Used Metal Separator for sale (39,005)

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Rcsdpfxschuvro Acdsb Very stable industrial design. Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Condition: used, Goudsmit metal separator with rotating magnet Rcodpfx Ajyykdyecdob Dimensions: 300 mm x 300 mm x 300 mm Equipped with 8 magnetic bars Motor power: 0.18 kW, 22 rpm

Year of construction: 2016, condition: used, The metal separator, 3 units, from Sesotec, is available for sale. Our GF metal detectors for pneumatic applications provide optimal protection against production downtime, stoppages, and customer complaints. Rodpfx Asyrl Nyocdocb Suitable for steel, copper, non-ferrous metals, and stainless steel.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 500 h, functionality: fully functional, machine/vehicle number: 25-029, total width: 800 mm, total length: 4,700 mm, total height: 1,900 mm, type of input current: three-phase, energy consumption: 2 kWh, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Rcodpfx Ajqabm Eecdsb Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Year of construction: 2021, operating hours: 1,150 h, condition: used, functionality: fully functional, machine/vehicle number: 596091, Wagner NE metal separator 0428/0-18/90/12 G2 RX with residual iron separator neodymium magnetic drum 0421N-30/85-02 and Siemens S7-1200 control, without steel framework, working width: 900 mm Rcodpoyiur Sjfx Acdjb ✔ High separation efficiency thanks to an eccentric eddy current system ✔ Effective combination of NE separation and residual iron separation ✔ Precisely adjustable belt speed ✔ Robust industrial design ✔ Modern Siemens PLC control with touch panel ✔ Ideal for continuous recycling processes

Condition: excellent (used), Year of construction: 2016, operating hours: 5 h, functionality: fully functional, overall weight: 19 kg, type of input current: DC, input voltage: 220 V, total height: 320 mm, control voltage: 24 V, year of last overhaul: 2025, compressed air connection: 4 bar, temperature: 60 °C, Equipment: type plate available, Implantation by gravity fall or full column. Mechanical Description: • Height: 320 mm max • Effective passage diameter: 45 mm • Aluminum ejection valve • Aluminum Chassis • Phenolic resin inner tube (anti-wear option on request) • Overload tolerated above the device: 150kg • Weight: approximately 18kg Conditions of use: • Working temperature: 0 to 60°C • Protection: IP50 • 4 to 6 bar compressed air, water and oil free filtered, quick coupling NW7.2 • Maximum product drop height: 0 to 600mm • Maximum flow rate with standard pellets from 2 to 4mm: 5400 L/H Rodpfxshr R Iuj Acdecb • Detection sensitivity with STANDARD electronics • Ferrous: 0.35 mm • Stainless steel: 0.9 mm • This data may vary depending on the location, vibration or effect may reduce sensitivity.

Condition: ready for operation (used), Archive photo Machine is currently being refurbished, delivery time 3 months Sorting machine for sorting out all non-ferrous and ferrous metals The machine can sort out ferrous metals separately, ferrous iron does not have to be separated out beforehand. Test sorting in the Habdaufkege process possible. The machine will be demonstrated in working order. The sale is without guarantee and warranty, commissioning possible worldwide for an additional charge. Rsdpsiqk Aqjfx Acdecb

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Rcedpfohh A Iyex Acdeb Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Year of construction: 2017, condition: used, Rapid metal detector, metal separator Rjdpsx Nyg Aefx Acdscb Type: 5000/200/75/600 Equipped with stainless steel ejection flap, diameter 200 mm Complete stainless steel design Metal detection diameter: 200 mm Total installation height: 1200 mm Year of construction: 2017 See our other advertisements VMA Wekerom

Condition: used, Metal separator S+S MES 40 diameter 35 mm price: 1.250 € Rodpfx Aemkig Uscdocb contact: Mr. Rainer Eckerle

Condition: not inspected (used), functionality: unexamined, overall weight: 300 kg, cutting length (max.): 400 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates you to collect the item on time between 23/06/2026 and 26/06/2026! Rcjdpfsy D R Igox Acdob TECHNICAL DETAILS Cutting length: 400 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 700 x 1,300 mm Weight: 300 kg External reference: 22

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 2,600 mm, spindle speed (max.): 8,000 rpm, total height: 2,530 mm, total width: 1,950 mm, overall weight: 2,600 kg, feed length X-axis: 500 mm, feed length Y-axis: 320 mm, feed length Z-axis: 420 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, travel distance X-axis: 500 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 420 mm, table length: 800 mm, table width: 260 mm, Equipment: documentation/manual, CNC MACHINING CENTER 532 (VMC 600/22 DIGITAL) The modern CNC Machining Center 532 is a compact and efficient solution designed for precision metal machining. Thanks to its rigid construction, high accuracy, and flexible control configuration, it is ideal for both serial production and small-batch or custom work. This machine combines precision, reliability, and versatility, making it a perfect choice for manufacturing companies, tool rooms, and CNC workshops. ⚙️ Key Features BT40 spindle / 8000 rpm Suitable for milling, drilling, and tapping operations. Tool magazine 10–12 positions (bamboo hat type) Ensures fast and efficient tool changes. Flexible CNC control options Siemens 808D / 828D, Fanuc Oi-MF, or GSK. Fully enclosed machine design Ensures operator safety and a clean working environment. High accuracy and repeatability Positioning accuracy: 0.005 mm Repeatability: 0.003 mm / 300 mm 📐 Technical Specifications Main motor power: 3.7 kW Max. spindle speed: 8000 rpm Rsdjy Ht Axepfx Acdecb Spindle taper: BT40 Table size: 800 × 260 mm Travels (X/Y/Z): 500 / 320 / 420 mm Spindle-to-table distance: 90 – 510 mm Machine weight: 2600 kg Machine dimensions (L × W × H): 2600 × 1950 × 2400 mm 🏗️ Stability & Precision The compact and rigid structure ensures stable machining even under demanding conditions. Reduced vibration results in high surface quality and dimensional accuracy, making this machine suitable for precision production environments. 🚀 Applications Milling Drilling Tapping Machining of steel, aluminum, and alloys Suitable for: Serial production Tool rooms CNC workshops Manufacturing companies 💡 Additional Options High-pressure coolant / through-spindle cooling Tool measurement and probing system Digital readout (DRO) Increased table load capacity Extended control configuration options ✅ Key Advantages ✔ Excellent price-to-performance ratio ✔ High precision and repeatability ✔ Compact and stable construction ✔ Versatile applications ✔ Flexible CNC control options 📦 Additional Information Model: CNC 532 Manufacturer code: VMC 600/22 DIGITAL Condition: New, original packaging

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total height: 1,600 mm, total width: 1,000 mm, overall weight: 1,500 kg, input voltage: 400 V, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. HYDRAULIC PRESS BRAKE 1320x40 MM Touchscreen control + SERVO The press brake is used for sheet metal forming. During the ram cycle, the sheet can be bent to match the required geometric profile. The machine can be used in many industries, including electromechanical, light industry, agricultural machinery production, shipbuilding, automotive, and aerospace industries. Technical Data: Nominal force: 400 kN (40 tons) Working table length: 1320 mm Distance between columns: 900 mm Throat depth: 180 mm Ram stroke: 100 mm Daylight: 290 mm Back gauge range: 500 mm Approach speed: 80 mm/s Rcjdpoyr N E Eofx Acdsb Working speed: 9 mm/s Return speed: 80 mm/s Main motor power: 4 kW Dimensions: 1500 × 1300 × 1600 mm AMADA Tool Clamping System: Each press is equipped with a quick and safe tool clamping system. The Amada-Promecam system is a reliable manual technology that allows fast tool insertion without additional tools. Control System MTP 3212: Modern controllers combining ease of use with advanced programming capabilities. Touchscreen interface Automatic bending angle calculation Storage of thousands of programs Functions: Manual programming (no visualization) Tool library and editing SD card memory Crowning correction: YES Angle correction: YES Axis correction: YES Safety: Side guards – protection against accidental contact Light curtains – stop the machine when intrusion is detected Rear safety zone – prevents access from the back Delivery available. Transport cost quoted individually.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,580 kg, input voltage: 400 V, total length: 1,180 mm, total width: 1,600 mm, total height: 2,310 mm, 40T OPEN BACK ECCENTRIC PRESS Professional eccentric press with a rigid and durable construction designed for punching, stamping, bending and forming metal components. The open back frame design provides convenient access to the working area and excellent operating ergonomics. The machine is equipped with a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems ensuring reliable and safe operation. Main machine features: • Open back frame design • Rigid and durable machine construction • Fixed working table • Horizontally mounted crankshaft • Transversely mounted crankshaft • Dry pneumatic friction clutch • Adjustable slide stroke • Lifting balance device • Safety valves Rjdpfx Aeytdl Aocdscb • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Press force: 40 t • Stroke under nominal load: 6 mm • Slide stroke: 120 mm • Number of strokes: 55 strokes/min • Max. die height: 220 mm • Die height adjustment: 80 mm • Throat depth: 260 mm • Working table width: 480 mm • Working table length: 710 mm • Working table thickness: 80 mm • Table hole diameter: Ø180 mm • Bed opening dimensions: Ø200 × 150 × 300 mm • Slide bottom surface width: 270 mm • Slide bottom surface length: 320 mm • Max. body inclination angle: 25° • Distance between columns: 300 mm • Punch hole diameter: Ø50 mm • Punch hole depth: 70 mm • Motor power: 4 kW • Overall dimensions: 1600 × 1180 × 2310 mm • Weight: 3580 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. Additional Information If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 3,100 kg, input voltage: 400 V, total length: 950 mm, total width: 1,460 mm, total height: 2,380 mm, 25T OPEN BACK ECCENTRIC PRESS Professional eccentric press with a rigid and durable construction designed for punching, stamping, bending and forming metal components. The open back frame design provides convenient access to the working area and excellent operator ergonomics. The machine is equipped with a transversely mounted crankshaft, dry pneumatic friction clutch and advanced safety systems ensuring reliable and safe operation. Main machine features: • Open back frame design • Rigid and durable machine construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: Rjdpfx Ajytcvgjcdocb • Press force: 25 t • Stroke under nominal load: 3 mm • Slide stroke: 10–110 mm • Number of strokes: 80–120 strokes/min • Max. die set height: 250 mm • Die height adjustment: 50 mm • Throat depth: 210 mm • Distance between frame columns: 450 mm • Working table width: 700 mm • Working table length: 400 mm • Working table thickness: 80 mm • Outer table hole diameter: Ø170 mm • Table hole depth: 20 mm • Inner table hole diameter: Ø150 mm • Slide bottom surface width: 360 mm • Slide bottom surface length: 300 mm • Punch hole diameter: Ø40 mm • Punch hole depth: 60 mm • Motor power: 3 kW • Overall dimensions: 1460 × 950 × 2380 mm • Weight: 3100 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Delivery Delivery to the customer is possible. The delivery cost is determined individually based on the carrier’s quotation. Additional Information If you are interested in other machines, we encourage you to visit our website.

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 1,400 kg, input voltage: 400 V, total length: 1,150 mm, total width: 900 mm, total height: 1,910 mm, 16T OPEN BACK ECCENTRIC PRESS Professional 16-ton eccentric press designed for punching, stamping, bending and forming metal components. The open back frame construction provides easy access to the working area and comfortable machine operation. The rigid and durable construction ensures stable operation even during intensive industrial use. The machine is equipped with a dry pneumatic friction clutch and modern safety systems. Main machine features: • Open back frame design • Rigid and durable construction • Fixed working table • Transversely mounted crankshaft • Horizontally mounted crankshaft • Dry pneumatic friction clutch • Lifting balance device • Safety valves • Manual control • High production efficiency TECHNICAL SPECIFICATIONS: • Pressing force: 16 t • Stroke under load: 2 mm • Slide stroke: 0–70 mm • Number of strokes: 125 strokes/min • Maximum die height: 170 mm • Distance from slide block to frame: 170 mm • Working table dimensions: 320 × 480 mm • Table hole diameter: Ø100 mm • Opening dimensions: 160 × 240 × Ø210 mm • Slide dimensions: 180 × 200 mm • Shank hole size: Ø40 × 60 mm • Distance between columns: 220 mm • Table thickness: 60 mm • Maximum tilt angle: 25° • Motor power: 1.5 kW • Machine dimensions: 1150 × 900 × 1910 mm • Weight: 1400 kg Equipment: • Light curtains • Mechanical guards • Ejector in lower table Delivery conditions: • Delivery to customer possible • Shipping cost calculated individually • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity Additional delivery information: Rcjdpfx Asyrr E Iscdsb • Delivery can be arranged throughout Europe • Shipping cost calculated individually depending on customer location • Fast order processing • Personal collection possible • Machine professionally secured for transport

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 400 kg, travel distance X-axis: 440 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 400 mm, total height: 1,700 mm, total length: 1,650 mm, total width: 1,150 mm, wire diameter (max.): 0.25 mm, workpiece height (max.): 400 mm, table width: 380 mm, overall weight: 1,150 kg, table length: 650 mm, empty load weight: 1,150 kg, warranty duration: 12 months, input voltage: 400 V, The EDM32 wire electrical discharge machine is a precision device designed for electro-erosion machining of electrically conductive materials. It is ideal for the production of tools, molds, and components requiring high accuracy and surface quality. The machine enables efficient cutting of complex shapes in both single-piece and serial production. Thanks to its stable construction and well-optimized operating parameters, the EDM32 ensures high productivity and repeatability of the machining process. The device allows cutting at angles up to ±6°, increasing its technological versatility. The use of wire with a diameter of 0.12 to 0.25 mm enables precise machining of even highly demanding components. The machine provides good surface finish quality at the level of 1.6–2.5 Ra, reducing the need for additional processing. High cutting efficiency and stable wire speed ensure optimal performance. The robust construction and maximum table load of up to 400 kg allow machining of heavier workpieces without loss of accuracy. Technical data Table travel: 440 × 350 mm Table size: 380 × 650 mm Max cutting height: 400 mm Wire diameter: 0.12 – 0.25 mm Taper cutting: ±6° Max cutting efficiency: 120 – 150 mm²/min Surface roughness: 1.6 – 2.5 Ra Machining power: 2 kW Wire speed: 11 m/s Max table load: 400 kg Weight: 1150 kg Machine dimensions: 1650 × 1150 × 1700 mm Rjdpfx Asy A N Ezocdscb Applications Mold and die production Toolmaking industry Precision metal machining Production of complex geometry parts

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 224 mm, spindle bore: 52 mm, turning diameter: 360 mm, turning diameter over bed slide: 360 mm, turning length: 1,000 mm, total length: 1,850 mm, total width: 700 mm, total height: 1,290 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 90 rpm, swing diameter over cross slide: 224 mm, metric thread diameter (max.): 10 mm, bed width: 188 mm, Turning diameter in gap: 52 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 90 rpm, type of input current: three-phase, overall weight: 650 kg, Universal Lathe with 2-Axis Digital Readout and Removable Gap Bed 360 × 1000 New version of the popular 360 × 1000 lathe What makes our machine stand out from other popular models available on the market? What do you gain by purchasing from us? What is our new lathe like? Our company focuses on: PRECISION – Reinforced spindle bearing system that extends the service life of the lathe and increases machining accuracy. INNOVATION – The latest model uses only high-quality eco-friendly oils and lubricants, which significantly improve machine operation and reduce noise levels by almost 10 dB. ACCURACY – More precise 2-axis digital readout system. DURABILITY – A reliable machine designed for many years of operation. Technical Specifications Swing over bed: 360 mm Swing over cross slide: 224 mm Distance between centers: 1000 mm Rjdpfx Aceyrq Nxedscb Bed: Induction hardened Bed width: 188 mm Spindle bore: 52 mm Spindle nose: D1-4 Spindle speed range: 90 – 2000 rpm Maximum tool size: 16 × 16 mm Longitudinal feed range: 0.078 – 1.044 mm/rev Cross feed range: 0.018 – 0.238 mm/rev Metric thread range: 0.45 – 10 mm Inch thread range: 2.25 – 40 T.P.I. Tailstock quill diameter: 32 mm Tailstock taper: MT4 Main motor power: 1.5 kW Coolant pump power: 0.1 kW Dimensions: 1850 × 700 × 1290 mm Weight: 650 kg The machine is equipped with a removable gap bed.

Condition: used, Year of construction: 2015, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 55 Hz, type of input current: three-phase, pressing force: 160 t, stroke length: 200 mm, table width: 200 mm, table length: 3,200 mm, throat depth: 320 mm, clearance between the columns: 2,530 mm, retraction force: 160 t, oil tank capacity: 200 l, total length: 3,280 mm, total width: 2,700 mm, total height: 2,000 mm, overall weight: 11,500 kg, Equipment: CE marking, documentation/manual, We offer a used Metal Technics 3200/160 E200 press brake, manufactured in 2015. The press is currently in operation in a production environment. It operates in an intermittent cycle, in a single-shift mode – 8 hours. Oil is changed regularly. Equipment: PRESS BRAKE Model: 3200/160 E200 Serial number: 48342 Year of manufacture: 2015 Motor power: 11 kW Weight: 11500 kg Rjdpfey Um S Njx Acdecb Includes tooling (punches and rotating die). Punch mounting type: Amada. Equipped with light curtains and two backstops. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller model: E21S, stroke rate (max.): 12 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 8 mm, table height: 800 mm, input voltage: 400 V, type of input current: three-phase, overall weight: 7,300 kg, total length: 3,850 mm, total width: 2,345 mm, total height: 1,620 mm, warranty duration: 12 months, Equipment: documentation/manual, type plate available, HYDRAULIC GUILLOTINE SHEAR 8 × 3200 mm Hydraulic guillotine shears are used for straight-line cutting of sheets and strips made of steel, non-ferrous metals, and other materials. Technical data: Maximum sheet thickness: 8 mm Maximum cutting length: 3200 mm Blade rake angle: 1° 30′ Number of strokes per minute: 12 Back gauge travel: 600 mm (standard) Distance between side frames: 3450 mm Blade length: 3300 mm Table height: 800 mm Motor power: 11 kW Rodoyt E U Espfx Acdocb Weight: 7300 kg Machine dimensions (L × W × H): 3850 × 2345 × 1620 mm Equipment: Motorized back gauge Ball guide for the back gauge Hydraulic sheet hold-downs along the entire cutting length Segmented blades with the possibility to replace only the damaged segment Blade gap adjustment Ball transfer units on the table for sheet support Front support arms Front gauge with measuring scale Rear safety guard Front safety guard Foot pedal E21S controller Illuminated cutting line Delivery conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service CE declaration of conformity Operation and maintenance manual in English Delivery to the customer is possible. Transport costs are calculated individually by the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 250 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle bore: 52 mm, spindle speed (max.): 1,810 rpm, spindle speed (min.): 65 rpm, spindle motor power: 2,200 W, total height: 1,650 mm, total length: 1,900 mm, total width: 830 mm, type of input current: three-phase, overall weight: 790 kg, Universal Lathe TORNADO 400 × 1000 – 2.2 kW / 400 V With Digital Readout and Work Light Key Features Precision spindle roller bearings The spindle is equipped with high-precision roller bearings that ensure excellent machining accuracy and reliable operation even during intensive use. High-quality hardened and ground steel gears in the headstock transmission All gears inside the headstock are made from high-grade steel, hardened and ground to ensure smooth, quiet operation and long service life. Easy and quick gearbox operation The intuitive gearbox design allows quick and convenient speed changes and easy adjustment of machining parameters. Powerful drive motor The machine is equipped with a sufficiently powerful motor that ensures stable performance even under heavy loads. D1-5 spindle mounting system The D1-5 camlock spindle system allows quick and secure installation of chucks and other accessories. Wide range of thread cutting capabilities The machine enables cutting of various thread types (metric, inch, module, and others), making it a versatile tool for many applications. Technical Specifications 🔩 Turning Capacity Maximum swing over bed: 400 mm Swing over cross slide: 250 mm Swing in gap: 520 mm Distance between centers: 1000 mm Maximum workpiece length (chuck + tailstock): ~920 mm 🛠️ Slides and Travels Compound slide travel: 125 mm (0.02 mm accuracy) Cross slide travel: 240 mm (0.04 mm accuracy) Longitudinal travel: 750 mm (0.2 mm) ⛓️ Drive and Speeds Main motor power: 2.2 kW / 400 V Coolant pump power: approx. 40 W Spindle speeds: 18 ranges (I/II) 65 – 1810 rpm 🧰 Threads and Feeds Metric threads: 0.4 – 7 mm Inch threads: 4 – 60 T.P.I. Module threads: 0.4 – 3 mm D.P. threads: 8 – 84 D.P. Longitudinal feed range: ~0.053 – 1.291 mm/rev Cross feed range: ~0.011 – 0.276 mm/rev 🧱 Construction and Spindle Bed width: 218 mm Spindle bore: 52 mm Spindle taper: MT6 Spindle nose: D1-5 CAMLOCK Tailstock: Quill diameter: 50 mm Quill travel: 110 mm Taper: MT4 📏 Dimensions and Weight Machine dimensions (L × W × H): approx. 1900 × 830 × 1650 mm Weight: approx. 640 – 790 kg (depending on configuration) Standard Equipment 2-axis digital readout (optical scales) 3-jaw chuck 200 mm + internal jaws set 4-jaw chuck 200 mm Faceplate 280 mm Rcedpfx Aceyr Ihljdjb Steady rest Follow rest Dead centers MT4 – 2 pcs. Spindle reduction sleeve MT6 / MT4 Change gears set Coolant system Working light Lubrication pump Chuck key and toolpost wrench Set of service tools Safety guards compliant with CE standards Operating manual (English) CE Declaration of Conformity Delivery to the customer is possible. Shipping cost is calculated individually by the transport company.

Condition: new, functionality: fully functional, Year of construction: 2026, input voltage: 400 V, Hydraulic C-Frame Press Our hydraulic C-frame press is a professional machine designed for precise and demanding machining operations. Thanks to its C-frame construction, it provides easy access to the working area, allowing the processing of larger components and convenient handling of material from different sides. Key Features High pressing force – ideal for bending, straightening, pressing, and assembling components. C-frame construction – improved ergonomics and excellent accessibility to the working area. Solid steel frame – ensures durability and safe operation. Precise hydraulic control – smooth adjustment of force and operating speed. Industrial and workshop applications – perfect for both large manufacturing plants and smaller workshops. Rcsdpfxeyr Ek Rj Acdjb Thanks to its versatility and robust construction, this press is suitable for many industries, from automotive and metalworking to technical service centers and tool shops. Specifications Pressing force: 250 kN (approx. 25.5 tons) Maximum pressure: 25 MPa Maximum opening: 500 mm Stroke: 200 mm Table dimensions: 500 × 400 mm Throat depth: 200 mm Downward speed: 10 mm/s Return speed: 14 mm/s Motor power: 3 kW

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) Rjdpfont Uc Rjx Acdecb We recommend our vacuum pump 3289 for it. It has a filter and can be cleaned.

Condition: new, Year of construction: 2026, functionality: fully functional, turning diameter over cross slide: 210 mm, turning length: 750 mm, turning diameter: 360 mm, spindle motor power: 5,500 W, rapid traverse X-axis: 4 m/min, rapid traverse Z-axis: 7 m/min, total height: 2,000 mm, total length: 2,280 mm, total width: 1,700 mm, overall weight: 1,800 kg, Equipment: documentation/manual, Technical Data: Rcodpfx Asytrnrocdjb Control system: Siemens 808D Turning diameter over bed: 360 mm Turning diameter over carriage: 210 mm Maximum workpiece length: 750 mm Guideway width: 330 mm Spindle taper: MT6 Spindle bore: 49mm Z axis: 750 mm X axis: 210 mm Chuck: 8” X/Z speed: 4 / 7.6 m/min Number of tools: 6 Tool size: 16 × 16 mm Motor: 5.5 kW Tailstock quill travel: 120 mm Tailstock quill taper: ø55 mm / MT4 Dimensions: 2280 × 1700 × 2000 mm Weight: 1800 kg Additional Equipment: Soft jaws SJ-06 6" (160 mm) – 492 PLN gross Hard jaws HJ-06 6" (160 mm) – 1230 PLN gross Sales Conditions: The machine is brand new 12-month warranty Warranty service Post-warranty service Delivery to the customer is possible. Delivery cost according to an individual quotation from the transport company. If you are interested in other machines, we encourage you to visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, spindle bore: 27 mm, turning diameter: 265 mm, turning length: 750 mm, total length: 1,510 mm, total width: 570 mm, total height: 580 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 115 rpm, bed width: 135 mm, overall weight: 160 kg, METAL TECHNICS POLSKA Professional CNC machines, laser systems and metalworking equipment We are a manufacturer and importer of high-quality metalworking machinery. We supply proven technologies from Poland, Europe and Asia used by hundreds of companies across Europe. For more than 12 years, we have focused on quality, precision and reliability. TYTAN 750 PREMIUM UNIVERSAL LATHE 0.75 kW / 230V WITH STEADY RESTS The TYTAN 750 universal lathe is a reliable and precise machine designed in a simple and practical way. It is perfectly suitable for home workshops, schools and industrial applications. The machine is equipped with a double prism bed for increased rigidity and machining precision. !!! LATHE STAND NOT INCLUDED !!! !!! MACHINE AVAILABLE FROM STOCK – READY FOR IMMEDIATE SHIPPING !!! TECHNICAL SPECIFICATIONS: • Turning length: 750 mm • Swing diameter: 265 mm • Bed width: 135 mm • Spindle taper: MT4 • Tailstock taper: MT2 • Chuck diameter: 125 mm • Spindle bore: 27 mm • Metric threads: 0.2–3.5 mm/rev • Inch threads: 8–56 T.P.I. • Spindle speed range: 115–1600 rpm • Motor power: 0.75 kW • Machine weight: 160 kg • Dimensions: 1510 × 570 × 580 mm Standard equipment: • Change gears Rcedpfx Aoyuc T Iscdeb • Chip guard • 4-way tool post • 3-jaw chuck 125 mm • Chuck guard • Chuck key • Set of jaws • 2 dead centers • Fixed and travelling steady rests (2 times heavier and significantly stronger than in comparable models) • Arbor for drill chuck • Drill chuck NEW FEATURE! Tailstock locking system with quick eccentric clamp. Delivery conditions: • Brand new machine • 12-month warranty • Warranty and after-sales service • CE declaration of conformity • English operation manual included If you are interested in other machines, we encourage you to visit our website.