Used Scarf Tight Mature for sale (518)

Condition: used, We offer a used Poly-clip ICA 8700 Double-Clipper – an industrial automatic double clipping machine designed for closing casings in the production of meat products, formed hams, slicing products, large-calibre sausages and other food products requiring tight and repeatable clipping. The Poly-clip ICA model was designed for large calibres and formed products. The machine can be used with fibrous, collagen and plastic casings. Thanks to the iris separation system, the unit allows short and symmetrical product ends to be achieved, together with an aesthetic and repeatable closing result. The ICA 8700 Double-Clipper can operate together with vacuum fillers and ham pumps, creating an automated station for filling and closing products. After filling, the machine gathers the casing, separates the product and applies clips, which helps increase process efficiency and reduce manual work. The machine is particularly suitable for the production of formed hams, whole-muscle products, mortadella, large-calibre sausages, matured products, slicing products and products packed in casings requiring strong and tight closure. Hnjdszi U Ixspfx Aiteu Poly-clip ICA is a machine designed for plants that need an efficient, hygienic and repeatable clipping system for industrial food production. The stainless steel construction makes cleaning easier, while ergonomic operation supports smooth daily production work. Technical data: Manufacturer: Poly-clip System GmbH & Co. KG Model: ICA 8700 Type: automatic double clipping machine Power: 2.8 kW Power supply: 3 × 400 V Frequency: 50 Hz Calibre range: up to 200 mm Capacity: up to 60 cycles/min in continuous operation Supported casings: fibrous, collagen and plastic casings Application: clipping of large calibres and formed products Main advantages: automatic industrial double clipping machine designed for large calibres and formed products suitable for fibrous, collagen and plastic casings iris separation system for short and symmetrical product ends repeatable and tight casing closure possibility of cooperation with fillers and ham pumps high clipping process efficiency stainless steel construction easier hygienic maintenance reduced manual work renowned manufacturer Poly-clip System solution for the production of formed hams, large-calibre sausages and slicing products

Condition: like new (used), Year of construction: 2020, operating hours: 635 h, functionality: fully functional, Turn and loosen digestate, silage maize and compost in a drying container so moisture escapes evenly and the volume drops sharply, even with heavy, poorly flowing material. This MULTIMIX HD screw mixer from Martin Energietechnik is the heavy-duty version, built for separated digestate that the standard model cannot handle. Built 10/2020, approx. 635 operating hours, as-new condition. Checked, serviced and ready for use by us. All 5 screws are in good condition. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Pickup and transport (750 kg gross) have to be scheduled. Best for: biogas plants and farms that dry digestate, silage maize or compost in containers. Not suitable for: drying containers with dimensions other than those listed below. Fits drying containers with: • Length 6500 mm • Inner width 2314 mm • Inner height 2090 mm • Round-tube track D = 89 mm What the equipment means in practice: 4.4 kW drive motor with heavy-duty chains: strong drive for heavy material, and the automatic chain tensioner keeps the chain tight by itself 5 conical special screws for silage maize and digestate: matched to a container height of 2090 mm Travel drive with 4 driven wheels: the unit moves along the track on its own PLC control with manual and automatic mode: set the pause time of the reversing cycle steplessly, then let it run Trailing cable approx. 10 m with CEE 16 A plug, 5-pole: connects to standard three-phase power Hnsdpfx Aioz Rv Tdotou Complete package: base unit with 4.4 kW motor, chain drive with automatic tensioner, 4-hole flange for the screws, 5 conical special screws, travel drive, control cabinet with PLC (safety functions, manual/automatic mode) and connection cable to the unit. The machine in detail: compared with the standard model, the HD version has, according to the manufacturer, a wider base frame, special screws, higher drive power and a reinforced drive train. Technical data: Martin Energietechnik, MULTIMIX HD, built 10/2020, approx. 635 h, 4.4 kW, CEE 16 A 5-pole, gross/net weight 750 kg / 695 kg, customs tariff no. 8479.8220, country of origin Germany. Condition: as new, usual cosmetic signs of use. Location: 6064 Kerns (self pick-up, transport by arrangement). Price: CHF 15,000. Why you can buy with confidence: built 10/2020, approx. 635 operating hours, checked and serviced by us, all 5 screws in good condition, in-person inspection in Kerns by appointment. Inspect and test before you buy: you may verify identity, condition, completeness and operation at inspection or pickup. We guarantee what we control: the machine is what this listing says it is, complete and functional when you see it. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: this is a single used machine, not ongoing stock. Once sold, this exact configuration is gone. First-buyer bonus: buy by October 27, 2026 and receive CHF 1,000 off, so CHF 14,000 instead of CHF 15,000. Valid until October 27, 2026, or until the machine is sold. Action: send us your intended application, required capacity and destination. We will confirm suitability and provide a transport estimate.

Condition: like new (used), Year of construction: 2025, operating hours: 91 h, functionality: fully functional, machine/vehicle number: SMG25/2-S2H-2x085-603/0,48, pressure: 3 bar, operating pressure: 5 bar, total width: 1,500 mm, total height: 1,700 mm, total length: 2,500 mm, type of input current: three-phase, overall weight: 500 kg, inner dimension width: 650 mm, inner dimension length: 450 mm, inner dimension height: 550 mm, input current: 1 A, input voltage: 400 V, space requirement width: 1,500 mm, construction width: 1,000 mm, space requirement length: 3,000 mm, space requirement height: 2,000 mm, Equipment: cabin, compressor, documentation/manual, lighting, MHG blasting system SMG 25 DUO hand blasting booth with double booth. We offer this like-new MHG SMG25/2-S2H-2x085-603/0,48 sandblasting system, manufactured in 2025. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Identification number: SMG25/2-S2H-2x085-603/0,48 Order number: 2025-105286 Serial number: 11429/07/25 Machine color: RAL 7024 Supply voltage: 230/400 V Frequency: 50 Hz Phases: 3 phases + N + PE Rated current L1: 0.9 A Rated current L2: 0.8 A Rated current L3: 0.8 A Fuse: 3 × C 16 A Wiring diagram version: 1.2.5 DEU PLC program version: 1.2.6 DEU If you have any questions or need more information, please send us a message or call us. ----- MHG blasting system SMG 25 DUO hand blasting booth with double booth. Like new: purchased new from MHG in September 2025 as the 2nd machine, and therefore unfortunately used very little. Currently 91 operating hours in 12 months. Further details upon serious inquiry. Hnjdpfez Eq Epex Aitsu TYPICAL APPLICATION AREAS Precision engineering Medical technology Extremely small, precise components Laboratory applications Toolmaking WORK AREA 650 x 450 x 550 mm each (W x D x H) BLASTING CHAMBER Dust-tight, under-pressure chamber in a robust steel sheet construction WORK GLOVES Special rubber, abrasion-resistant, inner lining cotton, securely connected to the booth to prevent dust leakage DOORS Two side doors, dust-tight closing, double-walled, sound-absorbing foam filling, lockable, with electrical interlock for safety BLAST MEDIA RECOVERY Via a coordinated MHG recovery system OPERATION Separate for each work area, ON/OFF switch for extraction and lighting, pressure regulator, manometer and foot switch VIEWING WINDOWS Safety glass, 500 x 320 mm each, can be replaced without special tools BLASTING CHAMBER LIGHTING Wear-free, mounted externally, very good illumination by fluorescent tube, optional LED lighting unit MHG BLASTING GUNS High-performance blasting gun, MHG system, with optimal efficiency, operated via foot pedal, available with nozzles in different sizes and materials WORKPIECE BLOW-OFF NOZZLES For cleaning the blasted workpieces and the blasting chamber. ENERGY-SAVING FUNCTION - INTEGRATED IN ALL MHG BLASTING BOOTHS: Clearly arranged in the lamp housing: ON/OFF button for light ON/OFF button for extraction fan Both functions have separate energy-saving times (adjustable in the LOGO). The standard settings are 5 minutes for lighting and 10 minutes for extraction. If the blasting booth is not in use, the lighting will switch off after five minutes and the extraction will switch off automatically after ten minutes. Both functions are reactivated by simply pressing the foot pedal, without the blasting booth having to be switched on manually. When a booth door is opened, the lighting is automatically switched on and the energy-saving time starts again. Maintenance indicator light A "Maintenance" indicator light is located on the control panel. This flashes after 1000 operating hours and is reset by the service department. By adhering to the maintenance intervals, the blasting booth is always kept in an technically optimal condition. www.mhg-strahlanlagen.de/de/strahlanlagen/handstrahlkabinen/smg- 25-duo/

Condition: used, Year of construction: 2010, controller model: , _____ Description: Year of manuf. : 2010 TruDisk 3302 laser system :- TRUMPF TruDisk 3302 with a beam quality of 8 mm mrad :- Output power of 3.3 kW at the workpiece :- Laser system with 1 cavity :- Beam delivery system comprising an optical assembly for a single optical path, a fast switch (50 ms switching time) and a pilot laser including electrical control :- Integrated power supply and real-time capable control system for the evaluation and visualisation of operational data :- Fast laser power control :- TruControl 1000 control system :- Storage capacity for 199 laser programmes :- Safety monitoring in accordance with laser safety class 1, including a central safety lock :- Protection class IP54 :- 10.4" panel computer with TFT touchscreen Extension of the beam path :Plus 1 additional laser light cable output, including interface card :consisting of: :# Optical assembly on base plate with fast switch :# Beam safety switch after coupling, if the output is not connected to an LLK Hedpfxoz Sw N Ao Aitonu KUKA Roboter KR 30 HA (High Accuracy) inkl. KRC2 :- Six-axis industrial robot mechanics with articulated kinematics :- Three-phase servo drives for 6 degrees of freedom – maintenance-free and protected against overload :- Absolute position measurement :- The K-IRL programming language enables, amongst other things, a flexible programme structure, freely selectable programme/variable names, etc. :- Telediagnostics module DKP 400.1 Rotate-Tilt Positioner :- Rotation and tilting of workpiece clamping devices in relation :to the robot’s position :- Fully interpolated integration of the rotation and tilt axes :as the 7th and 8th NC axes 3D clamping plate 800 x 100 :- Demmeler System :Clamping of fixtures via 3D worktable, hole pitch 16 :mm / grid 50x50 mm 2, SW 800x100 Two-station rotary table :- Manual two-station rotary table, each side of which can accommodate one component clamping fixture :- Light-tight integration into the safety enclosure :- The fixtures are connected via two support rails each Laser Welding Technology Package :- Manual two-station rotary table designed to accommodate one component clamping fixture on each machining side :- The fixtures are connected via two support rails each :with a 16 mm diameter and 100 mm hole pattern : : Standard cabin :- Dimensions (L/W/H) 4800 mm x 7000 mm x 3200 mm :- Automatic sliding door at the front 2000 mm x 2300 mm :- 1 laser safety screen :- Cab lighting

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Hnsdpfx Aiezwxz Eotju Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: used, Year of construction: 2016, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: -, overall weight: 1,000 kg, total length: 3,500 mm, total width: 500 mm, total height: 1,200 mm, input voltage: 400 V, type of input current: three-phase, cutting speed: 50 mm/min, The Oddy Novatek 2 Pocket Roll Plant with Pinner is used to automatically divide, round, shape, and mould raw bread dough into uniform rolls and buns at high speeds. It replaces the labor-intensive process of scaling and shaping dough by hand, making it a staple machine for small-to-medium commercial bakeries, wholesale bakers, and supermarket in-store bakeries. Hjdez Ad Dcopfx Aitonu 1. Primary Functions: Dividing: It automatically cuts a bulk mass of dough into precise, equal weights without tearing the dough structure. Rounding: It rolls the divided dough portions into tight, consistent round dough balls (baps, dinner rolls). Pinning & Moulding: The integrated "pinner" section flattens and rolls the round dough pieces into elongated shapes (finger rolls, hot dog buns). 2. Specific Bakery Products It Creates: By changing the internal moulding drums or adjusting the pinner belts, bakeries use this machine to produce: Round items: Hamburger buns, traditional baps, dinner rolls, and slider buns. Elongated items: Hot dog rolls, finger rolls, bridge rolls, submarine rolls, and miniature baguettes/batards up to 230mm long. 3. Why Bakeries Use It (Key Benefits): Massive Labour Savings: It can produce up to 6,000 rolls per hour (100 rolls every minute), a volume that would require a large team of bakers to do manually. Cost Efficiency (Oil-Free System): Unlike traditional dividers that require expensive food-grade divider oil to keep dough from sticking, the Novatek uses a completely dry, oil-free process. This saves thousands of pounds annually in oil costs and makes cleanup much easier. Product Consistency: Every roll comes out exactly the same weight (from 10g up to 208g in 2-row mode) and the same shape, which ensures uniform baking times and presentation. Physical Dimensions & Spatial Footprint: Standard Operating Footprint: Typically occupies a width of 0.8 m to 1.2 m and a base chassis length of 1.5 m to 2.5 m. Extended Length with Integral Pinner: When configured with the long-bed outfeed pinner/moulder belt assembly, the total inline workspace length requires approximately 3.2 m to 3.8 m to clear the outfeed table. Operating Height: Roughly 1.6 m to 1.8 m to the top rim of the bulk dough feed hopper to facilitate ergonomic manual or conveyor loading. Total Net Weight: Approximately 950 kg to 1,200 kg depending on the configuration of heavy-duty plunger blocks, internal moulding drums, and chassis reinforcement. Operational & Production Capabilities. Throughput Capacity: Processes up to 50 dough pieces per minute per row. For a standard 2-pocket (2-lane) configuration, this delivers a maximum output of 6,000 pieces per hour. Hopper Capacity: Features a standard integrated bulk dough conveyor hopper that accommodates 55 kg of raw dough. Scaling Ranges: 2-Row Operation: Scales between 10 g and 208 g simultaneously across both lanes. 1-Row Operation: Reaches 208 g to 500 g utilising lane blanking and larger interchangeable plunger blocks. Pinner Capabilities: Accurately stretches and shapes rounded dough pieces into finger rolls, hot dog buns, or miniature batards up to a maximum length of 230 mm. Utility & Facility Requirements: Electrical Supply: Requires a standard industrial 3-phase 400V, 50Hz electrical hookup.

Condition: refurbished (used), functionality: limited functionality, Year of construction: 2003, operating hours: 24,000 h, pipe diameter (max.): 100 mm, pipe length (max.): 4,100 mm, bending angle (max.): 183 °, bending radius (max.): 300 mm, wall thickness: 8 mm, Transfluid DB 2090 DB CNC Mandrel Tube Bending Machine. Excellent High Quality Germany Machine, with fully refurbished main hydraulic pumps and main head fully reconditioned. Only requires new encoder to be fitted and this machine is ready to go. Features include. 100mm x 1.6mm Tube Maximum Capacity at 1.5D Anticipated Mandrel Withdrawal Fully automatic setup of clamps and follower Boosted Follower for tight radius thin wall tube bending. Long bed with 4000mm over mandrel. Hnsdpfxotrd T To Aitou Comes with huge amount of tooling worth over AU$150k. Tooling Included: 101.6mm 152mm CLR 101.6mm 200mm CLR 76.2mm 114mm CLR 76.2mm 200mm CLR 76.2mm 238mm CLR 63.5mm 96mm CLR 57.2mm 86mm CLR 50.8mm 76mm CLR 44.5mm 67mm CLR 40 x 40 120mm CLR 50 x 50 150mm CLR 60.3mm 150mm CLR 48.3mm 120mm CLR

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: manual, actuation type: electric, working width: 600 mm, sheet thickness (max.): 3 mm, sheet thickness aluminum (max.): 3 mm, sheet thickness copper (max.): 3 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 3 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 5 bar, pressure (min.): 4 bar, pressure (max.): 5.5 bar, overall weight: 4,500 kg, total length: 3,000 mm, total width: 2,200 mm, total height: 1,800 mm, Equipment: centralized greasing system, MINO GIOVANI BATTISTA Hedpfx Asyn Shzjitjnu Circular Shears for Cutting Steel Sheets 600 mm x 3 mm – used Coil Slitting Line – MINO GIOVANI BATTISTA + Strip Straightener MINO GIOVANI BATTISTA Max. sheet thickness: 3 mm Max. cutting width: 600 mm Knife sets (more than 50 pieces) Inner coil diameter: 400–550 mm Outer diameter: up to 1,500 mm Max. coil weight: up to 5 tons Decoiler and recoiler with spacers Technical Data Drive type: electric Working width: 600 mm Max. sheet thickness: 3 mm Max. steel thickness: 3 mm Power: 22 kW (29.91 HP) Connection voltage: 380 V Frequency: 50 Hz Total weight: 4,500 kg Total length: 3,000 mm Total width: 2,000 mm Total height: 1,800 mm Equipment • Centralized lubrication system • Pneumatic coil removal from decoiler • The machine is powered and currently installed in production Included Free of Charge Along with the circular shears, we provide a sheet metal cold rolling machine free of charge for achieving tight thickness tolerances. MINO GIOVANI BATTISTA – Rolling Machine Model: LAS Power: 6 kW Weight: 4,500 kg Cold rolling machine (for tight tolerances) Max. material width: 130 mm Max. material thickness: 3 mm Decoiler, belt-driven power transmission Prices Circular shears: EUR 11,000 Rolling machine: EUR 3,500 The rolling machine is included in the package at no extra charge, as it was used together with the line. Disassembly and loading costs: EUR 1,800 Delivery Terms Parity: EXW 10290 Zaprešić – Croatia Loading space length: 6 m Width: 2.2 m Total weight approx.: 9 tons Prices are net of VAT – reverse charge Delivery Time The machine is available 10–15 days after payment. The fixed loading date must be announced at least 7 days in advance for organizing forklift and crane.

Condition: used, machine/vehicle number: 42412110002654, mileage: 288,139 km, power: 70 kW (95.17 HP), first registration: 01/1980, empty load weight: 5,850 kg, overall weight: 6,800 kg, Year of construction: 1980, operating hours: 7,215 h, Equipment: crane, The UNIMOG is equipped with an Atlas AK1402 loading crane, providing versatile applications. Its short wheelbase makes it particularly maneuverable in tight access areas, on forest paths, and in confined work environments. The all-wheel drive ensures good traction on difficult terrain, while the auxiliary gearbox with working group enables slow and powerful operation. The vehicle mounting plate allows for the use of various attachments. Used UNIMOG 1000 with Atlas AK1402 loading crane • First registration: 01/1980 • Mileage (read): approx. 288,139 km • Operating hours (read): approx. 7,215 • Power: 70 kW/95 hp • Unladen weight: 5,850 kg • Permissible total weight: 6,800 kg • Trailer load: braked 22,000 kg, unbraked 1,500 kg • Auxiliary headlights • Exhaust pipe pointing upwards • 12 V electrical system • Auxiliary gearbox with working group • Side drive at the bottom • Mounting plate for attachments (mowing head, grab arm, etc.) • Flatbed: L: 148 cm x W: 190 cm x H: 40 cm Loading crane Atlas AK1402 1 hydraulic extension Load capacities: 3.9 m – 1,030 kg 5.2 m – 770 kg Hjdpoz Aqykofx Aitjnu This offer is subject to change. Errors and prior sale are reserved.

Condition: used, mileage: 10,916 km, power: 68 kW (92.45 HP), gearing type: automatic, fuel type: diesel, color: yellow, overall weight: 8,200 kg, empty load weight: 3,700 kg, maximum load weight: 4,500 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/1981, brakes: other, Year of construction: 1981, operating hours: 10,916 h, driver cabin: day cab, Equipment: all wheel drive, cabin, head guard, standard shovel, * German device * Condition, see photos Hsdov Efnlopfx Aitonu * 10,916 operating hours * Faun Frisch wheel loader F1100B-C * 4x4 all-wheel drive * Bucket approx. 1.3m³ * 4,100 kg front axle * 4,300kg rear axle * Hydrostatic steering with hydraulics * Tight turning circle thanks to articulated steering * Deutz engine 4,710ccm with 68Kw * Protective roof * Speed approx. 35 km/h * Sun visor * Operating weight 8,200kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, roller curve right or left tight division 90°/190°-660-600 IR500 RA2314 Make: Running direction: 90° right running/ left running Roller width (RB): 600 mm conical, plastic coating Nominal/outer width (NB): 660 mm Center roller axle distance: 60mm, 3mm roller distance Inner radius (IR): 500 mm Overall height frame: 120 mm Height including motor: 400 mm Motor MOVI-Mot 3x300-500V 0,25kW 1400 u/min max Brake 220-240V Gear motor: SEW Conveyor speed: 0.6 m/s 2 90° curves can be screwed together to 180° Optionally available: Supports Sideguides Sideguides Frequency converter for stepples speed controll Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, Gattingerstreet 11 B & C, 97076 Würzburg For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Hedpfxeuxg U Ds Aitenu Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1998, Transnorm roller conveyor 3800-900-855 RA2063 Make: Transnorm Roller width (RB): 855 mm Nominal/outer width (NB): 900 mm Length: 3800 mm Roller diameter: 30 mm Roller distance: 38 mm Drive motor: R32DT71D4 Eletrical Data: 380 V, 0,37 kW Height frame: 140 mm including Motor: 300 mm Conveyor speed: please contact us Optionally available: Supports Sideguidesfrequency converter for stepples speed controlling Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Hjdpjra Hp Ujfx Aitsnu For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, machine/vehicle number: 4238442, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 400 mm, table width: 300 mm, table length: 700 mm, type of input current: three-phase, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, input current: 16 A, The Czechoslovak-made TOS FN 32 is an exceptionally robust and precise universal tool milling machine, primarily designed for tool factories and manufacturers of custom and small-batch parts, for precision milling operations. Dimensions: 1200x1080x1345 mm Weight: 830 kg + other accessories 415 kg Noise level: 82 dB Electrical consumption: 380V/2.2-1.9kW/16A Dual spindle system • Precision machining: Thanks to its rigid cast iron bed structure, the machine can maintain tight tolerances (up to ±0.02 mm accuracy). It is equipped with a modern, 3-axis digital readout (DRO). This unit is a Mitutoyo KA Counter. Hnsdpfx Aiey Uv Ruetju Net price

Condition: like new (used), Year of construction: 2019, Hunkeler UW6-22 Unwind Module + RW6-22 Rewind Module Manufacturer: Hunkeler Model: UW6-22 / RW6-22 Year of Delivery: December 2019 Equipment: Unwind / Rewind Modules Condition: Unused since delivery / Stored in original transport packaging Quantity: 2 units Equipment 1. Hunkeler UW6-22 Unwind Module Packing Size: 220 × 145 × 160 cm Gross Weight: 785 kg Hnsdjz Ivbzspfx Aitou Serial No.: Available upon request 2. Hunkeler RW6-22 Rewind Module Packing Size: 220 × 145 × 160 cm Gross Weight: 826 kg Serial No.: Available upon request Technical Specifications According to the original Hunkeler delivery documentation: - Maximum Operating Speed: 100 m/min - Paper Grammage Range: 40–300 gsm - UW6-22 Unwind Module: Slack Web configuration - RW6-22 Rewind Module: Tight Web configuration - RW6-22 Web Tension Range: 10–50 N * Condition & Description Hunkeler UW6-22 Unwind Module and RW6-22 Rewind Module. Both units were delivered to Korea in 2019 and have not been used in production since delivery. They have been stored in their original transport packaging. One package has only been opened from the top for inspection, while the other package remains unopened. Location: Korea Availability: Immediately available

Condition: used, Year of construction: 2007, operating hours: 902 h, General information Year of manufacture: 2007 Drivetrain Drive: Wheel Weights Empty weight: 2.760 kg Functional Mast: articulated arm Lifting capacity: 200 kg Working height: 1.000 cm Dimensions of cargo space: 270 x 100 x 199 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average The Haulotte Star 10 is an electric vertical mast lift with a jib, designed for indoor maintenance, warehouse work, and access in confined spaces. Main Specifications Specification Value Working height 10.0 m Platform height 8.0 m Horizontal outreach 3.0 m Platform capacity 200 kg Platform size 0.78 × 0.98 m Overall length 2.7 m Overall width 1.0 m Stowed height 1.99 m Weight approx. 2,677 kg Power source 24 V / 250 Ah battery pack Drive speed 0.6–5 km/h Gradeability 25% Outside turning radius 1.88 m Turret rotation 345° Vertical jib movement 130° (+70° / -60°) Hsdoz I A Iuspfx Aitonu Ground clearance 10 cm Features * Zero tail swing for working in tight areas. * Electric AC drive motors with smooth proportional control. * Can be driven at full platform height (up to 8 m). * Non-marking tires for indoor use. * Automatic battery watering system. * On-board diagnostic system (Haulotte Activ’Screen). * Forklift pockets integrated into the chassis for easier transport. Typical 2007 Model Data Most 2007 Star 10 units have: * 10 m working height * 200 kg platform capacity * 3 m outreach * Electric 24 V battery system * Operating weight around 2.7 tonnes Exact specifications can vary slightly depending on the serial number, market version, and factory options. = More information = Number of owners: 1 Max. horizontal reach: 300 m Max swing of arm in degrees: 345 Please contact Bas Sindorf , ) for more information

Condition: used, Primus Engineering Type: DST 350 This test setup was designed for performing IP protection tests for “dust” according to, for example, DIN 40050 Part 9 and DIN EN 60529. The test setup is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controls Pre-programmed test sequences Integrated vacuum circuit with flow measurement Technical data: Total electrical power: Max. 5 KW Connection voltage: 400V/50HZ 3-N/PE (16A EEC socket) Dimensions: Width approx. 920 mm, Depth approx. 710 mm, Height approx. 1,770 mm Test chamber dimensions: Width approx. 700 mm, Depth approx. 650 mm, Height approx. 770 mm Volume approx. 350 l Weight: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Operating climate range: Temperature: +12 °C to +30 °C Humidity: 25 % rel. to 75 % rel., non-condensing IP protection tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected IP5X and IP5KX Dust-tight IP6X and IP6KX with and without vacuum Hnsdszgbtispfx Aitou Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 1989, functionality: not functional, turning length: 600 mm, turning diameter: 350 mm, spindle bore: 105 mm, spindle motor power: 22 W, total length: 3,063 mm, total width: 1,660 mm, overall weight: 4,300 kg, Equipment: documentation/manual, The machine is not functioning due to a fault in the regulator. Hedpfszwdamjx Aitenu All the machine's mechanical properties are perfect. The machine is very rigid and can achieve tolerances as tight as 0.01 mm. It can also be used as spare parts.

Condition: used, Year of construction: 2001, Lippert belt conveyor belt transfer GF 1000-550-400 RA2508 Technical data: Conveying length (NL): 1000 mm Framework width (NB): 550 mm belt width (GuB): 400 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): Drive: SEW gear motor S37 DT71D4/MM03/BW1 Hjdpfx Asy R Hb Nsitjnu Electrical data: 50Hz V380-500, kW 0.075 / 0.37 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 64 mm Belt: Type SNB 5 E Year of construction: 2001 Optionally available: Supports Side guides frequency converter for stepless speedcontrol Prices net plus VAT from central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Year of construction: 2012, condition: as good as new (ex-display), functionality: fully functional, This particular unit is from 2012 but has only been used as a display model. It is therefore in absolutely like new and has never been in full-scale production. This model (CA Series) is a custom-designed stretch wrapper built for wrapping products placed on cardboard trays, cardboard bottoms, or underlying cardboard supports. The machine has an integrated chain-driven carrier system (pusher system) that feeds the trays through the shrink-wrap ring to ensure stable and protective packaging. Typical applications: Hnjdpfx Aiey N Uqvstju Products on cardboard trays/cardboard supports: Ideal when items need to be secured to an underlying cardboard base before transport. Bundling and securing: Effective for holding together and protecting smaller units or panels mounted on cardboard backing. Protection against external influences: Provides flexible and tight protection against moisture, dust, dirt, and damage during transport. The machine is available for immediate delivery. Shipping costs apply.

Condition: excellent (used), functionality: fully functional, Complete Cheese Plant located in Ireland available immediately. Current cheese production setup: Cheese blocks are in a 60 kg format to match the process floor moulds, x30 blocks of cheese per vat, x20 vats per run x1.8/vats equals 36.0 tonnes of cheese in 24 hrs. Milk treatment room: Milk separator (originally the milk clarifier) - 22000 ltr Milk Bactofuge - 22000 ltr Plate plant including pasteurization section - 22000 ltr Regens 1+2 from 4C to 30C - 22000 ltr Tetra alfast system (online milk STD) - 22000ltr Whey room: Whey Clarifier - 22000 ltr Whey cream separator - 22000 ltr Whey cooling plant - 22000 ltr Whey cream storage and cooler - 5000 ltr x2 RWBT: RWBT 1 - 30000 RWBT 2 - 30000 Vats: Vats 1 APV 22,000 ltr - Installed Prior 2006 Vats 2 APV 20,000 ltr - Installed Prior 2006 Vats 3 APV 20,000 ltr - Installed Prior 2006 Vats 4 APV 22,000 ltr - 2007 SPX rennet dosing system x2 curd pumps: Hnodpfx Aiszzd Dmstsu Old curd pump 22000/Hr - N/A New curd pump 22000/Hr - 2007 x2 pre-presses and block format: Press-vatic 1 1.8T/hr - 2007 Press-vatic 2 1.8T/hr - 2007 x5 main presses: Press 1 - 0.45T/hr - 2007 Press 2 - 0.45T/hr - 2007 Press 3 - 0.45T/hr - 2007 Press 4 - 0.45T/hr - 2007 Press 5 - 0.45T/hr - 2007 x4 holding tables: Holding table 1 - 2007 Holding table 2 - 2007 Holding table 3 - 2007 Holding table 4 - 2007 Demoulding unit and washer: 2007 MF plant (brine) x1 unit: 1146 litres/Hr - 2007 Brine: Automated crane - Timed/programmed - 2007 Brine basin 1 (14 racks per basin) - 12.6T - 2007 Brine basin 2 - 12.6T - 2007 Brine basin 3 - 12.6T - 2007 Brine basin 4 - 12.6T - 2007 Brine basin 5 - 12.6T - 2007 Brine basin 6 - 12.6T - 2007 Brine basin 7 - 12.6T - 2007 Brine basin 8 - 12.6T - 2007 Brine basin 9 - 12.6T - 2007 113.4T brining capacity Brine mixing silo: x1 mixing tank and auger - 3000 - Prior 2006 Cut and pack room: Ferrai machine (block cutting options) - 5T/Hr - 2017 Cryovac machine - 5T/Hr - 1980 Metal detector - 5T/Hr - Around 2006 DEM labeller - 5T/Hr - 2018 Bypass - 4T/Hr - Around 2010 Robots x2: Fresh (brined cheese) - 5T/Hr - 2007 Mature(ripened)/deboxing - 5T/Hr - 2007 Whey: Liquid whey volume generated per hour or per vat is around 17,500 litres. Solids 6/7%. Kg's of fat removed from the whole milk: Determined by the standardized fat required in the cheese, typically 700-800 litres per hour generated. AVAILABLE IMMEDIATELY. CAN BE VIEWED AT SHORT NOTICE

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, DIOSNA V50 Pharma Universal Mixer / Granulator Year of manufacture 2007 | Double-jacketed for heating/cooling | ATEX | Siemens PLC Manufacturer: DIOSNA Dierks & Söhne GmbH Type: V50 Machine No.: 383-001 Year of manufacture: 2007 High-quality DIOSNA V50 Universal Mixer / Granulator in exceptionally good used condition. The product-contacting interior as well as the mixing and chopping tools are in very good condition and appear almost new. SPECIAL FEATURE – DOUBLE JACKET: The mixing container has a double-walled design and enables the heating or cooling of the mixing material. This allows the product to be temperature-controlled during the mixing or granulation process. Technical data: - Container volume: 52 l - Usable volume: 46 l - Machine weight: approx. 200 kg - Compressed air supply: 7–10 bar - Voltage supply: 3/PE 400 V / 50 Hz - Fuse rating: 25 A slow-blow Mixing tool: - One-piece 3-blade mixing tool - Runs close to the bottom - Frequency-controlled three-phase geared motor - Power: 4.0 kW - Max. synchronous speed: 495 rpm - Protection class drive: Ex II 2G / IP65 Chopper: - Located on the side in the container housing - One-piece 2-blade tool - Two-stage drive - 1,500 / 3,000 rpm - Power: 1.1 / 1.9 kW - Protection class drive: Ex II 2G/3D / IP66 Equipment: - Double-walled mixing container for heating/cooling Hjdpozxq U Hefx Aitsnu - Fully hinged, dust-tight lid - Inspection flap with wiping device - Filter - 1.5" Tri-Clamp connection - Side product outlet with manually operated shut-off piston - Safety monitoring of lid and outlet - Air gap seals for mixer and chopper - Mobile stainless steel frame Control: - Siemens SIMATIC S7-200 PLC - Siemens TP177B touch panel - Manual and automatic operation - Recipe management - Multi-phase process control - Display of mixer speed, power, product temperature and chopper speed - Trend and alarm message display Particularly suitable for intensive mixing and homogenizing of powders, as well as for granulation and agglomeration processes. Original DIOSNA operating manual and control documentation available. Inspection and functional test possible by appointment at CYCRON GmbH in 4226 Breitenbach, Switzerland. Subject to prior sale and errors.

Condition: refurbished (used), Year of construction: 2005, travel distance X-axis: 1,050 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,000 mm, workpiece weight (max.): 20,000 kg, table width: 1,140 mm, table length: 1,640 mm, workpiece length (max.): 2,520 mm, workpiece width (max.): 1,520 mm, workpiece height (max.): 945 mm, feed rate Z-axis: 12 m/min, overall weight: 30,000 kg, table load: 20,000 kg, # OPS INGERSOLL GANTRY 1500 / 64 Bit ## Fully Refurbished – Completion Expected 10/2026 For sale is an OPS INGERSOLL wire EDM machine, model GANTRY 1500 / 64 Bit, manufactured in 2005, which is undergoing a comprehensive and professional overhaul in our facility. Upon completion of the overhaul, the machine will be in very good condition, both technically and aesthetically, and will be prepared for immediate use in reliable production operations. ### Technical Data Manufacturer: OPS INGERSOLL Model: GANTRY 1500 / 64 Bit Year of Manufacture: 2005 Condition: Fully Refurbished Completion: Expected 10/2026 Control: Mitsubishi – 64-bit CNC Generator Power: 70 A – Multipulse Travel Ranges X / Y / Z: 1,050 × 2,000 × 1,000 mm Electrode Changer: 15-position pick-up disc changer Working Tank (W × D × H): 1,520 × 2,520 × 945 mm Workpiece Clamping Table (W × D): 1,380 × 2,380 mm Load Capacity: 20,000 kg ### Accessories * CO₂ fire extinguishing system * Cartridge filter system ## Extensive Overhaul The OPS INGERSOLL GANTRY 1500 is undergoing a comprehensive and professional overhaul in our facility. During the overhaul, the machine will be disassembled to over 70%. All relevant components and wear parts will be carefully inspected and, if necessary, professionally refurbished or replaced. ### The following overhaul work will be carried out: * Inspection and, if necessary, replacement of the ball screws and ball bearings of the X, Y, and Z axes * Inspection and, if necessary, replacement of all four ball screws of the tank drive * Inspection and testing of the C-axis for tightness and accuracy * Geometric inspection of all axes according to the OPS INGERSOLL test protocol * Thorough cleaning of the entire machine base * Cleaning of the entire working tank, including replacement of the felt wipers * Overhaul of the dielectric pumps * Replacement of all hydraulic and dielectric lines Hnodpfx Aijz Atdrstou * Replacement of all pneumatic lines * Thorough cleaning of the control cabinet, generator, and control system * Replacement of all relevant fans and batteries * Overhaul or, if necessary, replacement of power supplies, units, and servo amplifiers * Final laser measurement of the machine after the overhaul ## Quality Control and Erosion Test After completion of all overhaul work, the machine will undergo a comprehensive functional and quality control. This includes, in particular, a detailed erosion test according to the quality and testing specifications of OPS INGERSOLL. The relevant machine functions, as well as accuracy and process reliability, will be checked. ## Ready for Production After Overhaul After successful completion of the overhaul and final inspection, the OPS INGERSOLL GANTRY 1500 / 64 Bit is immediately ready for use. With its high load capacity of 20,000 kg, the generous travel ranges, and the large working area, the machine is particularly suitable for the reliable machining of large and heavy workpieces in demanding production environments. A powerful and comprehensively refurbished wire EDM machine for users who value high machine quality, process reliability, and long-term operational capability. 10/16.

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, RONDO SCM 50 Croissomat – Automatic croissant line Compact, professional line for cutting, separating, and automatically rolling croissants from a sheet of dough. Production up to 4,500 pieces/hour, depending on the format. Hodpfxez Aux De Aitsnu Working width approx. 530–560 mm Automatic cutting of triangles Interchangeable dies according to the desired format Automatic separation of rows Automatic transfer to the rolling unit Adjustment of croissant tightness Suitable for different croissant formats and rolled products Belt speed up to 9 m/min Compact design, ideal for high-volume artisan bakeries and semi-industrial facilities.

Condition: used, Year of construction: 2016, The 2015 FANUC P-250iB/15 is a large-format, 6-axis articulated industrial robot engineered specifically for automated painting, coating, and dispensing applications in hazardous environments. ### Key Technical Specifications * Payload Capacity: $15\text{ kg}$ (Wrist load) * Horizontal Reach: $2,800\text{ mm}$ * Repeatability: $\pm 0.2\text{ mm}$ * Robot Weight: $\approx 530\text{ kg}$ * Axes: 6 controlled axes * Controller Compatibility: FANUC R-30iA / R-30iB series (equipped with an integrated purge unit) --- ### Core Features & Design Highlights * Explosion-Proof & ATEX Certified: Built with a fully sealed, pressurized air enclosure designed for safe operation in flammable solvent environments (ATEX Category 2, Group 2G/2D, Class I/II/III Div 1 standards). * Offset Hollow Wrist & Arm: The internal routing design allows paint hoses and air lines to feed through the center of the wrist and outer arm. This reduces hose whip, avoids interference in tight booth spaces, and prevents debris from contaminating painted surfaces. * Integrated Process Equipment: Designed to mount color valves, pumps, and regulators directly inside or close to the arm. Minimizing the distance between process valves and the spray applicator drastically reduces paint waste and flush cycle times during color changes. * Versatile Mounting Configurations: Supports floor, inverted (ceiling), wall, shelf, and angle mounting to fit compact spray booths. It is also available in left-arm and right-arm offset configurations for symmetrical booth layouts. --- ### Typical Applications * Automotive body and bumper coating * Large industrial component spraying (aerospace, heavy machinery) * Liquid paint dispensing, sealing, and primer application Hedpfx Aisz Drxnstenu

Condition: reconditioned (used), Year of construction: 2022, operating hours: 113 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, Hako Scrubmaster B70 TB650 scrubber-dryer New SIAP 12V 105Ah gel batteries (2x) 2022 model year; 113 operating hours 650mm cleaning head (TB650) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water pickup power from the squeegee Each unit we offer features custom-taken photos; you are buying the exact machine shown Hedpfx Aezzlngsitenu TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 650 Squeegee working width (mm): 950 Theoretical coverage (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 12V 105Ah SIAP gel batteries (2x) NEW 330mm PPL 0.5 disc brushes (2x) NEW 24V 500W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design makes it highly maneuverable; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. The wide working width (650 mm) ensures high area coverage. The control panel is highly legible and intuitive to operate.