Precision turning lathe

Schaublin 180-CCN R-TM

TECHNICAL SPECIFICATIONS

Capacities:
Maximum turning diameter 270 mm
Maximum diameter above the cross slide 160 mm
Center height above the cross slide 83 mm
Maximum diameter above the machine bed 430 mm
Turning length (depending on equipment) 630 mm

Headstock:
Standardized spindle nose, for the use of various chucks and mandrels with adapter accessories.
Accessories for SCHAUBLIN chucks B45/F66
Maximum bar capacity, dia. 36 mm/60 mm
Automatic chuck, standard dia. 210 mm
Direct drive by AC motor, power at 100% / 50% duty cycle 15/18.5 kW
Maximum torque at 100% / 50% duty cycle 135/165 Nm
Maximum spindle speed 4000 min-1
Spindle positioning, increment 0.1°

C-axis:
Programmable increment 0.001°
Spindle lock 80 Nm
Pneumatic clamping cylinder 3400 daN

Cross slide:
Transverse travel, X-axis 230 mm
Resolution along the radius 0.0005 mm
Drive by AC motor, rated torque 3 Nm
Ball screw, X-axis pitch 32 x 5 mm
Longitudinal travel, Z-axis 720 mm
Resolution 0.001 mm
Drive by AC motor, rated torque 6 Nm
Ball screw, pitch 32 x 10 mm

Feeds:
Working feeds, X/Z axes, stepless 0-5000 mm/min
Rapid traverse rates, X/Z axes 8/10 m/min
Feed force, X/Z axes 420/670 daN

Turret system:
Number of tool stations 12
Number of rotating tool stations 6
Drive by AC motor, intermittent duty power 3.7 kW
Maximum intermittent torque 36 Nm
Maximum drive speed 5000 min-1
Standardized tool holder 0VDI 30
Maximum cross-section of cutting tools 20 x 20 mm
Integrated coolant system
Indexing in both directions of rotation

Coolant system:
Tank capacity 120 liters
Pump flow rate 10 l/min
Pressure 5 bars

Inventory 2230043 including:
Dkjdpfx Ahozb U Epj Ion

1 Fanuc 18i control unit
1 A2-6 headstock
1 VDI 30 turret with 12 positions for 6 rotating tools
1 pneumatically operated steady rest 180-65.200
1 SCHUNK Rota-s 200-52 A2-6’’ 1x3 jaw chuck
1 Brucker CM5 rotating center
1 ESX-25 radial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00552
1 ESX-25 axial drilling and milling head, max speed 5000 min-1, without collet EX ref 4100.00550
1 KENNAMETAL ESX-25 dito, without collet EX
1 EWS ESX-25 dito, without collet EX
4 radial tool holders, short, left-hand, Form B2 ref 4100.0100
1 ESX-25 tool holder, Form E3 with EX25 collet and Ø 5 mm collet
1 dito without EX25 collet
3 threading collets Ø 4.5 – 6 and 8 mm
1 tool holder for indexable insert drills, bore Ø 40 mm, Form E1 ref 4100.00124
1 dito bore Ø 32 mm ref 4100.00107
1 dito bore Ø 20 mm ref 4100.00105
1 boring bar tool holder, bore Ø 8 mm, Form E2 ref 4100.00108
1 dito Ø 10 ref 4100.0109
1 dito Ø 12 ref 4100.0110
2 dito Ø 16 ref 4100.0111
1 dito Ø 20 ref 4100.0112
1 dito Ø 25 ref 4100.0113
1 dito Ø 32 ref 4100.0115
1 dito Ø 32 GARANT, long
5 steel protection plugs, Form Z2 ref 4100.00130
1 axial tool holder, left-hand, force C4 ref 4100.00103
1 CM 5 pneumatically operated steady rest ref 180-65.200
1 separate support for microscope ref 180-60.005
1 coolant system

OPTION

1 3-jaw hinged center for Ø 30 – 120 mm ref 180-70.200 CHF 2'500.-- + VAT

Unless otherwise stated, the technical data is provided without guarantee.

The listing was translated automatically. Translation errors are possible.