Used Push Broom for sale (1,341)

Condition: used, This listing is for the Eppendorf Centrifuge 5420 The unit is in full working condition and is ready for immediate use The Eppendorf 5420 is a non-refrigerated microcentrifuge designed for routine molecular biology workflows—especially spin‑column-based DNA/RNA purification, gel extraction, and PCR prep. It offers outstanding performance while saving precious bench space. Key Features & Design Highlights Compact Footprint: Measures just 24 × 35 × 22 cm (W × D × H), or approximately 9.4 × 13.8 × 8.7 in., making it ideal for crowded lab benches. High-Speed Performance: Reaches up to 15,060 rpm, generating a maximum relative centrifugal force (RCF) of 21,300 × g. Large Capacity with Flexibility: Comes standard with an aerosol‑tight rotor accommodating 24 × 1.5/2.0 mL tubes. Optional adapters support 0.2, 0.4, 0.5 mL tubes, 0.6 mL BD Microtainers, as well as a rotor for 32 × 0.2 mL PCR tubes or four 8‑strip PCR sets. Ergonomic Controls: Soft‑touch lid closure—one-finger operation. Knsdpsxhd Hbofx Anujc Automatic lid opening at the end of runs to minimize sample warming and ease access. One‑push short‑spin key—perfect for quick spins without holding the button. Easy‑clean keypad and large, bright LCD display. Low Noise & Safety: Quiet operation at

Condition: used, This listing is for the Thermo Scientific Multifuge Pro Centrifuge Series The units are in full working condition and are ready for immediate use The Thermo Scientific™ Multifuge™ Pro Centrifuge Series (including the X4R refrigerated model) is a high-performance, versatile laboratory centrifuge designed for high-capacity, general-purpose processing. Featuring a 4-liter capacity, these units are ideal for cell culture, blood separation, and microbiologyKey Features: - Auto-Lock™ Rotor Exchange: Tool-less, push-button rotor exchange for fast application changes in under 3 seconds. - Intuitive Interface: A full-color touch screen provides easy, rapid programming, with storage for up to 100 programs. - Versatility & Capacity: Compatible with up to 18 different rotors (swing-out and fixed-angle) with a maximum speed of 15,200 rpm (up to 25,830 x g). - Sample Protection: ClickSeal™ biocontainment lids provide certified, glove-friendly, snap-on sealing for safety. - Efficient Design: The X4R refrigerated model includes a powerful cooling system for temperature-sensitive samples, with a range of -10°C to +40°C. Kedpfxoyt Naxs Anuonc - SMARTSpin™ Technology: Advanced rotor management optimizes acceleration, braking, and residual load imbalance.

Condition: used, This listing is for a IKA Euro-star 100 D S002 Overhead Stirrer The unit is in full working condition and is ready for immediate release The IKA Eurostar 100 D S002 is a powerful laboratory overhead stirrer designed for a wide range of applications, ideal for mixing volumes up to 100 liters of water (H₂O). Engineered for precision and durability, it’s perfect for laboratories needing reliable and consistent mixing performance. Specifications Speed Range: 0/30 to 1300 rpm Maximum Stirring Capacity: 100 liters (H₂O) Maximum Viscosity: 70,000 mPas Maximum Torque: 100 Ncm Motor Rating Input/Output: 186 W / 136 W Motor Type: Maintenance-free brushless DC motor Chuck Range: 0.5 to 10 mm Protection Class: IP 42 Interfaces: RS 232 and USB for control and data documentation Dimensions (W x D x H): 86 x 208 x 248 mm Weight: Approx. 3.9 kg Power Supply: 230 V, 50/60 Hz Key Features Digital TFT Display: High-visibility screen for real-time parameter monitoring Removable Wireless Controller: Enhances ease of use and flexibility Microprocessor-Controlled Speed Regulation: Automatically adjusts speed to maintain precision within the set range, even with changes in sample viscosity Integrated Torque Trend Display: Enables real-time monitoring of viscosity changes Safety Systems: Built-in overload and anti-stall protection with automatic shut-off Kedpfx Asxv Dg Rjnuenc Quiet Operation: Low-noise performance for lab comfort Push-Through Agitator Shaft: Allows quick removal and easy cleaning Error Code Display: Notifies users of system alerts or issues Constant Speed Maintenance: Ensures uniform mixing, compensating for viscosity fluctuation

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Knjdpfxjvu Hd Tj Anuoc Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, Extension element for Dexion H280 boltless shelving. Price: €1.5/piece If you require shelving or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and are happy to assist you with your planning. Kjdpfxsw Tavqj Anuonc Additional accessories such as: Frames, corner and collision protection, push-through protection, chipboard panels, wire mesh decking, rear mesh panels, and depth supports are available. Shipping: Please enquire about freight costs by providing your postal code, location, and the desired quantity of items. Additional services: Planning, shelf assembly/disassembly, purchase/sale All technical data, details, and prices are subject to change and errors excepted. Subject to prior sale!

Condition: new, 890*1100 mm 250 kg/m2 €16.15 500 kg/m2 €18.02 750 kg/m2 €22.50 If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. Additional accessories available, such as: frame, corner, and impact protection, push-through guards, chipboard, grating, rear panel grating, deep shelf supports. D7sz8e0 Shipping: Please request shipping costs, providing your postal code, location, and the desired quantity of items. Additional service offerings: Planning, shelving assembly/disassembly, purchase/sale. Kjdpogqw A Hefx Anujnc Subject to changes and errors in technical data, information, and prices, as well as prior sale!

Condition: new, Storage platform accessories (stairs, transfer station, barrier gate, folding door) – new: Barrier gate: H1800 L1500 mm, H1800 L2300 mm, H1800 L3000 mm Folding door: width 1500 mm, 2000 mm If you require shelving or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving, as well as accessories, and will be happy to assist you with your planning. A customized offer tailored to your specific needs is a matter of course for us. Further accessories available, such as: Impact protection corners, ram protection walls, push-through guards, chipboard, Knsdpfefcrwyox Anujc grating, deep shelf profiles. Shipping: Please inquire about freight costs, specifying your postal code and location, as well as the desired quantity of items. Further service offerings: Shelving installation, maintenance, expansion, modification, and repair. Dismantling, PURCHASE, recycling, and disposal.

Condition: excellent (used), You are buying mesh shelves for pallet racking with end station. Size: 1320*850 mm and 890*850 mm Height (L shape): 22 cm Material thickness: 4.24 mm Pitch: 92*48 mm Load capacity: approx. 600 kg/m2 Knjdpfx Aopu Ad Dsnuoc If you require shelves or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used shelving and accessories and will be happy to assist you with your planning. Further accessories such as Frame, corner and collision protection, push-through protection, chipboard, gratings, rear wall gratings, depth bars available. Shipping: Please enquire about freight costs, stating your zip code and location, as well as the required quantity of items. Further services: Planning, shelf assembly/disassembly, purchase/sale Subject to changes and errors in technical data, information and prices as well as prior sale!

Condition: good (used), Frame: 7000*1050 mm 105 EUR/piece (53 pieces) Beams: 1800*100*50 mm 2400 kg/level 10 EUR/piece (315 pieces) If you need shelving or accessories in other configurations or versions, please contact us. We offer a comprehensive range of new and used racking systems and accessories and are happy to assist you with your planning. Ksdpfx Ansuf Snaousnc Additional accessories available, such as: Frames, corner and collision protection, push-through guards, chipboards, mesh shelves, back mesh panels, depth supports. Shipping: Please enquire about shipping costs by providing your postal code, city, and the desired item quantity. Other services offered: Planning, rack assembly/disassembly, purchasing/sales Subject to changes and errors in technical data, information and prices, as well as prior sale!

Condition: used, ONLY BEAMS for Stow pallet racking: Beam sizes: 2900*120 mm 3600*140 mm 1800*80 mm 3500*145 mm 2700*80 mm 1900*120 mm 4400*160 mm 3700*160 mm If you require racking or accessories in other configurations or designs, please contact us. We offer a comprehensive range of new and used racking, as well as accessories, and will be happy to assist you with your planning. Other accessories available include: Frame, corner, and end protectors, push-through guards, chipboard, grating, back panel grating, and deep shelf supports. Shipping: Please request shipping costs by providing your postal code, location, and the desired quantity of items. Other service offerings: Planning, racking installation/disassembly, purchase/sale Changes and errors in technical data, information, and prices, as well as sales subject to prior sale! Kodpehryh Hefx Anusnc

Year of construction: 2026, condition: new, Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for ground level access. The KVK 2A model is equipped with a pre-stretch system for 250% stretch. Knedpfez E Ixasx Anusc Thanks to the pre-stretch system, you can produce up to 3.5 meters of film on the pallet from 1 meter of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets a day. The KVK 2A is ideal if no ramp can be used for space reasons. Or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2026, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. Kedpfx Asz E Ix Tonuenc If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: excellent (used), Year of construction: 2012, Ref:11153 . 2012 SCS Automaberg Trim & Perf Duplex Die-cut, Trim, Split, Cut, Perforate, Punch System, handling any material. Features: A highly versatile and productive line which is a genuine “ALL-IN-ONE” solution for finishing operations. The line can include different workstations for multiple tasks and process optimization. The combination of TRIM & PERF with complementary modules offers high quality products combined with reliability, allowing the needs of digital systems to be met, as well as those for binding, in particular, the production of products for single and multi-up work IN A SINGLE PASS. Features: Easily moveable. In-feed belt height adjustable for easy connection with upstream machines. A simple push button transforms TRIM & PERF into a regular conveyor belt, no bypass or similar equipment needed. ‘CONTINUOUS FEEDER’ Top loading, bottom feeding, rubber belt type feeder for single or folded sheets, saddle stitched products and perfect bound books. ‘3 WAY’ This module allows perfect alignment of digital sheets to a print reference mark. ‘GRIPPER’ Electronic system for pass die-cutting: reduces machine set-up times and overlaying, allows a high level of product repeatability and reduces costs of American style dinking dies. Waste ejection system allows for die cutting without waste, clean shape products. Knsdpez Ek S Aefx Anusc ‘THERMO STICK’ holds some sheets together on the ink reference sides by ‘thermo’ welding - improving the die cutting process. ‘PRE-CUT DEVICE’ Perfect 'spine' cutting system up to 14 mm thickness. ‘TEAR OFF - PULL AWAY’ The system pulls away mingled perforation sheets in preparation for the sewing step. ‘SIMPLE DECK’ Collects cards in series after die cutting. ‘EXIT BELT’ Shingle delivery belt with batch counter. DIE CUTTING No nicks! Connections between the cut product and the waste are not required. Automatic waste ejection. 'Clean' shapes ready to be packed. TRIMMING-SPLITTING Superior quality in splitting and trimming - also for very small dimensions. ROUND CORNER CUTTING Cutting including all four corners in a single pass. PERFORATING PUNCHING Combined perforating-punching jobs in a single pass to optimize production process efficiency. IDEAL FOR:- Flat cardboard, also laminated up to 2 mm thickness, and on plastic material up to 1 mm thickness. Folded and stitched product die cut without waste. Pre-cut device for perfect spine cutting up to 14 mm thickness. Standard corner radii from 3 to 15 mm. Stamp perforating, wire-comb perforating, tear-off perforating, single hole punching, file hole punching, euro hole. Specifications: Product size untrimmed (LxW) (sizes subject to jobs) Standard max. 500 x 600 mm Standard min. 50 x 50 mm Product thickness, Standard max. 4mm (optional max.) 14mm Mechanical speed, max. 9.000 cycles/hr Compressed air requirement: 200 l/min at 6 bar.

Condition: used, Labelling line with two print and apply stations This VWS Nederland line has a conveyor with two labelling stations in a row. Each station has its own printer and label reel, so you can print and apply two different labels or keep running on two reels. Each station has its own display control. The control panel has start and stop buttons per station and an emergency stop. We did not find a rating plate with the year of manufacture. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Labelling line with two print and apply stations Stations: 2, each with printer and label reel Kjdpfx Anoz Nc R Seusnc Controls: Display per station, push-button panel with emergency stop Construction: Stainless steel frame with conveyor

Condition: used, Mixing kettle that tilts for emptying This stainless steel kettle is used for mixing sauces, salads, fillings and similar products. The lid is locked pneumatically so nothing escapes during mixing. Once mixed, the kettle tilts in its frame so it can be emptied easily into a tub or onto a conveyor. It is operated from a separate control cabinet with buttons for mixing, tilting and an emergency stop. There is no legible rating plate, so the make and year of manufacture are unknown. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Tilting mixing kettle Kjdsz Nc S Nopfx Anuonc Lid: Pneumatically locked Discharge: By tilting the kettle Controls: Separate control cabinet with push buttons and emergency stop Construction: Stainless steel

Condition: used, maximum load weight: 33,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2020, next inspection (TÜV): 06/2027, loading space volume: 65 m³, total width: 2,550 mm, total height: 3,670 mm, Year of construction: 2020, Equipment: ABS, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to final agreement, errors, typos, and prior sale: Reisch 65 cbm sliding floor trailer Kedpfxjz Nb Ene Anuonc (Trailer No. 674) First registration: 06/03/2020 Type: RSBS-3-10/C3V Permissible gross vehicle weight: 39,000 kg Unladen weight: 6,000 kg Payload: 33,000 kg Overall length: 11,000 mm Overall width: 2,550 mm Overall height: 3,670 mm Load volume: approx. 65 cbm MOT (TÜV) valid until: 06/2027, next inspection (SP) due: 12/2026 Roll-up cover, platform Clean floor, end pieces, sides, reinforced rear walls Portal doors 1/2 and 1/2 at the rear, grain slide Remote control Cargo floor LED work lights + reversing lights 2 x 12-ton, 2-speed geared winch Shovel and broom holder on the driver's side at the front Storage box, plastic, on the driver's side in the middle Air suspension with lifting and lowering function 1 lifting axle BPW drum brakes Tires: 385/65R22.5, 1.) approx. 70/80%, 2.) approx. 80/90%, 3.) approx. 60/60% ALCOA aluminum rims Extension ladder on the passenger side at the rear Access ladder behind the kingpin Half fender Price: €18,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the Ludwigslust District Court; for disputes exceeding this value, it is the Schwerin Regional Court. Subject to errors, typos, and prior sale.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1986, total height: 320 mm, total length: 8,775 mm, total width: 2,100 mm, load capacity: 2,000 kg, working height: 6,000 mm, lifting height: 6,000 mm, Equipment: documentation/manual, Abus overhead crane – Type: single-girder – Capacity: 2,000 kg – Lifting height: 6 m – Year of manufacture: 1986 – Hoist type: wire rope hoist – FEM/ISO hoist: 3m Dimensions – Span: 8,775 mm centre-to-centre – Installation height: 320 mm – Width of wheel set excluding bumpers: 2,100 mm – Wheelbase: 1,900 mm Kedpfx Ansz N T Naoujnc – Suitable for crane rail: 50×30 mm Speeds – Hoisting: 5/0.8 m/min (2 speeds) Features – Control: wired push-button control box – Crane manual available: yes, newly prepared – Electrical diagram available: yes – Condition: in good condition, dismantled but operational – Dismantled: yes, available immediately

Condition: new, mileage: 45 km, power: 129 kW (175.39 HP), fuel type: diesel, empty load weight: 3,655 kg, maximum load weight: 4,895 kg, overall weight: 8,550 kg, axle configuration: 4x2, wheelbase: 3,400 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 5,700 mm, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 400 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, hydraulics, immobilizer system, onboard computer, soot filter, trailer coupling, Fuso 9C18 Duonic GSR City roll-off tipper, available in approximately 2-4 weeks, also available for rent with a purchase option. - Containers in various designs in stock - Gross vehicle weight: 8550kg, unladen weight: 3655kg, payload without container: 4895kg - Weight reduction to a gross vehicle weight of 7.5t possible, payload then approximately 3850kg - Automatic transmission (Duonic) - Differential lock with limited slip - Batteries 2 x 100 Ah - Trailer coupling, ball head 3500kg with wiring harness (factory-installed) - Heated exterior mirrors - Automatic climate control Knedpfez Ixv Uox Anusc - Radio preparation - Rear view camera - Tire pressure and tire temperature monitoring - Turning assistant - Reversing warning - Auxiliary drive with speed increase, factory-installed - Battery cover and AdBlue tank cover - Preparation for battery disconnection relay - Traction tires (all-weather M+S) Continental - Seat covers - Optional installation: rear view camera, rotating beacons, cover, net/strap box, etc. - Various containers constantly in stock or available to order - 3 years / 100,000km factory warranty, Fuso is a brand of Daimler Truck AG Roll-off system mounted on Fuso 9C18 - Roll-off system for containers according to DIN 30722 Part 3 - Lifting and pushing capacity 6000kg - Container length 3500-4000mm - Hook height 900mm - Hydraulic articulated hook arm (shallow lifting angle) - Hydraulic container locking (accommodation of third-party containers possible, safe container transport) - Mechanical hook lock - Cable remote control mounted on the A-pillar, operation possible outside the cab, additionally mechanical emergency operation on the device - Emergency/off function - CE certificate and kit box - Final painting of the hooklift: Black RAL 9005 / Rollers: Black RAL 9005 - Errors and prior sale are excepted! - More information, further XXL pictures on our website: - For inquiries in English, please call ?si=3WuXgXxgPc5ChoBp ... Climate control, automatic climate control, automatic transmission, VAT can be shown separately, ABS, radio, on-board computer, cruise control, heated mirrors, electric windows, central locking with remote control, trailer coupling, power steering, differential lock, tinted glass, tachograph, cab: short cab, air-suspended driver's seat, electric windows, auxiliary drive, new, emission class: Euro 6, diesel, rear-wheel drive, very good condition, HSN 7149, hydraulics, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban), particulate filter, can be rented, particulate emission badge: 4 - Green

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, axle configuration: 6x4, wheelbase: 38,990 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, traction control, trailer coupling, - Adaptive cruise control - Heated mirrors - Brake booster - Differential lock - High beam headlights - Low noise - Speed limiter - Air conditioning - Air suspension - Air-sprung seats Kedoz Incqepfx Anusnc - Rearview camera EUROMIX TO GO – immediately available new vehicles in stock at Porta Westfalica. Completely assembled, directly from the manufacturer – ideal for short-term capacity expansion or replacement investment. Price negotiable – please contact us. MAN TGS 28.480 6x4-4 BL CH – Euro 6e – steered lift axle – New 3-sided tipper - Hiab 228-6 MAN TGS 28.480 6x4-4 BL CH Vehicle type: Truck chassis New vehicle / ready for delivery Engine: MAN D26, 12.4 liters Power: 353 kW / 480 hp Torque: 2,450 Nm Emission standard: Euro 6e Transmission: MAN TipMatic 12.28 OD Permissible total weight: 26,000 kg Technical total weight: 30,000 kg Permissible train weight: 40,000 kg Technical train weight: up to 61,000 kg Wheelbase: 3,900 mm Distance rear axle – trailing axle: 1,400 mm Frame overhang rear: 1,500 mm Cab color: Pure white RAL 9010 Chassis and axles: Axle configuration 6x4-4 Front axle driven and switchable 9,000 kg front axle 13,000 kg driven rear axle 9,000 kg steered trailing axle Trailing axle can be lifted and unloaded Hill start assist with speed limitation Differential lock on the driven rear axle MAN transfer case G Road and off-road gearing Electronic transfer case locking management Leaf spring suspension front Air suspension rear Air suspension on the trailing axle Stabilizers on all axles Emergency steering pump Tire size front: 385/65 R22.5 Tire size rear: 315/80 R22.5 Tire size trailing axle: 385/65 R22.5 Tire pressure monitoring system with temperature display Transmission and driving programs: MAN TipMatic 12-speed automatic transmission TipMatic Efficiency TipMatic Offroad TipMatic Manoeuvre MAN Idle Speed Driving Off-road gearing via push-button switch Transmission for increased drive torque Transmission PTO NTX/10c PTO suitable for continuous operation PTO can be switched while driving Brake and safety systems: Electronic brake system EBS Anti-lock braking system ABS Electronic stability program ESP Anti-slip regulation ASR High-performance engine brake MAN EVBec Emergency brake assist EBA Plus Full brake assist Turning assist Front detection Traffic sign recognition Rear view assist Driver attention warning MAN EasyStart hill start assist Tire pressure monitoring system Preparation for alcohol interlock Your advantages • Immediately ready for use: concrete pumps, concrete mixers, tippers, roll-off tippers • Chassis, body, and assembly from a single source • Fair prices • Financing in 19 European countries • Trade-in of your used vehicle Your contacts • Denis Omeragic: German, English, Bosnian, Croatian, Serbian) • Henri Omeragic: (German, Bosnian, Croatian, Serbian) • Harun Cevik: (German, English, Turkish) • Jamila Azzi: (French, Arabic) • Olga Tissen: 170...

Condition: used, Heidelberg KSB Cylinder Automatic die cutting machine Max Sheet Format: 40 x 57 cm (approx. 15.75 x 22.44 inches) Min Sheet Format: 12.5 x 15.0 cm Speed: Approx. 5,000 sheets/hour Weight: ~3,500 kg Hot foil device Step motor Schneider PLC Schneider with full documentation Knedpfxsxz D Dao Anuoc 2 zones - two push and pull rollers

Condition: used, mileage: 24,691 km, power: 177 kW (240.65 HP), first registration: 04/1994, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, all wheel drive, compressor, parking heater, Mercedes-Benz 1124AF 4x4 all-wheel drive fire engine LF16/12 according to DIN 14530, 177 kW/240 hp with 9 seats and auxiliary heating First registered: 04/1994 Knedpfxowawdgo Anuoc Mileage: 24,691 km ----* 6-cylinder OM 366 LA engine with 240 hp. * 6-speed manual transmission with low gear ratio * 2x differential locks (longitudinal and transverse) * ABS (deactivated via push button) * Warm air auxiliary heating * 90 km/h according to the documents * Compressed air connection for external filling of the brake system * Crew cabin with 9 seats, all with seat belts, including 2 emergency seats * Unladen weight: 7,610 kg. * Gross vehicle weight: 12,000 kg. * Small tow bar with 2000 kg towing capacity * Rotating beacons * Searchlights * 9R22.5 tires in good condition * Wheelbase: 3640 mm * Overall vehicle length: 7300 mm * LF 16/12 fire engine with mast body * 1270-liter fire water tank * Rosenbauer FP 16/8 centrifugal fire pump * Storage for generator in body * 1 spare wheel * Roof storage compartments for ladders and hoses ----TÜV valid until 11/2025 Good technical and visual condition, ready to drive and use immediately! Full service history! Perfect off-road base vehicle for a robust camper/expedition vehicle or other all-wheel drive vehicle applications. Subject to errors and changes!

Condition: used, Scheugenpflug DOS P016 Piston Dispenser DOS P Piston Dispensing System for a wide range of requirements The piston dispensing systems from Scheugenpflug operate according to the principle of volumetric dispensing, meaning the dispensed amount of material is mechanically determined by the geometry and stroke of the associated cylinders. The cylinder is filled with the potting material via a corresponding material feed system. When a two-component medium is used, the volume of the two cylinders simultaneously determines the ratio of the resin and hardener components to each other. The dispensing pistons push the two components in separate channels simultaneously towards the outlet valve, where they first mix into a homogeneous reactive medium in the static mixing tube. The DOS P016 / TCA piston dispensing systems are highly precise volumetric dispensing systems designed for processing 1K and 2K materials and cover a wide range of requirements. Precisely dimensioned dispensing cylinders enable the application of reproducible material volumes. In the case of 2K materials, the parallel emptying of both cylinders into the common mixing tube creates a consistently constant mixing ratio, ensuring maximum process reliability. At the same time, pressure-, moisture- or shear-sensitive potting media can also be processed gently without any changes to the material being feared. Users also benefit from simple and quick maintenance, long service life and considerably reduced maintenance costs. With optional features such as valve monitoring, mixing tube heating or dispensing head heating, these systems can be flexibly adapted to the respective task. Your advantages No dependence of dispensing accuracy on temperature, pressure or viscosity Consistently constant mixing ratio at all times due to parallel emptying of the dispensing cylinders Wide range of applications (material and application-related) Important functions Simultaneous actuation of the cylinders by a common stroke mechanism enables a homogeneous mixing ratio Sensory monitoring of the inlet and outlet valves as well as the cylinder filling Temperature control of the material by mixing tube heating (optional) Dispensing needle monitoring with camera (optional) Product data General Materials: 1K and 2K Viscosity: From liquid to highly viscous Fillers: Filled and/or abrasive media Operating principle: Volumetric dispensing Properties Constant mixing ratio for 2K Independent of temperature, material feed pressure and viscosity of the casting resin Precisely reproducible and highly accurate results Maximum process reliability Application Filling potting, sealing, bonding, application of thermally conductive materials, encapsulation (glob top) DOS P016 Max. volume/shot 2K at ratio 1:1 1K: 0.06/17 ml 2K: 0.1/32 ml Dispensing speed max. 1 [ml/s]: 2 Knedpezc Npljfx Anuec Dispensing accuracy at max. stroke [%]: < 0.5 Heatable up to max. 2 [°C]: 80 Outlets: 1K: 1-4, 6, 8 2K: 1-4 Weight: 14 kg Dimensions (W x H x D) 290 x 350 x 230 mm Video on the mode of operation "Everything from one source: We will gladly offer you suitable financing for your project." You can find more dispensers - new and used - in our shop! International shipping costs on request!

Condition: used, MEMMERT Precision incubator / Refrigerated incubator MEMMERT ICP 600 Precision incubator with cooling, air circulation, and 256-liter internal volume For sale is a used precision incubator from the manufacturer MEMMERT. The device is suitable for temperature-controlled applications in laboratories, research, quality assurance, and industry, as well as for incubation and testing tasks in the temperature range of 0 °C to 60 °C. Technical data: Manufacturer: MEMMERT GmbH + Co. KG Type: ICP 600 Device type: Precision incubator / Refrigerated incubator Internal volume: 256 liters Setting temperature range: 0 °C to 60 °C Operating temperature range: 0 °C to 60 °C Setting accuracy: 0.1 °C Nominal temperature: 60 °C Kodpfxsz Eh Sye Anujnc Internal dimensions: approx. 800 × 640 × 500 mm (W × H × D) External dimensions: approx. 958 × 1335 × 656 mm (W × H × D) Weight: approx. 144 kg Power connection: 230 V / 50 Hz Power consumption: 3.1 A Power: 700 W Protection class: IP20 Inserts: Maximum number of sliding shelves: 7 Maximum load per sliding shelf: 30 kg Maximum load per device: 80 kg Equipment: Electronic PID process controller Alphanumeric text display Internal data logger Program control for up to 40 ramp segments Adjustable air circulation Integrated weekly timer Recessed push button / rotary encoder Optical alarm indicator Refrigeration unit with automatic hot gas defrost Stainless steel interior Sliding shelves as shown in the pictures Mobile base RS232 interface Accessories as shown in the pictures Application areas: Laboratory applications Incubation Temperature tests Material testing Quality assurance Research and development Industrial applications Temperature-controlled storage Scope of delivery: 1 × MEMMERT ICP 600 precision incubator Sliding shelves as shown in the pictures Mobile base Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplate present Shipping or freight transport is possible. Subject to change, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), lifting height: 31,630 mm, fuel type: diesel, General information Year of manufacture: 2011 Weights Empty weight: 31.200 kg Functional Lifting capacity: 1.000 kg Working height: 3.363 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Production country: NL Additional information Please contact Christian Theißen for more information Knjdpsz D Txijfx Anuec Manufacturer: Holland Lift Model: G-320DL30 4WDS/N Year of build: 2011 Condition: Used Data: Max. working height: 33,63 m Max. platform height: 31,63 m Lifting capacity: 1000 kg Lifting capacity on extension: 1000 kg Drive type: Diesel Platform dimensions LxW: 6,56 x 2,68 m Platform length pushed out: 9,56 m Total dimensions LxW: 7,05 x 3,01 m Transport height with / without railing: 3,62 / 2,87 m Movable up to working height: 33,63 m Ground clearance: 0,21 m indoor use only: nein Empty weight: 31.200 kg Special features: White tires, automatic outrigger leveling, 230V connection on platform, hydraulic outriggers, 4-wheel steering, all-wheel drive, anchor points for restraint systems (PPE) provided.

Condition: used, Mechatronics RPU-2100R Reagent Production Unit The Mechatronics RPU-2100R is a reagent production unit used in hematology to optimize reagent logistics in laboratories. The device is manufactured by RR Mechatronics and is often used in combination with Sysmex hematology analyzers. Purpose and Function The RPU-2100R (Reagent Production Unit) is designed to automatically dilute concentrated reagents (such as Cellpack S Conc.) and produce large quantities of ready-to-use reagent on-site in the laboratory. The RPU-2100R is a single unit, with all its components housed in a closed casing. The casing features removable, epoxy-coated sheet metal covers. Knsdoyk U Dwjpfx Anuec All external connections, as well as the ON/OFF switch, are located on the rear of the device. All components that can be serviced and replaced by the user are accessible via the front door. The trolley for the Cellpack concentrate (e.g., Cellpack®-S Conc.) can be attached to three sides of the device. Performance Features and Capacities The RPU-2100R is designed to optimize reagent management for laboratories with high throughput: Reagent concentrates: Uses Cellpack S Conc. in 10L and 20L containers. Throughput per concentrate: With a 10L container, up to 8,250 complete blood counts per month can be performed without changing the reagent. With a 20L container, up to 16,500 complete blood counts per month are possible. Shelf life: The mixed reagent has a shelf life of 30 days after opening. Manufacturer: RR Mechatronics Model: RPU-2100R Catalog number: NARP109010 External connections Power supply, Euro plug Ethernet/USB (only NARP109010) RJ45/USB-B RS-232 (only NARP109000) 9 Pin SUB D connector External connections (liquids) Water connection: G ¾" inch thread Reagent outlet connection (4x) Push-in hose connection, outer diameter 6 mm Waste connection (1x) Hose sleeve, hose inner diameter 12 mm Reagent concentrate Maximum size: 390 x 260 x 300 mm (W x D x H) Reagent: SYSMEX Cellpack Concentrate Reagent draw rate: 0.5 liters/minute, max. 6 minutes (with full supply and overflow container and new pre-filter) 1 liter/minute, max. 2 minutes Filtration Air filter, bacterial filter, pore size 0.2 µm Liquid pre-filter, particle filter (sterilized), pore size 0.8+0.45 µm, self-venting Liquid final filter, bacterial filter (sterilized), pore size 0.2 µm, self-venting System dimensions Width: 500 mm Height: 700 mm Depth: 430 mm Weight: approx. 50 kg Volume Water tank: 2.5 liters Supply tank: 2.5 liters Mixing tank: 0.6 liters Overflow tank: 0.6 liters Language selection available: de, en, es, fr, hu, it, nl, sk, sv (expandable) Voltage: 230 VAC (+/- 10%) Frequency: 50-60 Hz Year of manufacture: 2014 You can find more items – new and used – in our shop! International shipping costs upon request!