Used Romania for sale (630)

Condition: ready for operation (used), Gear hobbing machine type FD320, FD500 and FD 800 Cugir Maximum module 6 to 10 mm Max. working diameter 320 to 800 mm Pjdpfx Ajcrd Nmjmyegp

Condition: ready for operation (used), Year of construction: 1984, Romanian Hot Former AMP 20, AMP 30, AMP 50 lines Press Capacity: 220 tons, 230 and 400 Podpfstaui Usx Amyegp Forming stations: 3, 3 and 4 Forming load: 900 kN, 2500 kN and 8000 kN Bar Diameter: 14 to 28 mm, 18-40, 28-55 mm Max. part outer diameter: 35 mm Cut-off length: 15 to 40, 20-72, 50-150 mm Ram stroke: 110 mm Ejector stroke: 55 mm Die center distance: 110 mm Production per minute: 12 to 180 Weight: approx. 11, 36 and 90 tonnes Technical documentation: yes Video under power available

Condition: ready for operation (used), Romanian Lathe SN 1800x3000 Manufacturer Uppetrom 1 MAY Chuck diameter 1800 mm Max swing over bed 1800 mm Length between centers 3000 mm Max swing over slide 1450 mm Pgodpfx Amov Uaufeysp Max weight of work piece between centers 25,000 kg Movie with machine underpower available

Condition: ready for operation (used), Romanian Slotters MH500, M 320 And M 200 Pgjdpfx Astz S Hcemyep Stroke 500mm, 320mm and 200mm

Condition: good (used), Electric motor, three-phase motor -Manufacturer: EP Romania, electric motor type MA24F165S-2 -Power: 1.5 kW -Speed: 2855 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP44 -Dimensions: 295/200/H220 mm -Weight: 18 kg Pedpfxspu Itfe Amysgp

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, Podju Nad Tspfx Amyjgp labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets.

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5. Pjdpfey A Ngljx Amysgp

Condition: new, Year of construction: 2026, functionality: fully functional, power: 9 kW (12.24 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 2,200 mm, travel distance Y-axis: 2,900 mm, travel distance Z-axis: 350 mm, workpiece length (max.): 2,800 mm, workpiece width (max.): 2,100 mm, workpiece height (max.): 300 mm, number of axes: 3, number of slots in tool magazine: 12, actuation type: electric, total height: 2,275 mm, total length: 4,060 mm, total width: 3,315 mm, overall weight: 1,700 kg, Equipment: documentation/manual, The 2128 PANA ATC is a next-generation DANIBRUM CNC router, designed for modern workshops and manufacturing facilities seeking high productivity, consistent precision, and efficient automation in a single, fully integrated machine. Equipped with a 12-position automatic tool changer (ATC) and ISO30 tool holder system, the machine offers rapid tool changes and extended flexibility for processing a wide variety of materials: particle board, MDF, solid wood, plastics, Alucobond, and composites. Pgsdpfxeymcnce Amyep The robust machine frame is supported by 25 mm linear guides, helical rack and pinion drives M1.25, and 750 W servo motors, ensuring fast, smooth movements and precise positioning across all axes. The 9 kW air-cooled electrospindle, with speeds up to 18,000 rpm, is controlled by an 11 kW inverter, allowing fine speed adjustment and stable performance under load. The result is a reliable, fast, and versatile CNC router, tailored to the current demands of furniture production and industrial processing.

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 60,000 kg, wheel width: 4,300 mm, feed length X-axis: 2,200 mm, feed length Y-axis: 2,500 mm, feed length Z-axis: 1,500 mm, position of the milling head: 0,02, table diameter: 3,500 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 6,000 mm, wheel diameter: 4,300 mm, total height: 7,000 mm, total width: 5,000 mm, workpiece diameter (max.): 4,300 mm, milling spindle length: 2,500 mm, type of input current: three-phase, milling length: 2,500 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 1 rpm, Vertical Turning and Milling Lathe VL 40 CNC Turning Center’s Specifications Nominal Turning Envelope Faceplate Diameter 3.500 mm Machining Diameter: -maximum -minimum 4.000 mm 0 mm Swing diameter 4.000 mm Machining Heights 2.000 mm Work Piece Weight 60,000 kg Nominal Turning Travels X - Axis Ram Carriage From -100 mm To 2.250 mm + ATC travel Z - Axis Ram 1.500 mm Work Table WorkTable Diameter 3.500 mm Normal face plate with T-slots Work Table Speed: -for machining 1 - 110 rpm Podpfx Aoy Dfrasmyegp Power Continuous S1/ S6 57/75 kW Torque Continuous S1 / S6 70,000 / 90.000 Nm Turning main drive mechanism Gear box reducer and belt transmission, C axis drive Work Table Milling Speed 0.02 to 2 rpm Milling Torque Continuous S1 43,000 Nm Locking Table Torque (hydraulic double side devices) 60,000 Nm Z - Axis Ram Turning & Milling Ram Ram Size 300 x 300 mm Tool shank size: Shank 32*32 / 40*40 mm automated tool clamping Ram Speed 0 to 2.500 rpm Power Continuous S1 22 kW Torque Continuous S1 1.400 Nm Driving mechanism ZF gearbox, two stages, belt transmission ZF gearbox and main spindle bearing sets are supplied with coolant systems, individually for each. Tool taper BT 50 DIN 69871 / automated tool clamping Tool Storage Number Of Tool Magazines two ATC -one for left side, 20 turning/milling/drilling stations -one for right side 20 milling/drilling and part probe Tool Storage 20 + 20 ATC turning capabilities: Maximum Singular Tool Weight – turning toolholder Maximum Singular Tool Weight – milling/drilling toolholder Total Tool Weight Maximum tool size – turning Maximum tool size – milling Maximum tool size - drilling Maximum length 50 kg 25 kg 600 kg 250 x 150 mm Dia. 300 mm Dia. 120 mm 600 mm Axes Drives X and U - Axes Ram Carriage Power Continuous S1 5.5 kW Thrust Continuous S1 40,000 N Z-Axis Ram Power Continuous S1 5.5 kW Thrust Continuous S1 40,000 N Power Continuous S1 11 kW Axes Rates X And Z - Axes Feed Rates 0.02 to 6,000 mm/min X And Z -Axes Rapid Rates 10,000 mm/min Coolant System Coolant Tank Capacity 2.000 L Coolant Pressure / Flow Rate: -internal coolant (turning) -internal coolant (milling) / pressure adjustments steps Filtration unit: -type 6 bar at 100 LPM 30 bar at 60 LPM Cartridge type Chips conveyor Conveyor type Hinged , frontal placed

Condition: used, According to our "General Terms and Conditions of Business" and without any guarantee or warranty, we are pleased to offer you the following vehicle today, subject to prior sale, errors, and typing mistakes: Craiova IH Wheeled Excavator Year of manufacture: 1978 (estimated) Hydraulic stabilizers front and rear (2 each) Engine runs Pjdpezk Srwofx Amyjgp Hydraulics must be filled with oil and made operational, but are functional Rotary servo 2 clamshell grabs Rotes Banner Döbeln, manufactured in 1974 Tyres 60-80% Rear axle steering Front axle drive Price: € 5,500.00 (VAT not deductible) All details provided without any guarantee or warranty. Our General Terms and Conditions of Business apply. The place of jurisdiction for both parties for disputes up to a value of € 50,000.00 is the Amtsgericht Ludwigslust; for disputes above this value, the Landgericht Schwerin. Subject to prior sale, errors, and typing mistakes.

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Pgjdpfx Amey Ud N Soyop Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Condition: ready for operation (used), VTL SC 14 cc Chuck diameter 1200 mm Max turning 1400 mm Max height of workpiece 1000 mm Aprox weight 16.1. to Psdpfjg D Hv Ijx Amysgp

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 400181806, measuring range X-axis: 100 mm, travel distance Z-axis: 3,500 mm, TECHNICAL DETAILS Measuring range, X-axis: 100 mm Measuring range, Z2-axis (column), travel: 3,500 mm Measuring range, Z2-axis (horizontal): 360 mm Resolution: 0.04 µm Resolution, X-axis: 0.05 µm Resolution, Z2-axis: 1 µm Measuring force: 30 mN (adjustable via weight setting) Drive speed, X-axis: 80 mm/s Drive speed, Z2-axis: 30 mm/s Measuring speed, X-axis: 0.0220 mm/s Straightness, X-axis: 0.8 µm/100 mm Tilt angle, X-axis: 45° Accuracy (20°C), X-axis: (0.8 + 0.01L) µm Accuracy (20°C), Z1-axis: (1.4 + |2H|/100) µm MACHINE DETAILS Operating temperature range: 15 to 25 °C Operating humidity range: 20 to 80 % RH (condensation-free) Storage temperature range: -10 to 50 °C Storage humidity range: 5 to 90 % RH (condensation-free) Dimensions & Weight External dimensions, main unit (W x D x H): 756 x 482 x 1,166 mm External dimensions, control unit (W x D x H): 221 x 344 x 490 mm External dimensions, remote control box (W x D x H): 248 x 102 x 262.2 mm Weight, main unit: 150 kg Pjdpfszkvqdsx Amyegp Weight, control unit: 14 kg Weight, remote control box: 0.9 kg EQUIPMENT Single-sided tapered probe (standard accessory)

Condition: new, functionality: fully functional, drilling depth: 55 mm, rotational speed (min.): 2,800 rpm, power: 3 kW (4.08 HP), table height: 875 mm, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, High productivity for drilling furniture sides The MAGGI Boring System 46 is a semi-automatic multi-spindle drilling machine, equipped with two parallel vertical heads, each with 23 drilling spindles. It is the ideal solution for furniture manufacturers who frequently drill holes in the sides of cabinets, bookshelves, wardrobes, or shelving units. Thanks to the two drilling heads, the machine drills two parallel rows of holes in a single work cycle, significantly reducing production time compared to a machine with a single head. Manufacturer MAGGI – Italy Number of spindles 46 pieces Spindles left - right 11 left, 12 right Distance between spindles 32 mm Distance between outer spindles 145 – 625 mm Distance front unit-fence 15 – 494 mm Distance rear unit-fence 160 – 639 mm Maximum vertical drilling depth 55 mm Maximum drilling tool diameter (Ø) 40 mm Drill shank diameter (Ø) 10 mm Hydraulic piston stroke 70 mm Maximum panel thickness 50 mm Maximum workpiece size Pgodpezp H Nzefx Amyjp 3000 x 700 mm Table height from the ground 875 mm Workpiece clamping pistons 6 pieces Number of motors 2 pieces Motor power 2 HP/ 1.5 kW Motor speed 2800 rpm Required air pressure 6-8 bar Air consumption 20 l/cycle Exhaust hood diameter (Ø) 80 mm Overall dimensions 1206 x 1180 x 1163 mm Net weight 366 kg Supply voltage 400 V – 3 Phase – 50 HZ

Year of construction: 2020, condition: excellent (used), We offer this stainless steel tank from Constructii Metalice Regent Nifa Grup, model Bazin de Inox, type Baxine de Inox, with a capacity of 37,000 liters, manufactured in 2020, in very good condition. Food-Grade Stainless Steel Tank, 37,000 Liters (37 Tons) – Ideal for Winery / Industry – Price: €10,000 (Negotiable) / Description: Selling a large-capacity stainless steel tank (37,000 liters / 37 tons), in very good technical condition. Due to its volume and high-quality material, it is ideal for industrial or agricultural use. Technical specifications: Capacity: 37,000 Liters, Material: Food-grade stainless steel (corrosion-resistant, ideal for sensitive liquids), Ideal for: Wine/beverage storage (winery), milk collection, vegetable oils, potable water storage, or buffer tank for fire protection systems (P.S.I.). P.S.: The tank is located in Constanța County. The location allows easy access for heavy machinery (crane, trailer/flatbed) for loading and transport. Loading and transport are the responsibility of the seller. For more details, additional photos, or to schedule an on-site viewing, please contact me by phone or WhatsApp. Please be serious. Pgsdpfx Aezp Dyqomyjp If you have any further questions or need more information, please do not hesitate to send us a message or call us.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We are offering for sale our Kuka laser welding robot KR60-3 with KRC4 ROBOTstar controller. The system is in very good condition and is being sold only due to a product change by a customer. Laser welding robot KR60-3 with KRC4 ROBOTstar controller. Scanner – processing optics in combination with a camera system for welding copper connections. Component feed via Bosch Rexroth transfer system TS 2 plus. Laser system from IPG with 5 kW power and a fiber output. Media supply. Rotary-tilting module DKP 400. Laser protection cabin, active according to EN 60825. Control panel / HMI for operating the system. Pedjvtnd Sopfx Amysgp KUKA system control and PLC cabinet. Extraction and filter system. The system will be sold from its current location (Zollner Electronic, Str. Parc Industrial Sud 10, Satu Mare 440247, Romania). We will gladly answer any questions you may have about the system and provide you with all relevant documentation. The new price of the system in 2019 was approximately €980,000. Inspection and demonstration are possible at any time by appointment. Special feature of the system: also suitable for deep copper welding!!!! Expected availability: Immediately. We would like to emphasize “explicitly” the very good technical and visual condition of the entire system!!! The camera head alone costs more than €85,000!!!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, total length: 6,800 mm, total width: 2,500 mm, total height: 3,700 mm, working height: 500 mm, input voltage: 400 V, overall weight: 6,000 kg, type of input current: three-phase, Lisec gas filling press FPS-36/27US, year 2006, working diresction from left to right, consisting of following: RTVN-27/27MZ, measuring section for gas filling press (length, height, glass thickness and spacer size) Podpfozpvx Sex Amysgp FPS-36/27US, gas filling for argon gas GML, gas dosing device The machine is in good working condition and will be sold as is EXW current location in Romania, dismantled and loaded to truck. It is available immediately

Condition: repair required (used), Year of construction: 2002, functionality: not functional, ★ PRICE REDUCED – MUST SELL: €50,000 (was €80,000) ★ We are selling 3 Imea 2002 Wood Dryers (Imea) + Steam Generator + Boiler (Elbi) 3 Wood Dryers and 1 Steam Generator: - Dimensions: 12.5m x 7.2m x 4.2m 📐 - Capacity for each dryer: 220m3 of timber 🌳 - Steam Generator: 8.5m x 6m x 5m 📐 - Aluminum structure, sandwich panels 🏗️ Wood and Sawdust Waste Boiler: - Equipped with a pumping system, pipes, and a boiler Pjdpfx Amepugxnoyjgp - Power: 3,500,000kCal/h (40,000kW) Everything operates on an automated system. Total: €80,000 excluding VAT 💰 Dismantling to be done by the buyer 🔧 the seller can assist with a telescopic manitou 📍 Pickup Address: Teiu 337291, Romania 🌍 For more information or to make an offer, please contact us.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 968832, Year of construction: 2018, operating hours: 3,500 h, load capacity: 3,000 kg, lifting height: 4,500 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: diesel, mast type: triplex, construction height: 2,120 mm, motor manufacturer: kubota, gearing type: hydrostat, fork length: 1,200 mm, fork width: 100 mm, fork thickness: 500 mm, ground clearance: 380 mm, tire condition: 100 %, front tire type: pneumatic tires (air-filled), rear tire type: pneumatic tires (air-filled), Equipment: 4th hydraulic function, CE marking, cabin, clamp, front guard, head guard, hydraulically sliding cabin, pallet forks, sideshift, 🚜 De vânzare – Manitou MSI 30 Diesel | An fabricație 2018 Putere, stabilitate și fiabilitate într-un singur utilaj! Manitou MSI 30 este alegerea ideală pentru aplicații industriale și terenuri dificile, oferind o capacitate de ridicare de 3.000 kg, transmisie hidrostatică pentru manevrare precisă și o gardă la sol ridicată, perfectă pentru utilizare atât în interior, cât și în exterior. (manitou.com⁠) ✅ An fabricație: 2018 ✅ Motor diesel fiabil ✅ Capacitate ridicare: 3.000 kg Psdpfx Amozpab Royegp ✅ Transmisie hidrostatică ✅ Stare foarte bună de funcționare ✅ Verificat și pregătit de lucru

Condition: new, Year of construction: 2026, working width: 1,300 mm, bending angle (max.): 135 °, sheet thickness aluminum (max.): 1 mm, total width: 1,900 mm, total height: 1,900 mm, warranty duration: 12 months, insertion depth: 1,250 mm, opening width: 105 mm, Equipment: documentation/manual, SUMMER DISCOUNT DINAMIC LINE Ltd. has been manufacturing machinery since 1994. All machines are certified, CE marked, and accompanied by a Declaration of Conformity. Our products are exported across the globe: Italy, Austria, Germany, Switzerland, Spain, Belgium, Turkey, Slovenia, Croatia, Bulgaria, Romania, Moldova, Hungary, Slovakia, Lithuania, Albania, Poland, Bosnia, Montenegro, Kosovo, North Macedonia, Australia, New Zealand, North America, Africa, Russia, Thailand, Malaysia, Tasmania, etc. By agreement with the customer, delivery can be organized under CPT (Carriage Paid To) terms to the customer’s premises. Assembly is not required - ready to use immediately. Quick delivery time Specifications: Working length: From 2 meters to 9 meters Working width: 1300mm Pgsdpfogmhxaox Amyop Space requirements: 8800 x 1900 x 1800 Metal sheet bending thickness: 0.8mm / Al - 1.00mm Bending angle: 135° Machine weight: 3500kg Power requirements: 3kw/16A Motor power: 2.2 kW Opening width: 105mm Insertion depth: 1250mm Bending beam thickness: 15mm or 20mm Foot switches: for 2 operator Characteristics: Ultra-fast Hyper production Hydraulic tightening and bending Electric cutting device Precise servo drive adding device Semi or automatic working mode Multi security system Automatic work by 1000 programs & subprogram Automation by PLC HMI Touch screen Friendly interface - incremental programming Remote programming & control Real time simulation & diagnostic LAN & Wi Fi communication Offset angle adjustment SPRING DISCOUNT

Condition: used, Used plant for production of both wet and dry CuSO4 Copper Sulphate with capacity of 1000 metric tons / month (approximately 12000 TPM). Plant was built in 2001 and shut down in December of 2024. Plant includes: - Equipment for production of wet technical grade copper sulphate; - Equipment for production of feed grade dry copper sulphate. The plant can produce up to 1000 TPD of wet crystals or 1000 TPD of dried product, or a combination of the 2 products, e.g. 300 TPD of wet and 700 TPD of dry. Equipment includes (2) Krauss Maffei pusher centrifuges and a Comessa Romania rotary dryer. Full equipment list available on demand. Psdjzmahljpfx Amysgp

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 364080, color channels: 2, paper width (max.): 1,000 mm, paper height (max.): 700 mm, counter reading (black): 345,000,000, counter reading (color): 345,000,000, type of input current: three-phase, KBA Rapida 105 offset press, equipped with a perfector and specially configured for printing on thin paper. Price: 99.500 EUR FCA Year of manufacture: 2002 Impressions: 345 million Format: 1000 × 700 mm Colours: 2+0 or 1+1 Perfector: Yes Pgsdpoznuyxofx Amyop Equipment: Suitable for thin paper printing Availability: August 2026

Condition: excellent (used), Year of construction: 1991, Bergmann SB 600-58 Vertical Baler for Sale Manufacturer: Bergmann Pgjdpfxozntxao Amysp Model: SB 600-58 Year of manufacture: 1991 Machine weight: 810 kg High-quality, German-made Bergmann vertical baler, designed for compacting cardboard, plastic film (LDPE), PET bottles, paper, and other recyclable materials. The machine comes from a recycling facility and features a robust, industrial-grade construction, making it suitable for waste management companies, recycling plants, warehouses, logistics centers, and industrial operations. Specifications Manufacturer: Bergmann Model: SB 600-58 Year: 1991 Machine weight: 810 kg Heavy-duty steel construction Suitable for cardboard, plastic film, paper, PET, and other recyclable materials Condition Used industrial machine. Sold in the condition shown in the photos. Inspection is welcome by appointment.

Year of construction: 2008, condition: good (used), functionality: fully functional, Complete Industrial Recycling Line for Plastic and Non-Ferrous Metal Separation A presentation video is available. A presentation video of the complete recycling line, recorded before dismantling, is available and can be provided to interested buyers upon request. The video shows the complete configuration of the installation prior to disassembly. A complete industrial recycling line, suitable for processing rigid plastics and other recyclable materials, is offered for sale. The installation is in good overall condition, featuring a robust industrial design and high-quality European components. Main components: Feed hopper MEM 46 MG Hammer Mill (Italy) IFE Vibrating Feeder / Vibrating Screen Eddy Current Separator Conveyor belts Electrical control cabinets Steel supporting structure Technical information Hammer Mill Manufacturer: MEM – Società Generale Macchine Edili S.p.A. (Italy) Pedpjznmgqofx Amysgp Model: MEM 46 MG Year of manufacture: 2008 Hammer Mill Weight: approx. 7,080 kg Suitable for processing: Rigid plastics (PVC, PE, PP, ABS, PC, etc.) Plastic profiles Plastic containers Mixed recyclable materials Non-ferrous metal recovery Aluminum separation Advantages: Complete recycling line Heavy-duty industrial construction European manufacturers Robust and reliable equipment Ready for installation Ideal for recycling companies looking to increase processing capacity The line can be inspected by appointment. Additional photos and videos are available upon request.

Condition: new, Year of construction: 2022, functionality: fully functional, NEW/UNUSED Mazak PRC Laser Optics & Parts — For Turbo X510 / MYZ1501 CO2 Laser For sale: a full set of brand new laser optics and spare parts, originally purchased for a Mazak LaserPath Turbo X510 (MYZ1501) CO2 laser cutting machine, year 1990, with Mazak L1 control. The parts were installed on the machine but the machine was never actually put into operation — so everything is essentially unused, zero cutting hours. Included in this lot: - 2x Gas Return Tree (short, YZ, 3kW, LH, FH turbine) — PRC ref. A8930721 - 1x Gas Return Knee (FH-blower end, YZ-O/C end) — PRC ref. B8930213 - 1x Gas Return Knee (FH-motor end, YZ-fold end) — PRC ref. B8930214 - 1x O-ring service kit for MYZ1500 laser - 8x Tygon tubing, anode — PRC ref. A8931164 - 4x Tygon tubing, stinger — PRC ref. A8931165 - 2x Mirror — PRC ref. OP-118 - 1x Rear mirror — PRC ref. OP-126 - 1x Output coupler "D" mode — PRC ref. B8930074 Psdpfxezndy Io Amysgp - 4x Plasma tube, 18mm outboard — PRC ref. B8930123 - 4x Plasma tube, 18mm inboard — PRC ref. B8930124 All parts are genuine PRC Laser Europe stock (original supplier), purchased new and never run. Also available: the complete donor machine (Mazak LaserPath Turbo X510 CO2 laser, MYZ1501, 1990, Mazak L1 control) can be sold as a whole, including electrical panel, control cabinet, and resonator — if a buyer prefers to take the full system rather than parts only. Open to discussing this option on request. Located in Romania. Buyer arranges shipping/pickup, or can inspect in person.