Ball valve internal thread stainless steel

Pekos K806 SGSGV 1 Zoll

Condition: ready for operation (used), Facing lathe DP 2000 Chuck diameter 2000 mm Length 4500 mm 2 tool posts included with the machine Weight approx. 22 tons Ijdsv Hx R Nepfx Ahysbc Video of the machine in operation available!

Condition: new, Year of construction: 2025, Automatic liquid filling and capping system. Suitable for various liquids and oils from the food industry (water, juices, liqueurs, olive oil, sunflower oil, etc.) as well as from non-food (perfumes, cosmetic oils, detergents, etc.). The liquid filling system has 2 filling heads moving in vertical and horizontal direction, which allow continuous filling and thus a higher number of cycles. Automatic detection of the position of the bottles and of the neck diameter of the lid. The Advantage is less adjustment work and sensor settings (within a certain range) have to be carried out. The change to different bottle dimensions is considerably facilitated, which ultimately results in lower machine downtime due to the time savings. Easy adjustment to different bottle width and height without the need for additional format sets. After filling, the bottles are conveyed by a conveyor belt to the automatic lid capping machine. The positioning and closing of the lids are fully automatic. - Specifications: filling range: 30-3000ml; number of filling heads: 2; max. speed of the machine in neutral: 50 cycles/minute; SUS304, product contact parts from SUS3316; dimensions and weight of the packaging system depending on the final layout. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Iedpfx Ahov Nk R Hjysbc

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Ibsdpfsxtaxwjx Ahyoc Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1979, functionality: fully functional, center width: 2,840 mm, center height: 1,200 mm, center height in crank: 1,700 mm, spindle motor power: 28 W, spindle speed (min.): 5 rpm, spindle speed (max.): 540 rpm, quill stroke: 750 mm, feed force X-axis: 75 N, feed force Z-axis: 110 N, workpiece weight (max.): 3,000 kg, input voltage: 400 V, The machine is in good condition; the control cabinet was replaced 10 years ago. The machine is currently disassembled and stored in the warehouse. Ibedpfxjy S A Tdj Ahyoc If required, we can install the machine and provide training.

Condition: good (used), turning diameter over bed slide: 1,400 mm, turning length: 5,000 mm, Centre lathe ZERBST - DPS 1400 MACH-ID 582 Make: ZERBST Type: DPS 1400 Year: 1976 DBC Turning Length: 5000mm Swing over bed Ø: 1400mm Swing over cross slide Ø:1250mm Spindle bore: 100mm Ibodpfjwvirhjx Ahyoc

Condition: new, Year of construction: 2026, Cyclone Dust Separator with Waste Container and Vacuum Hose Included Ijdpsvu Uugsfx Ahysbc The cyclone dust separator with waste container and vacuum hose is a practical solution designed for efficient dust extraction in woodworking workshops and industrial environments. The separator allows two machines to be connected simultaneously, improving the efficiency and convenience of the dust collection system. The dust separation process is based on centrifugal force. Extracted dust particles are separated from the airflow and collected in containers located beneath the cyclone. The separator efficiency reaches 90–95%, significantly reducing the amount of dust reaching the filtration system. Device description Metal separator housing, Metal waste collection container, Mobile base, Ergonomic handle, Viewing window for checking the container fill level, Quick-release clamps for easy bag installation. The cyclone must be connected to a fan or dust extraction system. Operating principle In the cyclone separator, contaminated air enters the cylindrical chamber and begins to rotate. Due to centrifugal force, heavier particles suspended in the airflow are pushed toward the outer walls of the chamber. As they lose speed and kinetic energy through contact with the cyclone walls, they fall downward under the influence of gravity and collect in the container. The lightest sawdust particles are then captured by the filter cartridge and directed into the collection bag, while cleaned air exits through the sides of the filter. Technical specifications Parameter Specification Tank capacity 118 L Bag dimensions Ø500 x 850 mm Inlet diameter 125 mm Inlet adapter diameters 1 x Ø125 / 2 x Ø100 mm Outlet diameter 125 mm Outlet adapter diameter Ø125 mm / Ø100 mm Weight (net/gross) 24 / 26.5 kg Overall dimensions 785 x 508 x 1545 mm Note: The fan, dust extractor, and Ø100 mm hose are not included in the set.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZOF01, type of input current: three-phase, total width: 900 mm, total length: 1,200 mm, total height: 2,200 mm, input voltage: 220 V, workpiece weight (max.): 450 kg, pass-through height: 1,200 mm, Equipment: CE marking, This filling machine could be linear tor rotary type which is designed according to customers capacity and filling volume. It suits different size of plastic and glass bottles, and the height of the filling nozzles is adjustable. The filling nozzles are Ibedpfx Ajxul Igshyjc made of SS304 or 316, resist high temperature filling. drip-proof , via photoelectric detection to ensure no bottle no filling. Widely used for liquid and paste filling. Also can be customized for other types of filling based on customer requirement.

Condition: good (used), Used stainless steel transport container / pressure vessel Article number: 10543 Quantity: 13 Last use: Foodstuffs Volume: 950 L Type: Standing on four legs with forklift tunnel Material (in contact with the medium): 1.4301 / AISI304 Design: Single-walled Domed lid, Ø 400 mm Operating pressure according to nameplate: 0.7 bar Container dimensions: Ibjdpfx Aogx U Rgshysc Outer diameter: 1000 mm Overall height: 1800 mm Overall width: 1000 x 1000 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Equipment: Nameplate: Yes Outlet diameter: DN 50 Outlet valve: Ball valve

Condition: used, turning diameter over bed 930 mm turning diameter over slide rest 630 mm turning length 6000 mm turning dia. in gap 1250 mm spindle diameter 95 mm speed 8-800 (x24) U/min Ijdjyuqd Uopfx Ahysbc total power requirement 22 kW weight of the machine ca. 1100 t

Condition: used, Used stainless steel container / transport container / IBC Last intended use: Pharmaceuticals, cosmetics Article number: 10804 Volume: 1000 liters Type: Standing in galvanized stacking frame Material (in contact with media): 1.4571 / AISI316 Manhole: 400mm Design: Single-walled Operating pressure according to nameplate: ATM Ibodpfx Ahov Dt Nneysc Container dimensions: Total width: 1020mm Total length: 1220mm Total height: 1640mm Materials: Inside: 1.4571 / AISI316 Outside parts: 1.4301 / AISI 304 Facilities: Nameplate: No Outlet diameter: DN50 Outlet valve: Disc valve Distance from drain to floor: 280mm