Used Schaublin 53 N for sale (59)

Condition: used, Technical specifications: X-axis travel: 700 mm Spindle speed: up to 1500 rpm Gjdextnn Tspfx Akysbu Feed rate: 12 - 1000 mm/min Table size: 1100 x 250 mm Swiveling head: yes Dimensions, approx.: 1750 x 1600 x 1850 mm Weight, approx.: 1900 kg

Condition: used, centre height 102 mm centre distance 450 mm spindle bore 25 mm spindle speed: 220 - 2600 Accessories were not checked for completeness Gjdpewbi Hpefx Akysbu Cabinets are not included in the scope of delivery

Year of construction: 2001, condition: good (used), machine/vehicle number: 350110, Fanuc O-MD - 20 tools changer chip conveyor Manufacturing number 350110 Manufacturing year 2001 Manufacturing origin Swiss Voltage 380/50/3 Netweight 5500 kg Custom position 8457.1020 Colour blue Dimensions 2955x2190x2713 mm TECHNICAL DATA : (In view of the constant improvements made to our products, technical data, dimensions and weights appearing in this list are subject to change without notice.) TRAVELS : Longitudinal, X-axis 1020 mm Cross, Y-axis 540 mm Vertical, Z-axis 540 mm Spindle nose to table surface min 155 - max 665 mm Spindle center to column 584 mm TABLE : Length 1120 mm Width 540 mm Max weight 700 kg 3 T-slots von 18 mm Distance between T-slots 160 mm SPINDLE : Taper size BT 40 / ISO 40 Motor power 13 kW Speed range 8000 t/min Torque 82.7 Nm Tool clamp force 800 kg OPTION : Gearbox 8'000 min-1 Torque with gearbox 330 Nm (375min-1) Torque with high speed (12000min-1) 55,2 Nm (2250 min-1) Axis motor Fanuc 1,6 kW FEED : Rapid rates, each axis 30m/min Cutting feed rate, max 12m/min Jog feed rate, max 30 m/min TOOL CHANGER (ATC) Carousel capacity 20 Swing arm capacity -- Swing arm capacity, option 24 Shank type ISO 40 Max. tool diameter 89 mm Max. diameter with 1 empty post 152,4 mm Max. tool weight 6 kg Max. tool length 250 mm CHIP TO CHIP Carrousel-type 6.5 – 8.5 sec. Swing-arm type 2.5 – 4.5 sec. PRECISION Positioning +/- 0,005 mm Repeatability, axis-X 0.002 mm Repeatability, axis-Y and Z 0.002 mm With linear scales (option) 0.002 mm BALL SCREWS : Diameter (all axes) 32 mm Pitch (all axes) 10 mm COOLANT SUPPLY : Tank 360 L Pump capacity 50 L / min Coolant through spindle 20 bar (option) Chips flush (option) Gbodpfx Ajd Ai Ndekyju errors and omissions excepted data gived without obligatio Inventory no 23180123 consisting of : - 1 collet holder ESX-25 ISO 40 with collet Ø 8 mm - 1 do ESX-32 ISO 40 with collet Ø 8 mm - 1 do ESX-32 ISO 40 with collet Ø 20 mm - 1 do ESX-32 ISO 40 with collet Ø 4 mm - 1 do ESX-16 ISO 40 with collet Ø 4 mm - 1 do ESX-40 ISO 40 with collet Ø 20 mm - 1 boring holder Iso 40 BLITZ - 1 cylindrical milling holder ISO 40 Ø 10 mm - 1 do Ø 18 mm - 1 do Ø 24 mm

Condition: excellent (used), SCHAUBLIN 51 5AX CNC is a 5-axis machining center designed for precision, high accuracy and reliability. Working capacities: X300 Y400 Z430 mm; rotary table Ø210 mm; table load V50 H75 kg; A +30/−120°, C360°. Specs: HSK‑A63, 0–20,000 rpm, spindle motor 23 kW, feed 12,000 mm/min, rapid 30 m/min; weight ≈5750 kg; size 2700×1800×2600 mm. Tool magazine 20 places, Ø 80 mm (95 mm free), length 250 mm, tool change 3 s. Accessories: coolant system, water cooler, oil mist extractor FX4000, rinsing gun. Achieves tight tolerances; sectors: watchmaking, aerospace, medical, automotive, machine tools. Gsdpfx Aksyxn Hveyebu

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 310435, Completely overhauled - new painting New workbench - new geometry Manufacturing origin Swiss Voltage 380V 50Hz 3Ph Customs position 8458.1930 TECHNICAL DATA Capacities : - height of centres 102 mm - distance between centre, standard headstock type W 470 mm - distance between centres, headstock type W with reduction unit 375 mm - swing over bed 200 mm - swing over carriage 120 mm Bed : - height-width-length 168-100-1000 mm cast-iron bed with ground inverted-V profile Headstocks : - spindle nose for collets W-25 - maximum bore through collet 19.0 mm - headstock with reduction unit, ratio 1:5 Carriages : - stroke of longitudinal tool slide 90 mm - stroke of transverse tool slide 100 mm - size of tools 12x12 mm Gbedpfx Aodr R Tcekysu Tailstocks : - internal taper of tailstock spindle Morse 2 - spindle stroke, screw- and handwheel-operated 80 mm errors and omission excepted-data given without obligation Inventory no. 2250023, machine comprising: 1 NEW workbench 2000x800 mm with blue Urphen worktop 2000x800x50 mm 1 leg, 1 B750 cabinet with 7 drawers 1xD50/2xD75/2xD100/1xD150/1x200 1 bench for overhead control 1 W-25 workpiece holder without gear reducer with clamping key, serviced 1 serviced cross slide 1 reconditioned aligned tailstock 1 380V/50Hz/3ph motor. 2 speeds 1 used W-25 solid centre 1 set of used W25 collets 1 used Reishauer ZMG 2x3 jaw chuck Ø 110 mm on w-25 flange 1 new set of used Multifix tool holders including -1 type A turret with AG20 stud -2 AD1675 chisel holders -2 AD2090 chisel holders 1 Albrecht self-tightening drill chuck, cap 1-13 mm on CM2 tenon, used 1 used CM2 solid centre point OPTION 1 used tensioner with new belt CHF 1000 + VAT 1 AS TYPE B-8 GRINDING MACHINE with 360° swivel quill max. speed 28,000 rpm, adjustable height, adjustment, ref. 800053 CHF 1,325 + VAT

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Medium spindle speed: approx. 2,800 rpm (3 speed stages) Gbjdpfx Aew Iq Umekyeu Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: good (used), Center height: 130 mm Distance between centers: 450 mm Speed: about 55-3000 U / min Pneumatic clamping system Spindle nose: W 25 Div. W25 collets available Div. holder available BERGER LAHR axis motors Combitec EIP E-500 Control Manual control available Coolant system available Machine lamp available Machine feet Available Dimension (LxWxH): approx 1400x560x1230 mm Weight: approx 550 kg Different "Schaublin 102" models in stock! Gsdpscuhvusfx Akysbu

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 690 kg, Schaublin 13 milling machine, latest generation. The machine is in very good, fully functional condition. Original accessories and tools can be purchased separately. Spindle taper: SK30 / Iso30 X-axis travel: 320 mm Gedpfxez E A Dwo Akyebu Y-axis travel: 150 mm Z-axis travel: 375 mm Spindle speed range, stepless: 58-2000 rpm Central lubrication system. Rapid traverse and feed rates in the X and Z axes. The machine can be inspected and tested under power by appointment in 5023 Salzburg. Delivery possible by arrangement.

Condition: good (used), Center height: 102mm Distance between centers: 450 mm Spindle bore: 32mm reduction gear left.- Right running 2-stage drive Vario Speed: 270-3000 U / min knee circuit Turning diameter over bed: 200 mm Gbsdpscpznhjfx Akyeu Spindle nose: W 20 Tailstock: MK 2 Dimension (LxWxH): approx 140x56x123 cm Weight: approx 550 kg Accessories available Guide available Different "Schaublin 102" models in stock!

Condition: used, Year of construction: 2009, functionality: fully functional, Turning machine with carriage and tooling. Gsdpfjzg Hk Tsx Akyjbu

Condition: excellent (used), functionality: fully functional, Schaublin 135 High-Precision Lathe with 3-Axis K&C Digital Readout NEW and Accessory Cabinet in Excellent Ex-University Condition! Technical Data: >> Centre height: 135 mm >> Distance between centres: 630 mm >> Swing over bed: 315 mm >> Spindle mount: Camlock D1-4 >> Spindle bore: 40 mm >> Longitudinal and cross feeds: 0.025–0.35 mm/rev >> Metric thread pitches: 0.25–14 mm >> Tailstock: MT3 >> Infinitely variable speed range: 55–3000 rpm >> Total power requirement: 4.45 kW >> Weight: approx. 1200 kg Accessories: >> 3-axis digital readout by K&C (new), 12 months manufacturer’s warranty with user manual Functions: Switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction reversal >> Accessory cabinet containing: - 160 mm 3-jaw chuck with two sets of jaws - Multifix B toolholder with 3 pockets - Internal and external collets with quick-change system - Change gears - 4-jaw chuck Gbodjx H Szyepfx Akyju - Face plate - Fixed and travelling steady rests - Coolant system - Centres - Operating manual - And much more About the machine: For sale is a Schaublin 135 high-precision lathe. The machine is in excellent condition, coming from a university and only lightly used. Equipped with a NEW K&C 3-axis digital readout and a comprehensive range of accessories. You are invited to inspect the machine under power on site to verify its condition.

Condition: refurbished (used), For sale is a Swiss Schaublin 13 precision milling machine in fully refurbished condition—better than new. The machine has been completely overhauled in Switzerland. Its geometry has been reworked and the electrical system brought up to the latest standard. All guideways are finely scraped and in perfect condition. All wear parts and spindles have been replaced. Belts are renewed, etc. The machine has not been used since the overhaul. Gedpjyw A Hzofx Akyobu In this condition, it is an absolute rarity and already considered an investment piece. Ideal for high-precision applications or collectors who appreciate a perfect machine tool.

Condition: excellent (used), Year of manufacture: 1973 Gbodpfjzyyn Ssx Akysu Distance between centers: 500 mm Distance between centers (vertical): 125 mm Swinging diameter over bed: 270 mm Swinging diameter over cross slide: 120 mm Spindle bore: 32 mm Spindle nose: Camlock D1-3 Spindle speed: 225 - 3000 rpm Tailstock quill: MK 2 Weight: approx. 930 kg Dimensions W x D x H: approx. 1473 × 730 × 1280 mm Condition: very good Accessories: see pictures Through hole in the chuck: 28 mm Collet system: Schaublin B32 Automatic feed: 4 - 260 mm/min Cuttable metric threads: 0.25 to 8 mm Cuttable inch threads: 112 to 3 threads per inch

Condition: excellent (used), Very good condition Gedpfx Ajy Al Uxskyjbu Digital, Multifix, collets W32

Condition: good (used), functionality: fully functional, pneumatic collet clamping device with collets Gbjdpfxjzmm Dge Akyju

Condition: good (used), SCHAUBLIN 102 lathe, serial number 258639, securely mounted on a workbench (wooden work surface, metal frame, drawer, hinged door, 2 shelves), belt drive. Gbjdpfx Akjztc Ubsyju

Condition: excellent (used), For sale is a set of steady rests for a Schaublin 150 lathe. Very good condition. Includes a set of 3 roller jaws. Price is for the complete set. Shipping available or collection in 5023 Salzburg. Gsdpjy Rdaisfx Akyobu

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Godpfxew Uc Npe Akysbu Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Condition: good (used), SCHAUBLIN 102 lathe, serial number 215617. Gedpfx Akeztc Dpeyobu

Condition: good (used), SCHAUBLIN 70 lathe Godpfx Akjztcz Ueysbu

Condition: excellent (used), With DRO With step-down gear for spindle speeds Center height150 mm Distance between centers 630 mm Turning diameter over bed 340 mm Godjy Iz Ixjpfx Akyjbu Spindlespeeds 55-3000 rpm Spindle bore 40 mm Pitch of leading screw 4 mm Tail stock MK5 Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Working travels 300 x 150 x 355 mm Gbedou Eqixopfx Akyju Table size 700 x 250 mm Spindle taper for collets ISO 30 Spindle speeds 58-2'000 rpm Digital read-out Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1987, Schaublin 125 C precision lathe Year: 1987 Center height 125 mm Gsdpfjy Avyxjx Akysbu Center width 500 mm Speed 45 - 3000 rpm Feed rate 4 - 260 mm/min Spindle nose Camlock D1-3" Tailstock cone MK 2 Turning diameter over bed 250 mm Turning diameter over face slide 120 mm Top slide travel 100 mm Cross slide travel 180 mm Dimension (W x D x H) 1500 x 850 x 1300 mm Weight approx. 950 kg Accessories/options: tool holders Röhm chuck 125mm documentations

Condition: used, Mechanic's Lathe SCHAUBLIN Type 102 Mach. No. 1998 Centre distance: 350 mm Bed length overall from headstock: 635 mm Gedpfx Akoy Dvf Rsysbu Swing over bed: 200 mm Centre height over bed: 102 mm Swing over cross slide: 120 mm Centre height over cross slide: 61 mm Spindle bore: 18/20 mm Spindle speed, gear stage 1: approx. 120 / 190 / 320 rpm Spindle speed, gear stage 2: approx. 590 / 970 / 1500 rpm Chuck mounting: external thread M38 x 3 mm Tailstock taper: MT 1 Drive motor: 0.55 kW, 920 rpm Power supply: 380 Volt, 50 Hz - Spindle speeds adjustable via 2 gearbox stages and 3-step drive belt shifting - Main spindle with forward and reverse operation - Spindle mount with M38 x 3 mm thread - 3-jaw scroll chuck Ø 128 mm with stepped jaws - Collet clamping system with 6 round collets Ø 3 / 4 / 5 / 6 / 8 / 20 mm - Integrated dividing plate on main spindle with 48 / 60 / 100 holes - Toolholder slot approx. 10 x 18 mm with clamping screw - Sturdy wooden base with 42 mm laminated board Required space (with stand): L x W x H: 1160 x 750 x 1300 mm Weight with stand: 150 kg Good condition

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] - Distance between horizontal spindle-table surface : 410 [mm] - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] - Fast feed up : 1200 [mm/min] - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] Gbjdpjuhbw Njfx Akyou - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] EQUIPMENT - Revolving vice - Irrigation system