Used Sandblasting Glass for sale (3,660)

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage pr.. Ncsdpjy Szcwsfx Amyjw

Condition: used, Year of construction: 1996, machine/vehicle number: LC635, Used STORK glass filling line for spirits 12000 BPH - shaped, taperedTechnical Specifications & Performance DataThis complete used bottling line for glass bottles is engineered around a Stork rinser–filler–capper monoblock with vacuum filling, complemented by wet-glue front, back, and neck labeling. It is a second hand industrial packaging solution designed for efficient beverage production on round, shaped, and tapered glass containers.Line type: Complete glass bottling lineProduction speed: 200 BPM (approximately 12,000 bottles per hour)Bottle shapes: Round, shaped, taperedFormats: Compatible with 0.35L, 0.7L, 0.75L, 1.14L bottle formatsContainers: Designed for Glass bottle handlingFilling principle: Vacuum fillingLabeling: Wet glue labeller for front, back, and neck labelsElectrical supply: 415 V / 50 Hz on most equipment; select components 240 V / 50 HzKey equipment and model references:Depalletizer: Osmeka VAE (1996)Rinser-Filler-Capper Monoblock: Stork RVR30/146-36-9 LW (1996)Labeller: Cavagnino & Gatti CG84CL3/18 (wet glue)Laner: Stork SIE1500PB3 (1996)Case packer: Stork (1996)Case sealer: 3M 800 Afe (1998)Carton erector: Bortolinkemo with Nordson hot glue applicator (2013)Checkweigher: Logics & Control Logiweight LS (2016)Spiral carton elevators: AmbaFlex SpiralVeyor SV (2022 and 2013)Advanced Automation & Control SystemsThe line integrates automated bottle handling, synchronized conveying, and coordinated controls across depalletizing, rinsing, filling, capping, labeling, and end-of-line packaging. The monoblock provides precise vacuum filling for consistent fill levels on glass containers. The wet-glue labeling station applies front, back, and neck labels at line speed. Ancillary equipment such as the Nordson hot melt system on the case/carton erector and the Logiweight checkweigher support reliable, data-driven quality and packaging integrity. Electrical configurations are standardized at 415 V / 50 Hz for heavy equipment and 240 V / 50 Hz for the checkweigher.Production Line Integration CapabilitiesDesigned for seamless inline operation, this used bottling line includes a laner for flow management and spiral carton elevators for vertical transport, optimizing footprint and maintaining throughput. Format changeovers cover 0.35L to 1.14L glass bottles, handling round, shaped, and tapered geometries. The system integrates upstream depalletizing through to case erecting, packing, sealing, and weight inspection, providing end-to-end industrial packaging capability for beverage production.Machine Condition & Maintenance HistoryThis second hand bottling equipment set comprises components manufactured between 1996 and 2022, reflecting a maintained and progressively updated line. It is presented as a complete used bottling line suitable for recommissioning into beverage production. Component ages vary, with the core Stork monoblock originating in 1996 and end-of-line elements ... Ncedpfey Szb Hjx Amyew

Condition: used, Year of construction: 2020, Overview This container sweep-off depalletiser (new glass) was manufactured in 2020 by Germany Krones AG. The machine is designed for high-speed depalletising of new glass containers in beverage production lines. It operates with a sweep-off system using a four-sided centring carriage to transfer complete container layers onto a discharge table. Technical data Nedpfey Tn D Djx Amyocw - Capacity: approx. 48,000 cont/h (up to 57,600 cont/h machine output) - Application: Depalletising of new glass containers - Configuration: Z-arrangement with pallet infeed and upper-level container discharge - Pallet handling: Pallet lifting unit with automatic empty pallet discharge - Discharge table: approx. 5,000 mm length - Conveyor: Steel chain conveyor - Drives: Servo drives (SEW) - Sweep-off system: Four-sided centring carriage, servo-driven - Layer handling: Integrated handling module with suction gripper system for layer pads and top frames - Vacuum system: Ejector-based - System Configuration: - Pallet lifting unit - Container discharge table (approx. 5,000 mm) - Steel chain conveyor system - Handling module with suction gripper - Packing material magazine - Empty pallet discharge system - Safety fencing (approx. 25 m) - Light barriers and safety circuits

Condition: used, Year of construction: 1999, Overview  This complete hot-fill and cold-fill bottling line was manufactured in 1999 – 2017 by Germany KHS and Krones. The line is designed for beverage production in glass and PET bottles, supporting both hot-fill and cold-fill applications. It was in operation until the end of 2025, is still installed, and is available immediately. The line can be inspected on request. Technical data  - Capacity: 12,000 – 36,000 bottles/hour (example: approx. 33,000 bph @ 500 ml) - Formats: 250 ml – 1000 ml - Application: Hot-fill and cold-fill beverage production - Container types: Glass bottles and PET bottles (hot-fill) - Filling temperature: 10°C – 104°C - CO₂ capability: Yes - Closures: - Glass: 28 mm aluminium, 33 mm / 43 mm aluminium twist-off - PET: 38 mm 3-start hot-fill closure - Labelling: Cold glue paper labels (optional sleeve labelling available) - Packaging: Wrap-around cartons and tray packaging (no shrink wrapper included) Scope of Delivery  Ncsdoyx I Awopfx Amysw - Depalletizer | Meypack | DL 71 | - | Low-level depalletizer with pallet conveyor and magazine - Bottle rinser | Niko | Linear Rinser | 1999 | Siemens S7 PLC, heat recovery system - Filler | KHS | Innofill DNR 80 | 1999 | 80 valves, 15-head aluminium screw capper, HMI renewed 2015 - Twist-off capper | Italmeccanica / Crown | S4BLH | - | Steam-heated, automatic cap feeding - Cooling tunnel | Tuchenhagen / Göbel | K1-135 | - | 7 cooling zones - Bottle dryer | Europool | - | 2007 | High-speed air dryer - Labelling machine | Krones | Starmatic | - | Cold glue labelling, Siemens S5 - Wrap-around packer | Kisters | 320/50 | 1999 | Tray and carton packaging, Nordson hot melt - Conveyors | KHS / Krones | - | - | Complete conveying system - Palletizer | KHS | LORD 1BSN2 | 1999 | Pre-grouping, pallet formats Düsseldorf/Euro/Industrial - Pallet labeller | Logopack | - | - | Pallet labelling system - Reverse osmosis system | MWT | - | - | Capacity 800 l/h

Condition: used, Year of construction: 2016, Overview  This compact filling line for cans and bottles consists of equipment from Wildgoose, Slowbeer, Enos Euro and Millipore and is designed for craft beverage production with flexible batch sizes. The line combines isobaric and atmospheric filling technologies and includes semi-automatic and manual machines for filling, capping, labeling, and product filtration. The core component is a Wildgoose WG1-CE filler (2021), capable of handling both cans and bottles with integrated seaming functionality. With its modular setup, the line is particularly suitable for small to medium-scale producers, pilot production, or specialty beverages such as craft beer, kombucha, cider, or soft drinks. Technical Data  - Capacity: - Up to 24 units per minute (atmospheric – Wildgoose) - Up to 16 units per minute (isobaric – Wildgoose) - Additional manual / semi-automatic filling capacity depending on configuration - Formats: - 20 cl – 1.5 L (depending on machine) - Container types: - Cans and glass bottles - Application: - Beer Ncodpfx Aeyxr Anomyow - Craft beverages - Kombucha - Cider - Soft drinks - Filling technologies: - Isobaric filling (carbonated products) - Atmospheric filling - Manual filling - Filtration: - 3-stage microfiltration system (Millipore) - Configuration: - Modular / semi-automatic line - Condition: used, good condition Scope of Delivery - Can / Bottle Filler | Wildgoose | WG1-CE | Isobaric and atmospheric filling with integrated seaming; 16 cpm (isobaric) / 24 cpm (atmospheric); formats 33 cl / 50 cl | 2021 - Manual Bottling Machine | SCH | SCHPK6 | 6-spout manual filler; approx. 250 bottles/hour; formats 20 cl – 1.5 L | 2016 - Bottling Machine | Slowbeer | RI4 | 4-spout filler; approx. 350 bottles/hour; formats 22 cl – 1.5 L | 2012 - Labeling Machine | Enos Euro | Base | Semi-automatic labeler; approx. 28–30 units/min; formats 22 cl – 1.5 L | 2017 - Crown Capper (2x) | Slowbeer | Tap Air Corona | Pneumatic crown cappers; crown sizes 26 / 29 mm | 2012 - Microfiltration System | Millipore | 3-stage | Stainless steel construction; 3-stage filtration system | 2016 Additional Information - Seaming unit is integrated in the Wildgoose WG1-CE filler - The line allows flexible switching between can and bottle filling - Ideal for craft production with frequent product or format changes - Compact footprint and modular design  

Condition: used, Year of construction: 1998, Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as per your note. Technical Data Capacity: 33,000 bottles per hour Line type: Returnable glass bottling line Main machine years: mainly 1998 and newer Bottle type: Returnable glass bottles Closure types: Crown cork and screw cap Packaging type: Beverage crates / returnable plastic crates Filling system: Isobaric filling block by KRONES Njdpfx Amsytvyfeyecw Special Notes: RINK KM 790/4K-3K QL: only for bottles with screw closure For crown cork bottles, a corresponding format set is required Labeling machine: will be completed according to customer requirements Scope of Delivery Depalletizer | Profipack | – | 2006 Decrater | KRONES | Linapac A-T 1600 | 1998 Crate Washer | Hormes | Crate Washer | 1992 Crate Decapper | RINK | KM 790/4K-3K QL | 2020 Bottle Washer | KRONES | Lavatec-KES | 1998 Empty Bottle Inspector | HEUFT | Spectrum TX | 2015 Filler Block | KRONES | Sensometic VPVI 77-103 / KK11 / SV11 | 1998 Labeling Machine | To be completed according to customer requirements Crater | KRONES | Linapac F-T 1800 | 1998 Palletizing system | Profipack | 2006 Pallet Wrapper | Robopack | 2006 Pallet Security | Vertical Strapping | 2006 Additional Information: Bottle Formats: - 0.25 L Individual bottle – Ø 57.5 × 215 mm - 0.33 L Ale bottle – Ø 61 × 236.5 / 238 mm - 0.33 L Ale bottle – Ø 68.5 × 234.5 mm - 0.5 L Ale bottle – Ø 68.5 × 270 mm - 0.5 L Steinie bottle – Ø 70.5 × 174 mm - 0.5 L Bavaria bottle – Ø 70 × 260 mm - 0.5 L NRW bottle – Ø 67 × 260 mm - 0.5 L Individual bottle – Ø 82 × 295 mm - 0.7 L GDB bottle – Ø 79 × 290 mm - 0.75 L GDB bottle – Ø 79 × 290 mm - 1.0 L GDB bottle (light) – Ø 84 × 305 mm - 1.0 L AMG bottle – Ø 83.7 × 298 mm Crate Formats: - 5 × 4 – 400 × 300 × 300 mm - 6 × 4 – 400 × 300 × 270 mm - 5 × 4 – 400 × 300 × 210 mm - 4 × 3 – 355 × 275 × 345 mm - 4 × 3 – 400 × 300 × 330 mm - 5 × 4 – 355 × 275 × 255 mm - 5 × 4 – 400 × 300 × 290 mm

Condition: used, Year of construction: 2015, Overview Ncedpfeyigigjx Amysw This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  - Capacity: up to 135 bottles per minute (BPM) - Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz - Filling product: beer, carbonated beverages, kombucha, functional drinks - Filling system: isobaric probe filling with electronic level control - Fill range: 12 oz – 24 oz containers - Labeling system: cold glue labeling - Bottle detection: integrated bottle burst detection system - Construction: all stainless steel, high-hygiene design - Cleaning: automatic CIP capability - Operation: touchscreen HMI with recipe and product management - Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) - Note: frequency / voltage converter required for non-US markets - Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  - Depalletizer | KOSME / Semidepal | 2015 - Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 - Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 - Bottle Conveyors | KOSME | – | Included | 2015 Additional Information - Manuals included - Basic tooling and format change parts for 12 oz and 22 oz included - Additional documentation available upon request - All conveyance lines included - Dismantling team available to supervise reinstallation and recommissioning - Utility specifications (air, CO₂ / gas) available upon request

Condition: used, Year of construction: 2006, Overview  This glass bottle depalletizer was manufactured in 2006 by Italian company MAS PACK. The machine is currently in production until end of July 2026 and forms part of a wine bottling line. Visits are possible on request. The machine is well maintained. Technical data  - Capacity: - Up to 7,200 bph - Application: - Glass bottles - Formats: - 37.5 cl Bourgogne - 75 cl Bourgogne - 1.5 L Magnum - Power supply: - 5 kW Ncjdpfx Aoyiak Romyjw - Air supply: - 150 L/min

Condition: used, Year of construction: 2003, Overview This complete filling line for non-returnable glass bottles was manufactured 2003 by several well-known European producers, mainly Sidel. The line is designed for high-capacity beverage production, handling up to 40,000 b/h and is in a good condition and designed for 3-shift 24/7 operation.  Technical Data - Capacity: 40,000 bph (at 0,25L) - Bottle Formats: 0.25L, 0.33L, 0,5L - Packaging formats: • 4x6 x 25cl • 1x12 x 25cl • 24x25cl • 24x30cl • 4x6 x 33cl • 6x4 x 33cl • 1x12 x 33cl •24x33cl • 20x50cl  - Application: beer, CSD, or other beverages in non-returnable glass bottles - Hygienic design - Automated change-over  Scope of Delivery Pallet Transport (Depalletiser) | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B Bulk Depalletiser | Sidel / SIG Simonazzi / GEBO | 2003 | SWEEP-OFF/B  Pallet Transport (Palletiser) | Sidel / SIG Simonazzi | 2003 | LINEAR Tray and/or Carton Palletiser | Sidel / SIG Simonazzi | 2003 | LINEAR Pallet Shrinkwrapper | Sidel / SIG Simonazzi / MSK | 2003 | ECONOTECH/TOWERTECH Pallet Labeller | Sidel / SIG Simonazzi / Logopak | 2003 | LOGOMATIC 920 II PF Basket Erector | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLA Fourpack Transport and Divider | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLW Basket Inserter | Sidel / SIG Simonazzi / H&B Schleuter | 2003 | TLE Carton Packer | Sidel / SIG Simonazzi / FANUC | 2003 | ROBOKOMBI Carton Closer | Sidel / SIG Simonazzi / Bortolin | 2003 | MARA H.M Carton Marker 1 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Carton Marker 2 | Sidel / SIG Simonazzi / Domino | 2003 | A-Serie Inkjet Printer Weight Checker | Prisma | 2003 | 10D3 Full Carton Inspection | BBull / Centro Kontrollsysteme | 2015 | Image VKK 500 Bottle Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Carton Conveyors | Sidel / SIG Simonazzi | 2003 | TRANSPORT Crown Cork Feeder | Sidel / SIG Simonazzi | 2003 | SM80 Rinser | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Filler | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP Crowner | Sidel / SIG Simonazzi | 2003 | EUROTRONICA LP C.I.P. | Sidel / SIG Simonazzi | 2003 | AUTOSAN Fill Height Control | Sidel / SIG Simonazzi / Heuft | 2003 | SPECTRUM TX Tunnel/Bottle Pasteuriser | Sidel / SIG Simonazzi | 2003 | PAMA CLD 50/144 Bottle Coding on Necklabel | Mundi-Technology | 2015 | Mundiscan UP2000 HE Labeller | Sidel / SIG Simonazzi / Krones | 2003 | Topmodule Type 407 Bottle Inspection & Sorting | Sidel / SIG Simonazzi / Krones | 2003 | Checkmat type 707 Tap tone | Sidel / SIG Simonazzi / Krones | 2003 | TapTone 500 Series Nsdpfxsyb Tucs Amyocw

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  - Year of Manufacture: 2010–2014 - Application: Water and other beverages - Capacity: - Approx. 2,000 bph (330 ml) - Approx. 1,670 bph (500 ml) Ncedpfx Ajyb Tkdemysw - Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) - Closure Type: 26 mm crown caps - Configuration (Monobloc): - 16 rinsing heads - 16 filling heads - 1 crowning head Scope of Delivery  - Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph - Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph - Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts - DE filter | Spadoni | - | 2011 | 80 hl/h - Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules  

Condition: used, Year of construction: 2022, Overview  This complete isobarometric filling line for sparkling wine was manufactured in 2022 by Italian manufacturers DUETTI, GAI, ROBINO & GALANDRINO, WIN&TECH and MAKRO. It is designed for premium sparkling wine in glass bottles and includes depalletizing, rinsing, isobaric filling, capping, wirehooding, capsuling, labelling, CIP and filtration. The line is still in production, has approx. 2,100 operating hours and can be visited on request. It will be available end of March 2026. Technical data - Application: Sparkling wine (glass bottles) - Capacity: Nodpfeyb Tf Isx Amyecw - Up to 4,500 bph - Formats & Speeds: - 0.187 L: 4,500 bph (4°C & 15°C) - 0.375 L: 4,500 bph (4°C & 15°C) - 0.750 L: 4,000 bph (4°C) / 2,900 bph (15°C) - 1.500 L: 2,000 bph (4°C) / 1,500 bph (15°C) - Operating hours: 2,100 Scope of Delivery  - Depalletizer | DUETTI | M Automatic | 2022 | — - Rinser–Filler–Capper Monoblock | GAI | 4033 (16 rinser valves / 24 filler valves / 3×3 capping heads) | 2022 | Isobaric - Automatic CIP System | WIN&TECH | — | 2022 | — - Microfiltration Pallets (x2) | WIN&TECH | — | 2022 | — - Wirehooder | ROBINO & GALANDRINO | REKORD 6 | 2022 | — - Level & Cap Inspector | CMP | — | 2022 | — - Capsule Distributor & Monoblock | ROBINO & GALANDRINO | ZENITH F 3/18 | 2022 | — - Adhesive Labeller | MAKRO | 4 Stations | 2022 | — - Bottle Conveyors | — | — | 2022 | Included

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications - Output: 7,800 bph - Producs: Beer and CSD - Formats: - NRW 0.5 l - 0.33 l ring neck - 0.25 l LN Machine List  - Machine type: Decrater - Manufacturer: BMS - Year of manufacture: 2012 - Machine type: Decapper (Screw Cap) - Manufacturer: Rink - Decapping in the crate Euro 0,5l in 4x5 crate - Year of manufacture: 2012 - Machine type: Bottle washer - Manufacturer: Gera - Year of manufacture: 2024 - Machine type: Empty bottle inspector - Manufacturer: Krones - Model: Smarttronic - Incl. Pusher - Year of manufacture: 2012 - Machine type: Filler - Manufacturer: Kosme - Model: Isofill G 28/960 - 28 Valves - Year of manufacture: 2012 - With Combi Capper 4 heads(Crown Cork and Screw Cap) - Capacity: - 7,800 bph - Machine type: Labeling machine - Manufacturer: Krones - Model: Robusta - Refurbished in 2012 - 10 Bottle plates - 2 Label stations with 4 grippers and 4 glue pallets Ncodpfx Amsyb Sbueysw - Inkjet printer - Machine type: Crater - Manufacturer: BMS - Year of manufacture: 2012 - Crate format: Modul Crate 4x5

Condition: used, Year of construction: 2004, Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data - Capacity: up to 20,000 bph - Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB - Application: Water, CSD, or other beverages in returnable glass bottles - Condition: Line in good condition - Availability: Immediate - Status: Still installed and connected   Nsdpfx Amoyb R Uaoyecw Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2,000 crates/hour | 1997 | GDB crates, stainless steel Bottle washer | Klinger | 1993 | Stainless steel, multi-zone, steam extraction, dosing system Empty bottle inspector | Krones | up to 50,000 bottles/hour | 2004 | Linatronic system Filler | Nate-Veral 60 | 20,000 bottles/hour | 2004 | glass bottles, without closer Capper | Datz | 20,000 bottles/hour | 2004 | 8-head Solo SV, left–right working direction Swing-top capper | Datz | 20,000 bottles/hour | 2004 | 24-head BVM-24R, swing-top closure Labeller | Krones | up to 20,000 bottles/hour | 2004 | Prontomatic, 2 stations, Checkmat inspection Crater | Otto Fleischer | 1993 | ROTA 1 E, automatic case packer

Condition: used, Year of construction: 2019, Overview    This filling line for returnable glass was installed in 2019 and essentially consists of a bottle washer, rinser/filler and capper block and a labeling system with laser printer. The bottling line is vacant as the previous owner is closing the brewery due to retirement. The bottling process ran smoothly until the end.  The equipment is still installed and connected and can be viewed in person at any time.   Technical details  - Capacity: max. 1,500 bph (1,000 bph were actually run)  - Bottled product: Beer   - Included formats: 0.33l longneck, 0.5l NRW  - Closure: Crown cap  Scope of delivery  - Bottle washer | SEN | 1989 (overhauled and installed in 2020)  - Isobaric filler block | Shandong Yuesheng | 2019   - Rinsing positions: 14   - Filling positions: 12   - Capping positions: 5   - With pre-evacuation   - Counter-pressure filler incl. 2 formats 0.33 longneck 0.5 NRW  - Dry tunnel | Shandong Yuesheng | 2019  Nsdpjxgfr Nefx Amyocw - Labeler incl. laser printer   - Collecting table  

Condition: used, Year of construction: 2005, Overview  The glass depalletizer was manufactured by the German company KHS in 2005 and was until recently part of a bottling line in a German dairy company. The palletizer is now being released as the owner is shutting down the production. Technical details/ scope  - Depalletizer with lift and discharge at the bottom - With intermedeiate layer remover and magzine Ncsdpfsxb Ai Uex Amysw - With slide for top layer/cover - Enclosed conveyors can pull off single lane wise for shaped bottles - Incl. protective fences, pallet transport, discharge table

Condition: used, Year of construction: 2011, Overview  This complete filling line was designed for NRW and Euro bottles as well as crates and pallets and offers an output of up to 7,500 bottles per hour. The machines are from different years of construction between 1992 and 2022 and have few operating hours. The line is still in operation until the end of May and can be viewed in person. Nsdov Icubopfx Amyocw Technical details - Output: Up to 7,500 bottles/hour - Bottle formats processed: 0.33L & 0.5L (NRW, Euro, Ale) - Crate formats processed: NRW and Euro crates Scope of delivery - Palletizer | Flema | Star C-LC | 1996 (500 crates/h) - Decapper/decapper | ADELSKI | PPE 2005 | 1995 (2,000-12,500 bph, 8,500 operating hours) - Bottle washer | PAC | CB 14-0.5l-R-7 LII Compact | 1998 (7,500 bph, 14,175 operating hours) - Filler | ICS | multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 | 2011 (6,000 bph, 7,200 operating hours) - Labeling machine | ANKER | Roland 8/3 | 1998 (7,000 bottles/hour, 14,500 operating hours)

Condition: used, Year of construction: 2008, Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  - Output: 1,500 bottles/hour - Formats included: 700 ml, 1,000 ml Nodpsvzymhsfx Amyjcw - Last used for: Spirits Scope of delivery - Feeding table - Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 - Conveyor belt (single-track) | Krones - Labeler | Enos | T3 | 2017 - Inkjet printer | Makroprint | X1 Jet | - - Inkjet system | Linx | 5900 | -

Condition: used, Year of construction: 2017, Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details - Semi-automatic new glass pusher with interchangeable gripper units - 4 heads: adjustable depending on the layer pattern - ALWID FEEDING TABLE + ALWID DEPALLETIZER Nedpfx Amsvtpc Ajyocw

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  - Capacity: Max 6,000 b/h - Formats: - 0.210L, - 0.355L, Ncodpfx Asvm U Dlomysw - 0.500L glass bottles - 26mm metal crown caps - Dimensions: - Width: 5,300 mm - Depth: 2,630 mm - Height: 2,860 mm - Weight: 8,000 kg - POWER SUPPLY: - Main: 460V – 60Hz – 3F+N+T - Auxiliary: 24V DC - Machine main motor: 4 kW - Installed power: 9 kW Scope of Delivery  - Triblock (rinser, filler, and capper) - Selfadhesive Labeller with 2 stations - Conveyors

Condition: excellent (used), Year of construction: 2018, operating hours: 12,714 h, functionality: fully functional, For sale is a wire belt blasting system from the renowned manufacturer Rösler, model RDGE 1000-4 HD. The system is in perfect condition and fully functional. A viewing under power is possible at any time after prior arrangement by telephone. If you are interested or have any further questions, please do not hesitate to contact us. Nodpfxjvmwrle Amyscw

Condition: used, Year of construction: 1998, Overview This complete glass bottling line was manufactured between 1996 and 1998 by various European manufacturers. The line is designed for the filling and packaging of bottles and includes depalletizing, rotary light vacuum filling, capsule application and smoothing, corking and screw capping, and automatic palletizing. The equipment is suitable for automatic bottling operations with a production capacity of approximately 10,000 bottles per hour.  Technical data - Capacity: approx. 10,000 bottles/hour Ncjdjzh Ikdspfx Amyew - Application: Automatic bottling and packaging of bottles - Filling system: Light vacuum filling - Rinser: Penetrating nozzle rinser - Cleaning system: Compatible with automatic CIP cleaning - Closure types: - T-top corks - Pilfer caps - Stelvin caps - Compatible closure sizes: - 31.5 × 44 mm - 30 × 60 mm - Capsule application: Automatic capsuling machine with integrated thermal heads for PVC capsule smoothing - Capsule smoothing: Automatic smoothing machine for complex capsules and tin capsules - Palletizer: - Drag-type automatic palletizer - Compatible with European and American pallets - Format memory for up to 15 palletizing patterns - Utilities: - OCME Dorado 162-T Depalletizer: 6 kW - Irundin 36/44-8 Filler: 10 kW - Robino & Galandrino M. Monostadio Z T 6: 4 kW - Nortan Aurora 160: 3 kW - Tedelta CR 504: 3 kW - OCME P115/N/S Palletizer: 15 kW Scope of Delivery  - Depalletizer | OCME | Dorado 162-T | 1998 | High-speed drag depalletizer - Rotary filler | Irundin | 36/44-8 | 1998 | Light vacuum filler with penetrating nozzle rinser and CIP compatibility - Capsule applicator | Robino & Galandrino | M. Monostadio Z T 6 | 1998 | Automatic capsuling machine with integrated thermal heads - Capsule smoothing machine | Nortan | Aurora 160 | 1996 | Automatic capsule smoothing machine - Corking and screw capping machine | Tedelta | CR 504 | 1998 | Automatic closure application for corks, pilfer and Stelvin caps - Automatic palletizer | OCME | P115/N/S | 1998 | Drag-type palletizer with format memory

Condition: used, Year of construction: 2021, Sinterit Multi PHS + Sandblaster – Accessories as Shown in the Photos, No Vacuum Cleaner, 2021 The Sinterit Multi PHS (Powder Handling Station) with Sandblaster is a professional post-processing solution designed for SLS 3D printing applications. It supports an efficient workflow for powder removal, material handling, and part cleaning, helping improve cleanliness and convenience during post-processing. This offer includes the Sinterit Multi PHS, Sandblaster, and accessories as shown in the photos. Please note that the vacuum cleaner is not included. Production year: 2021. Key features: Professional powder handling and post-processing station for SLS printing Ncodsywurvspfx Amysw Supports powder cleaning, sieving, and part finishing processes Includes Sandblaster for surface cleaning and finishing Accessories included as shown in the photos Industrial-grade design suitable for professional use Included in the offer: Sinterit Multi PHS Sandblaster Accessories as shown in the photos Vacuum cleaner not included

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, refurbished in 2023 NEW: - slides on both sides - conveyor - conveyor slats - tool kit Ncjdpfx Aezk Ew Temyjw

Condition: good (used), Year of construction: 2006, total length: 16,500 mm, - washing machine (requires renovation) - assembly station - panel press without gas filling, in good condition (size 2100 x 2500 mm) Nodpfx Aezk A Hxjmyocw - knockdown table - year: 2006 - line length: 16.5 m - direction: right to left

Condition: refurbished (used), Year of construction: 2011, functionality: fully functional, Bavelloni Gemy V10 vertical straight-line grinding machine with 10 spindles and a variable mitre function, in fully refurbished condition. The machine features an extended infeed and outfeed. Only original parts were used during the refurbishment. Ncodpjzkumdjfx Amysw