Precision lathe

Schaublin 102-N80 Vario

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Hnedpfx Aijhzbipo Nok Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Condition: ready for operation (used), Lathe Fabr Takisava Type TAL 510 with lathe chuck + quick-change holder + center punch Hnsdpfx Aovyuuqsi Nsk

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: Hedpfxox D E Hbs Ai Nonk • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: excellent (used), Year of construction: 2017, operating hours: 144 h, functionality: fully functional, machine/vehicle number: 694355, overall weight: 235 kg, load capacity: 16 kg, arm reach: 1,610 mm, This is a KUKA KR 16-2 R1610 industrial robot Year of manufacture 2017 Hsdpfx Aiet N Szpj Nonk We are also happy to offer you this robot overhauled! The robot includes the following options: BoardPackage EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: new, machine/vehicle number: 280270 0001, ADVANTAGES: compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included ICP series - with stepper motor drive and path control GENERAL CNC machines of the ICP series are further developments of the proven CPM series. The introduction of a sliding door means that the machines can now be operated from a seated position, which results in shorter cycle times for hood opening, among other things. The chassis is completely bolted together instead of welded as in the predecessors. This results in greater precision when setting up the machine, as well as improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in lower noise levels. Hnjdpfx Aislkbpzo Nok X = 400mm Y = 300 mm Z = 140 mm Diffuser = 200 mm -in use for over 40 years!!! -over 20,000 systems sold. HIGHLIGHTS compact table machine simple operability 3-axis stepper motor control with path operation Ball screws 2-phase stepper motors CNC control software included Mosaic Safety Circle POPULAR MATERIAL Foam Plastics ACCESSORIES Length gauge Spindles (iFM1000ER, iFM1000WS) Quick clamping system Spannzangen Suction device

Condition: excellent (used), Year of construction: 2012, CNC Control: Heidenhain TNC 620 Axes X-axis travel (mm): 500 Y-axis travel (mm): 450 Z-axis travel (mm): 400 C-axis indexing (degrees): 360° (0.001°) B-axis indexing (degrees): -5° to +110° (0.001°) Feed rates (m/min): 12 Rapid traverse (m/min): 12 Work Table Pallet dimensions (mm): ø630×500 Hsdpfoyzar Nox Ai Nenk Max. workpiece weight (kg): 200 Spindle Max. spindle speed (rpm): 10,000 Spindle drive power (kW): 9/13 (100% DC/40% DC) Tool System Tool holder: SK-40 Number of tools in magazine: 16 Max. tool diameter (mm): With free adjacent pockets (mm): ø130 With adjacent pockets occupied (mm): ø80 Max. tool length (mm): 300 Max. tool weight (kg): 20 Signal beacon CE conformity Coolant gun Direct XYZ measuring system Probe Handwheel Tool measurement Machine operating hours: Power-on hours: 28,826 Spindle working hours: 14,423 Geometry and spindle in very good condition

Year of construction: 1991, condition: ready for operation (used), Axes: 5, max. grinding wheel diameter: 150mm, spindle speed: 9000rpm, workpiece spindle speed: 1500rpm, clamping spindle speed: 13000rpm, travel X/Y/Z: 200mm/190mm/150mm, tool holder: HSK-50, machine dimensions X/Y/Z: approx. 1700mm/1400mm/1800mm, control: NumRoto 1060, control defective. Including coolant pump and coolant tank, grinding wheel set with 12x holders. Documentation available. On-site inspection is possible. Hnodpfx Aevu Dfbji Nok

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, equipped with: 1 slide feeding system right hand side 1 eccentricpress 250 kN Hnedpfotzlzaex Ai Njk 4 standard slide units 1 narrow slide units 1 cam shaft working range: wire diameter range: 0,5 - 5,0 mm stripmetal width: max. 40 mm feeding length: up to 320 mm outout: up to 135/min

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade Hodpfxoif Ek Rs Ai Nenk • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2003, condition: ready for operation (used), Travel X/Z: 210mm/610mm, Travel Y: +/-40mm, Swing over cross slide: 360mm, Spindle bore: 65mm, Tool stations: 12, Tool holder: VDI30, Speed: 4000rpm, Rapid traverse: 24m/min, Feed force: 5000Nm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/2500mm, Weight: approx. 6000kg, Control: Siemens Sinumerik 810D, Operating hours: 4894h. Including oil cooler, parts catcher, power chuck Kitagawa BB08, collet device, turning tool holders and boring bar holders. Documentation available. An on-site inspection is possible. Hnjdpfxsxuvn Do Ai Nek