Sandblasting unit

Iepco Micropeen Peenmatic 1000 SK

Condition: ready for operation (used), Year of construction: 1996, pressure 80.0 t chamfer lenght 2550 mm distance between columns 2130 mm column arm 420 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 80.0 mm/sec stroke 200 mm dayligth 470 mm table width 60.0 mm table height 910 mm Number of working hours ca. 37.102 h total power requirement 9.0 KW weight of the machine ca. 5750 kg range L-W-H 3100 x 2180 x 2540 mm good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=fwdjSiQYq_A Equipment: - CNC electro-hydraulic press brake - OPERATEUR CNC control for 8 axes X1 + X2, Y1 + Y2, R1 + R2, Z1 + Z2 - CNC-controlled backgauge adjustment (X-axes) - CNC-controlled vertical adjustment of the stop fingers (R-axes) - CNC-controlled left-right adjustment of the stop fingers (Z-axes) - Freely movable two-hand control & foot switch - Tool crowning - AMADA type - Various tools - CE marking - Side guards (hinged doors) - Rear guards (hinged door) Ljdsxabnyspfx Ancsaa - 2x emergency stop buttons at the front - Operating instructions

Condition: good (used), Year of construction: 1979, Model making milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making milling machine Laodsnzpx Ropfx Ancea -Manufacturer: Zimmermann, universal milling machine type FZ 1 with extensive accessories -rotating cross table: 490 x 400 mm -Travel: X/Y/Z 320/385/430 mm -Spindle holder: SK30 -Drive: 1.1 kW -Speed: 560 to 14000 rpm, 8-stage -Accessories: incl. see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Condition: used, Dimensions (HxWxD) 1700x1020x800 mm Lasdpswqg Suefx Ancsa

Condition: new, volume flow: 0.984 m³/h, Atlas Copco G7FF 500 lt screw compressor NEW Specification: • condition - new • manufacturer - Atlas Copco • capacity - 984 l/min • main engine power - 7.5 kW • tank - 500 l • maximum operating pressure - 10.0 atm • built-in refrigerant dryer • electronic setting of compressor operating parameters • soundproof cabin (only 67 dB) Laodpfohkttpsx Ancja • meets CE standards • user manual in Polish • weight - 227 kg Additional information: • possibility of obtaining a manufacturer's warranty after start-up by an authorized Atlas Copco service • available within 7 working days

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm Ljdpfxetqqr Ro Ancjaa table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Acc.: programmable back gauge, upper and lower dies, table extensions

Year of construction: 2023, operating hours: 11 h, condition: as good as new (ex-display), machine/vehicle number: MA0144_1922, Exhibit: Compressor Kaeser SX 8 (10 bar) with SIGMA CONTROL 2 Year of construction: 2023 Operating hours: 1 Bh Techn.Daten: Lajdeh Ey Rcopfx Ancsa Volume flow at 10 bar: 0.67 m³ / min Motor power: 5.5 kW Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 632 x 970 mm Weight: 155 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: new, functionality: fully functional, Year of construction: 2024, laser hours: 1,500 h, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness aluminum (max.): 25 mm, sheet thickness brass (max.): 14 mm, sheet thickness copper (max.): 14 mm, input voltage: 400 V, compressed air connection: 7 bar, warranty duration: 60 months, Equipment: cooling unit, safety light barrier, Fiber laser cutting machine for all kinds of sheets. Equipped with automatic nozzle changing and one-click processing functions, the P series is competent for all cutting demands. The special fiber laser nozzle and cutting process ensure faster oxygen cutting of carbon steel, more gas-saving low-pressure nitrogen cutting of stainless steel, and better quality air cutting of carbon steel. The fiber laser heads are able to detect protruding obstacles to effectively reduce the damage rate and save the maintenance cost of the laser cutter. With one-click processing, one laser machine is capable of processing multiple sheets in batches with a single setting, achieving batch processing. Condition: New Laser type: Fiber laser Laser power: 6000W Cutting area: 3048*1524mm - 6100*2500mm Cutting speed: 200m/min Ljdpfx Ajtrvpxsncoaa Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Supported graphic format: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cooling mode: WATER COOLING Suction filter: ECO6 CTS 9 Kw Available for immediate delivery

Condition: excellent (used), Year of construction: 2008, Beam on: 21,660 h Laser on: 42,130 h Ledpfxoxfim Ie Ancsaa

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, Lsdpfx Aow Rrcwjnceaa plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Year of construction: 2000, condition: ready for operation (used), Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available. Lodpfx Anstk Rwtjcsaa