Used Scrap Metal for sale (36,528)

Condition: used, Year of construction: 1984, Technical data: Longitudinal travel (x-axis) 15,900 mm Horizontal feed path (z-axis) 790 mm Vertical feed path (y-axis) 500 mm Swivel range of the milling spindle 45°F +/- Milling spindle drive power of the DC motor 50 kW Milling spindle diameter in the front bearing 160 mm Inside tool holder ISO No. 50 DIN 2079 Outside tool holder ISO No. 60 Tool feed - manual via threaded rod M24 Spindle speeds continuously adjustable in 2 ranges from 50-500 rpm. Speed range in the 1st stage 50-250 rpm. Speed range in the 2nd stage 100-500 rpm. Step step 1:2 Range of constant power 160 rpm. Max. torque on the milling spindle 2,000 Nm Milling feed in the x-direction continuously adjustable from 40-4,000 mm/min. Rapid traverse 8,000 mm/min. Adjustment speed in the y and z-direction continuously adjustable from 20-500 mm/min. Rapid traverse for the y and z-axis 1,000 mm/min. Max. swivel speed for the milling spindle 2°/sec. Display resolution of the 3 axes (positioning accuracy) 0.1 mm Operating voltage 380 volts 50 Hz Control voltage 220 volts Distance from the clamping table to the retracted, horizontally positioned milling spindle nose 500 mm Hodpfx Ajvvll Ssfionu Distance from the cheek support (floor) to the middle of the milling spindle in the vertical middle position 1,300 mm Distance from the clamping table to the middle of the support guide 2,300 mm Length of the cheek and support guide 16,800 mm Weight approx. 23,000 kg Defects: some leaks on the clamping cylinders

Year of construction: 1997, operating hours: 6,542 h, condition: ready for operation (used), This Salvagnini P4M-2512 was manufactured in 1997. It operates on 400V, 50Hz, with a nominal current of 38A and a short circuit current rating of 10kA. It can process panels up to 2500mm diagonal and 1.5mm thickness, and includes a cooling unit and feed table. If you are looking to get high quality sheet metal processing capabilities consider the Salvagnini IP 54 machine we have for sale. Contact us for more information. Application Types Hodpfxjxn Dmhj Afienu Other Sheet Metal Machinery

Condition: new, Year of construction: 2025, Optimum Optisaw SD 500 Double miter metal band saw with swiveling saw bow Art. no. 3292380 length approx. 2122 mm width/depth approx. 1046 mm height approx. 1497 mm Weight approx. 522 kg Electrical data Motor power coolant pump 100 W Total connected load 3.8 kW Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 35 / 70 m/min Saw band length 3770 mm Saw band width 34 mm Saw band thickness 1,1 mm Cutting angle 45 - -60 ° Feed Hydraulic via lowering cylinder Lifting of saw bow manually Cutting ranges 0° round (solid material) 355 mm 0° square (solid material) 280 mm 0° rectangular upright (solid material) 280 x 490 mm -45° round (solid material) 290 mm -45° square (solid material) 250 mm -45° rectangle standing (solid material) 250 x 250 mm +45° round (solid material) 355 mm +45° square (solid material) 280 mm +45° rectangle upright (solid material) 280 x 340 mm +60° round (solid material) 230 mm +60° square (solid material) 180 mm +60° rectangle standing (solid material) 180 x 220 mm Heavy industrial design Low noise operation High cutting accuracy due to vibration-free running Miter adjustment -45° to 60° by swiveling the entire saw bow Hnsdpsgd Si Esfx Afiou High-quality bi-metal saw band as standard equipment Microswitch for automatic end stop Coolant pump Ball bearing saw band guide with hard metal plates for optimal cutting results Easy adjustment of the lowering speed by means of feed control valve in the control panel Large dimensioned quick clamping screw stoc [...]

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Type: DiscMaster SF 2/2 - 1500 Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Minimum air speed at the machine connection : 30 m / s Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Hnodpoxnnfbefx Afiou Weight: 3,400 kg Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Condition: excellent (used), Year of construction: 1990, ##### ATTENTION: SPECIAL PRICE DUE TO BUSINESS CLOSURE ##### Machine type: Vertical metal band saw Manufacturer: INTERKONT Model: Select SB-4 Year of manufacture: 1990 Condition: very good Offer type: used machine Technical data: Cutting height: 305/270 mm Throat: 405 mm Drive type: electric/mechanical Drive output: 0.75/1.1 kW Notes: Butt welding unit, Infinitely variable blade speed, Tilting saw table 500 x 500 mm Weight: 450 kg The machine is in very good and fully operational condition and can be inspected and demonstrated at any time at our premises. Hedpjg Sm Igefx Afionu We would be pleased if our offer is of interest to you. Subject to errors, changes and prior sale.

Year of construction: 2021, condition: excellent (used), For sale: Metal Stamping Press ALP-25J (25T, 2021) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Hedpfx Afjxm U S Seisnu Model: ALP-25J Year of manufacture: 2021-04 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping a wide range of metal components. Technical specifications: Nominal capacity: 25 T Stroke: 100 mm Stroke rate: 100 strokes/min (SPM) Max. die height: 260 mm Height adjustment: 55 mm Ram working area: 560 × 370 mm Bolster area: 250 × 220 mm Country of origin: China Applications: The ALP-25J press is suitable for: - Stamping, cutting, bending, and forming metal components - Small press operations in tool, metal structure, and automotive part manufacturing - Working with thin and medium-thickness sheet metal If you have any further questions, we will be happy to answer them.

Year of construction: 2023, condition: used, Solvent volume: approx. 455 l, heating capacity: approx. 3.3–13.2 kW, compressed air supply: approx. 7–10 bar, max. batch weight: approx. 80 kg, max. throughput: approx. 20 batches/h, control: SIEMENS Simatic HMI Hjdpfx Aoxnakpjfienu

Year of construction: 2015, operating hours: 3,337 h, condition: ready for operation (used), General Data Measurements width 2330 mm Measurements depth 2360 mm Measurements height 1850 mm Machine weight 2500 kg Main Drive Spindle motor power 6 kW Hodpfx Afoxnd Nvjionu Number of axis 2 Additional Equipment Saw Band: 5090 x 34 x 1.1 mm This KASTO Win A 3.3 was manufactured in 2015. A robust metal band saw, it features a 6 kW drive, operates on 400V/50 Hz, and handles a cutting speed of 12-150 m/min. The saw band measures 5090 x 34 x 1.1 mm, and it includes a 120-liter coolant system with a chip conveyor. Ideal for cutting dimensions up to 330 mm in height and 350 mm in width. Contact us for more information about this machine. Application Types Sawing

Condition: new, Year of construction: 2025, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Hjdpfxjg U Uv Ro Afionu length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: new, Year of construction: 2025, -TFON Leveltech® XS-3520 Leveling Machine Hsdpfx Afsityvfoijnu -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety. -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width: 200 mm Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard Control Interface: Touchscreen HMI Machine Weight: 2,000 kg Machine Dimensions(L × W × H): 2,225 × 1,595 × 1,850 mm

Condition: used, Year of construction: 2020, functionality: fully functional, For sale: Metal Stamping Press ALP-25C (25T, 2020) Condition: Virtually unused, like new. Manufacturer: JINAOLAN Machinery (China) Model: ALP-25C Year of manufacture: 2020-11 A compact and reliable mechanical eccentric stamping press designed for forming, punching, and stamping various metal parts. Technical specifications: Nominal capacity: 25 T Stroke: 45 mm Stroke rate: 145 strokes/min (SPM) Hnjdpfexmwniox Afieu Max. die height: 180 mm Height adjustment: 35 mm Ram working area: 170 × 150 mm Bolster area: 370 × 240 mm Country of origin: China Applications: The ALP-25C press is suitable for: stamping, cutting, bending, and forming metal parts; small pressing operations in tool, metal structure, and automotive parts manufacturing; working with thin and medium-gauge sheet metal. If you have any further questions, please feel free to contact us.

Condition: new, Year of construction: 2025, MBSM 150-20 For sanding surfaces, edges and rounding off Powerful motors with vibration-free running to achieve the best sanding results Working height adjustable due to infinitely variable inclination of the sanding unit Workpiece support angle adjustable Continuous flat sanding surface enables sanding of long workpieces as well One suction nozzle each at the spark box and at the rear belt roller Protective disc can be folded away Quick clamping system for changing the abrasive belt in seconds Simple adjustment of the belt run via adjusting screw Motor with brake and circuit breaker Dimensions and weights Length approx. 527 mm width/depth approx. 995 mm height approx. 1025 mm Weight approx. 114 kg Suction Nominal width of external suction nozzle 60 mm Electrical data Supply voltage 400 V Mains frequency 50 Hz Noise emission Emission sound pressure level at the workplace Lp (idling without extraction) 80 dB(A) Hjdpfxshk Df De Afienu Grinding unit Grinding width max. 150 mm Sanding belt length 2000 mm Sanding belt width 150 mm Belt speed(s) 30 m/s Contact wheel diameter 200 mm

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Processing System. Designed for superior versatility and precision, this system is engineered to process mild steel, aluminum, and stainless steel materials with thicknesses from 0 to 120 mm. It offers advanced edge rounding and surface cleaning capabilities tailored to demanding industrial applications -Material Compatibility -Mild Steel, Aluminum, Stainless Steel -Working Thickness Range -0 – 120 mm Edge Rounding: Radius 2 edge rounding for smooth, safe edges that enhance both aesthetics and functionality Precision Control: Integrated Siemens automation system delivers accurate, consistent control throughout processing. Independent Processing Stations: Multiple stations allow simultaneous or sequential processing, offering flexible workflow configurations. Table Size Options: Hnedpfx Afji E Tkajisu Available with 650 mm, 1000 mm, or 1300 mm working widths to suit diverse production requirements. Table Types: Magnetic, vacuum, or magnetic-vacuum tables provide secure, adaptable support for various materials and part sizes. Plasma & Oxygen Technology: Advanced plasma and oxygen systems efficiently remove heavy burrs and dross after cutting, ensuring cleaner surfaces. Surface Purification: Effectively eliminates dirt, rust, oxide, and scale, preparing parts for subsequent processing such as welding or coating Edge Rounding for Coating: Produces uniform, defect-free edges ideal for painting and coating applications. Industry Applications: Steel Service Centers, Energy, Mining, Construction, Automotive — engineered for heavy-duty, high-performance use. Uniform Edge Results: 8 flap wheels work together to deliver consistent radius edges on every part. Pneumatic Oscillation System: Extends abrasive band life and maintains consistent performance by reducing wear through pneumatic oscillation. Engineered for industrial precision. Built for durability. Designed for versatile applications. TFON – Excellence in Edge Processing and Surface Preparation.

Condition: as good as new (ex-display), Year of construction: 2025, OPTIsaw 131 GH - Metal band saw ideal for light sawing work. Mitre sawing from -45° to +60° via swivelling saw bow Metal band saw with low noise operation 3 saw band speeds Ball bearing mounted 3-point saw band guide Three switchable saw band speeds Quick hold of the workpiece due to quick clamping vice Standard with high quality bi-metal saw band Base plate and saw bow made of grey cast iron Material stop emergency stop impact switch, motor protection switch Easy to read scale for angle adjustment Scope of delivery: Material stop Bi-metal saw band (10-14 ZpZ) Machine base Technical data Cutting range 0° Round Ø 128 mm Cutting range 0° rectangle 100 x 150 mm Cutting range 45° round Ø 94 mm Cutting range 45° rectangle 94 x 78 mm Cutting range 60° round Ø 56 mm Cutting range 60° rectangle 56 x 56 mm Lifting the saw-bar manually Feed infinitely variable saw band speeds 22/31/55 m/min. Saw band dimensions 1638 x 13 x 0.65 mm Motor power 1,1 kW 230 V ~50 Hz Dimensions Length 1000 mm Width 530 mm Height lower end position saw bow 1060 mm upper end position saw bow 1320 mm Net weight Location: Ex warehouse 54634 Bitburg Hnjdpfxob S Uzro Afiou

Condition: new, Year of construction: 2025, -Tfon Leveltech® S-3513 Leveling Machine -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results -Key Specifications: Material Thickness: 0 – 0.3 mm -Maximum Material Width: 1.300 mm Hodpfx Aekyrzlsfijnu Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.

Condition: new, Year of construction: 2025, Optimum Metal Band Saw OPTIsaw S 275NV Metal band saws with pivoting saw frame. S 275NV with continuously adjustable saw blade speed Item number: 3300265 TECHNICAL DATA Dimensions and weights Length (product) approx. 1400 mm Width/Depth (product) approx. 685 mm Weight (net) approx. 185 kg Max. width/depth (product) approx. 985 mm Max. height (product) approx. 1700 mm Electrical data Drive motor power: 1.5 kW Connection voltage: 230 V Mains frequency: 50 Hz Coolant pump motor power: 90 W Machine data Saw blade speed(s): 20 – 90 m/min Saw blade length: 2480 mm Saw blade width: 27 mm Saw blade thickness: 0.9 mm Cutting angle: 0 – 60° Feed: continuously variable Adjustable Manual saw frame lifting Cutting ranges Cutting range 0° round (solid material) 225 mm Cutting range 0° square (solid material) 190 mm Hnodegx T I Ujpfx Afisu Cutting range 0° rectangular horizontal (solid material) 150 x 245 mm Cutting range +45° round (solid material) 145 mm Cutting range +45° square (solid material) 150 mm Cutting range +45° rectangular horizontal (solid material) 190 x 150 mm Cutting range +60° round (solid material) 90 mm Cutting range +60° square (solid material) 90 mm Cutting range +60° rectangular horizontal (solid material) 120 x 90 mm Explanation of cutting range: Cutting range determined based on the weight of the saw frame with aluminum. May vary depending on the material used and may be smaller (not cutting capacity). SCOPE OF DELIVERY Material stop Bi-metal saw blade Machine base Coolant pump Location: From stock 54634 Bitburg - available immediately -

Condition: new, Year of construction: 2025, -TFON Edge Rounding Machine Specifications: Material Compatibility: Steel, Aluminum, Stainless Steel. Process: Edge Rounding. Material Thickness: 0 – 120 mm Maximum Material Width: 1,000 mm. Hnodpfx Asui Ih Rofieu Minimum Part Dimensions: 50 × 50 mm. Maximum Material Weight: 500 kg. Conveyor Speed: 0.6 – 4.0 m/min Machine Weight: 3.000 kg

Condition: refurbished (used), Year of construction: 2022, -Pre-owned Surfacer Series TFON RB-2510 -This TFON RB-2510 is a reliable, well-maintained pre-owned machine, ready for immediate use. -Previously utilized exclusively in our inhouse production for deburring and edge rounding applications, this unit remains in excellent working condition and is fully operational. It has proven its reliability and durability, making it a strong choice for long-term use in your production line Hnjdpsiih Aaefx Afisu

Condition: new, Year of construction: 2025, -TFON Edge Rounding & Surface Purification System -Material Compatibility Mild Steel, Aluminum, and Stainless Steel. -Working Thickness Range: Accommodates material thicknesses from 0 to 120 mm. -Edge Rounding Provides Radius 2 edge rounding for smooth, safe edges that enhance both the appearance and functionality of the workpiece. -Precision Control: Equipped with a Siemens automation system for accurate and consistent control throughout the entire process. Independent Stations: Multiple processing stations enable versatile operations, allowing different tasks to be performed simultaneously or sequentially Hnedpfxjhq A T Ue Afiou Table Options: Available working table sizes of 650 mm, 1000 mm, or 1300 mm to meet specific production requirements Table Types: Flexible configurations including magnetic, vacuum, or magnetic-vacuum tables ensure secure support for various materials and part sizes. Plasma and Oxygen Technology: Utilizes advanced plasma and oxygen technology to effectively remove heavy burrs and dross after cutting, delivering cleaner and smoother surfaces Surface Purification: Efficiently removes surface contaminants such as rust, oxide, and scale, preparing parts for further processing Edge Rounding for Coating: Prepares parts perfectly for painting and coating by ensuring a uniform, imperfection-free surface Industry Applications: Ideal for Steel Service Centers, Energy, Mining, Construction, and Automotive sectors, offering tailored solutions for heavy-duty applications. Uniform Results: Six flap wheels operate in unison to provide consistent, equal radius edges on every part. Pneumatic Oscillation System: Extends the lifespan of emery bands by minimizing wear and maintaining consistent performance over time.

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System. -Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. Hnedpfx Ashq A Txofisu -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick. -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance. Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability. Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workfl Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime Consistent Radius Output : Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility TFON – Surface perfection, every time.

Condition: new, Year of construction: 2025, -TFON Precision Edge Rounding & Finishing System Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Hnjdpshq Dbmofx Afiou Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time .

Condition: new, Year of construction: 2025, -Custom-Made Machines Tailored to Your Production Needs -Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance.. -Finishing: Hsdpfx Ashq Dbxjfionu Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year

Condition: new, Year of construction: 2025, -Tfon Leveltech® TF M-5516 Leveling Machine Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use -Key Specifications -Material Thickness: 1 – 15 mm -Maximum Material Width: 1,600 mm Minimum Material Length: 110 mm. Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled Overload Protection: Standard Control Screen: Touchscreen Hsdpokyrqfefx Afisnu Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series Models: S-3560, S-3511, S-3513, S-3516 -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation. -Material Thickness: 0.3 mm – 5.0 mm Maximum Material Width -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Hjdpfx Afohwb Utjisnu Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. S-3513: 14.000 kg. Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm

Condition: new, Year of construction: 2025, -Tfon Bevel Wizard® Linear -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm Hnjdpjrt Tpnefx Afisu -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm Emery Band Drum Diameter: Ø400 mm Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.