Used Schaublin 102 for sale (55)

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Todpfxjd Dgdys Ab Djd Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: like new (used), Year of construction: 1997, functionality: fully functional, spindle bore: 40 mm, turning diameter: 340 mm, center height: 150 mm, center width: 630 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 55 rpm, overall weight: 1,450 kg, Schaublin 150A Draai bank Specificatie Manufacturer Schaublin Type 150 Year of manufacture 1997 Besturing conv. Max draaidiam. 340mm Distance between centers 630 mm Hoofdspil Toerental 55 tot 3000 omw/min Opname Camlock D1-4" Spantangopname Schaublin B32 Extras Multifix B plus 7pcs reedschaphouders 3 and 4 klauw Tegencenter Tedswgd R Hepfx Ab Dsd Spantang set Koelmiddel inst. Heidenhain DRO (2-aces) Machine lamp Conusliniaal Fast chip installation Vaste en meelopende bril Enz.

Condition: used, functionality: fully functional, machine/vehicle number: 211433, workpiece weight (max.): 1,200 kg, Offered for sale is a Schaublin 135 lathe in good technical condition. The machine is fully functional with accessories. All guideways are in good condition, and the machine's geometry is sound. All slides run smoothly and evenly. The machine was overhauled in 2002 and has always been serviced according to the manufacturer's specifications. Tjdpov Rxhiefx Ab Ded Please take advantage of the opportunity to view this machine on-site.

Condition: new, schinfa Machinerevisie has been the specialist in revision for over 27 years. We do all this in-house. We can grind up to 2700 mm. We bring the machines far back within the DIN standard. Tedpfx Asfhnr Ijb Djd We can overhaul a machine from you or deliver a machine from us.

Condition: like new (used), Year of construction: 2013, Schaublin UG400 universal grinding machine Year: 2013 NEW, used only a few hours. Height of centers 100mm Distance between centers 400 mm Maximum table travel 425mm Travel speed (stepless) 0.05-5 m/min Minimum stroke 2 mm Table rotation - towards the spindle 30 degree - away from the spindle 3 degree Delay in reversal 0-10sec Handwheel movement of manual feed 15 mm Spindle rotation range 0-90 degree Spindle speed (stepless) 100-1000 rpm Spindle cone 4 Morse Collet chuck diameter 25 mm Engine power 0.2-0.37 kW Chuck diameter (standard) 125 mm Maximum workpiece weight without using tailstock 30 kg Maximum torque 300 kg/cm Maximum workpiece weight between centers 60 kg Grinding wheel size (outer diameter x width x inner diameter) 350x50x127 mm Minimum grinding wheel diameter 280 mm Grinding wheel motor power 3.7 kW Insertion feed system Fast approach 40 mm Additional adjustment 200 mm Feed rate by diameter (roughing) 0.015-6 mm/min Feed rate (finishing) 0.015-3 mm/min Minimum increment of feed by diameter 0.001 mm Tailstock Quill cone 3 Morse Moving the quill 25 mm Fine tuning range 0-0.040 mm Internal grinding spindle Maximum speed of rotation of the spindle 28000rpm Maximum possible spindle size 100mm Accessories/options: Internal grinding spindle 28000 rpm, Fischer Coolant tank paper filter type Grinding wheels Grinding flanges Taolstock Digital readout system Balancing arbor Hand tools Etc... Todpew Tmidjfx Ab Dod Under power in our warehouse, ready for inspection.