Used Unscrambler for sale (38)

Condition: good (used), Year of construction: 1991, PET bottle placer 0.5 L Hfedpsxnkyusfx Afisn including infeed/outfeed conveyor

Condition: new, Year of construction: 2025, Automatic feeding system for cans, glasses, bottles. Separation of single containers and automatic orientation to the conveyor of filling station. - Specifications: Speed: up to 80 containers/min; diameter of table: 1.000mm; 380V, 0,18kW; machine weight: 50kg; dimensions: L1400xW1200xH1200mm. Hjdpfx Aev Nk Hhsfiofn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2018, Unscrambler from 2018, 8-10,000 bottles per hour, fully functional, for round bottles in PET or HDPE Hedjwgvxpepfx Afisfn

Year of construction: 1995, condition: good (used), functionality: fully functional, For sale is a bottle erecting machine made by Engler including a stainless steel bottle bunker. There are also various format parts and a blower. The machine is currently not in use and can be viewed by arrangement at the production site in Thuringia. Hfodpotmqafjfx Afisn Formats: 300ml, 400ml, 500ml, 875ml for PE or PET bottles. Diameter: 2.10m; Outlet height: approx. 0.98m; Bunker height: 1.12m to 1.75m

Condition: used, functionality: fully functional, Year of construction: 2020, Separation conveyor 2 pieces identical Hfjdsvtm Dqepfx Afion

Condition: new, Year of construction: 2025, This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 20-80mm; bottle height: max. 120mm; sorting speed: max. 100 bottles/min; compressed air: 5bar; power: 220V, 0.6kW; machine dimensions: L950xW950xH1000mm. Optional: different unscramble trays for different bottle sizes. Hfodpsv Nk Hnofx Afisn That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, This bottle unscrambler sorts round plastic bottles automatically and places on a conveyor at speed s of up to 100 pcs/min. Stable operation at low noise. - Specifications: bottle diameter: 45-90mm; bottle height: 75-240mm; sorting speed: max. 100 bottles/min; machine stops automatically when the bottles are jammed due to photocell; MITSUBISHI PLC, WEVIEW touchscreen, OPTEX photocell, SCHNEIDER frequency converter; Frame of stainless steel (SS304); compressed air: 6-8bar; power: 220V, 2kW; machine dimensions: L2600xW1500xH1500mm. Optional: different unscramble trays for different bottle sizes. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Hfedpfx Afov Nk Hujion Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 1995, condition: excellent (used), functionality: fully functional, Stacking machine by Hanses, heavy-duty design Consisting of: Hfedpfxjxnyt Re Afijn Cross conveyor, unscrambler, alignment roller conveyor, layer forming section, clamp, 2 cross-cut saws (one adjustable). Forks, lifting platform. Without slat magazine. The entire system is bolted, making it easy to disassemble and assemble. Lengths from 2.5 to 5.0 m.

Condition: used, Year of construction: 2003, total length: 1,500 mm, total height: 1,400 mm, Applicable material: Food Year : 2003 Type: hot or cold product filling line for pots and bottles Application : Suitable for viscous products such as creams in the cosmetics / pharmaceutical or other industries   Type: Automatic linear filler Manufacturer: Tirelli Model : CHICO 2P Year : 2003 Number of heads : 4 units Volumetric filling technology with 2 metering pistons Jacketed 25 L hopper + piping Temperature controller Pneumatic bottle-lock centring device PLC controls and configuration Linear conveyor with pallet chain SISE 95E6E 13 DC60 temperature controller (3.5 KW / 90°C / Water) – Year 2014   Type : Automatic capping machine with star wheel Type of cap: screw cap Manufacturer: Tirelli Model : RO Year : 2003 Automatic cap feeder : vibrating bowl + giraffe conveyor Presence / jamming / dispensing sensors Pick and place   Type: Automatic jar / bottle unscrambler Manufacturer: Romaco Bosspack Model: MS150 Year : 2003 Output : up to 150 jars / min Product dimensions : Diameter: 30 mm min / 100 mm max Hfodpfevlzq Nsx Afisn Height : 50 mm min / 200 mm max Width: 30 mm min / 100 mm max Length: 30 mm min / 100 mm max Machine dimensions : Length: 150 cm Depth: 340 cm Height: 140 cm

Condition: excellent (used), Collective lot comprising of: - Fillber Monoblock RVOL.TVP 32-8 OMS Filler/Capping System (With Cap Changeover) With Siemens PLC - Posimat Master-15 bottle Unscrambler, SMF Dumper DRH 310 With Posimat Loading Elevator - SMIPACK XP650 ARX-VS Overlap Shrink Wrapping Machine with FLXMOD Control System Hfodpfx Afjxnc Epjijn - Epackaging Saturno 1T High Speed Labelling System - ASMECH BESPOKE CONVEYOR SYSTEM With Travelator & Bottle Sorting Unit

Condition: ready for operation (used), Logintake with butt end reducer and debarker. Below parts included: - Log deck with log unscrambler and log singulator - Butt-end reducer type Bruks RR1000 Hfsdpfx Aotrd Hfjfien - Debarker type cambio 70-66 - Out-feed log conveyor with logkicker

Condition: used, Year of construction: 1995, SIDEL SBO10- blowing machine SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity. As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper. After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine: which consists of: 1. Preform infeed rails 2. Preform infeed wheel 3. Infrared oven 4. Preform transfer wheel 5. Blow wheel 6. Bottle transfer wheel 7. Bottle evacuation GENERAL Presentation 1. Infeed of cold preforms Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowered by gravity. 2. Preform heating linear oven The preforms, grasped in the spindles at the neck, are turned 180 degrees so that they are head down and are made to rotate as they pass in front of infrared lamps. The linear oven has 10 heating modules. Each oven module has 8 infrared lamps. Ath oven exit, an infrared camera reads the preform temperature so as the automatic regulation of all the areas coming under its control. 3. Hot preform transfer wheel A transfer wheel with 6 arms conveys the hot preforms through the blowing moulds when they leave the oven. 4. Preform ejection An ejection system is mounted after the preform transfer wheel, in case of a non correct temperature of a preform. 5. Blow wheel Preforms are put in the mould for which opening and closing are assured by a system of connecting rods operated by a cam. The mould is locked by a mechanical device. Blow nozzle guides the stretching rod, which ensures longitudinal orientation. A set of cameras synchronizes the whole process. The moulds are controlled for temperature by chilled water circulation. 6. Bottle transfer wheel A transfer wheel with 6 arms picks up the bottles in the moulds to evacuate them from the blowing wheel. 7. Bottle ejection An ejection system is mounted after the bottle transfer wheel. It is completed by a set of photocells. If the bottle is not correct, it is ejected. 8. Bottle outfeed wheel. An outfeed wheel with 8 notches receives the bottles comes from the transfer arms and puts them down on a belt. They are held by guides. The bottle outfeed can be linked to a conveyor system. - Hoisting and tipping unit (1996) - Hopper (1995) - Elevator (1995) - Orienting rollers (1995) - Unscrambler (1995) - Gravity rails (1995) - linear oven (1995) - Blow wheel with 10 moulds (1995) - Bottle outfeed wheel (1995) - Operator control panel (1995) - Electrical cabinets (1995) 12. Chiller (1998) Energy and fluid consumption 1. Electricity Max supplied power: 216kW Average consumption: 120 to 160 kW/h according to item Voltage: 380 (3phase) Hedpexlm Nyjfx Afiefn Frequency: 50/60 Hz 2. Compressed air Supplied power: from 7 to 35 bar Control air pressure: 7 bar flow: 60 to 125 Nm3/h according to item Air quality: dry air, deoiled and filtered to 0,1 ppm Spherical base pressure: up to 25bar flow: 170 to 830 Nm3/h Free standing base pressure: up to 35 bars flow: 235 to 1.100 Nm3/h 3. Chilled water temperature: 10 to 12 celsium degrees pressure: 5 to 6 bars flow: up to 9 m3/h calories to be removed: up to 22.000 Kcal/hour Max supplied power: 216kW Voltage: 380 (3phas...

Condition: used, Year of construction: 2008, Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability Hfedpfx Aovgufijfien 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let’s explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Rotary Blow Molding Machine 2008 is manufactured by Sipa, a reputable company known for its innovative solutions in the packaging industry. This machine, specifically the SFR8 model, was introduced in 2008 and has gained recognition for its exceptional performance. 3. Features and Specifications The Used revised Sipa Rotary Blow Molding SFR8 comes with a range of features and specifications that make it stand out in the market: Year: 2008 Manufacturer: Sipa Model: SFR8 Speed: 12000 BPH (Bottles Per Hour) Containers: PET (Polyethylene Terephthalate) Formats: 0.50 L Additional details of the machine include: No. of cavities: 8 Preform loader: Yes Preforms tipper: Yes Preforms unscrambler: Yes Compressor: Not stated Chiller: No Preform neck type: 1810 Air recovery system: Yes Type: Rotary 4. Benefits of the Used revised Sipa Rotary Blow Molding SFR8 Investing in the Used revised Sipa Rotary Blow Molding offers several advantages: Efficiency: With a speed of 12000 BPH, the machine ensures high productivity and optimized production cycles. Precision: The SFR8 provides precise molding capabilities, resulting in consistent and high-quality bottles. Versatility: It accommodates PET containers and supports the format of 0.50 L, making it suitable for various industries and applications. Reliability: Sipa is known for its durable and reliable machines, minimizing downtime and maintenance costs. Innovative Features: The machine incorporates advanced features such as preform loaders, tippers, unscramblers, and an air recovery system for enhanced efficiency.

Condition: used, Bottling line with a capacity of 30,000 bph. 0.33 litre Vichy, 0.33 litre Euro and 0.5 litre NRW non-returnable bottles can be used. The line consists of the following machines/components: - New glass unscrambler Manufacturer: Steinle Fördertechnik - Beer preheater Manufacturer: Fischer - Bottle filler Manufacturer: Krones - Crown cork filling hopper with transport Manufacturer: Gassner - Bottle level control Manufacturer: Metec - Labeller Manufacturer: Krones/Renner - Labelling control Manufacturer: Miho - Bottle carrier labeller Manufacturer: DOKU-Consult Capacity: 30000 bottles/h Formats: 0,33l Vichy, 0,33l Euro and 0,5l NRW Hfodpow Tmhasfx Afijn Operation / Control: mainly Siemens S7 Position: free standing Features: New glass clearer; beer preheater; bottle filler; crown cap filling bunker with magnetic transport; bottle level control; labeler; label control; packer; full crate control; palletizing system Layer patterns: 4x8 boxes, 5 layers, on Euro pallet

Condition: new, Year of construction: 2025, Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops. The system includes an container unscrambler, which sets the small bottles into an infeed line. Module to clean the bottles (water/gas) and inside/outside tucks (cap parts), filling and labelling the bottles. The system is PLC controlled. The total 3 cleaning processes with water plus the 3 cleaning processes with gas assures a very high cleaning standard without any water remaining. All liquid touching parts are made of stainless steel SS316 completely. - Specifications: Filling precision: < +/- 0.5%; max. speed of the machine in neutral: 120 bottles/minute; filling capacity: 5-30ml; 380V, 3.8kW; 6bar. All these specifications only are sample specifications. Depending on the final working process they will vary. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Hodpsv Nlbtofx Afiofn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2008, Used Combiblock Sidel SBO 20 Universal 36000 bph The Used Sidel SBO 20 Universal Combiblock 36000 bph is an integrated bottling system, combining a blower and a filler/capper in a single unit. This machine is designed for the production of PET bottles, with a production capacity of up to 36,000 bottles per hour. The Sidel SBO 20 Universal blower features 20 cavities, allowing efficient and continuous production. The system includes a preform feeder with a hopper and a preform unscrambler, ensuring a constant flow of material in the production process. The Europa WM 60 filler/capper is integrated into the Combi block, optimizing space and reducing transfer times between the blowing and filling stages. This compact design improves operational efficiency and minimizes the risk of contamination. The system has been used for bottling natural mineral water in 0.5-liter formats, with a 26.6 mm Alaska-type neck customization. The machine pitch is 113 mm, adapting to specific production needs. Hedpfxsvgu D Sj Afijfn Currently, the machine is in storage, ready to be installed and put into operation in a new production facility. A complete inspection is recommended before start-up to ensure optimal performance. The required power supply is 400 V at 50 Hz, standard in many industrial plants. The immediate availability of the Combi system represents an opportunity for companies looking to quickly increase their production capacity.   Advantages of the Combi system over a traditional system The Combi system, like the Used Sidel SBO 20 Universal Combiblock 36000 bph, offers numerous advantages over traditional systems, which use separate machines for blowing, filling, and capping. Firstly, the compact design drastically reduces the space occupied in the plant, allowing companies to optimize available space and, in many cases, reduce infrastructure costs. Moreover, the Combi system eliminates the need for intermediate conveyors and accumulation zones between stages. This layout simplification reduces maintenance costs, lowers the risk of jams or breakdowns along the production flow, and improves the overall line efficiency. The absence of intermediate steps also reduces the possibility of contamination, a priority especially in the food and beverage sector. The integrated process between blowing, filling, and capping shortens production times as the operations proceed continuously and without interruptions. This contributes to increasing the overall line speed and hourly production capacity. Higher efficiency translates not only into increased productivity but also into a significant reduction in energy consumption and operating costs. Additionally, the Combi system requires fewer personnel for line management and supervision, as a single control unit allows all operations to be monitored from a centralized interface. This simplifies operational procedures and makes quality control easier throughout the process.

Condition: new, Year of construction: 2025, Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler; Filling machine with 4 filling heads for liquids with high or low viscosity; Lid closing machine for different sizes and shapes of lids including lid unscrambler; Labelling machine for bottles/cans/containers made of glass or plastic; Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4; filling range: 100-1000ml; dosing method: by piston pump; accuracy: +/- 1%; bottle height: 15-400mm; bottle diameter: 25-200mm; speed: max. 1000 bottles/hour; label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. The machine photo just shows the 4-head filling machine. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hodpfx Afsv Nlbajisfn

Condition: used, Year of construction: 2003, operating hours: 19,500 h, Used Blow Molding Machine Sidel SBO 2003 We have a Used Blow Molding Machine available for purchase, the Sidel SBO 2003, with the reference. The machine was manufactured by Sidel in 2003 and has a model of SBO 12. It has a speed of 17000 BPH and is suitable for creating PET containers. Hfodpfx Afovr S Tnsien This particular machine has 12 cavities and comes equipped with a preform loader, preform tipper, and preform unscrambler. It also has an air recovery system and is a rotary type. The preform neck types it supports are 1881 and 2925 neck. The machine is currently in a ready state for operation and has safety features installed. It also comes with manuals and has been in operation for 19500 machine hours. If you’re interested in purchasing this machine, please let us know.

Condition: new, Year of construction: 2025, Sample filling system for low viscosity products (ketchup, jam, sauces, etc.) into bottles, glasses, cans. Including container unscrambler, rolling bottle/container rinser, viscosity filler (hot filling, steam filling), vacuumize jar capper. - Specifications: filling volume 20-1000ml; bottle size range: diameter 20-150mm, cap diameter: 20-70mm; 4-12 filling nozzles allowing speed s of up to 6000 bottles/containers per hour; tolerance of filling quantity: +/- 1%; yield of capping: < 99%; 380V, 3.5kW, 0.6m³, 6bar. - Please note: These are specifications for a sample system only. The final specifications will vary. Please give us your packaging details (container size, shape, filling product, required speed , etc.) to prepare a full quotation for you. Hedpfov Nlbmsx Afiefn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2005, Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph The Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph efficiently delivers continuous production in the bottling sector. Manufactured in 2005, this machine currently operates and, importantly, remains available for on-site inspection until March 2025. Technical Features of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine, model SR8, features 8 cavities for bottle formation. Consequently, this configuration produces 12,000 bottles of 0.5 liters per hour. For larger formats, such as bottles of 1.5 liters and 2 liters, it achieves a production speed of 9,600 bph. Moreover, the 18-81 bottle neck type guarantees compatibility with a wide range of caps and closures, making it adaptable to diverse production needs. Thus, this standard ensures precise sealing and airtight closures.. Main Components of the Used Blow Molding Machine SMIForm SR8 year 2005 12000 bph This SMIform machine integrates a preform loader, a preform elevator, and a preform orientator, which work in harmony to provide an automated and efficient feeding process. Preform loader: This component loads preforms from the storage area or initial container and transfers them seamlessly to the elevator system. Consequently, it ensures continuous feeding without manual interruptions. Preform elevator: The elevator lifts the preforms from the lower level to the machine’s operating level, ensuring a continuous flow to the orientator and minimizing downtime. Therefore, production proceeds smoothly. Preform orientator: The orientator positions and aligns each preform correctly before inserting them into the blow molding cavities. Additionally, using mechanical guides or vibrations, it prevents misaligned preforms from entering the process. The integrated tipper tilts and discharges large quantities of preforms, typically stored in containers or boxes, in a controlled manner. Subsequently, the tipper feeds the preforms into the production line, maintaining a consistent flow while preventing overloads and blockages. By automating this process, the tipper reduces manual handling and significantly increases safety and productivity. The unscrambler plays a key role in separating and aligning the preforms before their insertion into the blow molding cavities. Specifically, by applying rotation and vibration, the unscrambler ensures optimal positioning, minimizing errors and machine stoppages. Hence, the combined action of the tipper and unscrambler maximizes production line efficiency and guarantees product quality. Furthermore, the machine’s rotary configuration facilitates continuous and stable production, which is ideal for high-intensity manufacturing. Its rotary technology, as a result, distributes heat evenly during the blowing process, ensuring high-quality output. Safety and Documentation Hfsdpsvv E Hiefx Afisn The blow molding machine includes technical manuals and safety protections.

Condition: new, Year of construction: 2025, Samples System to fill small bottles with small volume of liquid: Typical use is filling of eye drops, nail polish and other. Infeed by infeed line; possibly from an sorting system upstream (which is not included in this system). The system includes a container unscrambler, which sets the small bottles after the filling into an outfeed line. The system is PLC controlled. - Specifications: max. speed of the machine in neutral: 50 bottles/Minute; filling capacity: 20-60ml; 1.75kW; 6-8bar. All theses specifications are just examples. The final system will be custom-built. - Please give us your detailed inquiry (container shape and size, speed , product to fill, working steps) to give you a full quotation. Hfjdpfxev Nlbyj Afion Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2015, Used Blow Molding Machine SMI SR10HP year 2015 Firstly, the SMI SR10HP, produced in 2015, emerges as an advanced solution for PET container production. This analysis aims to detail its technical specifications and operational features. It significantly highlights the machine’s efficiency and productive capacity in industrial environments. Productive Capacity and Versatility of the Blow Molding Machine SR10HP Importantly, the machine achieves a remarkable speed of 17,000 BPH, showcasing its high capacity. It adeptly processes a variety of container sizes, including 0.20 L, 0.33 L, and 0.6 L, thereby offering considerable flexibility in production lines. Configuration and Components Moreover, it boasts ten cavities for simultaneous preform processing, which optimizes production time. Integrated systems, such as a loader, tipper, and unscrambler, automate preform handling. Consequently, these systems minimize manual intervention and significantly boost operational efficiency. Technology and Innovation of the Blow Molding Machine SR10HP Additionally, a compressor and chiller are crucial for controlling temperature and air pressure, ensuring the quality of PET containers. Furthermore, an air recovery system innovatively reduces energy consumption, highlighting a strong commitment to sustainability. Standards and Compatibility Equally important, the machine operates with 1881 neck type preforms, a widely accepted standard, ensuring compatibility with various bottling lines. Its rotary design facilitates high-speed production while maintaining high-quality standards, thereby ensuring reliability. Operational Status and Safety Currently, the Blow Molding Machine SR10HP is in operation and meets strict safety standards, effectively protecting operators. Provided manuals support efficient maintenance and optimal machinery use, enhancing operational longevity. Electrical Data On the electrical front, specifications require 380V, with a consumption of 300kW and an intake of 494A. This detail underscores the machine’s commendable energy efficiency. Conclusion Hjdpfovgt I Nex Afisfn In conclusion, the 2015 SMI SR10HP machine stands out for its productive capacity, energy efficiency, and technical sophistication. With a strong focus on sustainability, it represents an ideal choice for industries seeking reliable, high-quality solutions for PET container production.

Condition: used, Year of construction: 2003, operating hours: 34,000 h, Used Blow Molding Machine Kosme 2003 No. of cavities 4 Hfedpfx Ajvgundofijn Preform loader YES Preforms tipper YES Preforms unscrambler NO Compressor NO Air Recovery System NO Type KSB 4 year 2003 Linear or Rotary LINEAR Capacity: 2,0 l 3000 bph 1,5l 3500 bph 1,0 4000 bph 0,33-0,5l 4500 bph In working condition Without molds Available midle of august 2022 neck 1881 and 1810 have manuals available

Condition: used, Year of construction: 2016, Used Blow Molding Machine Terekas up to 5L 1000 bph Hfjdpfxow Ibm To Afion This used blow molding machine from Terekas, model FlexBlow 1, is designed for demanding PET bottle production, offering advanced flexibility and efficiency. With a maximum bottle capacity of up to 5 liters and a throughput of up to 1,000 bottles per hour, the system is engineered for operations that require consistent product quality across multiple neck finishes and formats. The FlexBlow 1 utilizes a linear blow molding architecture, equipped with a single cavity, making it ideal for short production runs, frequent changeovers, or pilot lines. It integrates seamlessly into existing filling and packaging lines, thanks to its modular design and compatibility with multiple container types. The preform feed system includes a tipper, unscrambler, and loader, all designed to ensure reliable, jam-free supply of preforms into the production cycle. The core of the process begins with a robust preform heating tunnel, employing infrared (IR) lamps enclosed within a secure, ventilated housing. Preforms are conveyed through the heating zone by an articulated chain system, which ensures precise and uniform exposure to the heat source. The IR heating zone is shielded by a protective grid, preventing accidental contact while maintaining optimal thermal consistency across the preforms. The tunnel design avoids excessive hot spots or thermal degradation of the preform, contributing to higher end-product quality and reduced scrap rates. Precise Control and Reliable Operation After exiting the heating tunnel, preforms are transferred automatically into the blow molding station. The FlexBlow 1’s single-cavity blow unit utilizes high-efficiency pneumatic actuators and robust mold clamping mechanisms to produce containers up to 5 liters in volume. This configuration allows for rapid cycling and excellent pressure control throughout the stretch-blow sequence. The complete air handling system is engineered for reliability, with integrated air recovery to optimize compressed air consumption and reduce overall utility costs. Critical to the system’s operation is the dedicated chiller, which ensures mold cooling circuits remain within the required temperature range, guaranteeing consistent bottle wall thickness and minimizing cycle times. All pneumatic and hydraulic components are mounted in a well-organized auxiliary area, with clearly labeled connections for maintenance and diagnostics. Filtration and lubrication points are readily accessible, supporting a high level of system uptime and minimizing unscheduled stops. Machine operation and process parameters are managed through a touchscreen HMI panel installed directly on the electrical cabinet. This interface provides real-time control over all production settings, alarm management, and maintenance prompts. The entire machine is wired in a highly organized manner, with secured electrical panels, neatly routed cables, and clearly identified terminals for ease of troubleshooting.

Condition: used, Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors. Bottle Feeding and Preparation Section At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages. Weight-Based Filling and Snap-On Capping The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time. Hfodpowa Tqiefx Afijn Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.