Used Radial Arm Saw for sale (10,470)

Condition: excellent (used), Year of construction: 2019, Motor power 1.5 kW Saw blade speed 2800 rpm Saw blade DM 250 mm Saw blade bore 30 mm Cutting length 400 mm (with 20 mm workpiece thickness) Cutting length at 45 degrees 230 mm Cutting depth 65 mm Swivel locking of the arm +/- 45 degrees Weight 140 kg Motor protection switch Brake motor Dcedpfxoulzche Agvsh Emergency stop switch CE including dust collection hood for extraction connection DM 120 mm Note for used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Year of construction: 1990, condition: good (used), REFORM RB32-10 radial arm drilling machine drilling capacity 32 mm MK 4 holder Djdpsm Sg R Defx Agvsch throat 1000 mm quill stroke 280 mm drive power 3 kw spindle speed 22 - 2000 rpm Weight 2 to

Condition: new, Year of construction: 2024, Radial Band Saw Dsdpfsmbbivox Agvech

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Dodslhwr Rspfx Agvoch Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: used, Technical data: Dcodpfxeyhnkfo Agvsh Max. saw blade diameter: 400 mm Min. saw blade diameter: 300 mm Saw spindle diameter: 30 mm Guide rail length: 1100 mm Miter cutting range: from –80° to +80° Bevel cutting range: from 0° to 90° Work table dimensions: 835x1175 mm Saw blade guard Power supply: 400 V Motor power: 3 kW Overall dimensions: Length: 1400 mm Width: 1175 mm Height: 1600 mm

Condition: used, Year of construction: 1999, Steel frame, cast iron arms and slides Mounting on 4 profiled rollers on ø25mm slides Dcodpfx Aeppmtuegveh Blade ø350mm AL30 Cutting height 110mm Cutting capacity 680mm Engine power 3kw 3000 rpm extra-flat motor Voltage 380V Engine tilt to the left from 0° to 75° Crank up and down on the front of the machine Suction outlet diameter 120mm 180cm/170cm/H160cm +- 420kg

Year of construction: 1980, condition: excellent (used), max disc diameter 400mm adjustment of the cut in three angles motor power 2.2 kW cutting height 100 mm Dsdpfom Ucyrex Agvsch cutting width at 90° 850 mm

Condition: like new (used), Motor power: 3.7 kW (5 HP) Table dimensions: 1200 × 800 mm Cutting angle adjustment: 3 positions Dcedpfexup Hmsx Agvjh Speed: 3000 RPM Voltage: 380 V

Condition: used, Year of construction: 1984, machine/vehicle number: 84043, Order No. 20218 Technical Specifications: - Drilling capacity in wood: 40 mm - Drilling capacity in steel: 18 mm - Drill spindle mount: MT 2 - Spindle stroke: 120 mm Dcsdpfowf Iqnox Agveh - Drill spindle speeds continuously adjustable in steps: 60 - 2840 rpm - Max. distance between table and drill spindle: 600 mm - Boom/unit tiltable left and right by 45° each - Boom/unit pivotable left and right - Table size: 450 x 450 mm - Drive: 400 V / 0.33 / 0.55 kW - Space required: approx. W 500 x H 1870 x D 1200 mm - Weight: approx. 150 kg

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical data: - Drilling capacity in steel 28 mm - Thread cutting device - Drilling spindle holder MK 3 - Drilling spindle stroke 160 mm - Table dimension approx. 750 x 500 mm - projection up to approx. 620 mm - Vertical stroke of the boom 600 mm - column diameter 250 mm - spindle speeds in 12 switching steps 80 - 2800 rpm - 3 feeds 0,1 + 0,15 + 0,25 mm/rev - drilling spindle drive 400 V / 5,5 kW - cooling device - space requirement approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg Dcodeb Ennkepfx Agvsh - Instruction manual

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type negotiated Description Notes Dcedpfxjb Rnv Ss Agvjh Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: ready for operation (used), * Brand: Radial Dcsdpfx Agjywm H Eovsh * Model: ventilator * Driving: 19 kW

Condition: like new (used), Year of construction: 2021, functionality: fully functional, System: • Hexagon Absolute Arm 8340, 7-Axis • RS6 Kit • CP-C Installed • Magnetic Base with Mounting Ring • Certified Length Standard – 1016mm (40 inch) • Leap Frog Kit Computer & Software: • Inspire Single Seat License • BendingStudio TUBE • BendingStudio CAD Wizard Dcodpjymnvrofx Agvoh

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V Dcodpfxeb A N Ale Agvjh -Price: per piece -Quantity: 180 pieces available -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V Dcedpfob A N Akjx Agveh -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Condition: good (used), Load capacity: 50 kg Dsdpfxeh Ri Svj Agvsch Working length: 7000 mm

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic Dcsdpfjwxmhlex Agveh 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, Dsdpfjtqt T Isx Agvech - complete with hydrostation, - electrical cabinet.

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm Dcedpefv Hphsfx Agvsh ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Djdpfxed H Hmhs Agvjch Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Dcjdey Uvnaepfx Agvoh Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: used, Year of construction: 2004, cutting height (max.): 125 mm, cutting width (max.): 4,300 mm, cutting length (max.): 2,200 mm, table length: 2,500 mm, table width: 1,000 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Maximum plate width: 4,300 mm Dcjdpfjy Ur Dqsx Agvoh Maximum plate length: 2,200 mm Maximum saw blade overhang: 125 mm Number of grippers: 10 Number of work tables: 4 MACHINE DETAILS Programming software: CADMATIC 4 Control system: WINDOWS XP EQUIPMENT Swiveling unit Lift table Roller feed table Lift table (manufacturer: LAWECO, dimensions: 1,000 x 2,500 mm) Barcode label printer (model: ZEBRA ZT231) Scoring unit The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8524

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 5012 EX, functionality: fully functional, cutting width (max.): 3,300 mm, saw blade diameter: 250 mm, total length: 4,200 mm, total width: 1,200 mm, overall weight: 485 kg, TECHNICAL DETAILS Maximum cutting height (horizontal): 1,550 mm Maximum cutting width: 3,300 mm Dcedpfx Aoy Tu Dqegveh Maximum cutting depth: 55 mm Saw blade diameter: 250 mm Arbor bore for saw blade diameter: 30 mm MACHINE DETAILS Voltage: 400 V Fuse: 16 A Power: 3.0 kW Dimensions & Weight Dimensions (L x W x H): 4,200 x 1,200 x 2,450 mm Shipping weight: 485 kg Shipping packages: 1 unit EQUIPMENT CE marking Vertical & horizontal cutting

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 8525-7-9390-FA, number of axes: 7, The original purchase price was €50,000! TECHNICAL DETAILS Measuring volume: 2.5 m³ Number of axles: 7 Djdpjza D Hmsfx Agvoch Note: No software dongle is included in the scope of delivery. All other accessories are included as shown in the pictures.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, cutting height (max.): 250 mm, cutting width (max.): 280 mm, saw band length: 2,950 mm, saw band speed: 1,667 mm/s, saw band width: 27 mm, TECHNICAL DETAILS Saw band dimensions: 2,950 x 27 x 0.9 mm Speed: 15-100 m/min Vise opening: 285 mm Dcodszapxzopfx Agveh Cutting capacity at 90° (round): 250 mm Cutting capacity at 90° (square): 220 mm Cutting capacity at 90° (rectangular): 280 x 220 mm Cutting capacity at 60° (round): 120 mm Cutting capacity at 60° (square): 80 mm Cutting capacity at 60° (rectangular): 140 x 100 mm Cutting capacity at 45° (round): 230/200 mm Cutting capacity at 45° (square): 200/170 mm Cutting capacity at 45° (rectangular): 220 x 200/200 x 140 mm Control: conventional MACHINE DETAILS Total power requirement: 2.2 kW Weight: 990 kg Machine dimensions: 2,500 x 2,230 x 2,050 mm