Used Benford 4000 for sale (2,431)

Condition: ready for operation (used), Wingspan: 3950 mm Rcodezp Iqgepfx Amyjd Overall height: 3650 mm Load capacity: 4000 kg without lifting device

Condition: excellent (used), The DAGE Series 4000 Bond Tester is a professional device designed for performing Bond Pull and Die Shear tests in the semiconductor and electronics industries. This device is used in quality control laboratories, research and development departments, and during the production of microelectronic components. This unit is equipped with a precision positioning table, joystick controls, a keypad panel, and work lighting. The set also includes the original PCI control card (Baldor NextMove PCI-2 Motion Control Card) and additional electronic components visible in the photos, which are a valuable addition to the set. Technical data: Manufacturer: DAGE (Nordson DAGE) Model: DAGE Series 4000 Bond Tester Year of manufacture: 2010 Power supply: 110 / 230 V AC, 1-phase Frequency: 50/60 Hz Power: 250 VA Control: joysticks and keypad Precision XY positioning table Rsdozma Tbopfx Amyocd Required compressed air: 4 bar (oil-free) Vacuum connection Excellent visual condition. The set being sold is consistent with the presented photos and includes all visible components, including the additional PCI control card.

Condition: excellent (used), DAGE Series 4000 PXY – Bond Tester / Shear & Pull Tester for Connection Strength Testing Rcedpfxszma Sko Amyod

Condition: new, New motor from renowned German manufacturer Baumüller Nürnberg. The motor is unused, warehouse stock (old stock). No signs of operation. Technical data – from nameplate: • Manufacturer: Baumüller Nürnberg GmbH • Type: GNA 132 MV • Supply voltage: 400 V • Current: 39 A • Power: 12 kW • Rotational speed: 1260–4000 rpm • Excitation voltage: 310–365 V Rcodoyga Ugepfx Amyjd • Excitation current: 0.17–0.38 A • Insulation class: F • Protection class: IP23 • Standard: VDE 0530 • Serial number: 88104349 The motor is intended for automation, CNC, special machine applications, and as a spare part for existing Baumüller drive systems. Price quoted per unit.

Year of construction: 2017, condition: like new (used), Set for robotic laser welding Scope of supply: 1 x IPG YLS-4000 4KW output laser (2017). Fiber core 300 microns and 30 meter length, LCA LCA. Optical coupler inside. Profinet interface. Power ON work time : 32832 hours 1 x IPG CHILLER.(2017). Redsrfucqjpfx Amyjcd 1 x HIGHYAG BIMO LASER WELDING HEAD with air knife. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year of construction: 2004, functionality: fully functional, overall weight: 9,200 kg, chuck outer diameter: 920 mm, through hole: 254 mm, total height: 2,000 mm, total length: 6,000 mm, total width: 2,000 mm, HEAVY DUTY, FLAT BED CNC LATHE WITH HARDENED & GROUND BOX GUIDEWAYS & 254 MM SPINDLE BORE SUITABLE FOR OIL COUNTRY APPLICATIONS. REAR 254 MM DIAMETER 4-JAW INDEPENDENT CHUCK, DUPLOMATIC V8 ELECTRIC AUTO TOOLPOST, COOLANT AND LIGHTING, FULL LENGTH REAR CHIP GUARD & SLIDING FRONT DOOR, 250 to 450 MM DIAMETER 3 POINT ROLLER STEADY REST, PREPARATION FOR FITTING OF BORING ATTACHMENT, STANDARD ACCESSORIES. CE MARKED MACHINE Rcedpfxszq Adkj Amyed

Condition: good (used), Year of construction: 1994, Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Gubisch, driven roller conveyor type RF 4.0 -Drive motor: Lenze 0.37 kW with variable gearbox -Speed: 9 to 45 m/min -Roller width: 250 mm -Roller diameter: 83 mm -Axle spacing: 130 mm Rcjdpfszq Abcsx Amyjd -Conveyor length: approx. 4000 mm -Base: height adjustable -Dimensions: 4000/360/H1050 mm -Weight: 328 kg

Condition: used, Year of construction: 2021, machine/vehicle number: ET235, Used Sleever labelling machine 4000 BPHTechnical Specifications & Performance DataThe ULISSE 4000 is an automatic sleeving labeling machine engineered by Scaligera for high-quality application of shrink sleeves on cylindrical containers. Built in 2021, this second hand equipment is designed for integration in a used bottling line and industrial packaging environments for beverage production. Its robust AISI 304 stainless steel construction, Omron automation, and precision cutting system ensure repeatable, accurate sleeve placement prior to steam shrink.Manufacturer: ScaligeraModel: ULISSE 4000Year: 2021Formats: 330ml standard, 440ml standard, 500ml standard (CAN)Machine type: Automatic sleeve applicator (Labeling Machine)Installed electrical power (applicator): 3 kWCompressed air consumption (applicator): 80 Nl/minControl system: PLC Omron with 7-inch color touchscreen HMICutting system: 1 rotating-blade cutting head, register-controlledMaterials: AISI 304 stainless steel frame and guards; anodized aluminum and chromed steel componentsIncluded conveyor: Scaligera K325, approx. 7.5 m total length, chain 82.5 mm, inverter-drivenShrink tunnel (included): Scaligera TVP3SE steam tunnel, 3 independent steam sections, 6 injection cells, electronic temperature control, inverter-driven exhaust, installed electrical power: 11 kW, minimum steam pressure: 5 barRotary accumulation table (included): Ø 1200 mm, power: 0.5 kWElectric steam boiler (included): COMETH GEI 54 KW 75, 3 × 25 kW resistors, 380 V 50 Hz, steam output approx. 100 kg/h, stainless steel water tank approx. 80 L, capacity approx. 60 LSafety: CE-compliant interlocked guards and protectionsAdvanced Automation & Control SystemsThe ULISSE 4000 integrates advanced automation to optimize sleeve application accuracy and uptime. The external unwind with mechanical dancer ensures stable film tension. Motorized traction rollers launch the sleeve at high speed, with automatic opening and adjustment. Film length is photoelectrically controlled and synchronized to product presence for precise register cutting. Operators interact through a 7-inch color touchscreen HMI with Omron PLC control, enabling recipe management and quick parameter adjustments.Automatic sleeve advance and register-controlled cuttingMotorized rollers with automatic opening and regulationPhotocells for film length regulation, infeed product absence, and outfeed jam detectionMicrometric adjustment handwheels with counters for repeatable settingsInterlocked safety doors and CE-compliant protectionsProduction Line Integration CapabilitiesThis sleeving machine is supplied with a matched steam shrink solution and conveying to facilitate rapid integration in a used bottling line or standalone industrial packaging cell. T... Rcodpfx Asy Ef Tmomysd

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Technical specifications for the bale opening line for RDF, MSW, paper, and cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Type: BO 4000 Year of construction: 2015 Number of bales opened: 674 Operating time: only 3 days, exclusively during the initial commissioning of the entire system upon new installation Opening time: approximately 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400 – 1900 mm Max. bale weight: 2,000 kg System conveying height: 1,400 mm Max. system conveying width: 1,200 mm Material to be opened: RDF/MSW System availability: 98% Noise level of the bale opening line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Control panel: SIEMENS SIMATIC HMI Touch Controller: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: Infeed conveyor: 3,500 x 1,200 x 1,400 mm Feed conveyor to the opener: 1,500 x 1,200 x 1,400 mm Bale opener (gripper with knife) Special equipment: Oil heating in the hydraulic oil tank Control cabinet heating Oil cooler for hydraulic unit Explanation for the short operating time: The entire Cross Wrap bale opening line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The reason for installing the system was to ensure that municipal waste could continue to be accepted, compressed, wrapped, and stored even during an operational disruption or maintenance of the incineration plant until the disruption was resolved. Subsequently, all the bales were to be opened again, and the waste fed into the normal incineration process. Rsdpfezp H R Eex Amyjcd This worst-case scenario never occurred. The system was installed, commissioned, and then never used in normal operation. Only during the commissioning and initial operation of the entire system in 2015 were 674 bales opened over three days. The system is in very good condition and is immediately ready for operation. Due to restructuring measures in the incineration plant, the installation space of the bale opener was needed. This means that the complete line is now available for sale. Brief description of the bale opening process: The compressed bales are placed on the infeed conveyor from the side or from the rear using a forklift. To open the bales, they must be positioned horizontally to the conveyor with the wire or twine binding; otherwise, the bales must be rotated by 90° beforehand. The opening conveyor brings one bale at a time in front of the cutting unit. The grippers hold the wires or the twine binding. The rotating knife cuts the bale lengthwise. After that, the gripper returns to its starting position. The opened bale is now conveyed via the conveyor to the discharge chute and then falls onto the subsequent conveyor system. Remarks: New price of the complete system: €296,000. The documentation (operating manual, CE declaration, electrical/hydraulic circuit diagram) is complete. The system has been dismantled into transportable units, stored, and is available for inspection and loading in the short term. We assume no liability for the technical data or any potential errors.

Condition: excellent (used), Year of construction: 2020, Maximum turning diameter 3800 mm Maximum swing diameter 3800 mm diameter of spindle flange 1900 mm control Siemens 840 D sl Table rpm 100 1/min Maximum speed of driven tools 6000 1/min x-travel 2800/3200 mm z-travel 1000 mm Feed - X 20 m/min feed capacity - x 22 kN tool taper CAPTO C8 total power requirement 280 kVA dimensions of the machine ca. 10,4 x 6.3 x 5,7 m weight of the machine ca. 155 t Equipment/Accessories: - 2 tool changers, each with 60 positions - 2 x chip conveyors - Coolant system, 6 bar - High-pressure cooling, 70 bar - Knoll paper belt filter Rcodpfjzpzblex Amysd - 12-jaw balancing chuck, RÖHM - internal coolant supply - Hydraulic unit - Automatic door - Electric handwheel - Technical documentation

Condition: excellent (used), Year of construction: 1995, x-travel 14000 mm y-travel 5000 mm z-travel 1500 mm w-axis 3000 mm column daylight 4000 mm column: max. dist. table - spindle nose 4500 mm workpiece weight 100 t table dimension - longitudinal 9000 mm table dimension - cross 3000 mm spindle taper ISO SK 50 spindle turning speed range 2-2500 U/min spindle motor 113 kW spindle diameter 200 mm max. torque on the spindle 9500 Nm feed in x - axis 1-10000 mm/min feed in y - axis 1-10000 mm/min feed range Z-direction 1-10000 mm/min rapid traverse 20000 mm/min height over floor 8600 mm control SIEMENS 840C weight of the machine ca. 360 t ATTACHMENTS angular milling head yes autom. tool clamping yes ball spindles yes guideway covers yes coolant unit yes high pressure cooling syst. (through spindle) yes closed cabin yes chip conveyor yes TECHNICAL DESCRIPTION 2 portal milling centres, each with 3 table pallets 9000 x 3000 mm: - Tool changer with 420 tools - Head pick-up system Redpfx Amjvwgm Hoyjcd - Video monitoring via camera - High pressure lubrication unit for inner cooling 70bar AVAILABLE HEAD UNITS: - Fixed angle head HS800C600 105 Kw 600 long - Fixed angle head HSD350C850 50 Kw 850 long - Fixed angle head HSD 40C880 12 Kw 880 long - Fixed angle head HSD 190C1000 30 Kw 1000 long - Vertical spindle unit VS800C 105 Kw 900 long - Universal spindle unit USIO40C 20 Kw B-axis rotatable at 1° at a time - Angle spindle unit SO800C905 - 22,5° fix - Angle spindle unit HSE1200CS -25° fix - Universal spindle unit (fork milling) USP475C 75 Kw 1/2° Hirth --> 1.350 1/min , B-Achse 0,5 Grad Hirth One additional drilling extension SE 350C plus 1 SE500C. DESCRIPTION OF CONDITION In 2011/2012 these 2 identical machines were retrofitted The milling length was extended to 14meters and an automatic changing system for table pallets was installed. Both machines can be seen under power by prior appointment.

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F table dimension - longitudinal 4000 mm table dimension - cross 1600 mm Rcjdpfeym D E Ajx Amyod total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Rcodpezqfhrefx Amysd Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 001, cutting length (max.): 5,000 mm, Offered is an automatic edge trimming line with singulation, trimmer for cross-cutting, 2 stacking machines, additional discharge, and trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at the joystick: - Cross-transfer of boards with a 4-strand chain cross conveyor - Singulation inclined conveyor 6000 mm wide, 3000 mm at an angle - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turners and sorters before the trimmer - Edge detection (ALFHA edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick evaluates: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - cut length 505 mm for the underlying vibration trough - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - Automatic lowering of finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control system with Siemens S 7 - ensures perfect operation. Performance records/daily logs Rcedpfoy Uzhfox Amyjd - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee, processing side boards of 4000/17 x 76 mm, produced, packaged, and strapped approximately 15,000 boards in 9 hours. The system is still assembled, but the upstream chipper has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. We can provide a process video via WhatsApp!

Year of construction: 2002, condition: used, machine/vehicle number: 001, Description Offered is an automated side board processing line with singulation, trimmer for end trimming, 2 stacking machines, additional discharge, and end trimming of stacking slats: Boards 2000-5280 mm long, 16 - 40 mm thick, 70 - 260 mm wide, cycle rate of 29 or 58 pieces/minute, operated by one person sitting at a joystick: - Boards are conveyed laterally using a 4-strand overhead chain cross conveyor - Singulation steep conveyor 6000 mm wide, 3000 mm inclined - Alignment roller conveyor - Chain cross conveyor as a layer former - Star turner and sorter before the trimmer Nlewsy Uzhfj D A Tmcob - Edge detection (ALFHA-Edger) - Trimmer with 11 saws in a 50.5 cm grid: The operator (sitting) at the joystick assesses: without re-trimming, 5000 mm to stacking machine 1, alternatively: without re-trimming, 4000 mm to stacking machine 1 Rcsdpfx Aey Uzldemysd with re-trimming, 4000 mm to stacking machine 2 with re-trimming, 3000 mm to stacking machine 2 with re-trimming, short lengths for discharge into a box, with re-trimming, short lengths for discharge into a box with re-trimming, 2 or 3 x 101 cm for stacking slats, with re-trimming, 2 or 3 x 101 cm for stacking slats or waste cut - trimming length 505 mm for the underlying vibration channel - 2 stacking machines: 1 x 2500 to 5280 mm and 1 x 2000 to 4280 mm - automatic lowering of the finished packages and transfer to automatic strapping - FROMM strapping with 16 mm plastic band and automatic transfer to the discharge roller conveyor - ALFHA control with Siemens S 7 - ensures perfect operation. Performance records / daily logs - Control cabinets with Siemens components, SEW motors, Telco light barriers For example, one employee processed, packaged, and strapped approximately 15,000 boards of side lumber 4000/17 x 76 mm in 9 hours. The system is still assembled, but the upstream chipping plant has already been dismantled. Therefore, the system is immediately available. It is very robustly built and has always operated smoothly and without any problems. A video of the process can be shown via WhatsApp!

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal Rodszndq Hepfx Amyocd - machine documentation (NL)

Condition: used, Year of construction: 1999, cutting width 3000 mm Numbers of torche 1 Rodozmy Tbspfx Amyscd Cutting system Plasma PA-S 150 total power requirement 4,5 kVA weight of the machine ca. ca. 8-12 t required space 16000 x 5000 mm

Condition: good (used), Technical specifications: Machine weight: 19,400 kg Total machine power consumption: 18 kW Rjdpfx Amezpx Hroyecd Max. grinding diameter: 630 mm Distance between centers: 4,000 mm Max. workpiece weight: 2,500 kg

Condition: used, Year of construction: 2009, CNC Portal Plasma Cutting Machine Rcodezmv Dcepfx Amyjd Manufacturer: Messer Type: Multitherm 4000 Year of Manufacture: 2009 CNC Control: Global Control Plus Track width: 4,000 mm 2 x Plasma with Hypertherm HPR260 power source Travel length: 10 m 2 x oscillating conveying tables Size: 3 x 3 m each Without filter system 22726ä

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 4,963 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,950 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,350 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 23X10-12, rear tire type: superelastic tires (black), rear tire size: 355X45-15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,300 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🛠️ Years of Experience | 🧰 In-house Service & Paint Shop | 🤝 Expert Consultation | 🚛 Own Transport Fleet | 🔧 Comprehensive After-sales Support Looking for a forklift you can truly rely on? We are a reputable dealer of new and used forklifts, serving the industry for many years. Our customer base spans all of Europe—from small businesses to major industrial facilities. Our forklifts are more than just equipment—they are your assurance of seamless and dependable logistics. -- What sets us apart? -- ✅ Every forklift undergoes a thorough technical inspection and servicing (including checks, tests, oil & filter changes, and component refurbishment) ✅ Full UDT (Office of Technical Inspection) certification available on request ✅ In-house paint and service workshop—machines are optimized both technically and aesthetically ✅ Pan-European delivery—provided by our skilled drivers ✅ Operator training and on-site machine demonstration at handover ✅ Ongoing after-sales technical support—we stay connected post-purchase ✅ On-site viewing and test drives welcomed at our facility ✅ Hundreds of satisfied customers throughout Europe—become one of them today ✅ Financing options available—we collaborate with leading leasing providers ✅ Invoicing in EUR or PLN—as per your preference Rcjdpfxjzphv As Amyod -- FOR SALE -- COMBILIFT C5000 – Four-Way Forklift Truck 📅 Year of manufacture: 2015 ⏱️ Operating hours: 4,963 h 🔋 Propulsion: GAS / LPG 📦 Load capacity: 5,000 kg 📏 Mast: Duplex – 4,000 mm lift height 🔩 Fork positioner – width: 1,350 mm | Forks: 1,200 mm 🛞 Superelastic tires – 100% condition 🧪 Technical condition: Excellent – fully serviced 🎨 Visual condition: Clean, corrosion-free, and ready for work 📐 Dimensions: - Lowered mast height: 2,600 mm - Total length: 2,500 mm - Overall width: 2,300 mm - Fork positioner width: 1,350 mm - Overall height: 2,950 mm -- Ideal for: -- 🏭 Narrow-aisle warehouse applications 🌲 Timber, steel, and pipe handling industries 📏 Handling long and bulky loads 🏗️ Both indoor and outdoor operations -- FT Logistics – Quality you can depend on. Service you can trust. --

Condition: used, Year of construction: 1998, Transnorm Rising falling Incline belt conveyor with leading belt GF 25000+4000-1000-900 RA2288 Technical data: Conveyor length (NL): 29000 mm ( 25000 mm riser segment + 4000 mm forerun) frame width (NB): 1000 mm, 1100 mm with motor belt width (GuB): 900 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): 0,2 Drive: SEW gear motor, Electrical data: 50Hz V380-500, kW2,2 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Rjdpfxetp Tv Ej Amyocd Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), fuel type: diesel, fuel: diesel, Equipment: additional headlights, airbag, differential lock, electric window regulation, trailer coupling, TLF 3000 All-Wheel Drive on Off-Road MAN TGM 13.320 All-Wheel Chassis Now with increased engine power! Ideally suited for small and medium-sized fire brigades in rural areas that require a compact and robust vehicle capable of handling a wide range of tasks while also needing a large water supply. Chassis: MAN TGM 13.320 4x4 EURO 6 with 320 HP (235 kW), automated transmission Single tires with same track width for superior off-road capability Cab: Standard crew cab (1:5) in RAL 3000 (fire red) Air conditioning and auxiliary heater Standard 4 SCBA mounts in the crew compartment Body: High-quality frame construction using rust and corrosion-free materials Folding steps at each side equipment compartment Individually customized stainless steel equipment storage Walkable, non-slip vehicle roof Pump/Extinguishing Media Tank: Maintenance-free combined normal/high pressure pump FPN 2000-10 PUMP&ROLL capable Output: 2,000 l/min at 10 bar and 400 l/min at 40 bar Integrated, stepless foam proportioning system 4,000 l water tank with integrated 400 l foam agent tank Additional heating in pump compartment Firefighting Features: High-pressure rapid attack system with 50 m rigid hose Foam/water monitor (2,000 l/min) on the roof Self-protection system with 4 spray nozzles in front of the wheels Safety and Lighting: LED lightbar on the roof / 2 LED front flashers Pneumatic Martin-horn special signaling system 100 W loudspeaker system with PA unit Rjdpfsy Hqlkjx Amyjcd Rear-view camera Comprehensive LED lighting in crew and all equipment compartments LED area lighting and auxiliary white lights on the body Pneumatic LED light mast with remote control Optional hygiene board We would be pleased to provide you with a detailed offer and comprehensive demonstration of the vehicle at our Berlin location. All information provided to the best of our knowledge, without guarantee for completeness or accuracy. This advertisement does not constitute an offer, but serves as information only. Subject to prior sale!

Condition: new, functionality: fully functional, power: 235.36 kW (320.00 HP), axle configuration: 4x4, fuel: diesel, color: red, gearing type: semi-automatic, emission class: euro6, Year of construction: 2025, Equipment: air conditioning, airbag, all wheel drive, central locking, differential lock, trailer coupling, From our portfolio of new vehicles, we offer: TLF 4000 All-wheel drive on an off-road MAN TGM 18.320 all-wheel chassis Our Water Buffalo on MAN Hardly any terrain is too difficult for it. Calm and powerful, it reliably delivers its load to the destination. At the incident site, it demonstrates its full capabilities—transporting crew, equipment, and sufficient extinguishing agents to the scene, supported by a high-performance pump. Chassis: • MAN TGM 18.320 4x4 EURO 6 with 320 HP (235 kW) • Automated transmission • Off-road tires • Single wide tires matched to track width for maximum off-road capability Cab: • Standard crew cab (1+5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater Rodsxzu Ehopfx Amyscd • Standard 4 SCBA mounts in the crew compartment Superstructure: • High-quality frame-style superstructure made from stainless and corrosion-resistant materials • Folding steps for each side-mounted equipment compartment • Individually customised stainless steel equipment storage solutions • Walkable, non-slip vehicle roof Vehicle pump / Extinguishing agent tank: • Maintenance-free combined normal/high-pressure pump TITAN S40HP FPN 4000-10 • PUMP & ROLL capable • Output: 4,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely variable foam proportioning system • Water tank 5,000 l with integrated 500 l foam agent tank • Auxiliary heater in the pump compartment Firefighting equipment: • High-pressure rapid intervention reel with 50 m rigid hose • Roof-mounted foam/water monitor, 2,000 l/min • Self-protection system with 4 spray nozzles in front of the wheels Safety and lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system Martin-Horn • 100 W PA system with announcement unit • Rear-view camera • Comprehensive LED lighting in crew and all equipment compartments • LED scene lighting on the superstructure and additional spotlight • Pneumatic LED light mast with remote control • Hygiene board available on request We would be happy to provide you with a detailed offer and present the vehicle to you at our site in Berlin. All details provided to the best of our knowledge and belief, without guarantee for completeness or accuracy. This advertisement constitutes information and is not a binding offer. Subject to prior sale!

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, parking heater, trailer coupling, From our range of new vehicles, we offer you: TLF 3000 All-Wheel Drive on a rugged MAN TGM 13.290 4x4 Off-road Chassis This vehicle is ideal for small and medium-sized fire departments in rural areas looking for a compact and robust truck capable of handling a wide variety of tasks while providing a large water supply. Chassis: • MAN TGM 13.290 4x4 EURO 6 with 290 HP (213 kW) and automated transmission • Single tires with matching track for excellent off-road capability Cab: • Standard crew cab (1:5) in RAL 3000 (fire red) • Air conditioning and auxiliary heater • Standard 4 SCBA holders in the crew compartment Bodywork: • High-quality frame construction using stainless and corrosion-free materials • Folding steps for each side equipment compartment • Customizable stainless steel equipment mountings to your specifications • Walkable, non-slip roof Vehicle Pump/Extinguishing Agent Tank: • Maintenance-free combined normal/high pressure pump FPN 2000-10 • PUMP&ROLL capable • Output 2,000 l/min at 10 bar and 400 l/min at 40 bar • Integrated, infinitely adjustable foam proportioning system • 4,000 l water tank with integrated 400 l foam agent tank • Additional heating in the pump compartment Firefighting Equipment: • High-pressure rapid intervention line with 50 m of rigid hose • Foam/water monitor (2,000 l/min) mounted on the roof • Self-protection system with 4 nozzles in front of the wheels Safety and Lighting: • LED lightbar on the roof / 2 LED front flashers • Pneumatic special signal system (Martin horn) • 100 W public address system with microphone • Reversing camera • Comprehensive LED lighting in crew and all equipment compartments • LED perimeter lighting on the superstructure plus additional work lights • Pneumatic LED light mast with remote control • Optional hygiene board available We would be pleased to provide you with a detailed offer and present the vehicle to you at our location in Berlin. All information provided to the best of our knowledge and belief, no guarantee for completeness or accuracy. This advertisement constitutes information only and does not represent a binding offer. Subject to prior sale! Rcedsxyunajpfx Amyod

Condition: new, functionality: fully functional, power: 375.1 kW (509.99 HP), axle configuration: 4x4, fuel: diesel, emission class: euro6, Year of construction: 2025, Equipment: additional headlights, airbag, trailer coupling, From our immediately available new vehicle stock, we offer you: TLF 4000/TLF 5000 All-Wheel Drive on all-terrain MAN TGS 18.510 4x4 Chassis Introducing our MAN Mountain Lion! With 510 hp and the all-terrain, single-tired all-wheel chassis, it thrives in demanding environments. Perfect for steep gradients, adverse conditions, and off-road areas far from any road. Chassis: - MAN TGS 18.510 4x4 EURO 6 with 510 hp (375 kW) - Automatic transmission - Single-tire off-road specification for maximum off-road capability Cab: - Standard crew cab (1:5) in RAL 3000 (fire red) Rjdpfx Amoxl Ab Ssyocd - Air conditioning and auxiliary heater - 4 standard SCBA holders in the crew compartment Superstructure: - High-quality modular construction in rust- and corrosion-resistant materials - 4 flexible and spacious equipment compartments per vehicle side - Swing panels for maximum storage capacity - Foldable steps for each lateral equipment compartment - Custom-made stainless steel equipment mountings according to your specifications - Walkable, non-slip vehicle roof Vehicle Pump/Extinguishing Agent Tank: - Maintenance-free combined normal/high-pressure pump FPN 3000-10 - PUMP&ROLL capable - Output of over 3,000 l/min at 10 bar and 400 l/min at 40 bar - Integrated, infinitely adjustable foam proportioning system - Water tank 5,000 l with integrated 500 l foam agent tank - Auxiliary heater in the pump compartment Firefighting Equipment: - High-pressure rapid attack with 50 m form-stable hose - Remote-controlled foam/water monitor on the vehicle roof - Remote-controlled front monitor - Self-protection system with 4 spray nozzles in front of the wheels Safety & Lighting: - LED light bar on the roof / 2 LED front flashers - Additional blue lights on the superstructure - Pneumatic Martin horn special signal system - 100 W PA system with announcement unit - Rear view camera - Comprehensive LED lighting in crew and all equipment compartments - Perimeter LED lighting on the body and auxiliary headlights - Pneumatic LED light mast with remote control - Hygiene board on request We would be happy to provide you with a detailed offer and present the vehicle to you in Berlin. All details provided to the best of our knowledge without guarantee of completeness or accuracy. This advertisement does not constitute an offer, but rather information. Subject to prior sale!