Rapid Radial Drilling Machine

DONAU DR 32

Condition: good (used), functionality: fully functional, quill stroke: 190 mm, spindle speed (min.): 41 rpm, spindle speed (max.): 1,800 rpm, overall weight: 1,920 kg, workpiece weight (max.): 17 kg, sheet thickness steel (max.): 32 mm, torque: 250 Nm, table height: 900 mm, branded DONAU high speed radial drilling machine type DR 32 - completely overhauled by vaumatec in 2022 - with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain as well as 4 adjustable feet to relieve the table frame) Technical data: Drilling capacity into solid material: St 60/E335 mm Ø 32 (at feed rate 0.20 mm/rev): GG 22 mm Ø 45 Thread cutting: St 60/E355 M26 Thread cutting: GG22 M35 Tool holder: MK4 Column diameter: mm Ø 195 Distance between spindle nose and table: min./max. mm 260/660 Work table height: mm 900 Quill stroke: mm 190 Column stroke: mm 400 Spindle speeds Speed series I : rpm. 41-1800 Feed rates: mm/rev 0.1-0; 15-0; 20-0.3 Torque at the spindle: max. Nm 250 Ppjdpfxern Riqs Amkot Smooth running of the boom: Radial N 25 Smoothness of the arm: Axial N 25 Clamping effect: Radial Nm 3500 Clamping effect: Axial N 5500 Feed force: N 7500 Max. permissible mass: kg 17 Max. permissible moment of inertia: kgm 0.002176 Workpiece: max. table load: kg 1000 Center of gravity: in the middle of the work surface

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm Ppsdju Nc Rijpfx Amkjt control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: good (used), Machine type: Donau radial drilling machine DR 32 Year of manufacture: unknown MK 4 spindle taper Spindle speed: 41 – 1800 rpm Threading device Coolant pump Pedpfx Amey Tpq Eskspt Weight: approx. 2500 kg Drilling capacity in steel: 32 mm Table size: approx. 1200 x 600 mm

Condition: used, Year of construction: 1968, Donau high-speed radial drill type DR 32 Podpox Hgkvjfx Amkept Speed: 60 - 1800 rpm Arm reach: 600 mm Base plate: 100 x 1400 x 110 mm Thread cutting device Coolant system Machine lamp Quick-change holder with inserts Machine vice

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm Podou Et Nbspfx Amkspt - Drilling radius min / max 305 / 1005 mm - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: ready for operation (used), Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment. Psdpfx Ajykut Sjmkjpt

Condition: refurbished (used), Year of construction: 1980, Worktable 500mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant system Ppedpfxox N Ih Ie Amket Safety device at the drill Completely overhauled in 2026

Condition: new, Technical specification: Chamber volume: 1200 litres Working compartment: 1700 x 850 x 680 mm, Pjdpfjft Sr Dsx Amkopt Cleaning capacity: up to 30 m2 / h Weight 340 kg Power supply: 230V ~ / 50Hz Nominal working pressure: up to 12 bar Degree of cleaning: SA-3.0 (very deep and extensive corrosion) Air requirement: 1000 l / min (for 4.0 mm nozzle) Maximum air flow: up to 12,500 l / min Supported nozzle diameters: from 2 to 15 mm Grinding valve: CLEMCO Nozzle material: tungsten carbide Sight glass Dimensions: 220 x 730 [mm]. Work table load: up to 300 kg Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) Coating protection: Powder coating Working temperature: 10 to + 50 degrees Celsius Shared work table: Yes Inspection valve: Yes The picture shows an example for the configuration of the pressure blasting boiler SCP-1200-12 THE OFFER INCLUDES: Pressure blasting cabin Land Reko SCP-1200-12 Boron carbide nozzle: 2, 2.5, 3, 3.5 or 4 mm (optional) Protection leather gloves Holder for hanging details Foot control pedal Pneumatic connection CE Declaration of Conformity User manual in German language 24 months warranty for consumers 24 months guarantee for entrepreneurs Professional service after the warranty Device also available in leasing or financing Unit On order. Delivery time 4 weeks from order.

Condition: like new (used), Year of construction: 2005, Baublys BL 65 S / 500 NC Baublys BL 65 S / 500 NC, year of manufacture 2005, in very good original condition. The machine comes from the production of a renowned German mechanical engineering company. Technical Data Manufacturer: Baublys Model: BL 150 S/NC 500 Ppodpfsw Eytuox Amket Year of manufacture: 2005 Laser: 150 Watt Laser type: Q-switched, pulsed solid-state laser Laser medium: Nd:YAG Wavelength: 1064 nm Beam diameter: approx. 1.2 – 1.3 mm after output coupler mirror at TEM00 Beam divergence: 5 mrad TEM00 Pulse duration: CW / 90 ns Max. output power: 65 W multimode 16 W single mode Pulse energy: 16 mJ at 3 kHz Beam deflection system: Galvanometer system Line thickness (mixed mode): approx. 0.12 mm Deflection speed: 3 m/s; equivalent to 200 characters/sec with 1.5 mm height and single-line font Power Supply Voltage: 400 V, three-phase 50 Hz, 3 phases, clockwise rotating field Connection: 5-pin CEE plug, 16 A, 6h Max. power consumption: 8.5 kW, max. 16 A per phase Fusing: 3 x 16 A slow blow Water Connection Cooling water flow rate: 7.5 l/min at 20°C supply temperature Discharge connection: Thread G 3/4” male thread Heat load: approx. 6.5 kW Max. cooling water temperature at inlet: 20°C Water consumption: dependent on inlet temperature Outlet temperature:

Condition: used, Year of construction: 2023, controller manufacturer: Siemens, controller model: 840Dsl, _____ Description: Year of manuf. : 2023 Psdpoy E Ebqefx Amkept Control : Siemens 840Dsl Speed : 24000 rpm Movement X/Y/Z : 2600/1700/950 mm Tool holder : HSK-A63 Spindle: Technology:Swivelhead with Motospindle Speed:24.000 rpm Power (max.):15 kW Torque (max.):14,3 Nm Taper:HSK-A63 A-Axis:+/- 120° C-Axis:270° In general: Toolmagazine:18 stations Clampingsurface:2.350 x 1.700 mm Rapid travers in X/Y/Z:80/80/60 m/min Equipment/Accessory: Workpiecemeasurement:Touch probe, m&h RWP 20.50 Toolmeasurement:Laser, Hexagon Toolbreakagecontrol:Probe, m&h TS 35.20 Setup operations:Electronic Handwheel 3D-Extruder:CEAD S25 Granulatedryer-/conveyor:Vismec Further Accessory:Spindlechiller