Used Rinser for sale (123)

Condition: ready for operation (used), A complete Krones bottle cleaning and filling line is available. Throughput: 8000bottles/h, carousel pitch: 161mm, carousel diameter: 1800mm, filling valves: 50. This is a complete rinser and filler monoblock for glass and plastic bottles. Documentation available. An on-site inspection is possible. Ljdpfx Aszmh Slelboah

Condition: used, Year of construction: 2001, Overview This Krones rinser-filler-capper block was manufactured in 2001 and consists of a Volumetic filling system combined with a Variojet rinser and a screw-capping machine. The machine is designed for PET multiway bottles (GDB PET-MW) in 1.0 L and 0.5 L formats. The system is equipped with 120 filling valves and 88 rinsing stations. The rinser operates with 2 rinsing channels, currently configured for ClO₂ and fresh water. The machine runs clockwise and achieves a production capacity of up to 32,000 bottles per hour at 1.0 L. The machine will be available from October 2026 and will be exchanged parallel to the installation of the new line.  Ledpfx Aljyluwtsbeah Technical Data - manufacturer: Krones - model: Volumetic (filler) / Variojet (rinser) - year of manufacture: 2001 - filling valves: 120 - rinsing stations: 88 - rinsing channels: 2 (currently ClO₂ and fresh water) - formats: - 1.0 L GDB PET-MW - 0.5 L GDB PET-MW - POC 1810 closures - production capacity: 32,000 bph at 1.0 L - direction of rotation: clockwise - availability: beginning of October 2026

Condition: used, Year of construction: 2006, PET bottling line, 25,000 bph, for sale with the following line components: - PET blow moulder, manufacturer: Krones, type: Contiform, year: 2006 - Rinser-filler-capper block, manufacturer: Krones 60/80/15, year: 2001 - Labelling machine, manufacturer: Krones, type: Contiroll, year: 2001 Lasdjyzft Sepfx Albsh - Shrink tunnel/shrink packer, manufacturer: Krones - Traypacker, manufacturer: Dimac - Palletizer, manufacturer: Kettner, type: Pressant The line has been dismantled and is in storage.

Condition: used, machine/vehicle number: LC426, Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially, the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency. Comprising a range of top-tier components, the Complete Bottling Line KRONES ensures seamless performance, effectively meeting the stringent demands of high-volume production. Main Components Firstly, the KRONES K-131-669 filling monoblock, manufactured in 2016, stands as the centerpiece of the Complete Bottling Line KRONES. Capable of handling a remarkable 20,000 bottles per hour, it is complemented by the 1998 KRONES 472-072 depalletizer and the 2000 Gronemeyer RINSER 8983-400-4. Consequently, this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES. Quality Control of the Used Bottling Line KRONES Maintaining product quality is paramount in any bottling operation. Therefore, the 1999 KRONES CHECKMAT inspector plays a pivotal role in this regard in the Complete Bottling Line KRONES. With advanced functionalities encompassing not only level control but also meticulous label inspection, it ensures that every product meets the desired standards. Furthermore, the 2000 ACI TA20 2 AE bottle dryer guarantees that bottles are impeccably prepared for subsequent labeling and packaging stages, effectively eliminating any potential issues that may arise from moisture. Labeling and Packaging Efficient labeling and packaging are essential components of the KRONES bottling line. Consequently, the 1999 KRONES STARTMATIC K-080-669 excels in these areas. With precise label application capabilities, coupled with the ability to print directly onto glass bottles, it not only streamlines operations but also elevates brand presentation in the Used bottling line KRONES for glass bottles up to 20000 bph. Complementing this is the 1999 SMI SMI/7507 case packer and the 1997 FRANPACK Typ 121971214 pallet wrapper, ensuring that products are securely packaged and ready for distribution. Operational Status and Specifications The KRONES bottling line is in flawless working condition, and meets the demands of modern production environments. With a remarkable throughput of 20,000 bottles per hour, the line promises to enhance operational efficiency while maintaining product quality. Specifically designed for glass containers and primarily catering to beer production, it guarantees precise and consistent fills, ultimately resulting in superior product quality and customer satisfaction. Laodjvgvwmepfx Albeh In summary, the KRONES bottling line represents a sound investment for businesses seeking to optimize their bottling operations. With its robust construction, cutting-edge features, and proven track record, it is poised to deliver exceptional performance and elevate production standards to new heights.

Condition: used, Year of construction: 1998, Overview  This vacuum filler was built in 1998 by Italian manufacturer GAI. In 2024 the machine was fully refurbished and is available immediately.   Technical Details    Effective Capacity: approx. 4,500-5,000 bottles/hour  Machine equipped for the following bottle formats: Bordeaux 75cl (diameter 78mm) - Burgundy 75 - 37.5cl - Magnums  Rinser with 20 clamps, inspected  Filler with 20 taps and vacuum system (new turbine) - taps inspected, new gaskets. New seating springs.  AROL Saturno Capper with 4 heads and vacuum - semi-new jaws in perfect condition - new vacuum pump and circuit  New wine inlet solenoid valve  Plug for feed pump  Machine newly refurbished (solenoid valve, jaws, vacuum turbine, gaskets, vacuum pump)  Electrical supply: 400 Volts / 50 Hz, 3 phases  Dimensions:  Long 380cm x Wide 140cm x High 250cm  Weight: 3500 kg    Lasdpfouch Tmox Alboh

Condition: used, Year of construction: 2013, Overview This KOSME Barifill RFC 50-60-10 VKP rinser - filler - capper block, built in 2013, is designed for the rinsing and filling of glass bottles in beverage production lines. The block combines a 50-station single-channel rinser, a 60-valve glass bottle filler with short-tube VKP filling system and a Zalkin CA9 360 NG rotary capping section in one compact stainless steel machine. With approx. 16,000 bottles/hour on 0.75 L and approx. 20,000 bottles/hour on 0.33 L, the block sits in an attractive mid-range capacity class for water, beer, cider, wine and other glass-bottle applications. Integrated foam cleaning supports hygienic operation; the machine is operated via a touchscreen HMI on an articulated suspension arm and is enclosed in transparent protective safety guarding with safety interlocks. The machine is still installed and under power and underwent extensive maintenance in Q4/2025. Please note: the Zalkin capping heads are not included in the sale price - the capper base machine is included; the 10 capping heads are optionally available. Technical data - Manufacturer: KOSME S.r.l. - Model: Barifill RFC 50-60-10 VKP - Year of manufacture: 2013 - Machine type: rinser - filler - capper block for glass bottles - Filling system: short-tube VKP, 60 filling valves, 113 mm pitch - Rinser: 50 stations, single-channel, 113 mm pitch - Capper: Zalkin CA9 360 NG (2013), 10 capping positions, approx. 22,000 bottles/hour (capping heads not included in the sale price, optionally available) - Capacity: approx. 16,000 bph at 0.75 L / approx. 20,000 bph at 0.33 L - Foam cleaning: integrated - Control: touchscreen HMI on articulated suspension arm - Electrical supply: 400 V, 50 Hz, 17 kW installed power, 38 A - Compressed air: 6 bar, approx. 450 Nl/min - Water: 4 bar, approx. 3.5 m³/h - Machine weight: approx. 10,500 kg Equipment - KOSME Barifill RFC 50-60-10 VKP main machine - 50-station single-channel rinser - 60-valve glass bottle filler, short-tube VKP filling system Lsdpfx Aszi I T Ijlbjah - Integrated foam cleaning - Zalkin CA9 360 NG capper base machine - Touchscreen HMI on articulated suspension arm - Stainless steel machine frame with transparent protective guarding and safety interlocks - Process piping, vacuum / air equipment, stainless steel bottle handling - Layout drawing available - Optionally available (not included in the sale price): Zalkin capping heads Condition Used - installed in an industrial production environment and still under power. The machine underwent extensive maintenance in Q4/2025 and can be visited and inspected in operation on request. Availability From November 2026 (week 45). Location: Germany.

Condition: used, Year of construction: 2026, Overview This Ferrero AV 9/12/1VA automatic triblock, built in 2026, is designed for filling vegetable edible oil into Marasca-type glass bottles. The block combines a 9-clamp air rinsing station, a 12-valve high-vacuum filling station and an AROL EAGLE VA-IES single-head capping station for ROPP 31.5 x 24 mm aluminum screw caps in one compact AISI 304 stainless steel machine with a nominal output of 2,000 bottles/hour (750 ml). The machine is new and unused. Format tooling for four Marasca sizes (250 / 500 / 750 / 1,000 ml), nitrogen injection before capping, a 7-inch Siemens SIMATIC HMI touchscreen in English and remote diagnostics via Ethernet are included - ready for immediate use. Please note: an optional mechanical caps elevator is available on request; it is not included in the sale price. Technical data - Manufacturer: Ferrero (Italy) - Model: AV 9/12/1VA - Year of manufacture: 2026 - Machine type: rinser - filler - capper triblock for glass bottles - Product: vegetable edible oil, ambient filling temperature - Rinsing: 9-clamp air rinsing turret - Filling: 12-valve high-vacuum filling turret - Capping: AROL EAGLE VA-IES single head, ROPP 31.5 x 24 mm aluminum caps - Capacity: 2,000 bottles/hour nominal (750 ml) - Bottle formats: Marasca 250 / 500 / 750 / 1,000 ml (tooling included) - Bottle diameter range: 55 - 110 mm; height range: 180 - 350 mm - Control: 7-inch Siemens SIMATIC HMI touchscreen (English) - Electrical supply: 400 V three-phase, 50 Hz; 8 kW installed power - Compressed air: approx. 435 Nl/min at 6 bar - Construction: AISI 304 stainless steel; CE marking Equipment - Air rinsing station with AISI 304 grippers, EPDM pads and maintenance-free TWIST rotation - High-vacuum filling station in AISI 304 and food-grade materials, steam or chemical sterilizable - Polished AISI 304 product tank with level indicator, height adjustment and tool-free lid - AROL capping station with vibrating cap dispenser, cap level detector and missing-cap detection - Worm screws, star wheels and conveyors for Marasca formats - Nitrogen injection before capping (gas supply by the customer) - Photocells at inlet and outlet, remote diagnostics via Ethernet - Full AISI 304 safety enclosure with LEXAN inspection doors and safety microswitches Condition New - built in 2026. The machine can be viewed and tested in operation on request. Availability Lodpfxezkkp Is Albsah Immediately available. Location: Italy.

Condition: used, Year of construction: 2003, Overview  This rinser-filler-capper bloc was manufactured in 2003 by Kosme. The bloc is designed for filling carbonated and non-carbonated beverages in PET bottles. It includes a rinsing machine with 2 channel and an isobaric filler with integrated capper for plastic screw caps. The machine is currently available promptly, and further information is available upon request. Technical data  - Capacity: - 10,000 bottles per hour - Formats: - 1,0 l PET bottles - 0,5 l PET bottles - 0,33 l PET bottles - Working direction: - Clockwise - Rinsing system: - 36 rinsing nozzles - 2 channel rinser - With stainless steel pipes - Filling system: - Isobaric system - 36 filling valves - Capping system Ledpfx Ajwiy Tvslboah - Manufacturer: Arol - 9 capping heads - With 2 cap chutes, 1 for 28 mm plastic caps, 1 for sport caps - Dimension - Approx. 4.100 x 3.000 x 4.000 mm Scope of Delivery  - Rinser, filler, capper in triblock construction - Vacuum barrier system - Stainless steel CIP cups - Cap feeding system

Condition: like new (used), HEMA Automatic Monoblock – Filler + Capper – ZALKIN – Stainless Steel HEMA / ZALKIN automatic filling and capping monoblock, designed to integrate the dispensing of the product and the subsequent placement and closing of caps into a single machine for industrial packaging lines. The unit combines a HEMA filler with a ZALKIN capping system, synchronizing both operations through a compact rotary configuration. The containers are automatically transported between the different stations, reducing transfers and providing a continuous filling and closing process. Its construction, primarily in stainless steel, complete enclosure, and integrated control panel make it particularly suitable for professional applications in the food and beverage industries. MAIN FEATURES -Filler manufacturer: HEMA -Capper manufacturer: ZALKIN -Type: Automatic monoblock filler + capper -Integrated operations: filling and closing -Industrial rotary configuration -Automatic container feed -Synchronized positioning and transfer -Multiple filling stations/heads -Automatic product dispensing -Automatic cap feed system -Rotary ZALKIN capper -Multiple closing heads -Automatic infeed and outfeed -Control panel with HMI -Construction primarily in stainless steel -Complete enclosure with transparent safety doors -Hygienic design for the food industry -Prepared for continuous industrial operation -Integrable into complete packaging lines PROCESS The containers automatically enter the monoblock and are positioned in the HEMA filling section, where the different stations perform the product dispensing. Once filled, the containers are synchronously transferred to the ZALKIN capper. The caps, previously fed and oriented, are placed on the containers and then closed by the corresponding heads. The finished containers exit continuously to the next stage of the line. It can be integrated with: -Container depalletizers -Rinsers/washers Lasdpfxsynkdzo Albsh -Product feeding systems -Cap feeders and orienters -Conveyors -Weight checkers -Inspection systems -Labelers -Coders -Cartoners -Palletizers APPLICATIONS Particularly suitable for food industries, manufacturers of sauces and condiments, preserves, beverages, and other liquid or semi-liquid products that need to automate filling and closing simultaneously. Compatibility with products, filling volumes, container formats, and cap types will depend on the configuration and tooling currently installed. The combination of HEMA filling technology and ZALKIN capping in a single monoblock provides a compact and automated solution for industrial packaging lines. Machine available for inspection. Additional technical information, formats, capacities, dimensions, additional photographs, or videos can be provided upon request.

Year of construction: 2001, condition: used, Combined rinser and filler for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Output: 24,000 bottles/h A chlorine dioxide dosing unit and a sterile water supply are connected to the rinser. The filler is equipped with a screw capper. The filling quantity is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile system. Additional title: PET bottle sanitising and filling system Capacity: 24000 b/h Laedpfxsx T Ands Albeh Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles Running direction: left -> right Operation / Control: Touch-Panel / Simatic S 7 Material: mainly stainless steel Position: free standing Features: Stainless steel enclosure, plexiglass protective screen opening upwards; 70 rinsing valves on the rinser; 80 filling valves; filling quantity recording via IDM; Alcoa capper 28 mm Bericap; Prominent chlorine dioxide dosing; filtration system for sterile water, mobile liquid nitrogen dosing; pneumatic screw cap feed (approx. 25 m); 2 basements for a total of 3 mesh box pallets with screw caps

Condition: used, machine/vehicle number: LC521, Used bottling line PROCOMAC for still and sparkling water up to 12000 bph We offer a complete bottling line for natural and carbonated mineral water, specifically designed to meet the complex needs of technicians and industry experts. This solution not only handles bottle formats from 0.5 to 2 liters but also produces up to 12,000 bottles per hour, ensuring high reliability and excellent performance.. Ledpjvgu Tyofx Albjah SIPA Blow Molder and Preform Management The SIPA SFR 12 blow molder, manufactured in 2000, initiates the production process. It efficiently manages preforms using a dumper and elevator-orienter. Furthermore, the integrated cooling chiller and four sets of molds allow the machine to produce bottles of various sizes with both precision and flexibility. As a result, it ensures smooth operations throughout the initial production phase. PROCOMAC Monoblock: The Core of the System The PROCOMAC monoblock unifies three critical bottling functions into a single system. First, the PROCOMAC GRIPSTAR 2R rinser cleans bottles thoroughly, preparing them for the filling process. Then, the PROCOMAC FILLSTAR PET filler quickly and accurately fills bottles with natural or carbonated mineral water. Finally, the PROCOMAC 10-head PICK & PLACE capper applies caps securely and efficiently. Moreover, the saturator and CIP (Clean-In-Place) system maintain hygiene standards and streamline maintenance operations. These additional components not only enhance the monoblock’s efficiency but also ensure reliable performance during production. Transport and Packaging Systems The PELACCI P.13.8.5 cap elevator consistently supplies caps to the system without interruptions. In addition, the PE ROLLMATIC CI 540 12T labeler applies labels accurately to bottles of different formats. Subsequently, the ZAMBELLI LFT 50 shrink wrapper quickly packages bottles into bundles, while the COMAG H 55/1 handle applicator attaches handles to bundles for easier transport. Furthermore, the LEVATI ARTIS palletizer organizes bundles onto pallets with precision. Similarly, the ROBOPAC HELIX HS 30 pallet wrapper wraps the load securely to protect it during transportation. Lastly, the EIDOS labeling system prints and applies labels directly on the production line, allowing for full customization, which ensures adaptability to various production requirements. Conveyor Belts for Optimal Flow The conveyor belt system facilitates efficient material flow across the production phases. Specifically, air conveyors move bottles swiftly, while dedicated belts transport bundles and pallets seamlessly between sections of the line. Consequently, these systems maintain a continuous and smooth workflow, which significantly reduces production downtime. Current Status and Availability This Used bottling line PROCOMAC for still and sparkling water up to 12000 bph operates efficiently and will remain in use until April 2025, when it will be dismantled and replaced. Therefore, we encourage interested buyers to view the line in operation before dismantling to evaluate its performance and condition. Ultimately, this complete and integrated solution delivers reliable and high-performing bottling capabilities for industrial water production.

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Ljdpfxjw Tlz Es Albsah Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Condition: used, machine/vehicle number: M348, Used Automatic filling triblock + cap elevatorTechnical Specifications & Performance DataThis Automatic Triblock Rinser-Filler-Capper with Cap Elevator is a compact 3-in-1 monoblock engineered for high-quality glass bottle packaging in industrial environments. Designed around gravity filling, it preserves alcohol content and aromatic profiles for premium spirits and still wines. The triblock integrates a rotary rinser with 9 grippers, a 10-valve gravity filler, and a single-head AROL capping turret, delivering reliable performance within a small footprint—ideal for industrial packaging, beverage production, and integration into a used bottling line or second hand bottling equipment upgrade.Production speed: up to 1,600 bph (at 0.75L)Container type: glass bottlesBottle formats: currently set up for 0.25L; speed reference at 0.75L, 100ML ( Mignon), 187ML (Single-serve size), 1,5L (Low-profile).Bottle diameter range: 55–110 mmBottle height range: 160–320 mmClosure currently: GPI 28/400 (wooden/plastic screw style)Monoblock configuration: 9-gripper single-treatment rinser; 10-valve gravity filler; 1-head AROL capping turretRotation direction: clockwise (left to right)Electrical supply: 380 V, 50 Hz, 3Ph + N + T; auxiliary 24 V DC; IP55Installed power: 7.0 kWPneumatics: 6 bar operating pressure; 200 Nl/min; 1/4" fittingsRinser water pressure: max 3 barProduct connection: DN25 TriclampFilling valve OD: 14 mm; minimum bottle mouth: 18.5 mmConveyor: acetalic (POM) chain, pitch 38.1 mm, width 82.5 mm; support 100x100 mm closed sectionWorking height: 1,000 mm ± 50 mmMachine dimensions (L x W x H): approx. 4000 x 1500 x 2100 mmMachine weight: approx. 3500 kgMaterial construction: AISI 304 stainless steelEquipped with pivoting timing screws, which allow precise centering on the conveyor even for small-diameter bottles (e.g. 100 ml / miniature)Filler: Height adjustment via an adjustable central column (raising and lowering by means of an internal screw). Lsdpozrgqqefx Albsah Filling valves can be adapted or replaced according to the required height range.Rinser: Standard height handling up to approximately 150–180 mm. Capability to process shorter formats using grippers with inverted/reversed jaws.Advanced Automation & Control SystemsThe monoblock features a stainless steel electrical cabinet assembled to EN60439-1, CEI17-13/1, and EN60204-1 standards with fully sealed connectors and flame-retardant cabling. Machine speed is finely adjustable via a front-panel potentiometer. The rinser motor is inverter-controlled (400 V) for smooth operation. Level probes govern an electropneumatic product inlet valve with adjustable opening/closing to prevent hydraulic shock. A PLC-read...

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). Laodpfxsziuazo Albsh The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: used, Year of construction: 2021, operating hours: 400 h, machine/vehicle number: M345, Used SRAML filling monoblock 2400 BPH for glass - Year 2021Technical Specifications & Performance DataThis Sraml Filling Monoblock model I9P10VX is a compact, second hand bottling solution designed for efficient beverage production and industrial packaging applications. Engineered for glass bottle handling, it combines rinsing, filling, and capping in a single, space-saving frame. It is ideal for producers seeking reliable bottling equipment within a used bottling line or as a standalone upgrade to existing packaging machinery.Manufacturer: SramlModel: I9P10VXYear of manufacture: 2021Production speed: up to 2,400 bph at 0.25L; up to 1,500 bph at 0.75LContainer types: Glass bottlesWorked formats: 0.25L, 0.75LRinser: 9 grippers; 1 treatment (rinsing)Filler: 10 valves; fixed nozzlesCapper: 1 head; ROPP aluminum screw caps, 28x15.4mmDimensions (L x W x H): 2792 mm x 1258 mm x 2024 mmWeight: 1800 kgElectrical supply: 400 V, 50 HzInstalled power: 3 kWAdvanced Automation & Control SystemsThe monoblock integrates synchronized rinsing, filling, and capping turrets for stable operation and consistent bottle handling. The filling system with fixed nozzles provides precise, low-turbulence filling suitable for quality-sensitive products. Standard machine protections typical of modern bottling equipment help ensure operator safety and dependable uptime. The CE-marked design underlines compliance with European safety and hygiene directives for beverage production.Production Line Integration CapabilitiesThis unit can operate as a standalone filling monoblock or integrate seamlessly within a broader used bottling line. It is supplied with compatible Sraml ancillary equipment and conveyors for smooth line connectivity and accumulation management. Format changeovers support 0.25L and 0.75L glass bottles, helping producers switch SKUs with minimal downtime.Sraml RT800 rotating tableSraml RM6 rinsing medium unit with pump and heater (powered from the monoblock); 400V; 7 kW; 80 kgSraml BT1.5 bottle tilter; 400V; 1.1 kW; 350 kgSraml PT2000 packing table; 130 kgConveyors to connectMachine Condition & Maintenance HistoryManufactured in 2021, this filling monoblock has been lightly used for approximately three production seasons and records around 400 operating hours. It has been placed in dry storage since August 2024. Overall, it presents as a well-kept second hand machine suitable for rapid recommissioning in beverage production environments.Operational Performance & VersatilityDesigned for glass bottle handling, the system has processed apple juice and, thanks to its configuration, can be adapted to various still beverages. The ROPP capping head supports 28x15.4 mm aluminum screw closures common in premium juice and specialty drink applications. The 9-gripper rinser and 10-valve filler pairing provide balanced throughput a... Lodpjzrgrhofx Albeah

Condition: used, Year of construction: 2022, Linearly aligned can filler with rinser, filler, lid depositor and seamer in one block. Counter-pressure filling is controlled volumetrically. Format changeover for all standard can sizes. Capacity: 2000 cans/h for carbonated drinks Max. oxygen pickup on the filler: 25 ppb Compressed air: IG 1/2", 6-10 bar Laodpfx Asxbn Icelbjh Length: 2774 mm Width: 1100 mm Height: 2000 mm Formats: 12 oz and 16 oz cans, lid type 202 B64, conversion to other formats possible Operation / Control: Siemens Simatic S7 Features: 6 filling stations, 7 inch touchscreen with swivel arm, infeed screw, product buffer tank (3 bar), servo driven seamer, tunnel for can rinsing after filling, motors by SEW

Condition: used, Year of construction: 2018, Overview This complete can filling line was manufactured by COMAC and is designed for the filling of carbonated beer in aluminium cans. The line has a nominal output of 5,500 cans/hour for 44 cl cans and 6,000 cans/hour for 33 cl cans. The core machine is a COMAC ISO 14-2 filling and seaming monoblock with 14 electro-pneumatic isobaric filling valves and 2 seaming heads. The filling monoblock includes CO₂ flushing before filling, product tank pressure control, “no can – no fill” function, automatic height adjustment for different can sizes and CIP dummy cans suitable for acid and caustic cleaning up to 80°C. The self-adhesive labeller handles a maximum label length of 210 mm and a maximum label height of 80 / 160 mm at up to 6,500 cans/hour. The dry rinsing system uses approx. 0.25 Nl of ionized air per can, with a treatment time of approx. 3 seconds. Technical data - Line type: Complete can filling line - Manufacturer: COMAC - Year of manufacture: 2018 - Product: Carbonated beer - Nominal output: 6,000 cans/hour (33 cl); 5,500 cans/hour (44 cl) - Filling temperature: 2–4°C - CO₂ content: max. 5.5 g/L - Container type: Two-piece cans with SOT - Can formats: 330 ml and 440 ml - Can diameter: 66 mm - Can end: 202 - Product pressure: 3–4 bar - Water pressure: 3–4 bar - Air pressure: 6 bar - CO₂ pressure: 6–8 bar - Electrical supply: 3x400 V + N + T, 50/60 Hz - Auxiliary voltage: 24 V Scope of Delivery - Can Depalletizer | COMAC | For pallet size 1,120 x 1,300 mm; incl. empty can buffer table and platform | 2018 - Dual Channel Can Rinser | COMAC | Ionized Air Rinser | HEPA filtration, ionized air cleaning, 2-channel design | 2018 - Self-Adhesive Labeller | COMAC | Wrap-around labelling for empty cans; 6-plate carousel | 2018 - Filling / Seaming Monoblock | COMAC | ISO 14-2 | 14 isobaric filling valves / 2 seaming heads | 2019 - Double Shower | COMAC | Washing device after level control | 2018 Ljdpfxezktw Us Albeah - Beer Pump | COMAC | Centrifugal beer pump with frequency converter and pressure control | 2018 - Level / Lid Inspection | FT System | HS600-ST+CL003-RX+CT001-SE+ZT | X-ray level control / inspection system | 2019 - Can Twister 1 | COMAC | 180° can inversion before coding | 2018 - Can Dryer | BRB Globus | MEGA ADE 611 CW | 2019 - Ink Jet Coder | COMAC | Continuous inkjet coder, up to 162.5 m/min | 2018 - Can Twister 2 | COMAC | Return cans to upright position | 2018 - Carton closing system | SOCO System | T-10 | 2012 - Can / Case Conveyor System | COMAC | Conveyor system according to layout | 2018 - Conveyor Canopy | COMAC | Stainless steel canopy above empty can conveyors | 2018 - Change Parts | COMAC | – | Format parts for 33 cl cans and 44 cl cans incl. spouts, twisters and labeller parts | 2018 - Technical Documentation | COMAC | Documentation in English, paper copy and CD-ROM | 2018 Condition Used line – built in 2018, currently still installed. The line can be viewed on request. Availability Immediately available. Location: United Kingdom.

Condition: used, Year of construction: 2001, PET single-use filling line for water, soft drinks and fruit spritzers. Bottle formats: 0.5 L, 1.0 L, 1.5 L Nominal output: 24,000 bottles/hour (with 1.0 L) The new bottles are destacked on pallets at the new bottle unstacker and transported pneumatically to the rinser. The system consists of: - Markant 1ASH-PL new bottle unstacker Manufacturer: KHS Year of manufacture: 2001 - Pneumatic bottle transport Manufacturer: KHS Year of manufacture: 2001 - Premix system Intermix 240 EIÜD Manufacturer: Ortmann & Herbst Year of manufacture: 1978 with downstream Velcorin dosing - PET rinser: Innoclean FR-ZR 70/113, 1 B/RL Manufacturer: KHS Year of manufacture: 2001 With chlorine dioxide and sterile water rinsing - PET filler Innofill DRV-VF-PET Manufacturer: KHS Year of manufacture: 2001 With Alcoa screw capper and liquid nitrogen dosing - Fill level control Manufacturer: miho Year of manufacture: 1992 - Container transport Manufacturer: KHS Year of manufacture: 2001 - Labelling machine for wrap-around labels Manufacturer: KHS Year of manufacture: 2003 With hot melt glue melter and best-before date printer Lajdpfjxhd Apox Alboh Features: New glass removal system; pneumatic bottle transport; premix; rinser/filler/capper; fill level control; container transport; labelling machine

Condition: excellent (used), Year of construction: 2015, KHS INNOFILL DVD 40 CAN FILLING LINE MAX SPEED: 34,000 CPH 330ML IN 24 PACK WRAPAROUND CARTON CURRENT SPEED: 24,000- 28,000 CPH IN SMALL WRAPAROUND CARTON 4/6/8/10/12 PACKS LOCATION: UK STANDARD CAN 330ML & 440ML LID 202 SLEEK CHANGEPARTS FOR FILLING BLOC AVAILABLE GPI PACKER ADDED IN 2018 ROBOPAC PACKER ADDED IN 2022 EQUIPMENT LIST: FIPAL MINIDEPAL 20 LA DEPALLETISER • TWIN LANE RINSER • KHS INNOFILL CAN DVD 40 FILLING BLOC 34,000 CPH • FERRUM F6 6 HEAD SEAMER • CSW DEVENTER LID FEED SYSTEM • HEUFT SPECTRUM TX • EURO SISTEMI CAN DRYERS • TELEDYNE TAPTONE INSPECTION • ROBOPAC PRASMATIC TC400 COMPACT CASE PACKER • FT SYSTEM CP600 TP TUR300 Z200 RAS001 • GPI QUICKFLEX 300 MULTI-PACKER • HITACHI INK JET PRINTER • PACKITAL LANER • COMPLETE CONVEYOR SYSTEM • FIPAL PAL 80 F PALLETISER • ATLANTA STRETCH REVOLUTION LS STRETCH WRAPPER LOCATION: UK VIEWINGS BY APPOINTMENT WELCOME. Lodpstraaajfx Albjah PLEASE GET IN TOUCH TO ARRANGE AN INSPECTION. INDASSOL.COM

Condition: used, Year of construction: 1999, Overview  The Sensometic vacuum filler was built by Krones in 1999. The offer also includes rinser, Alcoa cappers and a blocked labeler. The machines can be inspected at any time.   Technical details  Output  12,000 bottles/h with 0.7l glass bottle  10,000 bottles/h with 1.0l glass bottle  6,000 bottles/h with 1.5l PET bottle  Formats  0.7l glass bottle  1.0l glass bottle  1.5l PET bottle  Plastic closure  Screw cap 28 mm  Push-on cap  Label  Body, back, neck loop, neck ring  Bottling product  Raspberry and various fruit syrups   Special hesperide vinegar   Filling temperature: 25°C   Running direction: L-R   Siemens S5   Scope of delivery  Rinser | Krones | Variojet | 3-channel rinser; steam, sterile water, air  Vacuum filler | Krones | Sensometic |   Capper | Alcoa | PP 10 / 360   Capper | Alcoa | K 10 / 360  Cold glue labeler | Krones | Prontomatic   Lasdpfxoukkvns Alboh

Condition: used, machine/vehicle number: LC682, Used AVE 16-16-4 filling line, still & sparkling water - 2 PET blowerTechnical Specifications & Performance DataThis used bottling line is configured for beverage production in 0.33L, 0.5L and 1.5L bottle formats. The AVE filling line, manufactured in 2008, is designed for spring water and flavored water. Its stated capacity reaches 6,000 bph for 0.5L bottles and 2,500 bph for 1.5L bottles.Production capacity: 6,000 bph for 0.5L bottlesProduction capacity: 2,500 bph for 1.5L bottlesCompatible formats: 0.33L, 0.5L and 1.5LFilling monoblock configuration: 16/16/4 rinser, filler and capperCap specification: 28mm plastic screw cap, PCO 1881 neck finishSMF Combi 200 blow molding machine: 2003, 700 kg, 3 x 380 V, 28 kW, 50 HzSMF Combi 400 blow molding machine: 2016Advanced Automation & Control SystemsThe line combines bottle forming, conveying, filling, capping, labeling and shrink wrapping equipment for coordinated industrial packaging operations. The SMF Combi 200 blow molding machine operates on 3 x 380 V electrical supply at 50 Hz and has an installed power of 28 kW. Bottle lifters on the filler support stable container handling through the filling process.The included POSIMAT bottle handling system, manufactured in 1992, places 0.5L bottles onto the conveyor belt. Conveyor belts are included to provide material flow between the available equipment.Production Line Integration CapabilitiesThis second hand used bottling line supports PET bottle blowing and beverage bottling, while the AVE filler is also able to fill glass bottles. The process layout includes blow molding equipment, bottle orientation and conveying, a rinser-filler-capper triblock, labeling and shrink-film secondary packaging.Machine typeManufacturer / modelYearBlow Molding MachineSMF Combi 2002003Blow Molding MachineSMF Combi 4002016Various EquipmentPOSIMAT bottle placement system1992Filling MonoblockAVE 16/16/42008Labeling MachineAVE2008Shrink WrapperAVE2008Various EquipmentConveyor beltsThe AVE labeling machine handles paper, hot-applied and cut labels. T... Lasdpfx Aljz E Dd Sebeh

Condition: used, Year of construction: 2013, machine/vehicle number: M313, Used MESAL filling triblock - 18000 BPMTechnical Specifications & Performance DataThis MESAL filling monoblock is a tri-block configuration that integrates rinsing, filling, and capping on a single compact rotary platform. Engineered for PET bottle handling and designed for still beverages such as juice and tea, it delivers reliable performance and consistent product quality for industrial packaging and beverage production. With automatic operation, weight (gravimetric) filling, and a robust rotary carousel design, this unit is suitable for scaling a used bottling line or expanding second hand beverage production capacity with modern automation.Manufacturer: MESALModel: E50-60-15GA1Year: 2013Production speed: up to 18,000 bottles/hourConfiguration: Rinser/Filler/Capper tri-blockFiller valves: 60Rinser grippers: 50Capper heads: 15Container type: PETBase format: 0.38L (380 ml)Neck finish: 38 mmFill principle: Weight (gravimetric)Operating type: AutomaticElectrical: 400 V, 60 HzControl system: Omron PLC/HMIApproximate weight: 8,000 kgAdvanced Automation & Control SystemsThe machine is equipped with an Omron PLC-based control system and touch HMI for efficient operation, diagnostics, and format adjustments. Automated bottle handling across the rinser, filler, and capper ensures smooth transfer between turrets, with synchronized motion and recipe-driven settings to minimize changeover times. Electrical specifications are configured for industrial environments, and integrated safety interlocks support protected access during operation.Omron PLC with modular I/O and clear status indicatorsTouchscreen HMI for parameter management and alarmsAutomatic operation with synchronized turretsDesigned for stable weight-based filling accuracyElectrical supply: 400 V, 60 HzProduction Line Integration CapabilitiesThis filling monoblock integrates seamlessly into a complete beverage production line. Infeed and discharge are designed for PET bottle conveyors, with intermediate transfers between the rinser, filler, and capper to maintain continuous flow. The platform is well-suited for industrial packaging lines requiring efficient rinsing, precise filling, and reliable capping in a compact footprint.Inline integration with standard bottle conveyorsRinser/Filler/Capper tri-block layout for reduced floor spaceSuitable for still beverages: juice and teaDesigned for PET bottles with 38 mm neckBase format 0.38L; additional formats can be supported with change partsMachine Condition & Maintenance HistoryThe machine is currently in storage. From a commercial perspective, this status typically enables inspection and testing prior to commissioning. The mechanical and... Laedsyhbgaspfx Albsh

Condition: used, Year of construction: 1997, machine/vehicle number: M304, Krones PET Block 54/8 Monobloc Filler–Capper – OverviewThe Krones PET Block 54/8 is a second‑hand monobloc composed of a rotary isobaric filler and rotary screw capper for PET bottles. Engineered for beverage production and industrial packaging, this unit is ideal for integrating into a used bottling line requiring counter‑pressure filling and PCO 1881 closure application. With 54 fixed filling valves and an 8‑head capper, it delivers reliable performance on large PET formats with precise neck handling.Technical Specifications & Performance DataConfiguration: Monobloc Filler–Capper (filler + capper; no rinser module)Filling technology: Isobaric, fixed-valve counter‑pressureNumber of filling valves: 54Valve pitch (center distance): 126 mmCapper: 8-head rotary screw capper for plastic closuresNeck finish: PCO 1881 (short finish) – plastic screw capsBottle materials: PETNominal capacities: 1.5 L = 9,000–10,000 bph; 3.0 L = 7,000–8,000 bphMachine rotation: ClockwiseOverall dimensions: L 3.8 m, W 3.2 m, H 2.65 mApprox. weight: 7,500 kgReference: M304Module DetailsFiller carousel: 54 valves, designed for carbonated beverages and counter‑pressure operation; suitable for still beverages with inerting depending on product setup.Capper turret: 8 capping heads optimized for PCO 1881 plastic screw caps; consistent application torque and bottle neck handling for PET containers.Advanced Automation & Control SystemsPLC platform: Siemens S7 for process control, diagnostics and integration.Signal and I/O: Provision for standard digital signals to synchronize with upstream/downstream equipment on a used bottling line.Process control: Counter‑pressure phases managed via PLC for stable fill levels and CO₂ retention.Production Line Integration CapabilitiesLine compatibility: Ideal for beverage production environments seeking to upgrade or expand a second hand industrial packaging line.Upstream equipment: Can interface with external bottle rinsers or blow molding machines (not included).Downstream equipment: Compatible with conveyors, labellers, packers and palletizers.Handling system: PET neck handling for stable transfer between filler and capper.Machine Condition & Maintenance HistoryStatus: In storage; filler dismantled and stored.Operating readiness: Operating after scheduled service/maintenance.Power: Not connected.Operating hours: Not set.Typical availability: Unit can be prepared for dispatch after service with a standard lead time.Operational Performance & VersatilityProcess benefits: Isobaric fixed-valve design supports low-foam filling, minimized oxygen pickup and consistent fill volumes on large PET formats.Format range: Optimized for 1.5 L and 3.0 L bottles; additional formats possible subject to parts and changeover kits.Closure system: Reliable application of PCO 1881 screw caps for CSD, sparkling water and other carbonated beverages.Installati... Laedpeyhcgbsfx Albjh

Condition: used, Year of construction: 2024, machine/vehicle number: LC649, Used Complete Bottling line for vine - glass - 10.000 BPHTechnical Specifications & Performance DataThis complete used bottling line is engineered for high-quality wine production and industrial packaging applications. Centered around a Sympak Master Tronic 40/48/8-8 platform from 2005, it integrates depalletizing, rinsing, isobaric filling, capsuling, wirehooding, labeling, case handling, palletizing, and end-of-line printing. The system is optimized for glass bottles and includes microfiltration for beverage production quality assurance.Manufacturer: Sympak Bottling & Canning S.p.A.Main platform model: Master Tronic 40/48/8-8Manufacturing year: 2005Container types: Designed for Glass bottle handlingProduct types: Ideal for Wine production applications (still and sparkling)Filling principle: IsobaricFiller capacity: up to 16,000 bphCapsuling capacity: up to 7,200 bphLabeling capacity: up to 5,200 bphElectrical supply: 380 V, 50 HzInstalled power (main monoblock): 33 kWOperating pressure: up to 7 barTemperature limits: TS min 5 °C; TS max +85 °CStandards: CE marked; EN 60204-compliant control rulesAdvanced Automation & Control SystemsThe line incorporates industrial automation for coordinated operation across depalletizing, bottle preparation, filling, and end-of-line packaging. Safety interlocks, guarding, and emergency stop circuits are built in according to CE and EN 60204 electrical safety rules. The isobaric filling environment is pressure-rated for beverage production, supporting stable filling performance and product integrity.Production Line Integration CapabilitiesInfeed depalletizing, conveyors, bottle washer/rinser/dryer, isobaric filler, capsuling and wirehooding stations, labeling, coding, case forming/packing/sealing, palletizing, and stretch wrapping are harmonized for inline operation. The equipment mix supports traditional cork and synthetic closures and integrates microfiltration for quality control. Typical wine bottle sizes and formats can be accommodated through format changeovers as defined by the installed components. The overall line throughput is typically balanced by labeling and capsuling stages, with nominal outputs up to approximately 5,200 bph depending on product and format.Machine Condition & Maintenance HistoryThe line is presented in ready-for-operation working condition, with components noted as reconditioned in Italy. Routine service and reconditioning practices have been applied to ensure reliable performance across the integrated stations. The system reflects professional upkeep, maintaining production quality for industrial bottling and beverage production.Operational Performance & VersatilityDesigned for wine bottling, the isobaric filling configuration combined with dedicated capsuling and wirehooding enables both still and sparkling applications. The inclusion of a Win & Tech microfiltration unit enhances p... Lsdpfxjzd Ucxj Albeah

Condition: used, Year of construction: 2011, machine/vehicle number: M337, Used RAVECCO MORAVEC filling triblock 12-12-1C for waterTechnical Specifications & Performance DataThis second hand Filling Monoblock by Raveco Moravec combines rinsing, filling, and capping in a compact rotary platform designed for efficient beverage production and industrial packaging. Engineered for glass bottles, it is a reliable choice for a used bottling line seeking flexible closure options and straightforward integration.Manufacturer: Raveco MoravecModel: 12-12-1C MonoblockSpeed: 2.500 BPH ( Bottle per hour)Configuration: 12 rinsing grippers, 12 filling valves, 1 capping headContainer types: Glass bottlesBottle formats: Compatible with 0.33L, 0.5L, 0.75L, 1.0L bottle formatsNeck finish: Long neckClosures: crown capsConstruction year range: 2009–2011Machine type: Rinser–Filler–Capper monoblockAdvanced Automation & Control SystemsThe machine utilizes a Moravec control platform with manual operation, providing straightforward and dependable control for operators. Core functions for rinsing, filling, and capping are synchronized within the monoblock to maintain consistent bottle handling and process timing. Operator access is designed for quick intervention and basic parameter adjustments, supporting reliable changeovers between closure types.Moravec control system with manual operationSynchronized monoblock timing for rinse–fill–cap sequenceOperator-friendly controls for format adjustmentsStandard emergency stop and interlocked guarding typical of industrial packaging machineryProduction Line Integration CapabilitiesThis Filling Monoblock is configured for a straight-line conveyor layout, enabling smooth integration within a used bottling line or operation as a standalone module. It accepts a range of glass bottle formats and supports quick format and closure changeovers, making it suitable for flexible beverage production environments.Inline integration on straight conveyor layoutsStandalone or in-line operation within broader bottling equipmentFormat flexibility from 0.33L to 1.0L glass bottlesChangeover capability crown closuresMachine Condition & Maintenance HistoryThe equipment is currently in occasional operation and has been in service approximately 25 hours per week during recent use, with remaining time on standby. It has been serviced regularly over the past year of ownership. Testing is available, including both dry run and production tests, to verify operational performance before integration into a second hand production line.Operational status: Occasional operationTesting availability: Dry run and production test possibleService status: Regularly serviced during recent useDocumentation: Technical manuals and schematics not on handSpare parts: Not includedOperational Performance & VersatilityDesigned for glass bottles with a long-neck fi... Lasdpsy Uvhmjfx Alboh