Used Radial Arm Saw for sale (18,214)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, KASTOssb A2, year of manufacture 2008. Photos show the current condition; the machine is still being reconditioned. Technical data: - Cutting range round: 260 mm - Cutting range square (W x H): 260 x 260 mm - Smallest cuttable size: 10 x 10 mm - Shortest length of cut-off piece: 5 mm - Shortest remnant length in single cut: 110 mm - Length: 1670 mm - Width incl. chip conveyor: 2080 mm - Height: 2130 mm - Machine weight approx.: 2200 kg - Total connected load: 9.5 kW - Saw motor power: 5.5 kW - Continuously adjustable cutting speed: 15 – 125 m / min Hsdoxn Ix Uepfx Afisnu - Automatic material feed length, single stroke: 600 mm - Automatic material feed length, multiple stroke: 9999 mm - Saw blade dimensions: 4,115 x 41 x 1.3 mm

Year of construction: 1963, condition: used, MAS VR6A radial drilling machine Brand:MAS Model:VR6A Year:1963 Capacity (Kw):11 Voltage:380 Frequency (Hz):50 Dimensions LxWxH (mm):3200 x 1100 x 3000 Weight (Kg) approx:6500 Boom :2000 mm Cube table dimensions (mm):1250 x 800 x 500 Spindle :MK5 Hnsdob D A I Tjpfx Afiju Including machine vice and cooling system The machine is in a used but good condition Original documents are available.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Hodpjxn A Spefx Afienu Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: good (used), Year of construction: 2018, saw blade diameter 350 x 32 mm capacity 90 degrees: round 115 mm capacity 90 degrees: square 100 mm Hnsdpfx Afsxn Anwoiju capacity 90 degrees: flat 1 x 80 mm capacity 45 degrees: round 100 mm links capacity 45 degrees: round 75.0 mm rechts

Condition: good (used), Year of construction: 2003, functionality: fully functional, Specifications: Cutting speed, infinitely variable: 20 - 90 m/min Hedpexn Andofx Afionu Saw band: 3850 x 27 x 0.9 mm Cutting range: rectangular 90°: 360 x 305 mm rectangular 45°: 265 x 300 mm rectangular 30°: 175 x 300 mm

Condition: excellent (used), Catalogue number: 7782 Hjdpfx Ajxnyqcsfienu TECHNICAL DATA Wheel diameter: 630mm Table dimensions: 890x700mm Table angle adjustable Motor: 3kW Band width: 20-40mm Max cutting height: 320mm Throat (band to body): 580mm Extraction nozzle diameter: 100mm Dimensions (L/W/H): 1200x800x2250mm Weight: 686kg ADVANTAGES – Polish production – DTR documentation – Very good condition – Used saw Net price: 6,500 PLN Net price: 1,530 EUR depending on the rate 4.25 EUR (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2022, machine/vehicle number: 8535-7-9576-FA, Hexagon Absolute Arm V2P 8535 7 axis 3D Portable Measuring Arm (2022) complete with Hjdpfxsxnx Aks Afionu 7-Axis Arm with 3.5m measuring volume and CP-W wireless pack AS1 IP laser scanner for scanning in standard mode or in compact mode MST139 portable precision aluminium tripod and MAS54 tripod padded bag HP-T-EF touch trigger probe kit Leap frog kit with 4x magnets This lot is located in Craiova, Romania

Year of construction: 1965, condition: good (used), Radial drilling machine BR 56 x 1600 Hnsdpfx Afod R Sh Rjiju Year built: approx. 1965 (estimate) equipped with coolant device and drilling table as special accessories Technical data: see data sheet as appendix

Condition: good (used), Code: 0228 Brand: OMS SALVARANI Hjdsxnxumspfx Afionu Model: 300 INVINCIBILE Pneumatic double croscutting machine for cutting wood, frames, fixtures, joinery, furniture, and various other materials Technical data: Working length mm 3000 Blade diameter mm 300 Motor power Hp 2,5 - Rpm 3000 Manual movement of the 2 heads Cutting from 0 to 45° right and left Pneumatic pedal for lowering the heads N° 2 pneumatic clamps for locking workpieces N° 2 suction ports diameter mm 50 Compressed air 6 bar Overall dimensions mm 4000 x 700 x 1250 h Weight kg 520

Condition: ready for operation (used), Year of construction: 1991, cutting diameter 220 mm capacity 90 degrees: square 220 x 220 mm turning speed range: 20 - 140 m/min saw band length 3720 x 34 x 1.1 mm height of material-table 825 mm coolant capacity 80.0 l total power requirement 2.5 / 3.5 kW Hodpsxab R Usfx Afisnu weight of the machine ca. 1500 kg range L-W-H 2350 x 2050 x 1500 mm - in checked conditions - machinevideo - ?v=joc0EbemYC8 Equipment: - electro-hydraulic band saw - FULLY AUTOMATIC - for sawing hollow profiles and solid materials made of steel, stainless steel, . tool steel, non-ferrous metals and plastic - control panel on the front right * including button for manual operation (setup/individual cut) - electro-hydraulic material clamping - stepless cutting speed .. 20-140 m/min. - electro-motor chip conveyor - manual adjustment of the material feed range * via handwheel including analogue value display - automatic height adjustment of the saw frame * including device for material detection (start of cut) - coolant device

Condition: good (used), Year of construction: 1992, functionality: fully functional, cutting height (max.): 130 mm, cutting length (max.): 400 mm, overall weight: 1,400 kg, Monitored saw blade cover; cuts at 90° profile height 130 mm and profile width 400 mm, at 45° = 130 x 280 mm at 30° = 130 x 195 mm. Acute angle cutting at 30° right and left. - hydraulic material clamping vertically and horizontally - hydraulic stepless saw feed - clamping pressure adjustment - original Trennjaeger stops are available. . Hnodpfx Ajxnzf Usfiju

Condition: used, -Saw blade Ø 350 mm -speed 130 m/min -with cooling device Hedpfxjbwmxxj Afionu -total weight 1200 kg

Year of construction: 1978, condition: used, horiz. Band saw, make Bauer, type S260, year 1978 Hnjdpfx Aobwg A Sefiou

Condition: repair required (used), Witzig & Frank high-speed radial drilling machine LEO 32 AS Hsdetrnr Tjpfx Afienu Defects: (Clamping no longer works, running noises present)

Condition: good (used), branded types - circular saw, make Gema, type HGB Accessories: Vice Hjdeu T N T Aepfx Afisnu

Condition: good (used), Year of construction: 2008, Cutting range 90° 670 x 670 Technical data Material feed length (single stroke): 2000 mm Saw blade dimensions: 8450 x 67 x 1.6 mm Saw blade speed: steplessly adjustable: 15–120 m/min Cutting speed: steplessly adjustable: 5–1200 mm/min Band drive motor, 11 kW, frequency-controlled Total connected load: 18 kW Positioning accuracy: ± 0.01 mm Hnedpfx Afowwlqcsieu Indexing speed: 200 mm/s Minimum sawing diameter: 25 mm Material passage: 850 mm Overall dimensions (XL-3000 version): 5600 x 4420 x 3070 mm Weight (approx.): 9300 kg

Year of construction: 1994, condition: good (used), 1. used automatic bandsaw, make Behringer, type HBP303A / CNC-AFC, year 1994 - CNC control for fully automatic working process - cutting range at 90° around 300 mm - flat 300 x 300 mm - smallest material dimension round / flat 15 / 10 x 15 mm - smallest cut-off length 10 mm - rest piece length automatic mode / manual approx. 90 / 40 mm Hnodpofn Tn Tsfx Afisu - saw band dimension 4640 x 41 x 1,3 mm - cutting speed infinitely variable 19 - 130 m/min - cutting pressure infinitely variable 0 - 10 m/min - Hydr. material clamping with clamping pressure regulation - coolant device - Total drive power 400 V / 7,0 kW - weight approx. 2500 kg - Operating instructions

Condition: excellent (used), Year of construction: 1993, burnt V. band saw make Bauer (with only approx. 50 operating hours) Hsdjg E Ugtepfx Afijnu incl. welding device for the bandsaw blades saw band rolls diameter 400 mm saw band length 3000 mm table size 520 x 470 mm dimensions: 600 x 700 x 1800 mm weight approx. 280 kg

Condition: excellent (used), V. Bandsaw, manufactured by Elektra Beckum, type BAS 315/4 Hnodpfx Afsvbf Svjieu Year of manufacture: 1994 throat 315 mm Saw blade length: 2240mm Voltage: 220V Cutting depth: 170mm Accessories: Saw bands, length stop, angle adjustment for miter cuts

Condition: good (used), Year of construction: 2010, Technical data: Maximum diameter: 280 mm Maximum rectangular dimensions: 300×280 mm Hnedswvu U Uepfx Afieu Maximum bundle dimensions: 250×100 mm The DoALL NC-Line is a range of machines designed and built for general sawing operations in manual or automatic mode. For ease of operation, these machines are standard-equipped with a 2-meter roller table, a chip conveyor, variable clamping force adjustment, a double retractable index vise, a work light, and a toolbox. PLC control for all electrical and hydraulic functions. Color touchscreen control panel with alarm notifications Infinitely variable blade speed, controlled by an inverter Flywheel motion detector with blade jam and band breakage switch Automatic shuttle-type feed and movable roller table Hydraulic blade tensioning Two-stage rapid lift clamping devices Split front vise Double retractable index vise Work height sensor and quick-approach function Carbide guides with roller bearings Nesting device and vertical rollers for bundle cutting Length adjustment: magnetic scale 20 preset work programs Automatic chip conveyor Motorized band brush (Roller conveyor available as an option upon request)

Year of construction: 1999, condition: good (used), Cutting range at 90°: Round: 305 mm, square flat 360 x 305 mm Cutting range at 60°: Round: 305 mm, square flat 330 x 305 mm Cutting range at 45°: Round: 265 mm, square flat 265 x 300 mm Cutting range at 30°: Hnodpfx Ajifk Nlefisu Round: 175 mm, square flat 175 x 300 mm

Condition: good (used), Year of construction: 1985, Behringer HBP 500 A Bandsaw Machine, Year of manufacture: 1985 Hnjdpfsw Dqn Tjx Afisu Technical Specifications: Maximum cutting capacity (round): 500 mm diameter Maximum cutting capacity (square): 500 × 500 mm Cutting length (feed length): approx. 600 mm per single stroke, multiple strokes up to 5,999 mm Saw band length: 6,900 mm Band width: 38 mm Motor power: 5 kW main drive Weight: approx. 4,000 kg (4.2 t – 4.3 t) Dimensions (L × W × H): 3,500 × 2,300 × 2,200 mm Machine type: 2-column guide, hydraulic band tensioning (Roller conveyors available optionally upon request)

Year of construction: 2014, condition: good (used), The machine is from year of manufacture 2014/6 (demonstration machine) Commissioning was in 2017 Cutting range round - 75 mm Rectangle - 60 mm Saw blade dimension ø 285 x 2,0(T) x 1,7 (t) mm T = waste; t = thickness ; bore 32; 4x11 at 63 mm Blade speed inverter monitored 30- 150 rpm blade motor 7,5 kW Hydraulic system 1,5 kW Coolant system Oil mist lubrication Blade feed system servo motor & ball screw material support 1.200 x 5.200 mm Bar feed system: servo motor and ball screw Automatic index single stroke 6 - 600 mm Multiple stroke up to 3.000 mm Automatic chip conveyor Chain conveyor Machine weight, incl. table 2.800 kg Length tolerance +/- 0,1 mm Cutting accuracy +/- 0,1 mm Remaining piece standard 75 mm Loading capacity 13 x ø 75 mm bars Hodpfx Ash Awzmjfionu Max loading width. 1.000 mm Accessories: chip conveyor, air cleaning, loading magazine (still under power in production)

Year of construction: 2012, condition: excellent (used), Bernardo technical data Cutting range round 90° 125 mm Cutting range flat 90° 100 x 150 mm Cutting range round 45° 95 mm Cutting range flat 45° 95 x 76 mm Cutting range round 60° 50 mm Cutting area flat 60° 50 x 56 mm Hnsdpfomkimhox Afisu working height 730 mm Saw blade dimension 1638 x 13 x 0,65 mm cutting speeds 23 / 34 / 54 m/min motor output power S1 100% 0,55 kW motor input power S6 40% 0,75 kW Voltage 230 V Machine dimension (L x W x H) 1000 x 550 x 1100 mm Weight approx.68 kg

Condition: good (used), Pehaka brand, type ROB 400 S Hnsdpfxeu Iynco Afiju Automatic machine Capacity 450 mm Hydraulic lowering Machine size (LxWxH) 2,700 x 1,100 x 1,000 mm