Used Saw And Drill for sale (15,543)

Condition: used, Double drilling mitre saw, with adjustable vertical blades, 2 lower drilling heads, 2 upper drilling heads Pjdpfxjv Tniho Ah Hjgg

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles Podsq Ii Dljpfx Ah Hegg max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: ready for operation (used), Technical characteristics Multi-spindle drilling head Pneumatic feed 70 mm / 200 mm stroke Rising cut-off blade flush with carriage, perpendicular to drilling Adjustable carriage Vertical pneumatic press Pgodpfx Ajk Rtinsh Hjg Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions

Year of construction: 2000, condition: good (used), Weight: 4600 kg Dimensions LBH: 4350 x 1070 x 2690 mm Saw blade dimensions: 8250 x 54 x 1.6 mm Fright basis: EXW with disassembling Price: on demand The 2000 Kaltenbach KBS 1001 DG band saw is a semi-automatic, high-performance band saw for cutting and drilling profiles. The Kaltenbach band saw has a two-metal saw blade M42 measuring 8250 mm x 54 mm x 1.6 mm. The motor of the saw is frequency controlled and has a driving power of 7.5 kW. The cutting speed is continuously adjustable between 16 - 100 m / min. -Working height is 450 mm, working width 1000mm. -drill diameter:10- 40 mm -material dimension max: 1000mmx450mm -material dimension min:65mmx65mm -3 drilling axes, one vertical and one horizontal Pedpfxohkhums Ah Hogg -drill feed rate of 20-200mm/min -5 tool changer position per axis with an iso 40 tool holder The machine can transmit data in different ways: 1. The operator is programmed directly on the control panel. 2. The data is entered into the job preparation via computer and then imported as a CSV file. Data transfer takes place via a floppy disk or network. 3. Data are entered using CAD programs. DSTV data is imported via a floppy disk or network.

Year of construction: 1998, condition: reconditioned (used), coffin saw with drill Eugen Mayer lignum Eugen Mayer 715 column drills used 1998 Podjkmgpvspfx Ah Hogg Mark: eugen Model: Mayer 715 Description: beveller saw with drilling for Eugen Mayer coffins Year: 1998

Year of construction: 2006, condition: excellent (used), saw Miter with drilling BALESTRIERI TECHNA PLUS 3001 Manufacturer BALESTRIERI Model / machine type TECHNA PLUS 3001 Year of production 2006 Machine category Saw Plow Mobile cutting head with positioning drive through motion units and electronic digital display. Slides consist of tempered guides and recirculating ball racks. • 2 units with an O 400 blade - each unit is driven by a Kw. 3 • The capacity (radial system) of the rolling slide unit • 2 support tables of components supplied with vertical pneumatic clamps • 1 indirect table support • For reading through the electronic digital display • 2 boring units delivered from the head in 5 spindles 32 mm - Kw motors. 1.5 (rpm 5500) - slides for rolling the slide unit • Mechanical reader for vertical and horizontal corrections - boring heads are horizontally or vertically orientated • Cycle start by buttons for two hands (in accordance with safety regulations) and pneumatic pedal controls. • Automatic waste of evacuation • Max cutting height: 145mm • Maximum cutting width: 300mm • Min cutting length: 170mm (with automatic loading / unloading fitted 355mm) • Maximum cutting length: 3100mm Cutting width 300.0 mm Cutting height 145.0 mm Engine power 1.5 kW Pedpfx Aed Ifgvoh Hegg ----- Length x width x height - × - × - Weight 2300.0 kg Running hours Hours of connecting to electricity Good technical condition Compliance with CE standards ----- • Weight: 2300kg

Condition: new, Year of construction: 2024, The fully automatic aluminum circular saw UK 350 A 90° CNC + drilling unit (cutting angle 90°) was specially developed for cutting profile and solid materials made of cast aluminium, copper and hard plastics. An automatic feed and an automatic cutting movement are ideal for fast and precise series production! The material feed is up to 700 mm with one stroke. Multiple strokes and thus longer sections can be easily entered from the control panel. The main vice clamps the material over two horizontal and two vertical clamping cylinders, the material feed clamps over one horizontal and one vertical clamping cylinder. The cutting and feed speed can be adjusted to suit the material to be cut via the large and clearly arranged control panel! The machine is equipped with a mechanical lifting height adjustment, the maximum cutting height is 100 mm. A large protective hood covers the entire work area and is lifted pneumatically at the push of a button! The UK 350 A 90° CNC + drilling unit comes standard with an air spray gun for cleaning the machine! Connections for a chip extraction system are available on this machine. This machine is equipped with the vertical drilling unit TR 14 (drilling capacity up to ø 14 mm, thread M12). This has a connection to the cycle control of the aluminum circular saw. Podpfx Aokqz H Djh Hogg

Condition: used, Year of construction: 2013, functionality: fully functional, HD-X 918 – HBP 410/923G complete, state-of-the-art, CNC-controlled system for efficient and rapid fabrication by drilling and sawing of almost all types of structural sections and flat bar. 3 G Podpsw Hf T Nsfx Ah Hsgg

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, drill diameter: 32 mm, product height (max.): 330 mm, product height (min.): 5 mm, product width (max.): 625 mm, product width (min.): 35 mm, rotational speed (max.): 1,600 rpm, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Machine type: CNC drilling system for wide flange beams & welded double-T profiles Working area: 35 x 5 - 625 x 330 mm Drilling data Drilling spindles vertical Y / horizontal Z+W: 1 / 2 pieces Drilling diameter (HSS): 6 - 31.75 mm Drilling length: 130 - 290 mm Drilling stroke: 120 mm Spindle speeds: 200 - 1,600 rpm Rapid forward/reverse: 10,000 mm/min Drilling feed: 20 - 160 mm/min Pgjdpfx Ahevzp Uzj Hog Rapid positioning: 10,000 mm/min Tool change Tool change: manual Tool holders (3 x 1): 3 pieces Drive power 3 drilling drives: 5.5 kW (frequency controlled) Total power: 16.5 kW 6 positioning drives: 0.75 kW Total power: 4.5 kW Working environment Working height above floor: 640 mm Transport system Cross transport on the feed side: 6 liftable conveyor chains, depth: 3.6 m Feed roller conveyor: length 12.1 m for material Discharge roller conveyor: length 6.1 m for material Cross transport on the discharge side: 4 liftable conveyor chains, depth: 4.6 m Automation module: for feed and discharge side MACHINE DETAILS L x W x H (without accessories): 3,050 x 1,300 x 2,200 mm Operating voltage: 400 V / 50 Hz Connection: 3 phases + earth Supply line fuse: 35 A (slow) Power consumption (max.): 16 kVA Power consumption (nominal value): 13 kVA / 25 A Compressed air & air consumption Compressed air connection: 6 - 8 bar (customer-side for air cooling) Air consumption: 250 l/min at 6 bar EQUIPMENT - Profile beam drilling machine KDE 603 DSTV+ module for nested reading - Miter band saw machine KBS 620 DG - Cutting monitoring system - Length measuring device model: M 120 PP - Transport system T12 - Safety barrier

Condition: new, Year of construction: 2023, IN STOCK -- Fully automatic aluminium circular saw with 90° cutting capability and drilling unit TR 12 (up to ø10 mm) or TR 20 (up to ø20 mm), featuring simple and safe operation with excellent cutting performance. This machine is capable of only making 90° cuts, allowing workpieces to be drilled and cut in a single workflow. Technical Specifications: ● Cutting range: 90°: round 100 mm / square 100 x 100 mm / rectangle 170 x 60 mm ● Drive power: 1,9 kW / 400 V / 50 Hz ● Speed: 3000 RPM ● Feed: Single feed 300 mm (double stroke up to 600 mm) ● Max. Cutting Height: 100 mm ● Blade Dimension: 350 x 32 mm Standard Equipment: Pgedpfx Ahsmftiwj Hog ● Machine with 90° cutting capability, powered by a high-performance motor ● Clear and large-sized control panel ● Length adjustment from 5 to 300 mm via handwheel and counter ● Main clamping unit with 3 pneumatic clamping cylinders (1 horizontal, 2 vertical) ● Feed clamping unit with horizontal and vertical pneumatic clamping cylinder ● Large protective cover, covering the entire working area, pneumatically raised ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for dust extraction system ● Minimal lubrication system ● TR 12 or TR 20, fixed automatic drilling unit with one tool holder; spindle speed adjustment, drilling depth, etc. are manually adjusted; drilling cycle occurs automatically --> Also availabe with CNC control or in various sizes!

Condition: used, Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, feed length X-axis: 24,000 mm, feed length Y-axis: 450 mm, feed length Z-axis: 1,000 mm, feed rate X-axis: 400 m/min, feed rate Y-axis: 400 m/min, feed rate Z-axis: 400 m/min, total length: 28,000 mm, drilling capacity: 40 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, type of input current: three-phase, control cabinet width: 1,620 mm, control cabinet length: 450 mm, total height: 3,400 mm, total width: 2,600 mm, control cabinet height: 2,200 mm, overall weight: 11,200 kg, workpiece weight (max.): 8,000 kg, positioning accuracy: 1 mm, spindle speed (min.): 200 rpm, rotational speed (max.): 4,000 rpm, spindle speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, travel distance X-axis: 600 mm, table width: 1,000 mm, drill diameter: 40 mm, compressed air connection: 8 bar, roll diameter: 108 mm, table length: 1,000 mm, table height: 710 mm, power: 21 kW (28.55 HP), Equipment: rotational speed infinitely variable, Complete automatic drill-saw street for profiles APS Europe Profile steel drilling machine RDR-1036 and Band saw RS-1300 Pgsdpjtnf Iyofx Ah Heg Increase your productivity with this complete automatic drill-saw street for profiles. Designed to work efficiently and accurately with different profile steel materials. Price does not include disassembly, assembly, transportation and import duties. Please contact us for more information about this machine.

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station - three head Psdpfjupt Sijx Ah Hjgg - for sawing pallet boards - feed chain - feed pushers from the top

Condition: new, Randek intersection saw SPL728 Computer controlled, revolving, with LAN (Ethernet) connection for downloading or storing sawjobs (text file in ASCII format). The number of programs that could be stored is limited only by the size of the hard disk. Through the graphical touch screen (HMI), the operator is able to track all details directly on the screen or direct the saw directly to minimize disruptions in the production run. Sawblade: Heart metal, low noise, 700 mm Ø / 116 teeth, 360 ° horizontal swivel, 90 ° -28º inclined, 250 mm entry depth Engine performance 7.5 kW. Automatic closed-lock plastic protective screen. Supply bank, selectively 4.0 / 5.8 / 8.2 / 10.6 m long Driving role, IRO4-120, driven. Transport roll 76 mm Ø, roll length 400 mm, roll spacing C / C 500 mm. Return value 120 mm. Pressing device, pneumatic, 2 piece Select direction from left or right. Pedjfg Tatspfx Ah Hogg Delivery bank, optionally 5.8 / 7.0 / 8.2 / 9.4 / 10.6 / 11.8 / 13 m long Computer controlled rolling stock type LX. Execution guide, rollers 76 mm Ø, length 400 mm. Hinged hooks 120 mm. 2 computer-controlled longitudinal locks, driven by gear belts. Hump ​​1 - designed for cutting lengths up to 50 mm. Note 2 - runs over the entire length of the carrier bank. The positioning of the longitudinal abutment and the setting of the cut angle requires independent computer control. Maximum speed of longitudinal contact 1 m / s. Wooden furniture: 1 piece Return devices: 2 pieces Direction: select from left or right

Condition: like new (used), functionality: fully functional, Year of construction: 2014, Our company is offering for sale a Sandvik DD210V One Boom Face Drill Rig for tunnels up to 25 m² UNIVERSAL 360 GRADE, "as new" condition,purchased directly from France and not used. The sale is due to the postponement of a planned project. Price: €330,000 Location: Albania Condition: As new – fully original machine, inspected, tested, and repainted. Main Technical Data: Manufacturer: Sandvik , Model: DD210V One Boom Face Drill Rig for gallery section up to 25m2, Year of manufacture: 2014, Operating hours:935 hours (767 drilling only), Engine: Deutz water-cooled, Power (Power Pack 1): 45 kW (60 hp), Electrical supply: 380V–440V, 60Hz; Boom: B14NV; Feed (Left): NTV 6/10 Split feed; Drifter (Left): HL510Bar; Ansul Fire Suppression System. Pedpjxpvyvjfx Ah Hegg

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Pedpfx Aex Anaujh Hjgg Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: excellent (used), Year of construction: 2012, Eismo - Ergonomic model 290.250 DGA - 2-axis automatic band saw 2 working axes Siemens Simatic numerical control Podpfxoupht Io Ah Hsgg roller infeed conveyor (6 m x 0.65 m) with 2 new saw blades Excellent condition Location - Poland

Condition: used, Chain conveyor IDC000113 - total length: 30 m Pgedpsvlc Ngjfx Ah Heg - width: 1 m - height: 850 mm - electric motor: 11 kW

Condition: used, 6 head band saw IDC000078 - manufacturer: Forestor - 6 head band saw Pedpst D A Suofx Ah Hjgg - complete with electric cabinet - complete with electric cabinet - With infeed table - with band sharpener - used for block cutting

Condition: used, Year of construction: 2008, Band saw AKE -1400 Speed: 20-80 m/min Pgsdpfotp Rh Isx Ah Hsg Saw width: 100-180 mm Electric motor: 2x45 kW Diagonal sawing up to 15 degrees Weight 12.5 tonn

Year of construction: 2010, condition: good (used), Double mitre saw DGS400 for 45° (frame) cuts with digital left stop. Drilling or dovetail milling machine T20NC for frame assembly. 4 motors at 1.1 kW. Speed: 26,500 rpm. Direction of rotation: right and left. Milling cutter / drill bit. Pgodpfexxytxox Ah Hjg

Condition: ready for operation (used), Technical characteristics Electric head spacing with programmer Adjustable heads Pgsdpjub Etnjfx Ah Hog 5 drilling units Pneumatic clamping 4 hp saw motors, 400 mm blades 3-hp drilling motors + scoring unit Steerable drilling unit Power and Motors Overall dimensions

Condition: excellent (used), 1 x AEW 350 Bandsaw - full working order. 415 Volts - 3 Phase. Heavy Duty - professional Machine. Pgodpfxex Swy Es Ah Heg

Condition: refurbished (used), functionality: fully functional, The Mado Industrial Bandsaw Model: Selekta2 is a robust and reliable cutting machine designed for high-precision, heavy-duty processing of large pieces of meat (with or without bone), poultry, and fish. Performance & Precision Pgedpfx Aexxn Iksh Hog Large Cutting Capacity: Offers a Max. Cutting Height of 340 mm, allowing it to handle large blocks of frozen or fresh product. Generous Working Area: Features a large Working Table surface of 680 x 680 mm, providing ample space for maneuvering large cuts. High-Speed Cutting: Utilizes a precise bandsaw blade for fast, clean, and accurate cuts. Operational Benefits Industrial Construction: Built on a sturdy, stainless steel frame, ensuring stability, durability, and resistance to corrosion in demanding environments. Maneuverable Design: The machine is fitted with wheels, making it easy to move for positioning or for cleaning the work area. Hygienic and Accessible: The stainless steel material and open design (as pictured) are built for easy washdown and adherence to hygiene standards. Compact Dimensions: Has Dimensions of 850 x 800 x 1700 mm (L x W x H), offering a powerful tool in a manageable footprint.

Condition: excellent (used), Kolbe stainless steel bandsaw Heavy duty roller table used for carcass's Model K430 H Table size 1,050 mm front to back Width 830 mm Maximum cut height 480 mm Pedsxpfluspfx Ah Hegg Safety interlocked doors Braked motor 4 Kw

Condition: new, Year of construction: 2025, The ZM101 is a pioneering product in our lineup, designed to sharpen sawblades with widths of up to 100 mm at a remarkable rate of 65 teeth per minute. This efficiency enables it to simultaneously service 3-4 bandsaw/sawmill machines. Equipped with an abrasive ceramic disk, the ZM101 can expertly sharpen all teeth with profiles. Its robust construction allows it to perform reliably under the most demanding conditions, making it a favorite among our customers. Additionally, its straightforward design ensures ease of use and low maintenance costs, further enhancing its appeal. Technical characteristics: Maximum length of the blade: 6000 (8000) mm Minimum width of the blade: 20 mm Maximum width of the blade: 100 mm Maximum height of the tooth: 12 mm Front angle of the tooth: 0÷25° Tooth pitch: Profile N: 10, 12.5, 15, 20, 25 mm Profile WM: 22, 25 mm Working capacity: 65 teeth/min Size of the abrasive disc: Cut-in sharpening, profile N: ø200 x 10 x ø32, ø200 x 13 x ø32 mm Profile sharpening, profile WM: ø200 x 8 x ø32, ø200 x 10 x ø32 mm Voltage: 380 V Power of the electric motors: 0.09 and 0.37 kW Size: Without band saw holder (L x W x H): 750 x 550 x 1100 mm Pgodpfsxliguex Ah Hjg With band saw holder (L x W x H): 2000 (3000) x 1000 x 1100 mm