Used Saw And Drill for sale (16,657)

Condition: used, Year of construction: 1988, A fully automatic band saw with hydraulic material feed is for sale. Manufacturer: Amada Model: HA 250 Year of manufacture: 1988 Location: Bremen The machine was stored in fully functional condition as a backup unit in case another saw failed. It has not been used since and the warehouse is now being cleared. _____ Our general terms and conditions apply; in addition, the seller assumes no liability for typographical or data transmission errors. The information and images have been provided to us by the owner and authorized for publication. The appearance of the items offered corresponds to their age and the images shown. The technical condition and wear of the items offered are appropriate for their age. Used machines are sold exclusively to commercial buyers and without any warranty. Dodpfx Aoxrtr Ijb Tscr

Condition: new, Year of construction: 2025, functionality: fully functional, cutting height (max.): 175 mm, cutting width (max.): 2,120 mm, cutting length (max.): 6,200 mm, overall weight: 2,500 kg, saw blade diameter: 550 mm, power: 15 kW (20.39 HP), We sell: JRIMAC STANDARD rip saw -NEW- - Cutting length: 6.200mm - Cutting width: 420 - 2.120 mm - Motor power: 11/15 kW - Cutting height: 175 mm - Precise, clean cut - Cutting accuracy +/- 0.5 mm - Hold-down device with extremely strong blade guard and suction connection - SPS machine control - Stepless, frequency-controlled, powerful feed motor - Convenient semi-automatic saw blade height adjustment - Stepless width stop adjustment - JRIMAC" saw blade quick clamping system - Front table support made of plastic or solid wood - Forced-guided riving knife - Lower standard extraction channel installed ready for connection Dedpfx Abjdndvko Tscr - CE-compliant, dust-tested - Processing of more than 12 different materials possible - Reliable spare parts and customer service

Condition: good (used), functionality: fully functional, cutting width (max.): 1,200 mm, cutting height (max.): 70 mm, saw blade diameter: 125 mm, total height: 1,300 mm, total length: 6,000 mm, cutting height with scoring (max.): 2 mm, extraction nozzle diameter: 250 mm, type of input current: three-phase, input voltage: 400 V, space requirement width: 3,000 mm, space requirement length: 6,500 mm, input frequency: 50 Hz, main saw diameter: 350 mm, overall weight: 3,500 kg, rotational speed (max.): 3,800 rpm, cutting length (max.): 4,200 mm, feed length X-axis: 4,500 mm, feed rate X-axis: 7 m/min, collet bore: 75 mm, saw blade speed: 3,800 rpm, saw drive: 7,500 W, year of last overhaul: 2024, Saw for rip cutting but also for sawing. It is very well suited for longitudinal edging of lumber flanks and then cutting to width before planing. With this machine, sawing lumber is incomparably lighter than on classic saws even with a carriage. It can work in automatic and semi-automatic cycle . It has 4 ranges of aggregate position as far as the length of the element is concerned, which means that the aggregate does not have to return all the way to the end of the machine, which shortens the time of cutting the raw material. It significantly facilitates and accelerates the manipulation of Djdsuyvnijpfx Ab Tecr with the preparation of lumber for planing, and the even cut makes the alignment saves time on planing the element. Working on it is relatively safe because during the cutting itself, the operator does not have direct contact with the material being cut, and the workpiece is pressed from above with a pressure beam using compressed air. Activation of the pressure beam and the feed of the cutting unit, is carried out using a foot pedal .It is also suitable for cutting boards with a jigsaw .Also equipped with components for various applications. It is ideal for small and medium-sized carpentry shops that process thick massive lumber. The machine is massive and durable.

Condition: new, Year of construction: 2025, functionality: fully functional, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Striebig Standard 6224 TRK I (Wood Support Wall) Cutting capacity Type 6224 L: 5300 x H: 2240 / H: 2100 x D: 80 mm Saw Frame • Precision machined to 1/100 mm accuracy • Solid, self-supporting, firmly welded, torsion-resistant saw frame • TRK2 automatically adjustable aluminum slatted frame with plastic supports Dcodsu Nf E Aspfx Ab Tsr • TRK1 automatically adjustable wood support wall • 17-position roller support with 3 brake pedals (Type 6224) • 5.15 m long, divided center support at optimal working height (Type 6224), with aluminum grids • Aluminum small parts support (1 pair) for individual use Saw Beam • Stable, durable steel saw beam construction Saw Unit • Effortless operation thanks to fully balanced Saw unit • Robust motor carriage bearings ensure high cutting precision • Powerful, high-torque 5.5 kW (7.5 HP) motor • 300/30 mm carbide circular saw blade • 9 mm saw blade projection (undercut) • Integrated stop for horizontal strip cuts • SUPERSILENT sound insulation to reduce saw blade noise • Mechanical motor brake Design, Ergonomics • STRIEBIG-typical product design • Functional and user-friendly ergonomics Installation • Wall or freestanding installation possible - Pneumatically braked support rollers A05 TRK - Paper holder - Complete aluminum small parts support (2-part) - Vertical digital measuring system

Condition: good (used), Year of construction: 1986, functionality: fully functional, Technical data: Manufacturer : Striebig Type : Standard 6220A year 86 Feed : manual Saw carriage lock : manual Saw unit immersion : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 Kw Cutting area : 5550 × 2200 × 80 mm Speed : 2880 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 6400×2900×1600 Condition : good Mounting : Wall mounting Price : 3990 net A forklift is available for loading Dcodpot D Hhaefx Ab Tjr The machine works well, test run of course possible.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Type Panda 400, M80, Dedsw Iwaiepfx Ab Tecr 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm.

Condition: used, Chain conveyor IDC000113 Dodevlc Ngepfx Ab Tecr - total length: 30 m - width: 1 m - height: 850 mm - electric motor: 11 kW

Condition: used, Year of construction: 1991, cutting length: 4300mm Dcsdpfxjw H Iqds Ab Tsr cutting height: 2100mm cutting depht: 80mm scoring unit: nein feed: manuell read out horicontal cut: Scala read out vertical cut: Scala sawblade diameter: 300mm movable material support: ja Sawblade speed: ca. 4000 U/min motor power: 4 kW machine length: 6500mm machine depth: 1500mm machine height: 2800 mm weight: 800kg

Year of construction: 1993, condition: ready for operation (used), Max. cutting depth: 80mm, cutting area: 5300x2200mm, length: 6665mm, width: 3015mm, height: 1810mm, weight: 840kg, with documentation. Dsdpfxjpcgy Hj Ab Tjcr

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 8,000 mm, total width: 4,000 mm, feed length X-axis: 8,000 mm, feed length Z-axis: 1,300 mm, feed rate X-axis: 70,000 m/min, cutting width (max.): 1,800 mm, table height: 700 mm, cutting height (max.): 1,300 mm, table width: 1,300 mm, table length: 3,000 mm, working height: 700 mm, input voltage: 400 V, saw band speed: 100,000 mm/s, power: 22 kW (29.91 HP), HEMA CoreCutter 900 from our test center - High-performance horizontal band saw - Ultra-precise slicing of blocks into sheets down to a minimum thickness of approx. 1 mm - Vacuum table for precise workpiece clamping - Dynamic servo axes for maximum productivity - 6 years of operation in the test center Dodpewifxdefx Ab Tocr - Ideally suited for cutting lightweight construction blocks made from aramid, Nomex, Kevlar, balsa, PET, PVC, PMI, PU, and many more - General overhaul at the manufacturer's facility available upon request Gantry - Steel construction - 2x linear guide units per column - Servo motor with ball screw drive per side - Bellows cover for guides and spindles - Signal tower (red/yellow/green) on gantry control Control System - Control cabinet with climate control - Siemens PLC - Frequency-controlled drives - WAGO IO-Link modules - Operator panel with 12-inch screen, integrated into the control cabinet Paintwork - HEMA standard, grey RAL 7031/7047, signal red RAL 3001 Technical Data: - Wheel diameter 2x 900 mm - Table length 3,000 mm - Overall machine length max. 8 m - Cutting width approx. 1,800 mm - Cutting height/vertical stroke approx. 1,300 mm - Cutting height (saw blade – extraction hood) approx. 300 mm - Band drive 400 V, 50 Hz, 22 kW - Continuously variable band speed 500 – 6,000 m/min - Table feed rate max. 70 m/min - Compressed air 6 bar

Condition: excellent (used), Year of construction: 1993, Technical data: Manufacturer : Striebig Year : 9.93 Type : Standard ll Plus 5220A Feed : manual Version : automatically deflecting aluminum slatted frame Saw carriage lock : manual Immersion saw unit : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 kW Cutting area : 4600 × 2200× 60 mm Speed : 5250 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 5700×3000×1400 Djdpfx Abjiwlz Ao Tocr Condition : very good Location : Warehouse Saw blade : 1 pc Can be loaded on site with forklift. Delivery and assembly possible by arrangement.

Condition: used, Multi-spindle head, multi-spindle drill head, dowel drill head, fitting drill head -Dimensions: 190/85/75 mm -Bore distance: 26 mm -Middle drill: 5 mm offset -Number: 1x drill heads available Dcjdpfob A I Uljx Ab Ter -Price: per piece -Weight: 2 kg/piece

Condition: used, 6 head band saw IDC000078 - manufacturer: Forestor - 6 head band saw - complete with electric cabinet - complete with electric cabinet Djdpfx Aot D A Sujb Tecr - With infeed table - with band sharpener - used for block cutting

Condition: used, Year of construction: 1999, cutting length: 5300mm cutting height: 2100mm cutting depht: 80mm scoring unit: no feed: manuell read out horicontal cut: Scala read out vertical cut: Scala sawblade diameter: 300mm movable material support: ja Sawblade speed: ca. 4000 U/min motor power: 4 kW Dcedev R U I Sjpfx Ab Tjr machine length: 6500mm machine depth: 1500mm machine height: 2800 mm weight: 800kg

Condition: new, ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen -exhibition machine- Including: - ALTENDORF HAND GUARD sliding table saw Edition TwinFlex with 12" touchscreen Optical protection system: Two cameras collect data for hand detection from a wide area around the saw blade. As soon as hands are detected entering the area a quarter of a second, the saw unit is quickly lowered and quick stop of the saw unit within a quarter of a second. EDITION TWINFLEX - Double roller carriage 3,000 mm - Saw blade projection 150 mm - Motor power VARIO 5 kW (6.8 HP) - Tilting on both sides - DIGIT LD angle mitre fence, cutting to length up to 3,200 mm - CNC rip fence, cutting width 1,000 mm - On/off switch on the double roller carriage - Template holder Included: - Surcharge for motor power 6.5 kW (8.8 hp) ALTENDORF with VARIO, for tilting on both sides Included: - Scoring unit 2-axle, 2-sided, ALTENDORF with motorized height and side adjustment Scoring blade height programmable with quick lowering and quick raising, Drive motor 0.75 kW (1 hp), 8,200 rpm. Including: - RAPIDO 180 mm ALTENDORF scoring system for tilting on both sides Includes: - LED lighting on ALTENDORF scoring unit Included: - Double roller carriage 3,400 mm, ALTENDORF Including: - CNC parallel fence, 1,300 mm, ALTENDORF Included: - Camera arm, swiveling ALTENDORF Includes: - Front support roller ALTENDORF Width 300 mm Includes: - ALTENDORF air cushion table Dedpfx Abou R S Els Tscr Includes: - Table top extension 840 mm ALTENDORF with air cushion - new exhibition machine -

Condition: new, MEP SHARK 282 SXI evo [Semi-automatic] All MEP models on request ! Motor power 1,5/1,8 kW Bank opening 285 mm belt dimensions 2950x27x0,9 mm Weight 485 Kg Speed 36/72 m/min. cutting surface 0° 250 / 220x220 / 280x220 cutting surface 45° right 230 / 200x200 / 220x200 Cutting area 45° left 200 / 170x170 / 200x140 Cutting area 60° right 120 / 80x80 / 140x80 Cutting area 60° left Description Electro-hydraulic semi-automatic band saw SHARK 282 SXI EVO with semi-automatic-dynamic manual function, has MEP-28 control for miter cuts from 45° right to 60° left. Semi-automatic function: At cycle start occurs: - Vise closes and motor starts - Saw head lowers for cut - Motor shuts off - Saw head raises - Vise opens. Semi-automatic dynamic system (manual lowering of the saw band to the desired position and cycle start via the manual button). Some features: New centralized control panel on articulated arm to allow the operator to easily switch from any working position. Control panel with low voltage: Membrane keypad in polyester with thermoformed highlighted Push buttons and actuation control signal. Display to show: * Diagnostics (messages in user language). * Alarms (description of alarm causes) * Status of inputs and outputs * Counting of the cuts * Time used for the performed cut * Current consumption of the saw band motor * Saw band tension * Saw band speed * Numerical display of the head position. Switch handle IP55 of the manual 24 V cycle. Complete program of all special cutting cycles. Identification of other possible special cutting cycles for particular applications. New hydraulic control unit of the latest generation, highly efficient and with low energy consumption. Large work surface with turntable mounted on roller bearings, of 265 mm with preloaded thrust bearing. Double speed of the belt (36/72 m/min.) with control. Provided for the inclusion of an electronic inverter for the continuous regulation of the band speed from 20 to 90 m/min. Stroke of the saw bow programmable directly from the control panel, for adaptation to the material to be cut. Clamping device laterally movable to the left and right, with quick-action vice. Manually operated band tension control with display on the screen by means of electronic converter. Base frame with extendable coolant tray. Electric coolant pump for cooling and lubrication of the saw band. Preparation for the installation of the minimum lubrication kit of the saw band (optional), in addition to the conventional standard lubrication with emulsion oil. Chip clearing brush. The machine is designed for lift truck transport. Length stop for cuts of the same length material support arm with roller, for fixing the loading platform Bimetal saw band for solid and profiled material. Dcedpecgbq Iefx Ab Ter Tools and instructions for use in the user's language. For further technical data, please refer to the attached PDF document.

Condition: good (used), functionality: fully functional, saw blade bore: 30 mm, main saw diameter: 303 mm, overall weight: 800 kg, empty load weight: 800 kg, workpiece height (max.): 2,790 mm, power: 4.4 kW (5.98 HP), working height: 2,200 mm, Technical data: Manufacturer : Striebig Type : Standard 6220A Feed : manual Saw carriage lock : manual Saw unit immersion : manual Swivel adjustment 0 to 90° : manual Motor power : 4,4 Kw Cutting area : 5550 × 2200 × 80 mm Speed : 2880 rpm Saw blade diameter : 300 mm Space requirement : L × H × W 6400×2900×1600 Condition : good Mounting : Wall mounting Dcsdpfet D Hcdsx Ab Tjr Price : 3990 net A forklift is available for loading The machine works well, test run of course possible.

Condition: used, Multi-spindle head, multi-spindle drill head, drilling gear -Multispindle head Dcedpfx Absb T Ti Es Tsr -Number: max. 2x drill/milling cutter -Largest drilling pattern distance: 42 mm -Top mount: Ø 45 mm -Built-in collets: Ø 16 mm -Multi-spindle heads are variable tools -for various processing such as drilling, thread cutting, countersinking, reaming, -with which several holes can be machined at once -Dimensions: 120/110/H220 mm -Weight: 5.6 kg

Year of construction: 2024, condition: new, New single head saw with up-feed blade Ø 300 mm and manual positioning of vertical axis FOM INDUSTRIE PANDA 300 ECHO Dcsdsf Nwxwspfx Ab Tsr - Tungsten carbide saw blade Ø 300 mm - Hydro-pneumatic feed of saw blade - Spray mist blade lubrication system - Cutting area guard kit - Two vertical vices - Two horizontal vices - Set up for the extraction of chips and fumes

Condition: used, Year of construction: 2008, Band saw AKE -1400 Dcsdpfjtp Rh Ijx Ab Ter Speed: 20-80 m/min Saw width: 100-180 mm Electric motor: 2x45 kW Diagonal sawing up to 15 degrees Weight 12.5 tonn

Condition: ready for operation (used), functionality: fully functional, cutting width (max.): 1,100 mm, cutting height (max.): 1,200 mm, Danobat CP 1211T Large Capacity Bandsaw Cutting Capacity Dia / Square 1100mm Dedpfx Astv Nadsb Tocr Cutting capacity rectangle 1200mm wide x 1100mm high Fully automatic

Condition: new, Motor power 230V / 2,35 kW belt opening 230 mm belt dimensions 2085 x 20 x0,9 mm weight 195 kg Speed 30 - 75 m/min. Cutting area 0° 185 / 150 x 150 / 220 x 150 mm Cutting area 45° right 110 / 100 x 100 / 110 x 90 mm Dsdpfx Asd Hzd Dsb Tecr Cutting area 45° left Cutting area 60° right 70 / 70 x 70 / 70x70 mm Cutting surface 60° left Description Metal band saw with infinitely variable electronic speed regulation and automatic lowering. Selector switch for hydraulically controlled or manual band arm lowering. Saw arm can be tilted up to 60° right Quick-action vice Band guide with 8 ball bearings Hydraulic saw band tensioning with tensioning pressure display and band break switch-off Incl. coolant device Incl. machine base cabinet further information can be found on the attached pdf document - please ask for further versions

Condition: new, The ZIMMER Z151/R is a portable metal band saw for professional professional use for steel pipes in assembly. Technical data: Djdpfog Im S Dsx Ab Tecr Motor power 230V / 1,5kW Cutting speed 30 - 80 m/min. saw band dimensions 1.735 x 13 x 0,65 mm weight 37 kg Order number Z151/R Cutting data Round material Square Rectangle 0° 150 140 150 x 140 mm 45° right 100 90 100 x 90 mm 60° right 70 65 65 x 70 mm

Condition: new, Holzkraft HBS 513 S wood band saw Precision saws with great cutting performance for the professional. Heavy-duty design with high dead weight for maximum running smoothness Particularly quiet and precise running thanks to torsion-resistant machine housing Precisely adjustable aluminum parallel fence Cast flywheels with rubber coating and chip scraper brush Large cast iron saw table, swivels from 0° to +45° with ground and polished surface Precise cutting height adjustment via toothed rack with millimeter scale Two suction ports Automatic release of the saw band brake to adjust the saw band. TECHNICAL DATA: Dimensions and weights Length (product) approx. 1150mm width/depth (product) approx. 950mm Height (product) approx. 2000mm Weight (net) approx. 295kg Connection suction suction connection diameter 2 x 120mm Work table(s) working table length 640mm working table width 500mm Work table height 920mm Dsdpfxjg Hzw Ts Ab Tscr Work table extension length 150mm Work table widening width 500mm working table inclination 0 - 45 Supply voltage 400V Mains frequency 50Hz output power 3,5kW Cutting range cutting height max. 90°350mm Cutting height max. 45°200mm Cutting width max. with fence 415mm Cutting width max. without fence 500mm Saw band speed(s) 1320m/min Flywheel diameter 510mm Saw band length 4100mm Saw band width 25mm Saw band width max. 38 Saw band thickness 0,6mm Saw band guide High quality, fixed saw band guide SCOPE OF DELIVERY: Angle stop Saw band Sliding stick Holzkraft dealer - please send us your inquiry

Condition: new, Holzkraft HBS 433 action set wood band saw For the craftsman. TOP in quality, workmanship and price-performance ratio. Particularly smooth and precise running thanks to a torsion-free machine housing and a solid base made of sheet steel. Cast iron saw table with precisely ground and polished surface Convenient laser device for cutting line marking Quick saw blade clamping via eccentric lever on the rear side of the machine Two speeds as standard Precise 3-roller saw band guides, top and bottom as standard Fast cutting height adjustment via rotary knob and toothed rack with millimeter scale Smooth-running aluminum parallel fence with eccentric quick clamping and magnifying glass Standard angle stop, adjustable 60° on both sides Safety switch for automatic shutdown when door is opened TECHNICAL DATA: Dimensions and weights Length (product) approx. 820mm width/depth (product) approx. 730mm Height (product) approx. 1852mm Weight (net) approx. 130kg Connection suction Suction port diameter 2 x 120mm Work table(s) Dedpfxeg Hzwzo Ab Tjcr Working table length610mm Working table width 431mm Working table height 950mm working table inclination -10 - 45 Supply voltage 400V Mains frequency 50Hz output power 1,5kW Cutting range Cutting height max. 90°270mm Cutting width max. with stop 370mm Cutting width max. without fence 410mm Saw band Saw band speed(s) 900 / 450m/min Flywheel diameter 430mm Saw band length 3345mm Saw band guide 3-roller precision guide top and bottom SCOPE OF DELIVERY: Angle stop ±60° Laser device for cutting line marking 1 x saw band wood 3345 x 6 x 0,65 mm; 6 tooth 1 x saw blade wood 3345 x 16 x 0,5 mm; 4 tooth 1 x saw band wood 3345 x 25 x 0,5 mm; 4 tooth