Veneer gluing machine

Kuper FWJ900

Condition: used, max. veneer thickness: 2.0 mm min. veneer thickness: 0.4 mm Joining material: glue thread with hot air heating Compressed air required: yes Disc: Yes, for transporting the veneer over the veneer table Control via foot pedal Machine type: floor model Iodjxgqmxopfx Ahvotd Feed speed: 7 m/min Stand extension: 900 mm Weight approx.: 185 kg Dimensions: 1400 x 500 x 1680 mm Storage location: Nattheim

Condition: used, Working width 500 mm Number of knives 4 St. knife system Streifenhobelmesser Iodox Eykgjpfx Ahvjtd

Condition: excellent (used), Veneer gluing machine FWJ900 With glue veneer, neat condition Max. veneer thickness 2 mm, min. 0.4 mm Itodpjvkfncofx Ahvsd Control via foot pedal Floor model, feed speed 7 mm, throat 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm

Condition: used, used, good conditionmake Kupertype FWJ 900machine no. 18033834throat depth 900 mmthreadheating airmobilespace requirement approx. 1400 mm x 600 mm x 1600 mmweight approx. 350 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Isdevwfaxjpfx Ahvstd

Condition: used, machine/vehicle number: 006279, X axis working area: 3100 mm Y axis working area: 1250 mm Working Table: Flat table Iedpfx Aekw H Ekohvetd Number of controlled axes: 3 axes Total number of drilling spindles: 11 Total number of tool changer positions: 8

Condition: excellent (used), HA 4 surface planer planing width 450 mm total table length 2500 mm Feed table 1500 mm Machine height 820 mm Max. Chip thickness 15 mm Iodpsinkfnsfx Ahvjtd Cutter shaft revolutions 4800 rpm Motor power 4 HP Weight 660 kg 3-piece cutterhead

Condition: new, SCM Olimpic 500 HT - Automatic Edge Banding Machine New machine with warranty. - Olimpic 500 - "HP T-ER2" version - "eye-S" control panel - "Maestro active edge" human-machine interface (HMI) software - Fine milling and radius scraping unit, radius = 1 mm - Fine milling and radius scraping unit, radius = 2 mm - Electronic positioning of the upper pressure beam Isdpfxjwkf Iho Ahvjtd - Spacer on the infeed guide - "SAVENERGY" kit - Interior lighting of the booth and gluing area - Nesting rollers - Release agent spray unit "AAR" 1 - Sprayer for finishing the edge - Sprayer for delicate edges - "RT-V1" jointing unit - "EASY SIZE" device - "VC-VM" gluing unit - Ceramic lamp with infrared rays - Electronic positioning of the pressure rollers - "K-2 Radius" trimming unit - Chamfering and Radius milling unit "R-HP Multiedge 2R" - Rounding unit "Round 2-A Multiedge 1R" - MULTIEDGE kit with 3 automatic positions straight/R/R, for "Round 2-A" - Radius scraper unit "RAS-HP Multiedge 2R" - Flat scraper "RC-N" - Buffing unit "SP-V" Machine is new and still in original packaging. Promotional machine at a special price.

Condition: used, Year of construction: 1996, Edge thickness: 0.4 - 12 mm Roll edge: 3 x 45 mm or 0.8 - 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Workpiece thickness: 10 - 55 mm Feed rate: 13 m/min Pre-milling (joining) Glue pot Quickmelt Gluing unit Trimming Flush trimming Chamfering Radius trimming Corner rounding Flat scraper Buffing unit Machine dimensions: 7450 x 1220 x 2400 mm Weight: 3000 kg Storage location: Nattheim Ijdevvkd Tjpfx Ahvjtd

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: Iedpfx Aeyftzkjhvotd • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: good (used), BIESSE ARROW ATS 5 AXIS NC1000 MACHINING CENTER Ijdpeukcy Eefx Ahvjtd Machining head with revolver tool change BH39 drilling machine, 250m3 vacuum pump (this machine had been in operation for 10 years in a woodworking school)