Used Radial Boring Machine for sale (92,103)

Condition: good (used), Year of construction: 1990, Used radial drilling machine from MAS Type VO 80 Pjdpfx Agowa A Drjworc Drilling capacity 80 mm

Condition: new, Year of construction: 2015, Factory-new machine, has only been used for test runs, condition is as new. TECHNICAL DESCRIPTION The DIGIT MAGGI throughfeed drilling machine is an automatic multi-spindle throughfeed drilling machine equipped with 2 horizontal heads and 6 vertical heads, designed for high-volume production. TECHNICAL SPECIFICATIONS Number of horizontal heads: 2 Number of vertical heads: 6 Minimum distance between vertical heads: 165 mm Prodpfx Agjxd Ruwowec Minimum distance between horizontal heads: 320 mm Distance between spindles: 32 mm Number of spindles in horizontal head (left red - right black): 23 (11 - 12) Number of spindles in vertical head (left red - right black): 11 (5 - 6) Maximum vertical drilling depth: 55 mm Maximum horizontal drilling depth: 65 mm Maximum workpiece dimensions: 2800 x 870 x 50 mm Minimum workpiece dimensions: 250 x 150 x 12 mm Number of motors: 12 Horizontal head motor power: 2 HP (1.5 kW) Vertical head motor power: 1.5 HP (1.1 kW) Number of clamps: 10 Loader feed speed: 57 m/min Working air pressure: 6–8 bar Standard air consumption: 60 l/cycle Maximum clamp height above worktable: 75 mm Overall dimensions: 4150 x 1600 x 1800 mm Worktable height: 950 mm Packaging dimensions: 4300 x 1950 x height 1900 mm

Condition: good (used), Jig boring/Milling machine HAUSER 3DR Pjdeiix Ipepfx Agwjrc Travel X: 400 mm Travel Y: 200 mm Travel Z: 400 mm Spindle: 2 speeds Cone:CM2 Spindle exit: 120 mm 2 speed ranges 60-1500 RPM / 1500-3000 RPM Table size: L 590 mm x W 320 mm Speed variator at the spindle 2 advances Auto descent: 0,03 mm/min - 0,06 mm/min X-axis functional with Mitutoyo devise Y and Z axis: defective scale Voltage: 380 V Width: 1500 mm Depth: 1700 mm Height in low position: 1800 mm Weight: approx 1,5 T

Year of construction: 1991, condition: used, machine/vehicle number: 9198590, Technical data: -Drilling capacity 60 mm -Throat depth 1600 mm -Spindle mount Mt 5 -Spindle hub 390 mm -Spindle speeds, 20 levels 20-2000 RPM -Right rotation -Feed, 12 steps 0.056 2.5 mm/U - drive 400 V / 12.8 kW -Clamp the boom and electromechanical drill unit -Was wrought bed - boring Quill - min approx. 900 mm -max 1600 mm -usable machine bed with 4 T-slots 950 x 1700 mm -Coolant system Prodpfx Agedhkhtjwjc -Cube table - space requirement approx. B 2600 x H 3000 x T 1000 mm - weight approx. 4500 kg

Condition: used, Kolb radial drilling machine MK 5 boom 1500 mm with clamping table Pjdsulz Iwspfx Agwsrc

Year of construction: 2021, condition: as good as new (ex-display), Max. drilling diameter 50 mm Max. travel of spindle 315 mm Max. distance from spindle axis and column 1600 mm Min. distance from spindle axis and column 350 mm Max. distance from spindle nose to surface of base worktable 1220 mm Min. distance from spindle nose to surface of base worktable 320 mm Pjdpfx Aoh H Ediogwjrc Spindle taper MT 5# Spindle speed steps 16 step Spindle speed range 25~2000 r.p.m. Spindle feed steps 16 step Spindle feed range 0.04~3.2 mm/r Dimension of worktable 500x630 mm Arm length 2140 mm Power of main motor 4 Kw Machine dimension 2500x1060x2655 mm Net. Weight 3.50 Ton

Condition: good (used), Year of construction: 1975, bore capacity in steel (diameter) siehe Bild mm bore stroke 60 mm Drilling field Ø D on fixed drill insert 140 mm dimensions of the machine ca. 1,83 x 0,82 x 0,5 m --> With the Steinel BS 140 multi-spindle drilling machine you only need a fraction of the time fraction of the time compared to single-spindle drilling on normal drilling machines. drilling machines. --> Simple operation and maintenance speak in favour of the machine. --> The power of the motor makes it possible to drill 6 holes with a Ø 6 mm sharpened drilling tool to a depth of 7 - 8 mm in one go. The feed pressure to be applied depends on the operator. --> On the BS 140 multi-spindle drilling machine, the articulated drilling spindles are mounted in fixed drilling inserts. The central holder in the machine head corresponds to the Ø of the drilling field Translated with (free version) Pjdpewkvmusfx Agwjrc

Condition: ready for operation (used), Year of construction: 1986, arm 1250 mm, drilling capacity 55 mm, hydraulic locking Predoxdht Djpfx Agwec

Condition: like new (used), CNC vertical jig boring machine WMW MIKROMAT Travel X: 1120 mm Travel Y: 710 mm Spindle travel Z: 315 mm Travel W: 630 mm Numerical Command: CNC NUM 1060 Spindle: Ø 125 mm Predpfx Agjgy E Dpjwsc Cone: SA40 Rotation: from 36 to 2240 RPM Table size: 1400 x 900 mm Distance between colums: 1080 mm Maxi distance spindle nose/table: from 0 to 900 mm max Maxi eligible load on table: 1000 kg max Separate electrical panel Machine renewed in 2000 with CN NUM1060 Voltage: 380 V Dimensions (L x W x H): 4000 x 2460 x 3030 mm Weight: approx. 9 T

Condition: good (used), Year of construction: 2006, machine/vehicle number: 185078, Offer 24435 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 15 GL - Drilling capacity up to 18 mm - Tapping device up to M 10 - Drill spindle holder MK 2 - Drill spindle stroke with drilling depth fine adjustment 90 mm - Pneumatic feed unit PV 12 Predpsur H Ehsfx Agwoc - throat depth 670 mm - 4 spindle speeds 320 + 560 + 1000 + 1600 rpm - mot. Stroke of the drilling unit - Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar - 400 V connection - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg - various guide cartridges

Condition: new, bore capacity in steel (diameter) 32,0 mm arm length 310 - 820 mm workpiece height max. 370 - 870 mm Prodpfx Agexabrljwec turning speeds 75 - 1220 U/min spindle taper MT 4 MK base plate 825 x 690 mm threading 24 M quill stroke 250 mm quill feed 0,1/0,16/0,25 mm/U travel x / y 500 / 510 mm total power requirement 2,25 kW weight of the machine ca. 1200 kg. range L-W-H 1470 x 750 x 2100 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Condition: good (used), Year of construction: 1981, Dimensions (L/W/H) 660x1050x1600 mm metric thread M 33 Messing metric thread M 16 Gußeisen metric thread M 14 Stahl no. of flutes 25x10mm 2x T-Nuten throat 220 mm weight 730 kg Prodpoul Eg Dsfx Agwoc

Condition: used, Year of construction: 1990, machine/vehicle number: 187, Ref. No. 25219 Technical Data: - Drilling capacity in steel ST 60 approx.: 55 mm - Boring capacity (enlarging): approx. 80 mm Psdpfx Ajxbdbxsgwerc - Right/left-hand rotation - Spindle taper: MK 5 - Spindle stroke: 240 mm - Arm reach min. / max.: 320 / 2005 mm - Column diameter: 360 mm - Arm vertical travel: 855 mm - Min./max. distance spindle – base plate: approx. 550 – 1670 mm - Machined base plate clamping surface: approx. 1000 – 1700 mm - 12 spindle speeds: 30 – 1200 rpm - 8 feeds: 0.06 – 1.00 mm/rev - Spindle drive: 400 V / 5.5 kW - Electric central clamping - Cube table - Hydraulic vice RÖHM - Coolant system - Required space: approx. W 1120 x H 2850 x D 2990 mm - Weight: approx. 4800 kg

Condition: ready for operation (used), Year of construction: 1986, bore capacity in steel (diameter) 38.0 mm bore capacity in cast iron 45.0 mm arm length 415 - 1050 mm revolutions per minute 38 - 2000 U/min bore spindles - Morse Taper 4 MK feed range 0.05 - 0.45 mm/min quill stroke 170 mm table surface area 1200 x 560 mm T-slots 3 x 18 x 150 work height max. 800 mm Height adjustment of the drill spindle 200 - 650 mm threading M 28 / M 34 voltage 380 V total power requirement 1.5 / 3.0 kW Psdpfx Agoxablfowsrc weight of the machine ca. 1600 kg range L-W-H 1200 x 1600 x 1950 mm Machine from a vocational training center In good condition (!!) Features: - Compact design with electro-hydraulic quick clamping - Electric height adjustment - Automatic spindle feed - Heavy-duty / robust machine table - Thread cutting device - Pole-changing motor - Continuously variable speed adjustment * Including analog speed display - Machine base - 1x Machine vise - Emergency stop button at the front - Original operating instructions + machine card

Condition: good (used), Year of construction: 1985, spindle turning speed - stepless 26 - 1650 U/min voltage 380 V 0 50 Hz rated current 15 A connected load 6,5 kW tool taper MK 4 weight of the machine ca. 2,3 t dimensions of the machine ca. 1500 x 1200 x 2500 mm Operating voltage: 380 V Frequency: 50 Hz Prsdpfx Asvylh Uegwsc Control voltage: 220 V Rated current: 15 A Connection: 6.5 kW Automatic feed: 0.05 - 0.45 mm/rev Column lifting speed: 40 mm/s Column stroke: 450 mm Drilling spindle stroke: 200 mm Drilling zone: 430 - 1150 mm Height adjustment of the drilling spindle: 330 - 780 mm Tool holder: MK 4 Table dimensions: 1525 x 560 mm Table height: 800 mm

Condition: good (used), Year of construction: 2006, machine/vehicle number: 860027, Offer 24331 Technical data: - Table surface 1700 x 550 mm - manual travel X / Y 1300 x 500 mm - MAXION drilling machine, type: BT 18 STP - Drilling capacity up to 18 mm - Tapping device up to M 16 - Drill spindle holder MK 2 - Drill spindle stroke with fine drilling depth adjustment 76 mm - Pneumatic feed unit PV 12 - throat depth 670 mm - Spindle speeds 100 - 1800 rpm - 200 - 3600 rpm - mot. Stroke of the drilling unit - mot. Table clamping x + y - Minimum quantities Lubrication - Pneumatic connection 6 bar Predpfx Aju Aqz Aogwjc - Connection 400 V - Space requirement approx. W 1750 x H 1600 x D 1000 mm - Weight approx. 1200 kg

Condition: new, bore capacity in steel (diameter) 60,0 mm arm length 350 - 1.600 mm workpiece height max. 665 x 1.250 mm turning speeds 38 - 2.000 U/min spindle taper MT 5 MK base plate 960 x 1.760 mm threading 42 M quill stroke 325 mm total power requirement 4,0 kW weight of the machine ca. 3.800 kg. range L-W-H 2.600 x 1.100 x 2.770 mm scope of delivery : - Cube table - Drill chuck arbor MK 5 / B 16 - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - Frequency converter - Digital speed display - lift motor - hydraulic motor - Height-adjustable protective cover Psdpfexaa H Usx Agwerc - operating tool

Condition: used, Year of construction: 1998, machine/vehicle number: 1904, Lg.no. 23387 Technical data: Predpfx Ajuadilegwoc - Drilling capacity in steel ST 60 approx. 50 mm - Thread cutting up to approx. M 50 - Drill spindle holder MK 5 - Drill spindle stroke 300 mm - Projection min. / max. 320 / 1600 mm - Column diameter 320 mm - Boom stroke 650 mm - min / max - distance: - Spindle - base plate approx. 600 - 1250 mm - Machined base plate Clamping surface approx. 1000 - 1700 mm - 18 spindle speeds 40 - 1800 rpm - 8 feeds 0.04 - 0.63 m/rev - Drill spindle drive 400 V / 7.5 kW - E - Hydr. central clamping - Cube table with machine vice - Coolant device - Space requirement approx. W 2400 x H 2950 x D 1050 mm - Weight approx. 3500 kg

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 350 - 1.590 mm workpiece height max. 645 - 1.240 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 980 x 1.600 mm threading 42 M quill stroke 320 mm total power requirement 4,0 kW weight of the machine ca. 3.500 kg. range L-W-H 2450 x 980 x 2840 mm Description : Prodpjxaad Tefx Agwoc - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover

Year of construction: 1987, condition: good (used), machine/vehicle number: 3409, Lg.No. 17381 Technical data: - Drilling capacity 60 mm - throat 1600 mm - Drilling spindle holder MK 5 - drilling spindle stroke 390 mm - spindle speed, 20 steps 20 - 2000 rpm - right- left rotation - feed, 12 steps 0,056 - 2,5 mm/rev - drive 400 V / 12,8 kW - Clamping of boom and drilling unit electromechanical - Distance machined machine bed - drilling spindle sleeve - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm Pedpfjn D E Rpex Agwjrc - coolant device - cube table - space requirement approx. W 2600 x H 3000 x D 1000 mm - weight approx. 4500 kg

Condition: as good as new (ex-display), Year of construction: 2021, threading 30 M Predpfxexaadyj Agwjc bore capacity in steel (diameter) 40,0 mm workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1.210 x 520 mm quill stroke 200 mm feed range - spindle 0,08 - 0,5 mm/U total power requirement 2,2 kW weight of the machine ca. 2.800 kg. dimensions of the machine ca. 2,45 x 1,2 x 2,72 m characteristics - A variety of clamping and machining options thanks to the construction-related construction - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Condition: good (used), Year of construction: 1990, machine/vehicle number: 90650664, Offer 24402 Prjdpjuzvzxefx Agwsc Technical data: - Drilling capacity in steel 50 mm - Drill spindle holder MK 5 - Drill spindle stroke 315 mm - Projection min / max 350 / 1600 mm - Column diameter 350 mm - max. / min. distance - Spindle - base plate 350 - 1250 mm - Vertical stroke of the arm 580 mm - 16 spindle speeds 25 - 2000 rpm - Feed rates 0.04 - 3.2 m/rev - Drill spindle drive 400 V / 4 kW - Lift drive 1.5 kW - Column clamping 0.75 kW - Cube table - Coolant device - Space requirement approx. W 2490 x H 2645 x D 1060 mm - Weight approx. 3500 kg

Condition: used, Year of construction: 1984, machine/vehicle number: 84043, Order No. 20218 Technical Specifications: - Drilling capacity in wood: 40 mm - Drilling capacity in steel: 18 mm - Drill spindle mount: MT 2 - Spindle stroke: 120 mm - Drill spindle speeds continuously adjustable in steps: 60 - 2840 rpm - Max. distance between table and drill spindle: 600 mm Prjdpswf Iqnefx Agwsc - Boom/unit tiltable left and right by 45° each - Boom/unit pivotable left and right - Table size: 450 x 450 mm - Drive: 400 V / 0.33 / 0.55 kW - Space required: approx. W 500 x H 1870 x D 1200 mm - Weight: approx. 150 kg

Condition: used, Year of construction: 1986, machine/vehicle number: 101862, Order No.: 25096 Technical Specifications: - Drilling capacity in ST 60 steel: 60 mm - Drilling capacity for counterboring: 70 mm - Thread cutting with right-hand and left-hand rotation - Drill spindle mount: MT 5 - Drill spindle stroke: 300 mm - Throat depth: 1600 mm - Extension stroke: 650 mm - Min./max. distance between spindle and base plate: approx. 600 - 1250 mm - Machined base plate clamping area: W 780 - D 1500 mm Prsdpewhwxyofx Agwoc - Base plate / table height / foot height: 320 mm - 12 spindle speeds: 30 - 1330 rpm - 6 feed rates: 0.07 - 0.35 m/rev - Drill spindle drive: 400 V / 5.5 kW - Electric central clamping - 2 x cube tables: 750 x 570 x H 500 mm - Coolant system - Space requirement approx. W 1000 x H 2400 – 2900 x D 2450 mm - Weight approx. 4500 kg

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel 28 mm - Thread cutting device - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - Table dimension approx. 750 x 500 mm - projection up to approx. 620 mm - Vertical stroke of the boom 600 mm - column diameter 250 mm - spindle speeds in 12 switching steps 80 - 2800 rpm - 3 feeds 0,1 + 0,15 + 0,25 mm/rev - drilling spindle drive 400 V / 5,5 kW - cooling device Psdpfx Aob Ennksgwsrc - space requirement approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Instruction manual