Used Reading for sale (2,403)

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Hsdpfx Abjh A S Hto Isk Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, cutting width (max.): 16 mm, type of input current: three-phase, total length: 700 mm, total width: 1,000 mm, total height: 1,050 mm, input frequency: 50 Hz, year of last overhaul: 2022, space requirement height: 1,050 mm, space requirement length: 700 mm, space requirement width: 1,000 mm, Rego Roto Shop DL rotary knife slicer; knife newly sharpened and coated; manual operation via rotary control; cutting width 3–16 mm; power supply: 400V, 16A CEE plug; bread chute: 40 x 23 cm; dimensions: 1000 x 700 x 1050 mm (W x D x H); used machine, cleaned, SAB tested. Hsdpfjrhv E Nsx Ab Ijk Option: Maintenance contract Delivery service Instruction & commissioning TOP bread slicing machines in stock!

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, cutting width (max.): 25 mm, type of input current: three-phase, total length: 750 mm, total width: 620 mm, total height: 860 mm, input frequency: 50 Hz, space requirement height: 860 mm, space requirement length: 750 mm, space requirement width: 620 mm, Bread Slicing Machine with Circular Blade Wabäma Model: R 300 EX Hjdpfx Aberyr Hlj Ijk The all-rounder among bread slicing machines EX model for integration into the sales counter! Maximum slices: 140 pcs/min. Mobile machine Adjustable slice thickness from 4 to 25 mm Connection: 400V, 16A-CEE plug Dimensions: 620 x 750 x 860 mm (W x D x H) Used machine We offer the largest selection of bread slicing machines!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, warranty duration: 3 months, DGUV certified until: 03/2027, cutting width (max.): 25 mm, type of input current: three-phase, total length: 690 mm, total width: 800 mm, total height: 1,100 mm, control voltage: 24 V, input frequency: 50 Hz, year of last overhaul: 2026, space requirement height: 1,100 mm, space requirement length: 690 mm, space requirement width: 800 mm, Bread Slicer Treif Diskus 400 + Stainless steel version Knife newly sharpened and coated Manual operation via rotary control Robust engineering DGUV V3 safety tested – only with us Connection: 400 V, 16A CEE plug Used machine – cleaned and SAB tested Comes with warranty Options: Maintenance contract Spare blade Hsdpfx Abox Ratxj Iek Delivery service Spare parts box Service package Training & commissioning Visit our large bread slicer exhibition!

Condition: good (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, cutting width (max.): 20 mm, type of input current: three-phase, total length: 750 mm, total width: 1,000 mm, total height: 1,150 mm, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 1,150 mm, space requirement length: 750 mm, space requirement width: 1,000 mm, Bread slicing machine Wabäma model: Allround Economy Plus 380.200 Max. number of slices: 100 pcs/min Blade with high-quality special Teflon coating Mobile machine Only with us: DGUV V3 tested Connection: 400V, 16A CEE plug Used machine, inspected by SAB Hedpfx Ajvkn Hzob Iek + spare parts service Options: Maintenance contract Spare blade Service package Many bread slicing machines in stock!

Condition: good (used), 318 USED Bread slicer, single-knife, adjustable slice thickness. TECHNICAL DATA: - Power: 380 V. EXTERNAL DIMENSIONS (in cm): - Height: 130, - Width: 59, - Length: 77. Hodpfx Asyptgujb Iok The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN.

Condition: good (used), 317 USED JAC Tabletop Slicer, 11mm slice thickness. Hjdeyprq Sspfx Ab Isk TECHNICAL DATA: - Power: 400V. EXTERNAL DIMENSIONS (in cm): - Height: 60, - Width: 60, - Length: 67. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN.

Condition: new, Year of construction: 2026, functionality: fully functional, Multifunctional PASTRY LINE BPL 280 is designed to effortlessly produce high volumes of various breads and pastries, stuffed or not from yeast or puff pastry dough and etc. The versatility of the line allows the production of a wide range of products without significant changes in the modular composition of the line. LINE COMPOSITION (basic configuration): 1) LAMINATING-FORMING MACHINE 2) GUILLOTINE 3) DISPENSER 4) DIAPHRAGM KNIFE - diaphragm cutting Productivity up to 9000 pcs/hour, Dimensions - 6300x680x1600 mm, Weight - 700 kg. Hjdpfxjf Ec Ivj Ab Isk Price excludes VAT, terms 50% in advance, 50% before collection of the machine, EXW 1 Year Warranty Machine is made new to order. All our machines make a production line that can be operated by one baker, SoloBaker.

Condition: good (used), Year of construction: 2002, 316 USED Bread Slicer, single-knife, adjustable slice thickness. TECHNICAL DATA: - 400V power EXTERNAL DIMENSIONS (in cm): Hjdpfx Absypchzo Ijk - height 130, - width 160, - length 70. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN.

Year of construction: 2003, condition: used, machine/vehicle number: 184323, For sale is a used IXION thread tapping machine BT 30 GL E (BT 30 GLE) suitable for series production or workshop operations. The machine is fully operational; on-site demonstration under power is possible and expressly encouraged. Location: 57439 Attendorn Collection by buyer – forklift available, loading free of charge Delivery condition: EXW 57439 Attendorn Technical Data / Equipment (according to documentation): - Thread cutting capacity: M5 – M30 - Thread depth: 90 mm - Working stroke: 90 mm - Rapid traverse: max. 80 mm - Spindle speeds (5 steps): 160 – 880 rpm - Motor: pole-changeable 1.3 / 2.4 kW, motor speed 700/1400 rpm - Power supply: 400 V, 50 Hz, three-phase (5-wire: L1/L2/L3/N/PE) - Reach: 280 mm - Spindle to table: 220 – 600 mm - Table size: 390 × 420 mm - T-slots: 14 mm - Column diameter: 120 mm - Total height: max. 2100 mm - Weight: approx. 370 kg Pneumatics / Compressed Air: - Pneumatic rapid traverse - Compressed air unit included External compressed air supply/plant air required on site Coolant system (included): - Coolant/lubricant unit (electrical; tank/pump/hoses/piping as present) Scope of delivery: - IXION BT 30 GL E / BT 30 GLE as shown - Coolant system included - Available documentation Hsdpfsyn Snhsx Ab Iek Legal Notice: Sale exclusively to businesses as defined by § 14 BGB (B2B). Sale with exclusion of liability for material defects. No warranty, no returns. Sale as inspected/demo’d. Subject to prior sale and errors.

Condition: new, working width 1300 mm manual cleaning brush manual element height adjustment glue dosage adjustment CE marking safety switch power supply 380V completely new 2026 Hjdpfx Abeyn I Rle Iok

Condition: used, This listing is for the Tecan Infinite 200 Pro Microplate Reader The unit is in full working condition and is ready for immediate use The Tecan Infinite 200 PRO is a multimode microplate reader — a laboratory instrument used to measure the intensity of light in biological and chemical assays placed in microplates (usually with 96, 384, or more wells). It’s widely used in life sciences research, clinical labs and drug discovery for quantitative analysis of samples Typical Uses Laboratories use this type of plate reader to: • Quantify DNA/RNA or protein concentrations • Run immunoassays like ELISA Hodpfx Aoydqmzjb Iek • Perform drug screening assays • Read fluorescence or luminescence signals from reporter gene assays • Monitor cell viability or enzyme activity

Condition: good (used), Die set, hand pipe thread cutter, thread cutting machine, pipe thread cutter, pipe thread cutter, cutting head, tap wrench -Tap cutting set: 47-piece / internal and external threads -Size: M3 to M20 -Individual components: see photos -Dimensions: 500/420/H85 mm -Weight: 9.1 kg Hedpfjyk Upyox Ab Ijk

Condition: new, Year of construction: 2026, CORMAK RGE36PWx1700 Electric Tapping Machine – Advanced Threading for Industrial and Workshop Applications The CORMAK RGE36PWx1700 electric tapping machine is an advanced threading solution that performs exceptionally well in both large production plants and smaller workshops. Design and Technology of the CORMAK RGE36PWx1700 Tapping Machine The CORMAK RGE36PWx1700 features a robust construction that enables efficient and precise threading in a wide range of industrial environments. It is powered by a servo drive, ensuring reliable operation and precise control of tapping parameters. Thanks to the tapping arm and rotating motor assembly, the machine can cut threads in various materials such as steel, stainless steel, aluminum, and non-ferrous metals. Hjdpfx Abjycdhpj Isk The tapping arm is equipped with a quick-change chuck, allowing fast and easy installation of taps. Adjustable overload clutches integrated into the tap holders provide additional protection against tool damage during operation. This system also allows precise torque adjustment, ensuring high threading accuracy. Precision and Work Efficiency of the CORMAK RGE36PWx1700 The performance of the CORMAK RGE36PWx1700 is the result of modern technology combined with a heavy-duty design, ensuring long-term, reliable operation. The servo drive and rotating arm deliver high precision while maintaining fast threading cycles. Adjustable rotational speed and thread depth make the machine ideal for cutting threads with varying specifications. The threading process is further supported by a micro-spray system that effectively cools the tools, improving efficiency and extending tool life. Standard Equipment – CORMAK RGE36PWx1700 Touchscreen control panel – easy programming of tapping parameters such as rotational speed, tapping direction, and thread depth Rotating tapping arm – enables thread cutting at any angle Tap holders with adjustable overload clutches – protect the machine from excessive load and ensure long service life Micro-spray lubrication system – continuous tool cooling with minimal coolant consumption Chip blower – effective chip removal and improved visibility during tapping Technical Specifications – CORMAK RGE36PWx1700 Power: 2 kW Power supply: 230 V Weight: 56 kg Maximum arm reach: 1700 mm Maximum rotational speed: 125 rpm Included in the set: Tap holders for tap sizes from M5 to M36 *The machine is sold without a worktable, vise, and taps.

Condition: new, Hydraulic threading machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm thread M 5 - M 24 Working range 2050 Rmax. working height 920 mm table surface 900 x 700 mm oil capacity 100 l Motor power 3,0 kW Weight:220 kg Equipment: Hydraulic threading machine Incl. machine base with clamping disk Mobile Hydr. manometer Infinitely variable speed adjustment from 0 - 600 rpm Hedjkhmgiepfx Ab Iek Vertical / horizontal thread cutting possible Special accessories included / quick change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Bernardo TM 16 BLO/ R 1100 Electric thread cutting machine Technical specifications Tapped holes* M3 - M16 Speed max. 120 - 325 rpm Adjustable angle 0° - 90 Max. Working radius R 1100 mm Quick change chuck DIN 371: M3 / M4 / M5-6 / M8 / M10 DIN 376: M12 / M14 / M16 Motor power 600 W Voltage 230 V weight approx. 26 kg Hodpfx Aepag Npsb Iek * Material strength 400 N / mm2 Scope of delivery Operation via touch screen Digital drilling depth display Micro spray system Blow-out device Quick change chuck Quick change chuck according to DIN Electric motor 90° angle adjustment Mounting flange Features Standard with micro-spray system for constant cooling and minimal cooling lubricant consumption Including blow-out device for removal of chips, thus optimal view of the drill hole Including quick-change chuck for the use of taps for through and blind holes Swiveling motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed right angle (90°) High productivity, significant time savings compared to manual thread cutting Quick-change chuck with integrated slip clutch prevents tap breakage Including swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base 900 x 600 mm with 2 drawers for TM series 830,00

Condition: new, Bernardo TM 36 BLO/ R 1200 Electric threading machine Technical specifications Threaded holes* M5 - M36 Tool holder GT 24 Speed max. 30 - 150 rpm Adjustable angle 0° - 90 Max. Working radius R 1200 mm Quick-change chuck DIN 376: M5-6 / M8 / M10 / M12 / M14 M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36 Motor power 1200 W Voltage 230 V Weight approx. 35 kg * Material strength 400 N / mm2 Scope of delivery Operation via touchscreen Digital drilling depth display Hjdpfx Abopag R Rs Isk Micro spray system Blow-out device Quick-change holder Quick-change chuck according to DIN Electric motor 90° angle adjustment Mounting flange features With micro-spray system as standard for constant cooling and minimum cooling lubricant consumption Includes blow-out device for removing chips, providing an optimum view of the drill hole Includes quick-change chuck for using taps for through holes and blind holes Swivel motor unit for tapping at any desired angle between 0° and 90 Higher accuracy compared to manual tapping, thread is guaranteed to be at right angles (90°) High productivity, significant time savings compared to manual tapping Quick-change chuck with integrated slip clutch prevents the tap from breaking Includes swivel arm with large radius for easy positioning of the tap on the workpiece For tapping in steel, stainless steel, aluminum and non-ferrous metals Price: Base frame 900 x 600 mm with 2 drawers for TM series 830.00 € plus 19% VAT

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Hsdpjtbawksfx Ab Iok Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, input voltage: 400 V, DGUV certified until: 03/2027, total length: 700 mm, total width: 600 mm, total height: 1,520 mm, type of input current: three-phase, power: 1 kW (1.36 HP), electrical fuse: 10 A, Semi-automatic dough divider and rounder, Hsdpfx Abjrkzgwe Iek Bun press for burger buns, pita, burek, flatbread, etc. NEW +++ Divobun 4-14 +++ NEW Proven technology ... tried and tested many times! Stainless steel blades with easy cleaning position! Includes 3 rounding plates Portion range: 130 to 400 grams per piece TOP dough divider Movable machine DGUV V3 safety tested exclusively by us Connection: 400V, 16A CEE plug Dimensions: 600 x 700 x 1520/2200 mm (WxDxH) New machine 2-year warranty + spare parts service Optionally available: - Leasing & rental service - Maintenance contract - Service package - Stainless steel machine podium - Delivery service - Additional rounding plates - Training & commissioning Other TOP dough dividers in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, year of last overhaul: 2024, inner dimension height: 2,200 mm, inner dimension width: 1,150 mm, total height: 2,500 mm, total length: 4,800 mm, total width: 1,270 mm, type of input current: three-phase, overall weight: 610 kg, input current: 16 A, control voltage: 24 V, Fully automatic lye application process Riehle Model: Comjet with 1 trolley roller 580x980 Capacity up to approx. 240 trays/hour 180-liter movable lye tank Triple lye curtain for optimal coverage Suitable for tray sizes 580 x 780 & 580 x 980 mm High pump performance with dual filter With salt dispenser Hedpfx Abswmvzke Isk Stainless steel construction Connection: 400V, 32A CEE plug Dimensions approx. 1270 x 4800 x 2500 mm (W x D x H) Used machine, cleaned Options: Truck delivery Training & commissioning Service package Maintenance contract Many more bakery machines in stock!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, input voltage: 230 V, warranty duration: 24 months, DGUV certified until: 03/2028, cutting width (max.): 30 mm, type of input current: AC, total length: 746 mm, total width: 990 mm, total height: 1,080 mm, control voltage: 24 V, nominal power: 1 kW (1.36 HP), input frequency: 50 Hz, space requirement height: 1,080 mm, space requirement length: 746 mm, space requirement width: 990 mm, bread slicer Model: Varia Pro 1000 Hsdpfx Ash Ia Sfob Iok easy handling 200 slices/min Cutting width/bread length 490mm circular knife machine manual operation Slice thickness adjustable from 4 - 30 mm Dimensions: 990 x 746 x 1080 mm, WxDxH Bread dimensions max: 490 x 340 x 160 mm L x D x H DGUV V3 tested Connection 230V, 1kW new machine with warranty Option: - Stainless steel version 600,-€ - Automatic claw €200 - Bag holder €100 - Special colors 350,-€ - front bread shelf 100,-€ Visit our large bakery machines sales warehouse!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 03/2027, input frequency: 50 Hz, type of input current: three-phase, year of last overhaul: 2026, Hommel Rotormat 1000 Super Surplus Bread Crusher TOP model: Rotormat 1000 Super "the universal crusher" Stainless steel construction High performance Connection: 400V, 16A-CEE plug Dimensions: 690 x 650 x 1550 mm (W x D x H) Used machine, cleaned With warranty and spare parts service Quality from a specialist company! Benefit from over 35 years of experience! Options: Additional sieve Service package Maintenance contract Delivery service Spare parts box for greater security! Training & commissioning Visit our large exhibition! Hodpfx Abjxiu N Ao Isk

Condition: new, thread dia. M6 - M36 Hedpfx Ajxab Eljb Iok turning speeds 30 - 150 U/min working area max. 1200 R angle adjustable from - to 0 - 90 Grad voltage 230 V engine output 1200 W weight 65,0 kg - Includes quick-change chuck - for use with taps - for through holes and blind holes - Swivel motor unit for thread cutting - at any desired angle between 0° and 90° - Higher accuracy compared to manual thread cutting - Thread is guaranteed to be right-angled (90°) - High productivity - significant time savings compared to manual thread cutting - Quick-change chuck with integrated slip clutch - Includes swivel arm with large radius - for easy positioning of the tap on the workpiece - Highly economical due to low investment and maintenance costs - For thread cutting in steel, stainless steel, aluminum and non-ferrous metals Scope of delivery - Operation via touchscreen - Digital drilling depth display - Quick-change holder according to DIN - Quick-change chuck - Electric motor - 90° angle adjustment - Mounting flange Special accessories included: - BERNARDO base frame with 2 drawers * milled support surface 900 x 600 mm * including 3 T-slots (16 mm) * large storage space and 2 drawers for storing tools * 4x swivel castors including parking brake - Mounts according to DIN 376: * M5-6 / M8 / M10 / M12 / M14 / M16 / M18 / M20 / M22-24 / M27 / M30 / M33 / M36

Condition: new, thread dia. bis M 36 turning speeds 0-100 U/min thread M5 - M36 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 5,5 kW weight - pallet system ca. 500 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base Hsdpfx Ajxab Igsb Ijk * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M 22 M27 / M30 / M33 / M36

Condition: new, thread dia. bis M 24 turning speeds U/min thread M5 - M24 working area 2050 Rmax. working range 500 Rmin. work height max. 900 mm table surface area 700 x 900 mm oil volume 100 l engine output 3,0 kW weight - pallet system ca. 300 kg Furnishing: - electro-hydraulic thread cutting machine - large working area (radius max. 2050 mm) * including table clamping disk * Swivel movement is smooth thanks to built-in gas pressure dampers - mobile machine base * Oil tank + hydraulic unit integrated in the base frame * hydraulic pressure gauge - continuous speed adjustment - vertical/horizontal thread cutting possible - Lateral sorting of the quick-change inserts possible - Connection cable with 16A plug Special accessories included / quick-change inserts: M05 / M06 / M08 / M10 / M12 / M14 / M16 / M18 / M20 / M22 Hsdpfjxab Iajx Ab Isk