6 [°] WHEELHEAD - grinding wheel dimensions: 500 x 80 x 203.2 [mm] - peripheral speed: 60 [m/sec] - Power : 9.5 [kW] - head position : -30 [°] WORKPIECEHEAD - Type of cone : CM5 - Speeds : 5 - 1500 [rpm] - Power : 2.1 [kW] - Bore : 34 [mm] TAILSTOCK - Cone : CM3 - Quill stroke : 80 [mm] POWER SUPPLY - Voltage: 400 [V] - Frequency: 50 [Hz] - Installed power: 16 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.650 x 3.050 [mm] - Machine height : 2.000 [mm] - Machine weight : 4.850 [kg] MACHINE HOURS - Number of working hours : 42000 [h] EQUIPMENT - CNC : Siemens 840 D - Remote electronic handwheel - Automatic tailstock - Diameter and length control - Loading/unloading robot - Cooling unit - Coolant tank - Oil mist extractor - Wheel diamer - 2nd grinding head with CBN wheel and rotary wheel dresser - Fire extinguisher * *NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Tedpfx Aewftt Uef Tof Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: used, TECHNICAL DETAILS - Distance between tips : 400 [mm] - Tip height : 125 [mm] - Max. workpiece weight between tips : 150 [kg] - Z axis stroke : 600 [mm] - Z axis rapid feed : 15 [m/min] - Table orientation : +/- 6 [°] WHEELHEAD - Grinding wheel dimensions : 500 x 80 x 203.2 [mm] - Peripheral speed : 60 [m/sec] - Power : 9.5 [kW] - Head position : -30 [°] WORKPIECEHEAD - Type of cone : CM5 - Speeds : 5 - 1500 [rpm] - Power : 2.1 [kW] - Bore : 34 [mm] TAILSTOCK - Cone : CM3 - Quill stroke : 80 [mm] POWER SUPPLY - Voltage : 400 [V] - Frequency : 50 [Hz] Tjdpfx Aouhbx Hof Tef - Installed power : 16 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3.650 x 3.050 [mm] - Machine height : 2.000 [mm] - Machine weight : 4.850 [kg] MACHINE HOURS - Number of working hours : 31000 [h] EQUIPMENT - CNC : Siemens 840 D - Remote electronic handwheel - Automatic tailstock - Diameter and length control - Loading/unloading robot - Cooling unit - Coolant tank - Oil mist extractor - Wheel diamond grinding device - 2nd grinding head with CBN wheel and rotary wheel dresser - Fire extinguisher * *NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.