Circular sawing machines

Robland Z 400 X-1

Condition: good (used), Year of construction: 2003, functionality: fully functional, Length of sliding table: 3,000 mm Cutting width at rip fence: 1,000 mm Cutting height with blade diameter 450 mm: 75 - 150 mm Ltodpfxex Dax Eo Affea Cutting height with blade diameter 350 mm: max. 100 mm (each at 90-degree blade position) Double carriage on steel round guides, no Pertinax Reinforced main saw motor: 7.5 kW Maximum saw blade diameter: 450 mm Height adjustment of the saw unit via dimension input on the control panel Motorized tilt adjustment of the saw unit via dimension input on the control panel Supplied with newly installed 350 mm saw blade 2-axis scoring saw unit, can be set in the control system to desired height and alignment relative to the main saw blade Scoring unit automatically lowers below table level when not in use Adjustment of the scorer can be done while the machine is running RAPIDO scoring saw blade – simplifies scoring width adjustment, set up in max. 3 minutes Adjustment range: 2.8 – 3.8 mm Additional accessories: - Mitre fence extendable to 3,200 mm, with 2 foldable stops - LASER cutting line indicator, e.g. for trimming cuts on solid wood planks

Condition: new, Year of construction: 2025, Engine 7.5 kW, 50 Hz, 380 V, 3 phases Splitting pressure 20 tons Automatic saw yes Maximum trunk diameter 38 cm Maximum tree length 61 cm Feeder length 1.8 m Chain saw / splitter drive hydraulic max. 4800 rpm Saw and feeder control hydraulic Conveyor with winch 3.2 m length / 250 mm width Conveyor belt tilt angle ±15° (manually set) Ltodov Dvhyjpfx Affja Conveyor belt speed 0.8 m/s Chain saw 22" Cylinder diameter 4" Conveyor belt length 3.2 m Cycle time 6 seconds Trailer wheel 12" 4-arm splitting wedge Hydraulic oil capacity 32 L Weight 737 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.2 m long belt feeder that can transport processed wood directly to the trailer, the maximum height of wood feeding by the conveyor is 2 m The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: new, Year of construction: 2023, Weight 950 kg Power voltage 3 x 400 V Motor power (S6) 9,2 kW / 12 PS Dust extraction connection 160 mm diameter knife block 120 mm Number of knives 4 Dimensions knives 630 x 30 x 3 mm Max. Cutting depth 8 mm Width 630 mm Height capacity thickness planer 3 - 300 mm Dimensions thickness planer table 1160 x 630 mm Variable feed speed 5 - 22 m/min. Diameter feed rollers 70 mm incl. TERSA.cutterblock Ltedemdr A Ejpfx Affsa Picture contains special accessories

Condition: used, functionality: unexamined, Combi steamer Eloma Model Multimax B 10-11 Cooking functions: hot air and steam 11 shelves for GN 1/1 Stainless steel construction Connection: 400V, 17.1 kW, 32A-CEE plug Approx. dimensions: 925 x 810 x 850 mm (W x D x H) Used unit Ltedpfjvktcbsx Affsa Delivery service Many more machines in stock!

Condition: used, Sawblade tiltable 0-45 ° Length of the rolling table 3.200, 3.800 mm cutting width 1.300, 1,500 mm Motor output 7,5 kW Cutting height 177 mm Ltsdpfetg Ailox Affoa Cutting height at 45° 133 mm Saw blade diameter 500 mm Speed 3000/3600/4200 U/min. work height max. 870 mm Dust suction hood 1x120, 1x100 mm

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Weight: 655kg Ltsdpjgzlpkofx Affoa

Condition: new, Year of construction: 2024, Engine 15 kW Splitting pressure 30 tons Automatic saw yes Maximum log diameter 500 mm Maximum log length 500 mm Feed hydraulic (length x width) 1800 x 390 mm Ltsdpjv Dvkzjfx Affoa Maximum lifting height when splitting 230 mm (hydraulic) Saw and feeder control hydraulic Joystick control Conveyor with winch 3.5 m length / 300 mm width Chain saw 24" Saw speed 10000 rpm Cylinder diameter 4.5 " Cycle time 6 seconds 6-arm splitting wedge Oil flow 50 l / min. Hydraulic oil capacity 40 L Ball hitch 50 mm Wheels 22x11-10 ATV Weight 1000 kg The machine is placed on a wheeled chassis with a ball hitch. The saw-splitter is equipped with a 3.5 m long belt feeder that can transport processed wood directly to the trailer The machine's capacity is about 5 - 8 cubic meters of wood per hour. Depending on the type of wood. The machine can use various optional accessories, such as a hydraulic log feeder, wedges.

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 3200 mm Cutting width at the width stop: 1350 mm Cutting width at the cross-cut fence: 3200 mm Cutting depth: 170 mm Scorer: yes Saw blade height adjustment: electric Swivel adjustment saw blade: electric Width stop adjustment: manual Saw blade angle display: Scala Cutting height display: - Width stop display: Scala Cutting ruler display: Scale Ltedpfxjtnggyj Affsa Saw blade diameter: 500mm Speeds: 3000 / 4000 / 5000 rpm Motor power: 7 kW Motor brake: yes / automatic Suction connection: 80mm and 120mm Machine length: 3400mm Machine width: 2000mm weight: 900kg

Condition: new, Year of construction: 2025, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. Ljdsg Ngixspfx Affeta For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Ltsdpfxexl Dw Uo Affoa Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw