Used Glass Lamination for sale (4,320)

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 1303, total width: 4,400 mm, total length: 3,300 mm, total height: 1,700 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, feed length X-axis: 3,210 mm, feed length Y-axis: 3,300 mm, cutting length (max.): 3,300 mm, We offer this Hegla VSG-M 33 MT laminated glass cutting table, which is in very good condition and was manufactured in 2005. Manufacturer: Hegla Model: VSG-M 33 MT Year of manufacture: 2005 Condition: very good ID Category: 518 ID Machine Type: 898 Type: laminated glass cutting table Crjdpfx Asz Hl T Roiisi If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Year of construction: 2015, condition: excellent (used), Microglass FLY 600 Glass Lamination Furnace – a professional machine for the production of laminated glass. For sale is a professional Microglass FLY 600 lamination furnace designed for the production of laminated glass using the vacuum method. The machine is ideally suited for glassworks producing safety glass (VSG), decorative glass, glass with EVA film, and for drying coatings. The unit is equipped with a modern heating system based on infrared (IR) emitters and forced hot air circulation, which ensures uniform temperature and high lamination quality. (mitindustrial.it) Technical specifications: ● Model: FLY 600 ● Manufacturer: Microglass / MIT ● Application: glass lamination, drying of paints/coatings ● Working area: Codozga H Iepfx Aiisri ● 1 platform 1800 × 3200 mm ● Working chamber height: 600 mm ● Number of working drawers: 1 ● External machine dimensions (closed): ● approx. 2450 × 4230 × 1350 mm ● Length with open drawers: approx. 8500 mm ● Machine weight: approx. 3100 kg ● Installed power: 45 kW ● Power supply: 400 V, 3 phases, 50 Hz ● Average energy consumption per standard cycle: approx. 27 kWh ● Lamination temperature: 130°C ● Drying temperature: 150°C ● Vacuum pump: ● two-stage ● power approx. 1.5 kW ● Control: ● touch panel ● digital vacuum gauge ● Programs: ● up to 256 programmable recipes ● possibility to set time cycles ● Heating system: ● tubular IR emitters ● hot air circulation ● Forced cooling: YES ● High-strength silicone membrane ● PTFE mesh to improve vacuum parameters ● Possibility to use an additional drawer to increase productivity (mitindustrial.it) Machine advantages: ✔ large production format ✔ high lamination quality without air bubbles ✔ economical operation for serial and single production ✔ intuitive operation via touch screen ✔ solid industrial construction ✔ ideal for VSG, decorative glass, and custom projects The machine is ready for operation. An excellent solution for professional glassworks looking for an efficient lamination furnace.

Condition: used, Year of construction: 2006, functionality: fully functional, Lisec laminating line with Scholz autoclave and Kaeser compressor. The line is disassembled but fully functional. The photos show both the period when it was operational and the current situation with the disassembled components. Crsdpew Tyk Iofx Aiiei

Condition: excellent (used), Year of construction: 2021, operating hours: 120 h, functionality: fully functional, total height: 2,500 mm, total width: 3,000 mm, total length: 10,000 mm, TECHNICAL DATA * Standard dimensions of vacuum bags: 2650 x 5,150 mm * Dimensions for flat glass lamination (using silicone bags): 2,500 x 5,000 mm * Lamination frames: two * Maximum load per lamination frame: 1,200 kg distributed over the entire surface. * Vacuum pumps: two (one for each frame) * Heating zones: 9 zones, each monitored by a thermocouple. * Temperature measurement of heating chambers: 9 + 1 thermocouples connected to the PLC system. * Vacuum control and monitoring: Digital pressure sensors connected to the PLC system on the operator panel. * Overheat protection: one independent thermocouple inside the chamber, with the ability to cut off the power circuit in case of furnace overheating. * Electrical panel, control panel, and wiring: manufactured according to "EC" guidelines. * Safety features: according to "EU" guidelines. * Installed power / power supply: 54 kW per chamber. 400V 50 / 60Hz, three-phase + N + T * Average consumption: < 20 kW per hour. * Control / monitoring system with TEMA 2020 SOFTWARE: -PLC system and intuitive operator graphic interface with touchscreen. -Multilingual -Up to 6 (six) settings, with no time limitations. -Real-time graphs: average temperature of the furnace and modules, each heating zone, vacuum (with the possibility of disconnecting the pump at any time). -Power consumption. -Historical archive of data from the last 500 hours of production, displayed in a graphic and text file. -Log of all operations and alarms. Crsdjz Ihikepfx Aiioi -Program < EASY MAINTENANCE > for vacuum pumps. -Delayed start of the process (for night use) -kW meter. -Remote control from various devices (smartphone, tablet, computer, etc.) -Report of the entire lamination process downloadable via USB. -Remote assistance LIFT – lifting platform * Lifting platform with servomotor assistance to align the lamination frames with the laminating frame. Essentially consists of a single hydraulically controlled lifting platform, equipped with appropriate tracks for moving the lamination frame.

Condition: used, overall weight: 40,000 kg, No. 3282 Float and laminated glass cutting line Lisec ESL-60/30RS / VB-33 Used, year of construction 2009 / 2016, line still in operation, expected to be available from 15.02.2027 According to our customer / the previous owner, the line is fully functional and can be inspected on site Scope of delivery Only the areas framed in yellow in the layout Laminated glass cutting items 1 - 8, float glass cutting items 9 - 22 Item numbers as marked on the photos Key technical data Designed for jumbo size 6000 x 3210 mm Float glass cutting up to max. 33 kg/m2 glass weight, corresponds to approx. 13 mm glass thickness Laminated glass cutting up to max. 43 kg/m2 glass weight, corresponds to approx. 17 mm glass thickness 2 laminated glass cutting bridges Lisec VB-33 for higher output Automatic cutting table with grinding unit for edge deletion (Low-E) Automatic breaking in X and Y direction Conveyor sections up to max. 50 kg/m2 Power supply 3/N/PE 400 V / 50 Hz, control voltage 24 V Compressed air 6 - 8 bar Total of the stated connected loads approx. 210 kVA Laminated glass cutting Item 1: Laminated glass cutting machine Lisec PTV-60/30RE, year of construction 2009, approx. 5640 kg Item 2: Assembly Lisec VZ Line 2 Item 3: Air cushion table Lisec LKT-45/45TS, year of construction 2009, 61.28 kVA, approx. 3200 kg Item 4: Laminated glass cutting bridge Lisec VB-33, year of construction 2009, 17.00 kVA, approx. 2200 kg Item 5: Film overhang removal Lisec FASV-33, year of construction 2016, 0.83 kVA Item 6: Laminated glass cutting bridge Lisec VB-33, year of construction 2016, max. 43 kg/m2, 18.83 kVA, approx. 2200 kg Crodpfxj Af Aqwe Aiiei Item 7: Stop and positioning station Lisec AL-32/33N, year of construction 2016, 25.88 kVA, approx. 1830 kg Item 8: Belt conveyor section Lisec BTA-20/26, year of construction 2016, max. 50 kg/m2, 6.08 kVA, approx. 1020 kg Float glass cutting Item 9: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 6.08 kVA, approx. 1020 kg Item 10: Belt conveyor section Lisec BTA-40/26 Item 11: Belt conveyor section Lisec BTA-20/26, year of construction 2016, 9.05 kVA, approx. 1020 kg Item 12: Manual breaking table Lisec BTS-37/33, year of construction 2016, 15.75 kVA, approx. 1543 kg Item 13: Air cushion table Lisec LKT-10/33, year of construction 2016, max. 33 kg/m2, 4.50 kVA, approx. 250 kg Item 14: Belt conveyor section Lisec BTA-40/26, year of construction 2009, max. 50 kg/m2, 2.30 kVA, approx. 1154 kg Item 15: Breaking unit Lisec TBY-26/12, year of construction 2009, approx. 255 kg Item 16: Conveyor section Lisec RWF-33/25, year of construction 2009, 4.59 kVA, approx. 975 kg Item 17: Belt conveyor section Lisec BTA-30/33, year of construction 2009, 2.30 kVA, approx. 980 kg Item 18: Assembly Lisec RBA-25, year of construction 2009, 1.46 kVA, approx. 820 kg Item 19: Breaking unit Lisec TBX-33/12, year of construction 2009, approx. 290 kg Item 20: Belt conveyor section Lisec BTA-60/33, year of construction 2009, 18.22 kVA, approx. 1560 kg Item 21: Automatic breaking station Lisec ARS-33, year of construction 2009, approx. 580 kg Item 22: Automatic cutting table Lisec ESL-60/30RS, year of construction 2009, max. 33 kg/m2, 14.90 kVA, approx. 6380 kg Total weight approx. 40000 kg Sale on behalf of customer, ex location near 97076 Würzburg, without dismantling, transport and assembly On-site inspection is possible and recommended Any warranty is excluded, sold as seen / as is

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Cjdez Dhm Uspfx Aiieri

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm Codjyh T Rujpfx Aiijri 4 unloading arms new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Condition: excellent (used), 5 pieces, A-rack, support per side: 390 mm External dimensions: Width: 2420 mm Depth: 1360 mm Height: 2530 mm Crjdpfx Aisxat Uljiei

Condition: excellent (used), Year of construction: 2021, machine/vehicle number: 114/2021, functionality: fully functional, operating hours: 120 h, input voltage: 400 V, input current: 35 A, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 40 mm, total width: 1,700 mm, total length: 20,000 mm, total height: 4,000 mm, pressure: 8 bar, HIGH-SPEED DRILLING AND MILLING MACHINE: a compact, high-performance vertical machine suitable for drilling and milling rectangular glass sheets. Ideal for series production and can be integrated with grinding lines or used as a stand-alone unit. The machine can process glass with the following properties: Csdpfxsz Ihfxj Aiisri Technical specifications of the drilling and milling machine: Technical specifications of the vertical washing machine Glass type: Clear/extra clear, coated, colored in the mass Glass shape: Rectangular Minimum dimensions of glass processed by the drilling machine: 500x300; minimum dimensions of glass for the washing machine: 150x400 Maximum dimensions: 2400x4000 Thickness: 3-12 mm Hole diameter: 6-40 Working height: 600 ±50 mm Power: 22 kW

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. Csdpfjz Ru Iyjx Aiisri The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: like new (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, total width: 2,600 mm, total length: 3,700 mm, overall weight: 2,700 kg, type of input current: three-phase, input voltage: 6,000 V, input frequency: 50 Hz, pressure: 6 bar, Automatic glass cutting table for monolithic glass with loading-unloading arms. Main features: - Rectified rack-and-pinion transmission and linear guides with “0” clearance, ensuring high precision of movement on both axes. - Metal structure made of sheet metal profiles cut on a laser cutting machine and formed on a bending machine. The resulting structure has a minimum number of weld seams and, therefore, high dimensional accuracy and stability. - Latest generation, brushless electric motors, Lenze – Germany. - Automatic detection of glass thickness and automatic adjustment of the cutting head pressure to achieve maximum cutting quality. - The control panel can be located up to 7 meters away from the table. - Hydraulic folding of the loading-unloading arms. - The loading cycle is as follows: the extensions of the folding arms are manually pulled out, and the folding into the vertical plane is commanded. The glass is supported on the bases of the arms, and the folding is commanded. After the glass reaches the horizontal plane, it is manually positioned by the operator anywhere in the cutting area. - Automatic detection of the glass position (automatic squaring) and automatic correction of the cutting head trajectory (the glass can be positioned anywhere on the surface of the cutting table). - “Double 0” system that allows mirror cutting of laminated glass with an accuracy of ± 0.5 mm. General feature: - The work surface of the Turomas tables is made of aluminum covered with a phenolic plate that is ground on one side, and a synthetic felt is glued on top. Since there are no wooden plates in the structure, there are no pressure losses in the air cushion. Also, due to the phenolic plate (a latest generation plastic), the work surface of the table is particularly resistant to mechanical impact, deformation, solvents, acids, humidity, and water vapor. - Intuitive TUR-ISO operator interface, easy to use, developed in a single window. The cutting plan can be viewed and edited in a field of this window. The Maintenance menu can also be accessed from this window, where all the set parameters of the machine can be viewed and modified. Crodpfxoz Rvi Es Aiisi - Remote technical support system via the Internet for quick diagnosis and service. - Protection system with barriers and emergency stop button. - Scanner Scanning is done through a sequence of points, which are then converted into curves. The template thickness can be up to 20 mm. - VIN-CUT vinyl cutting - BRK 23 system - Consists of 1 transverse breaking bar + 1 longitudinal breaking bar (materialized by points). This breaking system guarantees minimal contact with the glass surface and maximizes the reduction of potential scratches due to the wear of traditional breaking bars (with a wooden contact surface). Automatic system for transferring the cut glass sheet from the cutting table to a breaking table. The system is mounted on the cutting bridge, on the opposite side of the cutting head, and consists of two vertical pistons that allow the glass to be moved to the next table. Cutting head with two cutting rollers. The table reads the glass thickness and automatically selects which of the cutting rollers to lower. By using this option, the entire range of glass thicknesses that can be cut is covered, in the range of 2 - 25 mm.

Year of construction: 2023, operating hours: 16 h, condition: like new (used), functionality: fully functional, GCV Glass Picasso V2 260 glass painting machine, year of manufacture 2023, condition - as new. AUTOMATIC PAINTING MACHINE GCV Picasso-V2 260 Max. Glass Width (mm): 2600mm Max. Glass Length (mm): unlimited Max. Glass Weight (kg): 600 kg Min. Glass Size * Width * Length (mm): W 220mm * D 900mm (single panel size) ADDITIONAL PRODUCTION EQUIPMENT 1 pc. transport table, equipped with wheels 1 pc. large stand for drying and storage portable sample boards with color palettes Crodpfxozhagkj Aiiji Mixer with pigment stand, Number of containers: 24, Container volume: 2.3 l

Year of construction: 2009, condition: ready for operation (used), Combined automatic float and laminated safety glass (VSG) cutting line manufactured in 2009. This LISEC Combined VSG & Float Glass Cutting Line features a robust configuration with breakout, transport, and trimming modules. It is currently installed and running in active production, allowing for turnkey inspection. If you are looking to get high-quality glass processing capabilities, consider the LISEC Combined VSG & Float Glass Cutting Line we have for sale. Contact us for further details. Crjdpfx Aij Agixysioi - Plant Configuration: Combined automatic float and laminated safety glass (VSG) cutting line with breakout, transport, and trimming modules- System Manufacturer: LISEC Austria GmbH / LISEC Maschinenbau GmbH- Years of Manufacture (Line Integration): 2009 & 2016 (mixed installation)- Operational Status: Currently installed and running in active production (turnkey inspection possible)- Standard Line Voltage: 400 V / 50 Hz (3/N/PE~ 400V, Control: 24V AC/DC)- Operating Compressed Air: 6.00 – 8.00 bar- Total Cumulative Installed Weight: > 28,400 kgMODULE BREAKDOWN & INDIVIDUAL SPECIFICATIONS:1. VSG (Laminated Safety Glass) Processing Section:- Pos 01: LISEC PTV-60/30RE (YOM: 2009) * Type: Laminated glass cutting machine (Verbundglasschneidanlage) * Weight: 5,640 kg | Electrical: 400 V / 50 Hz- Pos 02: LISEC VZ Linie 2 (YOM: N/A) * Type: Assembly unit / line connection section- Pos 03: LISEC LKT-45/45TS (YOM: 2009) * Type: Processing / support air-cushion table * Weight: 3,200 kg | Connected Load: 61.28 kVA | Air: 8.00 bar- Pos 04: LISEC VB-33 (YOM: 2009) * Type: Laminated glass line sub-assembly * Weight: 2,200 kg | Connected Load: 17.00 kVA | Air: 6.00 bar- Pos 05: LISEC FASV-33 (YOM: 2016) * Type: Automated protruding PVB film trimmer/remover * Weight: Not specified | Connected Load: 0.83 kVA | Air: 6.00 bar- Pos 06: LISEC VB-33 (YOM: 2016) * Type: Cutting machine for laminated glass * Weight: 2,200 kg | Connected Load: 18.83 kVA | Air: 6.00 bar | Max Load: 43 kg/m²- Pos 07: LISEC AL-32/33N (YOM: 2016) * Type: Glass stop locator and positioning section * Weight: 1,830 kg | Connected Load: 25.88 kVA | Air: 6.00 bar- Pos 08: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar | Max Load: 50 kg/m²2. Float Glass Processing & Transfer Section:- Pos 09: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 6.08 kVA | Air: 6.00 bar- Pos 10: LISEC BTA-40/26 (YOM: N/A) * Type: Horizontal transport / support table * Weight: Not specified | Electrical: Not specified- Pos 11: LISEC BTA-20/26 (YOM: 2016) * Type: Horizontal belt transport conveyor * Weight: 1,020 kg | Connected Load: 9.05 kVA | Air: 6.00 bar- Pos 12: LISEC BTS-37/33 (YOM: 2016) * Type: Manual breakout table with integrated breaking bars * Weight: 1,543 kg | Connected Load: 15.75 kVA | Air: 6.00 bar- Pos 13: LISEC LKT-10/33 (YOM: 2016) * Type: Horizontal air-cushion transfer table * Weight: 250 kg | Connected Load: 4.50 kVA | Air: 6.00 bar | Max Load: 33 kg/m²- Pos 14: LISEC BTA-40/26 (YOM: 2009) * Type: Horizontal belt transport conveyor unit * Weight: 1,154 kg | Connected Load: 2.30 kVA | Air: 8.00 bar | Max Load: 50 kg/m²- Pos 15: LISEC TBY-26/12 (YOM: 2009) * Type: Intermediate transport module * Weight: 255 kg | Connected Load: 0.00 kVA | Air: 6.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Listing Title Complete Glass Laminating Line PUJOL LAM/PRO T TRA (50x28) with Overhead Crane, Steel Structure & EVA Dispenser (2019) Key Technical Data Category: Glass processing machinery / Glass laminating ovens Manufacturer: HORNOS INDUSTRIALES PUJOL S.A. (Barcelona, Spain) Model: LAM/PRO T TRA Credpfx Aio Af E S Deiji Manufacturing Serial Number: 19/244 (Year of manufacture: 2019) Capacity / Max Glass Size: 50x28 (approx. 5,000 x 2,800 mm) Installed Heating Power: 182 kW Maximum Operating Temperature: 160 °C Operating Voltage: 380 V (3-phase) Certification: CE certified Condition: Used, excellent / very low working hours, fully assembled and ready for inspection Scope of Delivery & System Configuration 1. Multi-Chamber Vacuum Laminating Furnace: Brand/Model: PUJOL LAM/PRO T TRA Features: Multi-level EVA vacuum laminating chambers, high thermal efficiency, independent electrical control cabinet, and exhaust cooling fans. 2. Hydraulic Scissor Lift Table:Rail-guided mobile lifting table designed for seamless loading and unloading across all furnace levels. 3. Overhead Crane & Supporting Steel Gantry Structure:Free-standing heavy-duty steel structure with runway beams and columns spanning the processing line. Overhead crane hoist for handling and positioning large glass panes. 4. PUJOL EVA Film Unwinding & Cutting Station:Dedicated freestanding foil dispenser unit equipped with pneumatic tensioning and an integrated operator control panel. 5. Auxiliary Assembly Tables:Multi-directional caster/roller conveyor tables for smooth pane alignment and transfer.

Condition: excellent (used), functionality: fully functional, Glass transport rack A type Loading height: 1800 mm Loading width (glass thickness): 400 mm each side Total rack dimensions: 1150 x 1150 mm Approx. 65 pcs. available Very good and clean condition Csdpfx Aieznufuoisri As is Available immediately

Condition: not inspected (used), Zafferani Glas Company Flat 4FPE/25 Length 4.30m Height 2.36m The machine was purchased from a bankrupt company. The previous owner claims it worked fine the last time he turned it on. Cjdjxp A H Ajpfx Aiieri

Condition: new, Year of construction: 2024, total height: 1,800 mm, total width: 1,000 mm, total length: 2,000 mm, Glass storage rack suitable for storing and transporting glass and other sheet goods. Load capacity: 2000Kg Length: 2000mm Width: 1000mm With appropriate inclination angle. The racks are suitable for cranes, with points suitable for connecting a crane on top. With rubber pads to prevent damage to the stored glass or other materials. Cedpfx Aisxddcheieri A forklift space is provided at the bottom. The racks are completely new, have CE certification and a data plate. Discount for larger quantities! Ask about stock!

Condition: used, loading : 75 to 80 % 2,77 kW tiltable drum with 2 arms pneumatic: 6 bar outside dimensions (l x w x h) : ± 2.110 x 1.100 x 1.650 mm Cjdpfj Ahw Hpox Aiijri

Condition: good (used), Year of construction: 2007, functionality: fully functional, total width: 4,015 mm, total length: 13,640 mm, total height: 940 mm, overall weight: 8,300 kg, input current: 32 A, input voltage: 400 V, input frequency: 50 Hz, compressed air connection: 6 bar, pressure: 6 bar, cutting length (max.): 3,700 mm, Project / Item: Used Hegla glass cutting line (year of manufacture 2007) Hegla EcoLam 37 Plus: Laminated safety glass (LSG) cutting system with integrated loading arms. (2007) Hegla LT 2034: Fixed transport table for glass transfer within the cutting line. (2007) Hegla LKTR 7034: Combined transport and tilting table, equipped with air cushions and conveyor belts. (2007) 2. TECHNICAL SPECIFICATIONS OF THE SYSTEMS 2.1 Hegla EcoLam 37 Plus (LSG cutting system) - Equipment: Integrated loading arms for automatic/manual glass handling - Dimensions: Length: 3,280 mm | Width: 4,780 mm | Table width: 4,015 mm - Working height: 940 mm - Maximum glass dimensions: 6,100 mm x 3,210 mm - Maximum cutting length: 3,700 mm - Stop length: 160 mm to 2,000 mm - Cutting accuracy: +/- 0.5 mm - Weight: 4000 kg - Glass thickness (LSG): 2 x 3 mm to 2 x 8 mm - PVB film thickness: 0.38 mm to 3.8 mm - Connection values: 3 x 400 V / PE, 50 Hz | Power: 20 kW - Air pressure: 6 bar 2.2 Hegla LT 2034 (Transport table) - Function: Fixed station for intermediate transport - Dimensions: Length: 2,000 mm | Width: 3,400 mm - Working height: 3,400 mm - Weight: 800 kg - Maximum glass dimensions: 3,210 mm x 6,100 mm - Connection values: 3 x 400 V / PE, 50 Hz | Air pressure: 6 bar 2.3 Hegla LKTR 7034 (Transport and tilting table) - Function: Transport table with tilting function, integrated conveyor belts and air cushion system - Dimensions: Length: 7,000 mm | Width: 3,450 mm - Working height: 940 mm - Total weight: approx. 3,500 kg - Connection values: 400 V, 50 Hz | Power: 11 kW (according to layout drawing max. 17 kW / 45A) | Air pressure: 6 to 8 bar Total length of the core line: 13,640 mm - EcoLam area: 4,610 mm - LT area: 2,030 mm Crodpfx Aisz Apcwjisi - LKTR area: 7,000 mm

Condition: like new (used), Year of construction: 2025, functionality: fully functional, Harp racks for glass transportation 60 loading slots Maximum loading height: 1300 mm Maximum loading capacity: 1500 kg 5 pcs. in stock New, never used ! Csdpfxsznlrfj Aiieri Available immediately

Condition: like new (used), Year of construction: 2024, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 90L0865829G_00, overall weight: 1,000 kg, input frequency: 50 Hz, type of input current: AC, input voltage: 400 V, The CMS Proxima is an automatic horizontal edging machine (dry edging machine) from CMS Glass Technology for processing glass edges. Processing length: The maximum working length per cycle is approximately 2.6 to 2.7 meters (larger panes can be accommodated). Csdpfjz E Axzex Aiisri Glass thickness: Can process glass from approximately 4 to 19 mm. It can be operated either as a stand-alone unit (with a simple setup table) or in combination with tilting float cutting tables or laminated safety glass (VSG) cutting tables.

Condition: good (used), Year of construction: 2022, operating hours: 634 h, Manufacturer: Glass Model: VSM80F Year: 2022 Condition: Used Serial Number: 4396 Cjdpfjy S Txqsx Aiisri Stock Number: 3377 Capacity: 80 litres Infeed height: 950 mm Outfeed height: 870 mm Compressed air: 6 Bar Steam: 4 Bar, DN25 Power: 3 x 400V, 50Hz, 2.8kW Dimensions: 1400 x 2100 x 1650 mm Weight: 780 kg With double jacket and direct steam injection nozzles. Including temperature sensor and 10.4" touch screen. Only 634 hours, in new condition!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, The equipment is available for sale as a complete system or in individual parts/components. DIP-TECH AR 6000 digital glass printing system, manufactured in 2013, with an integrated drying module. Crsdpfx Asymb Tqsiisi The machine can be dismantled and sold as spare parts. This is the last opportunity to purchase a complete, fully operational system. Please contact us for further information, specifications, photos, available components, and pricing. Technical specifications: • Max. glass size: 3000 × 6000 mm • Min. glass size: 500 × 500 mm • Glass thickness: approx. 4–19 mm • Printing technology: Digital ceramic ink printing directly onto glass • Drying module: Integrated dryer included • Ink type: Ceramic inks – suitable for tempering • Printing technology: Digital ceramic in-glass printing • Application: Architectural and interior glass • Glass types: Float, tempered, laminated Key Advantages: ✔ Large-format industrial printer (6-meter capability) ✔ Integrated drying module – faster production cycle ✔ Improved ink stabilization before tempering ✔ Reduced print defects and handling risks ✔ Suitable for façade, architectural, and interior glass ✔ Machine in production – ready for immediate operation

Condition: reconditioned (used), Year of construction: 2018, STORK VS 24/8 Monobloc Bottling Line, fully refurbished by the professional company Z.M. ROBAK. The machine is virtually unused, with the protective film still on the housing. Currently, it is set up for filling glass containers – it has been test run for bottling alcohol. Filling valves: 24 pcs (with light vacuum for still beverages) Capping heads: 8 pcs (configured for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Capable of operating with bottles of the following dimensions (after format adjustment): - Diameter: 45 mm to 110 mm - Height: 105 mm to 400 mm Codpfou Nhiqjx Aiijri - Standard neck diameter: 28 mm - Optional neck diameter (after format change): 18 mm to 43 mm Machine dimensions: - Width: 2,900 mm - Height: 2,200 mm - Depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – has not been used in production since refurbishment Condition: The machine is practically as new, with negligible signs of use. The machine comes with original electrical documentation.

Condition: used, Year of construction: 1996, SCHIATTI FPS 20R – Year 1996 Csdpfxo Ah T S Us Aiijri Straight-Line Edge Grinding Machine 9 Wheels • Processing: Performs flat edge grinding and polishing with arris edges and a 45° front bevel (with a polished cerium oxide finish). • Glass thickness: 3 to 20 mm. • Maximum sheet weight: Up to 1000 kg. • Minimum sheet dimensions: 150 x 150 mm (reducible to 70 x 70 mm with the optional corner-cutting device). • Control: Managed via PLC display for programming and controlling polishing wheels, thickness, and feed speed. • Applications: Ideal for producing mirrors, shelves, bathroom fixtures, laminated glass, tables, and steps.