Used Scarf Tight Mature for sale (517)

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: Ibedpjx Nuf Hefx Ahyjc 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,330 mm, loading space height: 2,400 mm, loading space volume: 51 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 SHL-Light ? 3-Axle Steel Tipper New Vehicle Expected delivery date: February 2026 General Specifications Type: SKM 36/3 SHL-Light * Design: 3-axle semi-trailer tipper with conical steel trough * Permissible gross weight: 36,000 kg * Axle load: 3 x 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal saddle height: 1,200 mm (technical: 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: front 2,280 mm / rear 2,330 mm * Trough height: approx. 2,400 mm * Trough volume: approx. 51.1 m³ * Overall height: approx. 3,805 mm to loading edge (loaded) Chassis KEMPF welded fine-grain steel construction, sandblasted * Conical-offset design (offset approx. 80 mm) * All attached parts hot-dip galvanized * Chassis color: Jet Black (RAL 9005) * Trough color: White Aluminium (RAL 9006) * Tarp color: Silver (Mehler 911) * Side (white) and rear (red) contour marking to EC Directive Axles, Tyres & Suspension SAF INTRADISC plus Integral (Offroad version) * Disc brakes Ø 430 mm * Chassis laser-aligned (optimized tyre wear & consumption) * Lift axle (fully automatic, forced lowering when unladen) * Air suspension system with compact 300-mm bellows and lift/lower device * Quick air release fitted * Load gauge, tonne graduations, front left * Tyres: 385/65 R 22.5 * Rims: Alcoa Ultra ONE aluminium rims, Dura-Bright EVO, 11.75 x 22.5, ET 120 Braking System & Safety Electronic braking system (Knorr EBS) with RSP (Roll Stability Program) * ABS 4S/2M with stop light supply Isdpfx Asxn Eckohyobc * Tyre pressure monitoring to ECE R141 (TPMS) * Trailer Info Module TIM G2 with brake wear indicator * Acoustic reversing warning system * Folding underrun protection (ECE R58.03) with spring lifting aid * Removable towing coupling (right side) * Reflex panel (200 x 1,130 mm) Hydraulics Front tipper cylinder Hyva (single-circuit hydraulic system, 190 bar) * Hard-chromed piston * Hydraulic connection: Edbro 1" screw coupling * Tractor unit pressure can be adjusted if necessary Trough/Superstructure Conical steel trough (wider towards the rear) * Material: HARDOX steel (HB 450 / HB 500) * Floor: 5 mm HARDOX steel, continuous * Side walls: lower 4 mm / upper 3 mm HARDOX with reinforced edges * Front wall: 20° inclined, 3.2 mm HARDOX steel * Rear wall: * Double-winged (1/3 left, 2/3 right) * Non-swivelling, manual hook locking * Grain-tight with rubber seal * Slide gate 400 x 400 mm, manual lever operation * Rear wall approx. 40 mm lower (tarp can remain open) * Pneumatic vibrator, switch operation rear left * Catwalk with guard rail per accident prevention regulations, ladder left side, 2-step entry * Internal access via steps on the front wall * Shovel and broom mount on front wall Tarp & Roof Bows Roll tarp made of high-quality PVC (680 g/m²), color silver * 3 arched roof bows (1 fixed steel, 2 telescopic aluminium) * Crank operation right side, central locking left side * Aluminium tarp guard, swiveling and lockable * Accessories: stainless steel hooks/tension rod Lighting & Electrics Complete LED equipment to EC/ADR standard * LED three-chamber lights with chrome rings * LED rear fog lamp, LED license plate lighting * LED side markers with indicator function * Brake light (LED) * 2 additional LED reversing lights (side mounted) * Internal trough lighting (LED, switch left on frame with indicator) * Socket: 15-pin Accessories Two PVC toolboxes (each 660 x 500 x 4

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), fuel type: diesel, color: yellow, overall weight: 1,800 kg, empty load weight: 1,800 kg, drive condition: 100 %, chain condition: 100 %, emission class: euro5, digging bucket width: 500 mm, Year of construction: 2026, operating hours: 1 h, Equipment: UVV, additional headlights, adjustable chassis, gripper hydraulics, hammer hydraulics, head guard, hydraulics, onboard computer, rubber tracks, standard shovel, SHANTUI SE17SR – COMPACT 1.8-T MINI EXCAVATOR WITH REMOVABLE CANOPY, PROPORTIONAL CONTROL & MS01 COUPLER Vehicle No. 0121 The Shantui SE17SR is a high-performance 1.8-ton class mini excavator that impresses with its compact dimensions, outstanding stability, and precise hydraulics. Featuring a removable canopy, it is ideally suited for work in confined spaces, indoors, or where height clearance is limited. Perfect for landscaping, earthmoving, as well as municipal and commercial applications. TECHNICAL DATA Engine: Kubota D902, 3-cylinder, 16 hp, EU Stage V Operating weight: approx. 1,800 kg Undercarriage width: approx. 990 mm – ideal for tight job sites Articulated boom for maximum flexibility and reach Digging depth: approx. 2.30 m Ground reach: approx. 3.90 m Dump height: approx. 2.45 m HYDRAULICS & OPERATOR COMFORT AUX 1 & AUX 2 proportional functions, directly controlled via thumbwheels on joysticks Powerful Hengli hydraulic pump – suitable for breaker, grab, compactor, and more Sensitive pilot control for precise operation, just like larger excavators MS01 coupler for fast and secure attachment changes FEATURES MS01 quick coupler Removable canopy for maximum flexibility Articulated boom LED work lights Comfort seat Robust and field-proven construction PRICE €18,995 net €22,604.05 gross FINANCING & INSPECTION Attractive leasing and hire purchase options available for business customers. Inspection and test run possible by appointment at any time. Contact Bagger2Go now – expert advice and a personalized quote included. Ibedex Hx Iajpfx Ahyec

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP 11 – CIP Skid Year of Manufacture: 2020 Design: Pharma / GMP Condition: New, unused, original packaging LEP 11 CS6710 Package 1 Machine Type Pharmaceutical CIP (Cleaning-in-Place) system as a compact package unit mounted on a stainless steel frame. Application Automated cleaning of process plants, chromatography systems, vessels and piping in the pharmaceutical, biotech and chemical industries. Suitable for NaOH, acetic acid, WFI, PW, and other cleaning agents. Technical Data Heating capacity of the CIP medium: from +5 °C to +80 °C in max. 10 minutes Pump performance: 1 – 4 m³/h (adjustable) Operating pressure at CIP supply: 1 – 3 bar (adjustable) Measurement ranges: Iedpfx Asyl Hwlshyobc Flow: 0 – 10 m³/h Temperature: 0 – +150 °C Pressure: 0 – 6 bar Design pressure: -0.9 to +6 bar Design temperature: +2 to +95 °C Construction • Compact package unit on stainless steel frame • CIP supply pump as centrifugal pump • Shell-and-tube heat exchanger with leak-proof design • Height-adjustable ball feet • Fully drainable construction • Maintenance-friendly design • Industrial heavy-duty build Material & GMP Design • Product- and cleaning-agent-contacted components made of stainless steel 1.4435 • Electropolished surfaces Ra ≤ 0.8 μm • FDA-compliant seals (EPDM / PTFE / silicone) • Designed for NaOH 0.3 mol/L at +80 °C • Resistant to acetic acid, WFIH, WFIC, PUW Documentation & Quality • Complete GMP documentation • CE conformity • 3.1 material certificates • Complete welding protocols • Weld seam documentation incl. photo documentation • Documented pressure and tightness tests • FAT documents available • Drainability and final rinse certificates available Condition • New • Unused • Original packaging • No production hours • Immediately available Key Features • Very high thermal cleaning performance • Fully adjustable process operation • Top pharmaceutical GMP design • High-quality European components • Investment-safe system including complete documentation Location: Germany Viewing by appointment possible

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 480 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 100 mm/s, workpiece diameter (max.): 800 mm, total height: 1,680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Tensile force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / Working area: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching arbors "System Rausch" Workpiece diameter: unlimited (removable coolant swivel system) Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced draw bridge made from tool steel for higher tensile forces - Safety door with door interlock, safety interrogation and safety monitoring - Easily removable chip chute with tool extraction protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective covers for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via the swivel system - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labelling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical preparation for external control element (16-pin connector) - Provision for automatic clamping jaw opening during profile broaching with roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool extraction during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical operating unit for broaching and return stroke, as well as emergency stop functionality Note: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably. Ibedpew D E Twofx Ahysc General information: The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks) The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways. Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings. Suitable broaching tools and arbors for the machine are available on request.

Condition: used, OTO MILLS Complete tube mill 168.7 With top of the range equipments OTO MILLS line, EUROLLS rolling, THERMATOOL welding, MAIR packaging machine, BLISSENBACH internal deburring, etc. COMPLETE Tube Mill 168.7 with: 1. OTO MILLS Entry line 2. OTO MILLS 168.7 Forming and sizing system Iedpjxv Aacefx Ahysbc 3. OTO MILLS Cutoff and runout system 4. Electrical and electronic parts 5. Hydraulic power units 6. EUROLLS Complete sets of tooling & spares 7. THERMATOOL HF welder CFI500 kW 8. FOERSTER Online eddy current 9. COTIMPI End facing unit | 6m to 12m length 10. COTIMPI 280 Bar hydro testing unit 11. FOERSTER Offline eddy current: Main bed with drive unit; Testing devices 12. MAIR Automatic packaging machine – Mps Rh200/D/6/Sl 13. BLISSENBACH Tube inside scarfing system – Tube Range I.D. 45 To 165mm Tube diameter: 60,3 – 168,2 mm Square sections: 50x50 – 140x140 mm Rectangular sections: 60x40 – 160x100 mm Thickness: 2,0 – 7,1 mm Tube length: 3 - 12 m Speed: 90 m/min Entry line: OTO MILLS Forming and sizing system: OTO MILLS 168.7 Cutoff and runout system: OTO MILLS Complete sets of tooling & spares: EUROLLS HF Welder: THERMATOOL 500 kW Online eddy current: FOERSTER End facing unit: COTIMPI 6m to 12m length Bar hydro testing unit: COTIMPI 280 Offline eddy current: FOERSTER Automatic packaging machine: MAIR Tube inside scarfing system: BLISSENBACH | Tube Range I.D. 45 To 165mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 7,998 h, color: red, overall weight: 16,200 kg, Authorized SUBARU dealer in Łaziska Górne offers for sale: Kuhn SPW 22 Intense – a self-propelled feed mixer wagon designed for animal feed distribution, equipped with two internal vertical augers (so-called "worms") and an impressive capacity of 22 cubic meters! The machine comes from the first owner, has an original low operating time of under 8,000 engine hours. Regularly serviced and in use. For interested buyers, we can deliver the machine to your specified address – for more information, please contact our sales representatives. The machine is ready for immediate operation, perfect for medium and large farms seeking an efficient, precise, and economical solution for loading, shredding, and mixing TMR. --- IMPORTANT! The feed wagon is equipped with many new components, including: - Conveyor belt - New milling head for the loading rotor - New planetary gearbox - Engine oils and filters freshly replaced at current operating hours TECHNICAL SPECIFICATIONS: Model: KUHN SPW INTENSE 22 Iedjwbqm Rjpfx Ahyjbc Year of manufacture: 2017 Operating hours: 8,000 mth Tank capacity: 22 m³ Machine type: Self-propelled feed mixer with loading cutter DIMENSIONS & WEIGHT Overall length: approx. 10.8–11.0 m Overall width: approx. 2.50 m Height: approx. 3.05–3.10 m (depending on tires) Curb weight: approx. 16,200 kg Turning radius: approx. 8.8 m – excellent maneuverability in tight farmyards ENGINE / DRIVE Engine: 6-cylinder FPT / Fiat Powertrain Power: approx. 165 kW / 224 HP Emission: SCR system / AdBlue Transport speed: up to 25 km/h MIXING SYSTEM 2 vertical augers with speed adjustment up to approx. 55 rpm KUHN technology dual-wing auger tips – improved flow, faster mixing, lower energy consumption High mixture homogeneity and short mixing times Robust mixing chamber – designed for intensive operation LOADING / CUTTER Loading milling head reaches up to approx. 6 meters high – takes silage even from tall silage stacks and silos Smooth speed and cutting force control Fast and clean loading without material spillage Can handle all types of silage: maize, grass silage, alfalfa, brewer’s grains, etc. DISCHARGE PERFORMANCE & FUNCTIONS Conveyor discharge belt with adjustable feeding speed Precise feed distribution directly onto the feeding table or into troughs Chamber designed for complete emptying – no product residue CAB & OPERATION Ergonomic VISIOSPACE operator cab – excellent visibility over the cutting head and working area Grammer operator seat (air suspension) Joystick control Reverse camera Radio Air conditioning Possibility to set automatic mixing and unloading programs TIRES / CHASSIS Typical tire configuration (for this model year): Front: 445/45R19.5 Rear: 315/70R22.5 Chassis engineered for intensive farm use, also on challenging terrain MACHINE CONDITION The machine has 8,000 hours, is fully operational, well-maintained, and regularly serviced. It has been used on a single farm. No hydraulic leaks SCR and AdBlue systems function perfectly All electronics and controls fully operational Tires in good condition (add wear percentage if known) The machine is ready for inspection and testing. Quoted price is net and applies to export and business customers. Personal customers may benefit from a significant discount – We invite you to contact us directly by phone for your best price :)

Condition: excellent (used), functionality: fully functional, Year of construction: 2025, operating hours: 25 h, Powerful low-lift pallet truck in top condition for sale! The truck is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 25h Year of manufacture: 2025 SCHORR fully electric low-lift pallet truck with a load capacity of 1500kg Iedowh Nwuspfx Ahysbc 1500kg load capacity 24V 65Ah AGM batteries Fully electric & self-propelled Ideal for trucks Support wheels included Integrated charger SCHORR electric low-lift pallet truck with a load capacity of 1500kg and maintenance-free AGM batteries. The SCHORR electric low-lift pallet truck is the perfect solution for making your warehouse logistics more efficient and faster. With a load capacity of 1500kg and a fully electric drive, it effortlessly handles the heaviest transport tasks. This saves time and effort and increases the productivity of your employees. The built-in 65Ah batteries are completely maintenance-free and more resilient than the lighter lithium-ion batteries. A stable and consistent power output from the batteries is particularly important for pallet trucks. The battery charger is built into the machine, so you can simply drive to a 230V outlet – without having to carry a separate charger. The electric low-lift truck is also highly maneuverable and, thanks to its compact size, can be easily maneuvered in narrow aisles and spaces. POWERFUL DRIVE FOR EVERY SITUATION The completely maintenance-free 24V batteries with a capacity of 65Ah provide enough power for the pallet truck. Particularly practical: Thanks to the integrated charger, charging the battery is child's play. Simply drive to the outlet, unplug the cable, plug it in, and you're done! The weight of the AGM battery also ensures a lower center of gravity, significantly improving handling. ROBUST AND HIGH-QUALITY CONSTRUCTION The RR15NHE3 impresses with its robust construction, making it suitable for any task – whether in a warehouse, retail store, or truck. The standard support wheels also help, allowing you to move your goods safely and stably. The pallet truck is constructed entirely of solid steel, making it particularly robust and durable. HIGH-QUALITY MATERIALS The wheels of the RR15NHE3 are made of abrasion-resistant and non-marking polyurethane. The tines are equipped with tandem load rollers, and the drive wheel is stabilized by side support wheels. THE USUAL GOOD SAFETY AND OPERATION The ergonomically designed tiller head of the RR15NHE3 makes operation easier for both experienced users and newcomers. The pallet truck is equipped with important safety features such as an emergency brake belly button, an emergency stop button, and a worm gear mode for sensitive loads or tight work areas. Convince yourself of the quality of this fully electric pallet truck and order it today. Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR15NHE3 Load capacity: 1500 kg AGM battery (24 V 65 Ah) Length: 1604 mm Width: 685 mm Height: 82 mm Fork length: 1150 mm Tires: Polyurethane Weight including battery: 145 kg Our competent team is happy to answer any questions you may have about the SCHORR 1500 kg electric pallet truck. We look forward to hearing from you and providing advice.

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Ricoh IP5000 AD3/AD4 128m Iedpfx Ajwk Eiljhysbc Counter A: 100 million Counter B: 80 million Includes Hunkeler UW6 and RW6 with tight web control!! Hunkeler POPP6 Roll2Roll Pictures are available upon request. All of the equipment mentioned is not for sale/resale in Russia, or in any country subject to an EU embargo.

Condition: used, mileage: 137,340 km, power: 78 kW (106.05 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 2,535 kg, maximum load weight: 965 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, fuel consumption (urban): 9 l/100km, fuel consumption (extra-urban): 7.3 l/100km, fuel consumption (combined): 7.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 6,783 mm, loading space width: 2,000 mm, loading space height: 2,100 mm, Year of construction: 2012, construction height: 2,770 mm, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, The Iveco Daily 35 S11 C30C is a professional commercial vehicle that perfectly combines power, comfort, and efficiency. Equipped with a reliable 2,287 cm³ diesel engine, it always delivers the necessary performance to confidently handle even demanding transport tasks. The automatic transmission ensures a relaxed and precise driving experience, reduces driver strain, and makes maneuvering in tight spaces or in stop-and-go traffic especially convenient. With a mileage of 137,340 km and first registration in February 2012, this vehicle is in well-maintained, immediately operational condition. The thoughtfully installed shelving system optimally structures the cargo area, keeping tools, materials, or spare parts secure and easily accessible at all times, significantly improving workflow efficiency. The air suspension enhances ride comfort, protects both driver and cargo, and guarantees smooth, stable handling under all conditions. The integrated rear-view camera increases safety during maneuvering and noticeably simplifies every work assignment. Thanks to the available COC document, quick and hassle-free registration is possible, allowing the Daily to be put to professional use immediately. This vehicle combines robust engineering, practical features, and high everyday usability, making it the ideal partner for trades, commerce, or logistics—helping to make daily operations more efficient, safer, and more comfortable. Ibedpfx Aheyaib Aeyoc Sale only to business customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: refurbished (used), functionality: fully functional, Year of construction: 1968, machine/vehicle number: 51039/373, Rausch RS 6G (WAG 855) Vertical Internal Broaching Machine Manufacturer: Rausch (Haan/Rhineland) Model: RS 6G / 1000 Machine No.: 51039/373 Year of manufacture: 1968 Weight: 800 kg Revision: December 2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch RS 6G, unused with "CE" marking Tensile force: 60 kN (6,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Max. stroke: 1000 mm Max. tool length: 1200 mm Table dimensions / work surface: 610 x 470 mm / 520 x 320 mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: any Dimensions (h x w x d): 1600mm x 850mm x 1000mm (h = table height to floor without attachments) Motor power: 4.4kW / 5.5kW Power supply: 400V / 50Hz Features: - Geared motor drive with 2 working speeds - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with automatic door locking and safety interlock Ibjdpfx Ajv Rmvzohysc - New chip chute with tool storage option - Protective cover for the stroke adjustment - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge, providing additional safety for the operator and tools) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Chip sieve with magnet - Externally adjustable tool length adjustment system (reproducible across all machines) - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely reconditioned. All wear parts have been replaced. The machine has been updated to the state of the art and complies with current CE regulations. The machine is marked with a CE certificate. General The double spindle drive ensures a smooth and central pull point and a constant broaching speed (broaching speed optionally at 3 m/min or 6 m/min). Due to its design, the machine can be quickly and easily set up for broaching with flat broaching tools for keyways. The universal design of the drawbar and machine table allows broaching with profile and flat broaching tools without the use of additional drawing heads. Broaching tools and broaching mandrels suitable for the machine are available on request.

Condition: new, functionality: fully functional, Year of construction: 2024, machine/vehicle number: WAG 3102, Rausch/Wiemers SR 30 (WAG 3102) Vertical Internal Broaching Machine Manufacturer: Rausch/Wiemers Model: RS 3/1000 Machine No.: WAG 3102 Year of manufacture: 2024 Weight: 480 kg Revision: 11/2024 by Wiemers AG General / Technical Specifications: Completely overhauled, mechanical vertical broaching machine Rausch SR 30, unused with "CE" marking Tensile force: 30 kN (3,000 kg) Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / work surface: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90mm for standard broaching mandrels "Rausch System" Workpiece diameter: any (removable coolant swivel system) Broaching capacity / groove width: up to 20mm in steel (from 16mm broaching tool width only with offset tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height to floor without attachments) Motor: 2.5kW/3.0kW 2-stage for 2 working speeds Power supply: 400V / 50Hz Equipment: - Gear motor drive with 2 working speeds - Modified Wiemers "SR" drive system - Reinforced drawbridge made of tool steel for greater pulling forces - Safety door with door lock, safety query, and safety monitoring - Easily removable chip chute with tool storage option - Externally adjustable tool length adjustment system (across all machines) reproducible) - Protective cover for the stroke adjustment and electrical switching units - Oil-tight storage on the control cabinet - Electrical scanning of the clamping jaws (Tool removal control prevents accidental retraction of the drawbridge, providing additional safety for the operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain cock - Coolant swivel system, with automatic coolant switching via the swivel system - Extra-reinforced chip basket and chip sieve with magnetic insert - Stainless steel control panel with durable markings - 4 central lubrication points for the trapezoidal spindle drive with manual grease gun - Electrical preparation for an external control element (16-pin connector) - Preparation for automatic clamping jaw opening during profile broaching via roller lever - Machine documentation with "CE" confirmation declaration Optional additional options: - Automatic clamping jaw opener for easier tool removal during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600 mm - External electrical control unit for broaching and return stroke, as well as emergency stop operation Note: The machine has been completely overhauled. During the overhaul, the machine base, machine body, and machine table were completely refurbished. All other components have been replaced. The drive system has been modified. The machine has been updated to the state of the art and complies with current CE regulations (as of 2024). Ibedpfev Rpnmex Ahyjc General The dual-spindle drive ensures a smooth and central pull point and a constant broaching speed. The machine is primarily designed for the production of keyways up to 20 mm. (From 16 mm keyways, only with stepped tool shanks). Due to its design, the machine is quick and easy to set up for broaching with flat broaching tools for keyways.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 1,740 kg, lifting height: 2,825 mm, tire size: 26 x 12.00 - 12, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, emission class: euro5, mast type: telescopic, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, standard shovel, The H&R 1507T telescopic wheel loader is our smallest telescopic yard loader – perfect for tight work spaces. With a lifting capacity of 700 kg, the H&R 1507T telescopic loader lifts loads of up to 700 kg to a height of 2.82 m. Thanks to the standard wide tires, it is very stable and safe. The new 3-cylinder Perkins engine (Mannheim, Germany) meets the Euro 5 standard even without a particulate filter and is particularly efficient. With the 2-speed hydrostatic drive, the 1507T loader reaches speeds of approximately 16 km/h and is comfortable to drive. The additional hydraulic control circuit allows for the use of various attachments. The hydraulic quick coupler allows for quick and convenient changing of front-end tools. H&R loaders are technically and visually optimized in-house and thoroughly tested. In addition, each machine receives extensive rust protection treatment. Our loaders are CE-compliant according to the EU Machinery Directive. Our machines have a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 1507T Telehandler • Technical and visual optimization in-house • Efficient engine made in Germany • Telescopic boom for greater reach • Ideal for tight work spaces • Includes standard 120cm bucket • Hydraulic quick coupler • Joystick control with float position • Electric gear on the joystick • Auxiliary hydraulics for front-mounted tools • Hydraulic oil cooler • Brake inching pedal • Open cab and safety bar with removable canopy • Rotating beacon • LED work lights front and rear • Wide tires 26 x 12.00-12 • Adjustable steering column and seat • Hour meter and fuel gauge • Trailer hitch ball head • CE compliant (EU Machinery Directive) and approved by the German Road Traffic Licensing Regulations (STVZO) • 1-year spare parts warranty Price Net: €17,710.00 VAT: €3,364.90 € Gross: €21,074.90 Financing available! Optional 2-year warranty €590 net Iodpfx Ahjv T T N Tsyjbc Pallet fork €650 net TÜV (road approval) €870 net Transport to Germany / Austria upon request Technical specifications Lifting capacity: 700 kg Lift height: 2825 mm (bottom edge of standard pallet fork) Unloading height: 2383 mm (standard bucket tipped out) Lift time / Lowering time: 4.0 / 3.5 seconds Engine: 3-cylinder Perkins Power: 25 HP Emissions class: Euro 5 Drive: Hydrostatic (PWG) All-wheel drive, speed approx. 16 km/h Dimensions: 3805 x 1160 x 2235 mm Weight: 1740 kg Tires: 26 x 12.00-12 Turning radius: 4.3 m Accessories and Spare parts are available from us. Please provide your phone number when you inquire!

Condition: used, maximum load weight: 31,067 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2020, loading space length: 7,400 mm, loading space width: 2,420 mm, loading space height: 1,400 mm, loading space volume: 25 m³, Equipment: ABS, * ABS * 5-chamber tail lights * Alloy wheels * Schmitz axles * Disc brakes * Lift axle ---- Body: Rectangular aluminium rear tipping body, mud-tight, capacity approx. 25 m³, front platform, tailgate, sliding tarpaulin. Isdpfx Asxgy H Ishyjbc Sale only to business customers. FOR EXPORT, ONLY NET PRICE TO BE PAID !!!!! ALL DETAILS PROVIDED WITHOUT GUARANTEE INCLUDING EQUIPMENT & ACCESSORIES. All sales contracts, invoices, proforma invoices, orders, and sales discussions are subject to our Terms and Conditions (see imprint).

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 2,500 kg, lifting height: 3,400 mm, free lift: 100 mm, load center: 600 mm, fuel type: diesel, mast type: telescopic, power: 35 kW (47.59 HP), motor manufacturer: Yanmar Stage III and V, gearing type: hydrostat, fork carriage width: 1,298 mm, fork length: 1,200 mm, fork width: 122 mm, fork thickness: 40 mm, turning radius (inner): 2,700 mm, front tire type: pneumatic tires (air-filled), front tire size: 10x16,5 IND 10, rear tire type: pneumatic tires (air-filled), rear tire size: 10x16,5 IND 10, total height: 2,296 mm, total length: 3,209 mm, total width: 2,406 mm, color: green, Equipment: CE marking, adjustable boom, all wheel drive, cabin, fork extension, front guard, full service history, head guard, lighting, pallet forks, retractable fork, sideshift, TMF25D LET’S GET TO KNOW IT BETTER Truck-mounted forklifts are designed to travel with the delivery vehicle, providing on-the-go material handling without the need for external lifting equipment. Their compact andlightweight design ensures easy transportation, allowing operators to unload goodsanywhere, even in remote or hard-to-reach locations. With all-terrain capabilities, they canoperate on uneven surfaces, construction sites, or tight urban spaces, making deliveriesmore flexible and efficien Ijdpfox Thcgsx Ahyjbc

Condition: new, functionality: fully functional, power: 53.69 kW (73.00 HP), fuel type: diesel, color: red, overall weight: 5,100 kg, lifting height: 5,940 mm, mast type: telescopic, Year of construction: 2025, total length: 3,990 mm, total width: 1,860 mm, total height: 1,970 mm, front tire size: 12-16.5, rear tire size: 12-16.5, ground clearance: 320 mm, load capacity: 2,500 kg, motor manufacturer: Kubota, Equipment: CE marking, all wheel drive, cabin, lighting, This compact telehandler is ideal for construction, agriculture, and industry. With a width of only 1.86 meters and a height of 1.97 meters, you can easily maneuver in tight spaces, warehouses, and construction sites. Its short turning radius and four-wheel steering ensure maximum maneuverability, even on rough terrain. Additionally, front-wheel steering and crab steering modes are also available. Isdpfox Uppksx Ahysbc Equipped with a 74 HP Kubota engine, the H625 delivers reliable performance with a top speed of 24.9 km/h, allowing you to efficiently move between job sites. The hydrostatic drive and ergonomic controls ensure smooth and precise operation. Steering available in three modes: four-wheel steering, front-wheel steering, and crab steering. The cab features tinted safety glass, heating, ventilation, suspended driver's seat, windscreen wipers, interior mirror, and touchscreen controls. Available at a very competitive price compared to similar machines. Contact us for more information or a price quote.

Condition: ready for operation (used), Siemens 1HC5106-0EJ16-1RU7-Z Motor SN: E0T86884001004 with Hübner Long Life Tacho TDP 0.09LT-3 - Z = A11 / G30 / K18 (radial shaft seal, oil-tight (oil-tight flange) - IP65), used, in good condition, 100% functional, delivery as shown in photos. ATTENTION: Please enquire separately for packaging and shipping costs! Ibodpfx Ahsx Dvd Roysc

Condition: used, Manufacturer : DMN Iodpjx R Axwjfx Ahyebc Model : BL 200/1 Type : Rotary valve External diameter : 345 mm Nominal diameter : 205 mm Leroy Somer motor : 0,75 KW Atex class : EX II 20 Tightness : Air purge

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), gearing type: automatic, fuel type: diesel, color: red, overall weight: 2,470 kg, lifting power: 1,200 kg/m, lifting height: 2,489 mm, tire size: 31x 15,5 - 15 AS, tire condition: 100 %, drive condition: 100 %, axle configuration: 2 axles, number of seats: 1, first registration: 04/2025, emission class: euro5, digging bucket width: 1,600 mm, Year of construction: 2025, Equipment: additional headlights, all wheel drive, cabin, head guard, hydraulics, pallet forks, standard shovel, trailer coupling, H&R 2412 – The compact wheel loader for versatile applications with an open cab Advantages of the H&R 2412 loader Powerful engine: The Yunnei DEF20CFF4 4-cylinder engine with 25 hp delivers high performance with low fuel consumption and complies with the Euro 5 emissions standard. Easy operation: The 2-stage torque converter and all-wheel drive enable easy handling, even with heavy loads and difficult ground conditions. Compact design, high maneuverability: Despite its high weight and a lifting capacity of 1200 kg, the H&R wheel loader remains extremely maneuverable with a relatively small turning circle – ideal for tight construction sites and agricultural applications. Hydraulic quick coupler: With the hydraulic quick coupler, you can quickly and easily switch between various attachments, such as the included standard bucket or the manually adjustable pallet fork. Expandable functions: Use the 3rd and 4th hydraulic control circuits to operate additional attachments such as mowers, bale grippers, snow plows, and much more. H&R loaders are technically and visually optimized in-house and thoroughly tested. Additionally, each machine receives extensive rust protection. Our loaders are CE-compliant according to the EU Machinery Directive. Our machine has a TÜV Süd certificate for obtaining an individual operating permit in accordance with Section 21 of the German Road Traffic Licensing Regulations (StVZO) (road approval/operating permit as a self-propelled work machine). Key Features of the H&R 2412 • Includes standard shovel (160 cm) and pallet fork • Powerful and versatile - versatile • Compact design ensures high maneuverability • Joystick with electric gearshift for precise control • Additional 3rd and 4th control circuits for attachments • LED work lights • Trailer hitch for additional trailer use • 220V coolant preheater for reliable cold start capability • Hour meter for monitoring operating times and ensuring optimal compliance with maintenance intervals • CE compliant according to the EU Machinery Directive • Extensively optimized in Germany • Includes 1-year spare parts warranty Price Net: €18,680.00 VAT: €3,549.20 Gross: €22,229.20 Financing available! Optional Road registration / operating permit: €695 Extended warranty (2 years): €590 Isdowd I Epjpfx Ahyebc Transportation in Germany and Austria: Upon request Technical details Engine: 4-cylinder Yunnei Engine power: 25 hp (18.8 kW) Emissions class: Euro 5 Lifting height: 2489 mm (bottom edge of standard pallet fork) Unloading height: 2023 mm (standard bucket tipped out) Lifting capacity: 1200 kg Wheelbase: 2173 mm Dimensions: 3740 x 1600 x 2460 mm Weight: 2400 kg Tires: 31×15.5-15 Accessories and spare parts are available from us. Please provide your telephone number when making inquiries!

Condition: new, functionality: fully functional, operating pressure: 250 bar, fuel: super 95, overall weight: 56 kg, warranty duration: 24 months, Technical specifications: Pump capacity (l/h) 900 Operating pressure (bar) 250 Maximum pressure (bar) 300 Water connection R 3/4" Power type: Gasoline Engine type: G390FA High mobility Color: Anthracite Weight with accessories (kg) 56.8 Dimensions (L x W x H) (mm) 878 x 538 x 702 Included: Spray gun High-pressure hose length: 10 m Power nozzle Water filter Equipment: Protective frame Crankshaft pump with ceramic piston Independence: Independence from external power sources. Complies with EU Stage V emissions standards. Convenient hand start. High mobility: Large inflatable wheels for comfort on difficult terrain. The compact and small unit is very easy to maneuver even in tight spaces. Fits in a car. Ibsdpfjwiwv Ijx Ahyjc Solid and durable device: The sturdy tubular construction protects the pump from damage. A thermal valve protects the pump from overheating during circulation. A crankshaft pump with ceramic pistons. The compact Kärcher HD 9/25 G Classic high-pressure cleaner without water heating is the ideal choice for those new to using gasoline-powered devices. The device is very easy to transport in a car and enables the successful completion of even the most demanding cleaning tasks, for example, on a construction site or in municipal areas. The device offers a working pressure of up to 250 bar and is equipped with a durable crankshaft pump and a pumping capacity of 900 liters per hour. User-friendly operation is ensured by an integrated gasoline engine (EU STAGE V), which allows the device to operate independently of external power sources. Inflatable wheels ensure the necessary mobility on site, an ergonomic handle for easy transport, and practical storage space for accessories. Important parts are easily accessible for maintenance and effectively protected by thermostatic and safety valves. The HD 9/25 G Classic's sturdy steel frame also prevents external and mechanical damage. The device does not have the ability to draw water from alternative sources.

Condition: ready for operation (used), functionality: fully functional, The Lutetia Type 5 Double Jacketed Tumbler stands out as a highly efficient solution for industrial users seeking precise control over their mixing and maturation processes under controlled temperature conditions. Once integrated into the production line, it ensures consistent product homogeneity while providing accurate management of thermal parameters. This makes it ideally suited for meat processing and value-added product workshops. Thanks to its integrated refrigeration unit, the Lutetia Type 5 with refrigeration group offers optimal temperature control throughout the production cycles. As a result, it minimizes quality variations and improves the consistency of finished products. Additionally, it promotes better absorption of marinades and additives, directly optimizing material yield. Its regular operation also stabilizes production rates, helping to streamline the overall workflow of the processing line. Furthermore, this tumbler is easily integrated into demanding industrial environments. It can be used upstream of cooking, packaging, or further processing stages, making it a key component in continuous and structured production systems. When supplied in a configuration reconditioned by Europ’Équipement, it represents a cost-controlled investment without compromising on reliability. Finally, the Lutetia Type 5 Double Jacketed Tumbler offers an excellent balance of technical performance and operating costs, enabling producers to boost productivity while safeguarding final product quality. It is thus designed for operations focused on consistency, profitability, and long-term equipment durability. Technical Specifications – Lutetia Type 5 Tumbler - Maximum capacity: 4,000 kg - Weight: 3,000 kg - Voltage: 400 V - Frequency: 50 Hz - Power: 8.2 kW - Air pressure: 5 bar - Liquid nitrogen pressure: 5 bar Ibodpfx Aheyvrtnsysc - Glycol water pressure: 2 to 3 bar Technical Specifications – Refrigeration Unit - Type: HAE 051 - Year: 2012 - Weight: 260 kg - Voltage: 400 V - Frequency: 50 Hz - Power: 7.7 kW GXHBXS0D

Condition: used, functionality: fully functional, machine/vehicle number: 32139, mileage: 79,900 km, power: 260 kW (353.50 HP), first registration: 11/2022, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,200 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6e, suspension: air, loading space volume: 23.5 m³, Equipment: ABS, AdBlue, air conditioning, airbag, cruise control, differential lock, electronic stability program (ESP), power assisted steering, tachograph, traction control, truck registration, Available from December 2026 The mileage of the offered vehicles may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine OM 936, electronic braking system, disc brakes front and rear, ABS, ASR, ESP, hill start assist, lane keeping assist, turning assistant, Active Brake Assist 4, blind spot camera system, reversing camera, distance control cruise control, cruise control, air suspension, hydraulically steered lift and relief rear axle, differential lock, parking brake, electrical refuse collection system, axle load measuring device, rain sensor, light sensor, lockable fuel tank, main tank 200 L, AdBlue 25, high cab, folding door on the right, driver's seat: comfort suspension seat + 3 static passenger seats, tinted windshield with band filter, electric windows on the left, electrically heated mirrors, lifting roof, immobilizer with transponder, radio + Bluetooth, telephone, digital tachograph VDO, voltage converter 24/12V, additional socket 24 V, circuit breaker, pollen filter, air conditioning, pre-installation for all-round lights, pre-installation for toll collection, pre-installation for FleetBoard, speed limiter, electric sunblind Ibsdpfx Ahezltn Nsyec Volume-optimized, dimensionally stable, smooth-surface collection body with curved contour, torsion-resistant and liquid-tight steel construction, double-lip special seal between collection body and rear section, completely welded, raised front panel 500 mm, reinforced rear section side walls 4 mm, highly wear-resistant loading bed reinforced 8 mm, line break protection against sudden lowering of the rear section, heated rear monitoring system with 7" monitor, CAN-BUS control, running boards with integrated weight sensor, warning signal when reversing, work lights, all-round lights, plastic equipment box, central lubrication system BEKA-MAX, drain fitting (loading bed), bio drain at the front right, bio drain loading bed, spreading system Zöller Delta 2322 Premium

Year of construction: 2025, condition: new, SALES ONLY WITHIN GERMANY AND AUSTRIA!!! Ulma VTC 840 Technical Specifications Model: VTC 840 Condition: Showroom machine (fully functional) Year of manufacture: 2025 Performance: Up to 90 packages/minute (depending on film and product characteristics) Type of packaging: Flow pack Features ✅ Wash Down IP 66 design for hygienic applications ✅ Machine suitable for mono PE film ✅ Motorized film roll holder (max. film width 830mm) ✅ Head space vacuum version (Tight Bag) ✅ Forming tube for bag width 240 & 310mm ✅ Photo cell for printed film Ibedpfx Ahszmv Nljyec ❌ Label dispenser ❌ Printer ✅ Signal for printer / labeler ❌ Double film roll holder ✅ Motorized film roll holder (max. film width 830mm) ✅ Cross-sealing bar with Easy Teflon Change ✅ Squeeze sponge for controlling package volume ✅ Synchronization signals for upstream and downstream equipment ✅ Outfeed conveyor Documentation & Operation Language (documentation & HMI): German (other languages available upon request)

Condition: excellent (used), SOMAB TRANSMAB 200 is a CNC turning lathe with slant bed, engineered for precision, high accuracy and reliability. Swing over bed 260 mm, spindle bore 35 mm; travels Z 300 mm, X 125 mm. Turret DUPLOMATIC with 8 positions, 8 fixed tools, 16 mm tool shank, inner cone Ø20 mm. Stepless spindle 200–5000 rpm, spindle motor 4 kW, spindle taper A2-4", tailstock Morse 3 with 80 mm stroke and 52 mm diameter, pressure 1200 N; voltage 3x400 V 50 Hz; machine weight ~2500 kg; dimensions L1900×W1400×H1980 mm. Equipment: collet device and set (F38), lamp, tool cabinet, RS232 interface, foot pedal, set of toolholders. Delivers tight tolerances; typical applications: automotive, aerospace, medical, machine tools and watchmaking. Ibodpfxozqbmws Ahyoc

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Ibedjza Ukiopfx Ahyjc