Used Push Broom for sale (1,416)

Condition: used, Year of construction: 1992, Overview This complete automatic can filling line has a nominal output of approx. 20,000 cans/hour for 330 ml cans (can type 211/202), packed 24 cans per foil-shrunk tray. The core is an O+H / KHS Hansacan filler with 30 filling valves, mechanically blocked to a Ferrum F 505 G seamer with 5 seaming heads. Empty cans are supplied by a TMG Impianti Vega 120/B depalletizer and rinsed on a Hysek Rinsstar 20000 rinser before filling. A date/coding printer is not included. Technical data - Line type: Complete automatic can filling line - Nominal output: approx. 20,000 cans/hour (330 ml), product- and temperature-dependent - Container: 330 ml can, can type 211/202; 24 cans per foil-shrunk tray - Controls: PLC Siemens S7, Siemens SIMATIC HMI - Warmer and drying station reconditioned; fill-height control and packaging machine new Equipment - Can Depalletizer | TMG Impianti | Vega 120/B | tier-sheet removal, can table, pallet magazine | 2014 - Can Rinser | Hysek | Rinsstar 20000 | filtered-water rinse | 2001 - Can Filler | O+H / KHS | Hansacan | 30 filling valves, fixed for can type 211/202, will be general overhauled | 1992 - Can Seamer | Ferrum | F 505 G | 5 seaming heads, blocked with the filler | 2010 - Can Warmer | SMB | stainless-steel tunnel | warms cans to approx. 25 °C before packaging | reconditioned - Fill-Height Control | Heuft | incl. pushing/reject station | new - Can Drying Station | Gesete | air-dries cans before coding | reconditioned - Packaging Machine | Termo Pack | UMT-1500 | tray erector, packer and foil shrink | new - 2x can turning stations (330 ml can) - Can conveyor system incl. electrical control panel (PLC Siemens S7) - Tray conveyor system incl. drive station Condition Used line delivered in reconditioned or new condition. The filler and Ferrum seamer are reconditioned and blocked as one unit with a new electrical panel (PLC Siemens S7), new pneumatic panel and renewed pneumatic valves; the can warmer and can drying station are reconditioned; the fill-height control and packaging machine are supplied new. This work is carried out as part of the order, so the line is supplied component by component and is not yet assembled or tested as one running unit. The can depalletizer is the exception - it is already fully reconditioned and in stock. Filler and seamer are delivered with CE declaration and full documentation. Components can be inspected on request. Availability Fedpfx Akozlqu Toyegh On request; delivery time as per agreement. Reconditioned and new-build components are supplied with a lead time after order. Location and inspection on request.

Condition: used, Year of construction: 2016, Overview  This inspection system was manufactured in 2016 by FT System (Italy). The machine is still in operation in Spain and can be visited in person. It is available due to changes in the production process and is no longer needed by the current owner. Technical data  - Capacity: 8,000 bph - Formats: 0.75 L bottles - Functions: Neck inspection, wall inspection, bottom inspection, washing liquid residue detection - Dimensions: 318 × 152 × 235 cm - Weight: 1,022 kg Scope of Delivery  - Main bottle bottom inspection module - Mouth integrity control - Wall inspection - Washing liquid residue detection - Push expulsion - Progressive expulsion - CIP Astigarraga Fgedpfx Akexfccijyjh  

Condition: used, Year of construction: 2006, Ref:10882 . 2006 SCS ‘Easy Trim’ Front Cutting Device. For the front (foredge) cutting of perfect bound and thread sewn soft cover books (without flaps device). Can be integrated in or off-line, and used either before or after the three knife trimmer (4th cut) and when not in use the unit can be simply used as a conveyor. Very quick size change of approx. 3 mins through simple keying in of book parameters. Front trim using a steel knife against a plastic cutting stick. Fjdpfsvtcviex Akyogh Motorised delivery table. Single button push transforms the unit into a regular conveyor belt so no divert or extra conveyor necessary. Specification: Book spine length, Max: 540 mm, Min: 120 mm Book width trimmed, Max: 350 mm, Min: 100 mm Book thickness, Max: 60 mm, Min: 5 mm Off-cut width, Max: 45 mm, Min: 5 mm Mechanical speed, Max: 4,000 cycles/hr. Compressed air required : 100 ltr/min.@ 6 bar

Condition: used, Year of construction: 2017, Overview The Crate inspector was built in 2017 by Germany manufacturer Visiontec. It is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in another line. Currently the setup is for a long side leeding crate. Fsdpol Hx Ibefx Akyogh

Condition: new, plate thickness max. 5.0 mm tube diameter 27.9 - 61.0 mm motor 400 Volt total power requirement 2.2 kW weight of the machine ca. 87.0 kg. The AL1-2E electric pipe notcher is started at the push of a button, and the pipe notcher is driven continuously. This means you can continue to work on new parts without having to switch the machine on again each time. With the electrically driven AL1-2E pipe notcher you can notch pipe outer diameters of Ø 26.9 (3/4?), Ø 33.7 (1?), Ø 42.4 (1 ¼"), Ø 48.3 (1 ½"), Ø 60.3 (2?). Do you often notch pipes? Then the electrically driven AL1-2E pipe notcher with Fgjdpfxsxaarde Akysh the 2.2 kW electric motor is just right for you. The motor forms a unit with the special eccentric shaft that drives the notching tool. The motor is also equipped with an on/off switch with 0-voltage protection and a protective cap. Equipment: - electric motor pipe notching machine - for pipes 27.9 - 34.8 - 42.8 - 49.0 and 61.0 mm - operating instructions

Condition: used, Year of construction: 1998, sheet width 3060 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 3100 mm down holder 16 Stück no. of strokes max. 10 - 15 Hub/min oil volume 160 ltr. cutting angle 1.6 ° back stop - adjustable 6.0 - 750 mm Control ELGO P9521 total power requirement 18.5 kW weight 6300 kg range L-W-H 3900 x 2300 x 1630 mm Features: - Robust electro-hydraulic swing beam shear - ELGO digital display model P9521, for electric backgauge * Backgauge travel X = 750 mm Fgsdsyq Szmjpfx Akyeh * Backgauge-free ball screw drive * Travel speed 100 mm/s - 1x stable side stop * With T-slot, flip-stop, and millimeter scale - 2x stable front support arms - Electric cutting length limiter * Cutting length limiter to increase the stroke rate/min. - Manual cutting gap adjustment * Centrally operated on the right side stand - Front support plates - Front finger/interference guard - Inching operation with push buttons on the left control panel - Protective grille = safety device behind the machine - Operating instructions

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 13.0 mm thickness at "Niro-steel" 8.0 mm down holder 14 Stück no. of strokes max. 11 Hub/min cutting angle 1°15 work height max. 770 mm column arm ? mm oil volume 300 ltr. control konv. total power requirement 15.0 kW weight 11800 kg range L-W-H 4255 x 2250 x 2400 mm Features: - Robust electro-hydraulic swing pruning shears - Operation, swivels to the front left - Electro-motorized backgauge * on recirculating ball screws * Movement by push-button (forwards backwards) * including ELGO digital position indicator - Manual quick cutting gap adjustment * by eccentric (right side stand) - Machine stand with overhang - 1x long side stop, with mm scale - 2x front support arms, with mm scale - Ball rollers in the front support table - Hinged front finger guard - 1x free-moving foot switch Fgsdpfx Akjx Ni D Roysh - Rear safety device (protective grille) - 2x front emergency stop button - Operating instructions (PDF)

Condition: new, bore capacity in steel (diameter) 30.0 mm Fodexaa Ufepfx Akysgh throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min engine output 1.0 / 1.6 kW column diameter 115 mm distance spindle /table 132 / 724 mm weight 260 kg Machine height 1790 mm Features: - Lockable main switch - Mushroom push button for EMERGENCY STOP - Reversing switch for clockwise and counterclockwise rotation - Motor with thermal protection contact - Stepless speed adjustment - Digital speed display - Protection class IP 54 - Motor insulation class “F” (155°) - Connection cable (without plug, cable length 2 m) - Spindle guard with electrical protection - DD textured paint finish in signal white RAL9003, PANTONE 7545c, black

Condition: used, Year of construction: 2012, lifting height: 7,900 mm, fuel type: electric, Weights Empty weight: 2.710 kg Functional Lifting capacity: 450 kg Working height: 990 cm Dimensions of cargo space: 250 x 117 x 234 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 2646ES Fodpsv Tiwyjfx Akyjgh Year of build: 2012 Condition: Used Data: Max. working height: 9,90 m Max. platform height: 7,90 m Lifting capacity: 450 kg Lifting capacity on extension: 120 kg Drive type: Batterie Platform dimensions LxW: 2,50 x 1,10 m Platform length pushed out: 3,73 m Total dimensions LxW: 2,50 x 1,17 m Height transport position with/without railing: 2,34/1,92 m Movable up to working height: 9,90 m Ground clearance: 0,13 m indoor use only: nein Empty weight: 2.710 kg Special features: White tires, attachment points for personal protective equipment (PPE) present. Location: 41468 Neuss immediately available

Condition: good (used), Front brush, front sweeper, sweeping roller, sweeping brush -Suitable for: Kramer Tremo, Multicar, Iseki, Hako and other tractors -was on duty: at Berlin Airport -PTO drive: -hydraulic: swiveling -Recording: Three-point -hydraulic: swiveling -Broom width: 2000 mm -Dimensions: 2100/1070/H1060 mm Fgsdpfeb I Iifex Akyoh -Empty weight: 310 kg

Condition: new, Year of construction: 2025, power: 5 kW (6.80 HP), SAPI Premium 200-liter pressure blast machine with cyclone cleaner and abrasive vacuum for abrasive treatment. This blasting system provides a cost-effective, highly economical, and effective solution for open blasting work with semi-automatic abrasive recycling. Open blasting system for manual sandblasting of many different types of workpieces using a blaster with abrasive treatment. The abrasive is collected by hand after blasting and pushed into the collection hopper on the floor. The abrasive vacuum extracts the abrasive from the hopper and pulls it through the cyclone cleaner. The dust is extracted and collected in the dust container of the vacuum. Coarse particles are separated by a sieve. The cleaned abrasive falls back into the vented pressure blast pot and is available for reuse. Our SAPI safety shut-off ensures a safe and economical blasting process. The remote control allows you to start and stop the blast pot using a hand lever mounted on the blast hose package. This is a highly economical and effective solution for open blasting operations with semi-automatic abrasive recycling. The scope of delivery includes: SAPI Premium 200-liter blast pot with 1 1/4" piping, pressure-regulated from 0.1 - 12 bar, max. operating pressure 12 bar High-performance 1 1/4" water separator, permanently installed on the unit SAPI safety shut-off device Cyclone cleaner for abrasive preparation with lifting device Abrasive sieve (inserted sieve in the blast pot hopper) Filling hopper 500x500x380 mm 4-meter connecting hose from the filling hopper to the cyclone cleaner Fgedpfxowc Rcns Akyeh 3-meter connecting hose from the cyclone cleaner to the abrasive vacuum cleaner Abrasive vacuum cleaner 5.5 kW, 400 V, 50 Hz with 70-liter dust container 10-meter blast hose package 25x7 mm, fully assembled with nozzle holder, hand lever, control line, and blast hose coupling Boron carbide Venturi long nozzle (diameter optionally 6 mm) mm, 8 mm or 10 mm)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Soraluce model FL8000 high performance travelling column, floor type CNC milling machine Fodpfx Akjw U Tlzsyogh TRAVEL (X) 7,500 mm TRAVEL (Y) 1,400 mm TRAVEL (Z) 1,000 mm RAPID TRAVERSE (X,Y,Z) 25,000 mm/min WORKING FEED RANGE (X,Y,Z) 1 – 10,000 mm/min ACCELERATION RATE (Instantaneous not maximum) 1 m/sec2 SPINDLE SPEED 20 - 4,000 Rpm SPINDLE TAPER ISO 50 SPINDLE POWER 28 Kw NC15C - HEIDENHAIN iTNC 530 (Flat 15.1" TFT Screen with digital drives). Single processor version. Prepared for a machine of 10 motors (9 CNC axes + spindle motor). Main push button panel with individually operated push buttons for linear axes (X+, X-, Y+, Y-, Z+, Z-) K20 option for the i530M. Independent AC. Heidenhain digital drive servomotor for each axis HEIDENHAIN HR-410 portable electronic handwheel with 5m spiral cable Automatic Indexing head 28Kw, 760Nm, 0.001°x 0.001°, 4000 Rpm. Continuous air and oil mist lubrication system for head gears. Automatic Tool Clamping device – 15,000N. Automatic hydraulic tool releasing device Spindle taper: BT50 High Torque spindle motor 28kW, 100% ED, digital motor. R10 – ZF gearbox two speed including cooling unit Spindle Speed Range 20 – 4,000Rpm Rapid Feed X-Y-Z axes 25.000mm/min Working Feed range X-Y-Z axes 0 - 10.000mm/min Acceleration rate X- Y -Z axes 1 m/s2 (instantaneous, not maximum) Hydraulic counterbalance system for head/ram assembly X axis driving system by two servomotors, two gearboxes and a double rack & pinion Preloaded ballscrews with double recirculating nuts in Y and Z axes. Automatic centralized lubrication system. Linear Guiding System with recirculating cylindrical rollers in each axis. Automatic centralized lubrication system for the guides. HEIDENHAIN Linear measuring scales in X-Y-Z axes with compressed air purge system - (Precision +/- 0,005mm) H48 – Coolant through the spindle type AD. M3 – Automatic tool changer 40 stations. M6 – Horizontal-vertical tool changing facility. M8 – Motorized tool changing device. Tool changer is driven by a servo motor Hydraulic equipment Front metallic roller blind cover to both upper and lower ram area, together with metallic protection to the lateral side of the column, between the machine table and the rear guideway support, which protects the vertical movement of the ram. CE10 - PROTECTION on the back and both lateral sides of the machine column P20 - Operator's platform fixed to the column and travels together with it in the "X" axis direction. The main operator’s panel is mounted within the operator's platform area for machines without an operator’s pendant and is accessed from the rear of the machine. D7 + D50A - Coolant system with 1000L capacity tank with two pumps providing high and low pressure providing 5 & 12bar and 50L/min flow rate. Paper and Magnetic filtering. E30A – swarf conveyor FL8000 Hinge conveyor belt. Width 350mm PW11B – Pendulum working area system. PM2 x 2 – Machine prepared by Soraluce for the inclusion of two rotary tables. Working area lighting. Electrical cabinet cooling system Electrical cabinet lighting Working methods - According to CE safety regulations Filter to assure electromagnetic compatibility. Protection to both sides of the column with security bumpers Anchoring Bolts Standard Colour - Blue RAL 5005 / Grey RAL 7035 K19 – Two sets of machine documentation (One hard copy, one on CD ROM) Floor plate 8,000 x 1,500 x 300mm

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 43,500 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: ABS, AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, power assisted steering, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Heated Mirrors - Leaf Spring Suspension - Differential Lock - Low Noise - Speed Limiter - Air Conditioning - Air-Suspended Seats - Rain Sensor - Rear View Camera - Sunroof - Sun Visor - Toolbox - Power Take-Off (PTO) = Notes = VOLVO FMX13 500 8x4 EURO 6e L13 EuromixMTP Dump Truck 16m³ - 18m³ - 20m³ (HARDOX) Vehicle Equipment: Engine – New D13K500, 12.8 liters, 500 hp at 1,400–1,800 rpm, peak torque 2,500 Nm at 1,000–1,400 rpm Euro6e Transmission – AT2612, 12-speed "I-Shift" automated manual transmission, suitable for gross vehicle weights up to 60 tons Emission Level – Euro VI Stage E Engine Brake – Volvo Engine Brake+ and exhaust pressure regulation, max. retardation D13: 375 kW / D17: 525 kW Wheelbase – 4,350 mm Design Gross Vehicle Weight – 44 tons Drive Axle Ratio – 3.33:1 Front Axle Suspension – 3-leaf parabolic springs Front Axle Load Capacity – 16 tons (2 × 8 ton front axles) Fuel Tank left front – 290 liters, between first and second axle AdBlue Tank – Chassis-mounted on the right, 57 liters, between 1st and 2nd axle Rear Underrun Protection – Aluminum, fixed, slim, EC approved Front Axle Tires – 315/80R22.5 - Drive Axle Tires – 315/80R22.5 Tire Pressure Monitoring System I-See Predictive Cruise Control (map-based topographic data, lower operating settings) Cruise Control – With I-Roll and I-Cruise, operated on the steering wheel Instrumentation – High-performance 12" fully digital instrument cluster DPF Regeneration Switch – for manual control and shutdown Hill Start Assist – DEACTIVATED Electronic Stability Control (ESC) for low center of gravity loads Forward Collision Warning with AEBS emergency braking system Cabin Climate – Electrically controlled air conditioning with sun sensor GSR-compliant, rear-mounted camera on the frame end Toll Preparation Kit for "Toll Collect" in Germany Additional Cabin Insulation – Extra thick insulation layer Cabin Color – Pure White – 1108 White Daytime Running Lights – V-shaped Dump Truck Equipment: Euromix MTP TMK 16m³ - 18m³ - 20m³ Dump Truck (HARDOX) Semi-circular shape CE standard Floor Hardox 450 - 8mm Sides Hardox 450 - 6mm Rear gate pivoting Spare wheel holder with winch Fenders aluminum Versatile lighting options Access steps to the dump body (Access steps: Inside the dump body) EuromixMTP scissor-type tipping stabilizer Accessories: Fodpfx Akozdbzvsysgh Hydraulically opening rear gate Tarp, manual or electric Chute for asphalt Toolbox Shovel and broom holder Fire extinguisher Work lights Sliding tarp, manual or electric, with or without tarp protection cover Folding underrun protection systems Partial discharge for small areas EUROMIX REAR DUMP TRUCK – DURABLE AND ROBUST FOR YOUR APPLICATION! = Additional Information = Year of Manufacture: 2026 Front Axle 1: Steered Front Axle 2: Steered Number of Cylinders: 6 GVWR: 43,999 kg Body Manufacturer: EuormixMTP TMK 18m³ - 20m³ APK (Technical Inspection): New TÜV upon delivery

Condition: new, power: 331 kW (450.03 HP), fuel type: diesel, axle configuration: 8x4, wheelbase: 45,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: AdBlue, Apple CarPlay, Bluetooth, air conditioning, central locking, differential lock, electric window regulation, navigation system, onboard computer, trailer coupling, = Additional options and accessories = - Heated mirrors - Leaf suspension - Bluetooth - Differential lock - Air conditioning - Air-suspended seats - PTO - Reversing camera = Remarks = Mercedes-Benz Arocs Generation 5 4145 8x4 EURO 6e EuromixMTP - Tipper - NEW - without registration - Fjdpeypatuefx Akysgh Vehicle equipment Engine OM471, inline 6, 12.8L, (451 HP), 2100 Nm Euro6e Gearbox G 330-12/ 11.63-0.77, offroad driving mode, PowerShift 3 automatic Front axle 7.5 t, rear axle bevel gear 300 planetary, 13.4 t Front axle tires 315/80 R 22.5, rear axle tires 315/80 R 22.5 Wheelbase 4550 mm Cab: M-Cab Classic Space Disc brakes on front and rear axle Fuel tank: 290 l, left side, 735 x 700 x 750 mm, aluminum - AdBlue tank 25 l Cab rear wall with window - tinted windshield Light sensor - daytime running lights Roof hatch/ventilation flap External sun visor, transparent Multifunction steering wheel Multimedia cockpit Air conditioning Cruise control Vehicle class N3G, off-road vehicle Comfort central locking system Tipper superstructure EuromixMTP three-way tipper EMK3- 14m³ - 16m³ - Type: EuromixMTP EMK3 Tipper body description: Length: 5,900 mm Width: 2,410 mm Side walls: 900 mm Front wall: 1,100 mm Floor: 6mm HARDOX 450 Side walls: 5mm HARDOX 450 Right: manual swinging side wall Rear wall: automatic swinging, 6mm HARDOX 450 Rear wall: 6mm S355 Subframe: welded construction of high-grade steel Hydraulics: - Penta tipping cylinder with end shutoff, - control block (main valve) - pneumatic tipping switch - pneumatic selector valve on subframe - pump and oil tank Options: Hydraulic connection for tipping trailer Broom and shovel with holder Retractable underrun protection at floor level Folding lashing eyes EuromixMTP hydraulically operated Side board lashing eyes in corners Tarpaulin DURABLE AND ROBUST FOR YOUR JOBSITE! For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski = Further information = Year of manufacture: 2026 Front axle 1: Steering Front axle 2: Steering Gross Vehicle Weight: 41,000 kg Body brand: EuromixMTP EMT 14 Contact Denis Omeragic for more information.

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Fedpfx Akozzz Iveyegh Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: AM970083, Industrial arc spraying system Praxair TAFA CoArc 9910 / 9935 / TCV-400 For sale: a used industrial arc spraying system, Praxair TAFA CoArc 9910 / 9935 / TCV-400. Praxair CoArc 9910: The central control console. It features a modern touch display, on which the operator can linearly set and monitor all parameters (voltage, current, wire feed speed, and atomizing air pressure). Praxair 9935: The associated arc spraying gun. It uses a pull principle (or push-pull in combination with the console) to feed the two metal wires precisely and smoothly into the arc. Maximum current capacity: 350 amps at 100% duty cycle. Wire diameter (standard): 1.6 mm (14 ga) or 2.0 mm (or 1/16 inch to 2.0 mm depending on the installed feed rollers and nozzle kits). Spraying rate (throughput): Up to 20 kg/h (e.g., with zinc or zinc-aluminum wires). Wire feed principle: Powerful air or electric motor directly in the gun (pull principle). TAFA TCV-400: Fgjdpfsz Aakrex Akyoh The power supply (inverter) of the system. It is a robust, industrial rectifier (380V/400V connection) that provides constant voltage and the necessary energy to maintain the arc between the wires. The "400" indicates the maximum or rated capacity of the transformer, although the 9910 system is typically operated at up to 350 amps. NH14

Condition: used, Year of construction: 2012, lifting height: 7,870 mm, fuel type: electric, Weights Empty weight: 1.890 kg Functional Lifting capacity: 227 kg Working height: 987 cm Dimensions of cargo space: 234 x 84 x 225 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Fgsdpjwd Nppjfx Akyoh Other information Delivery terms: EXW Production country: CA Additional information Please contact Christian Theißen for more information Manufacturer: Skyjack Model: SJIII3226 Year of build: 2012 Condition: Used Data: Max. working height: 9,87 m Platform height: 7,87 m Lifting capacity: 227 kg Lifting capacity on extension: 113 kg Platform dimensions LxW: 2,14 x 0,71 m Platform lenght pushed out: 2,98 m Total dimensions LxW: 2,34 x 0,84 m Height transport position with railing: 2,25 m Height transport position without railing: 1,90 m Movable up to working height: 9,87 m Ground clearance: 0,07 m Drive type: Battery Only indoor using: yes Own weight: 1.890 kg Special features: white tires, anchorage points for restraint systems (PSA) available. Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2011, lifting height: 2,010 mm, fuel type: electric, color: red, Weights Empty weight: 1.514 kg Functional Lifting capacity: 227 kg Working height: 770 cm Dimensions of cargo space: 190 x 76 x 115 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: GS1932 Year of build: 2011 Condition: Used Data: Fgodpjv Tifqefx Akyjh Max. working height: 7,70 m Platform height: 5,70 m Lifting capacity: 227 kg Lifting capacity on extension: 115 kg Platform dimensions LxW: 1,64 x 0,75 m Platform lenght pushed out: 2,59 m Total dimensions LxW: 1,90 x 0,76 m Transport height with / without railing: 2,01/1,15 m Movable up to working height: 7,70 m Ground clearance: 0,07 m Drive type: Battery Own weight: 1.514 kg Special features: white tires, attachment points for restraint systems (PSA) available. Location: 41468 Neuss immediately available

Condition: used, functionality: fully functional, machine/vehicle number: H2X387J00413, Year of construction: 2018, operating hours: 4,417 h, load capacity: 3,500 kg, lifting height: 3,515 mm, fuel type: electric, mast type: duplex, empty load weight: 5,551 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: H2X387J00413 Mast type: Duplex Condition: Like new Technical condition: very good Front tire type: Solid rubber Front tire condition: 80 - 100% Rear tire type: Solid rubber Rear tire condition: 80 - 100% Battery type: PzS Description: German: Linde E35L-01 No.: R0826 Year of manufacture: 2018 Operating hours: 4,417 h Lifting capacity: 3,500 kg Lifting height: 3,515 mm Mast: Duplex Battery: 80 V Equipment: Side shift, fork positioner, 3rd and 4th hydraulic valve, front and rear work lights, LED lighting, full cabin with heating and air conditioning, windshield wiper, rotating beacon, and interior mirror. Tires: Solid rubber, condition front and rear 80–100%. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English: Linde E35L-01 No.: R0826 Year of manufacture: 2018 Operating hours: 4,417 h Lifting capacity: 3,500 kg Lifting height: 3,515 mm Mast: Duplex Battery: 80 V Equipment: Side shift, fork positioner, third and fourth hydraulic valve, front and rear work lights, LED lighting, full cabin with heating and air conditioning, windscreen wiper, rotating beacon, and interior mirror. Tyres: Solid rubber, condition front and rear 80–100%. Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Fedsz A Ipyepfx Akyjgh Push forks, side shift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, air conditioning, interior mirror, rotating beacon, windshield wiper, LED.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 200 V, pressing force: 160 t, table length: 600 mm, overall weight: 19,000 kg, punching force: 160 t, height adjustment type: electric, installation height: 1,900 mm, ram adjustment: 100 mm, stroke adjustment: 130 mm, Equipment: documentation/manual, safety light barrier, Manufacturer: AIDA Type: NC2-160 Push force: 160t Year of manufacture: approx. 1991 Stroke length: 130mm Distance above table: (adjustable) 285-335mm Table size: 1900x600mm Bear size: 1360x585mm Electric power: 3x200V(!!), 15kW - Japanese standard Fsdou D Dhxepfx Akyegh Net weight: 19000kg Size: 2140x2210x3175mm Automatic greasing system. Optionally sheet feeder winder and straightener.

Condition: used, first registration: 05/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo Fgedjy Dmu Njpfx Akyoh * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: used, Year of construction: 2022, Exhibition machine Year of manufacture: 2022 Equipment and technical data: > Solid German engineering for jointing and rabbeting, including concave and convex profiling > Adjustable rabbet depth for PLANER WIDTH up to 510 mm and max. chip removal up to 8 mm > Ergonomic working position directly at the cutterblock > Panhans four-knife cutterblock with strip-type planing knives and adjustment tools > Finely planed cast iron table, total table length 2850 mm > Control panel at eye level with digital display of chip removal, current outfeed table position (neutral, concave and convex profiling), including template holder and practical tool storage > Electrically adjustable infeed table via push buttons > Concave and convex profiling adjustment on the outfeed table > Toothed table lips for noise reduction > Adjustable fence in depth and angle via a single lever, adjustable up to 45° and mounted in an extremely smooth steel guide > Anodized fence ruler > Swivel auxiliary fence type 1545 Fgjdpfxjzz Tznj Akysh > Console for feed mechanism > Bridge guard TXF type 1570 with folding cover > Automatic star-delta starter, motor circuit breaker > Planed in our workshop Planer width: 510 mm Infeed table length: 1620 mm Outfeed table length: 1170 mm Total table length: 2850 mm Motor power: 5.5 kW / 7.5 HP Cutterblock speed: 5000 rpm Dust extraction port: 160 mm Voltage: 400 V / 50 Hz Footprint: 2850 x 1420 mm Color: Light gray RAL 7034 and violet-blue RAL 5000 Weight: approx. 1050 kg Includes: Full steel Tersa cutterblock > Automatic motor brake Location: Flörsheim Availability: Short notice

Condition: excellent (used), mileage: 133,000 km, power: 294 kW (399.73 HP), first registration: 12/2016, fuel type: diesel, axle configuration: 8x2, fuel: diesel, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, number of gears: 16, emission class: euro6, total length: 11,610 mm, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 15 m³, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, - Brake booster - Remote-controlled central locking - Refrigerator - Air suspension Fgsdezr Ht Eopfx Akyjh - Air horn - Radio/CD player - Reversing camera - Sun visor - Toolbox - Xenon lighting - Central lubrication Manufacturer: WIEDEMANN Model / Sales designation: SUPER 1000 15 Equipment number: D/BAM/1666/T Factory No.: X OW 1000 1494 Year of manufacture: 02.12.2016 Equipment: Suction / pressure tank body ADR Sludge compartment – variable size, rear closure floor and front torispherical head made from stainless steel, material 1.4404, sludge tank in stainless steel, material 1.4404, auxiliary tipping device, sludge tank lid/ADR, sludge tank lid – hydraulically opening, central locking pneumatically operated, level indicator with scale at the tank bottom, lower suction connection with gate valve DN 125 reduced to DN 100, lower suction connection pneumatically actuated, upper suction connection with gate valve DN 125 reduced to DN 100, hydraulic telescopic piston, display of 3 pre-set piston positions, ADR equipment, tank code L4BH (without heat recovery), splash partition in stainless steel 1.4301, vacuum pump type CVS VACUSTAR 1600 – DN 100, overfill protection, vacuum pump cooling, oil separator and silencer, vacuum pump flushing device, vacuum system piping, safety fittings and fittings DN 125, suction hose reel 25 m DN 125, special spiral suction hose 25 m / DN 125, oil-resistant, transport hose reel 40 m DN 80 (side-mounted), suction and high-pressure (HP) boom, retractable suction and HP boom, water compartment – variable, water filling device, hand washing device, warm, level control – Plexiglas sight glass for water compartment, high-pressure pump type URACA P 345-60, HP system protection, high-pressure reel 220 m DN 25 or 180 m DN 32, at the boom, high-pressure hose 180 m DN 25, rubber (GrüloKan 250), large automatic winding device, pressure roller – large HP reel, meter counter, high-pressure reel 80 m DN 13, hydraulic, high-pressure hose 80 m DN 13, rubber (GrüloKan 250), water shortage protection, pneumatic system, three-stage hydraulic system, centralized lubrication system, hydraulic winch, electrical system, reversing camera system with 2nd camera, engine can be started from control panel, PLC/CAN-BUS control, control cabinet with display, radio remote control with display, equipment cabinet with single flap – one side, insert tubes for suction hoses, pump room sound enclosure, full side paneling, toolbox approx. 800x500x500 mm, stainless steel, 3 work lights (LED), 2 revolving warning lights – flashing version, operating hour meter for HP pump; operating hour meter for vacuum pump, compressed air connection, spring cable pull, ladder, ladder holder, shovel, broom, and manhole hook Next inspection dates: General inspection (HU): 01 / 2026 Section 57b test: 05 / 2025 Safety inspection (SP): 07 / 2025 GGVSEB/ADR inspection: 02.01.2026 Tank inspection: 12 / 2027 German registration In very good condition! Immediately operational Transmission Transmission: ZF, 16-speed manual transmission Axle configuration Front axle 1: steered Front axle 2: steered Rear axle 1: steered Weights Unladen weight: 21,952 kg Payload: 10,048 kg Gross vehicle weight: 32,000 kg Functionality Body make: Wiedemann Super 1000...

Year of construction: 2021, condition: used, For inquiries regarding the attachment, please contact Mr. Herden at [phone number]. Optimas PlanMatic Pro PM 200 2D / Zettelmeyer wide attachment / Year of manufacture: 2021 / In stock & immediately available / Very good condition Price: €24,890.00 net / €29,619.10 gross - Basic width: 2.00 m - Working width (hydraulically adjustable): 2.00 m to 2.60 m - Dead weight: 780 kg Attachment: - Zettelmeyer wide Additional features: - 2D control (see photos) - Leica MLS 820 laser - Leveling through backward and forward movement - Simple operation – short training time - Side flaps hydraulically adjustable - Simple & intuitive: A central joystick with a large display shows only the relevant information – for uncomplicated operation - Flexible & storable: Up to 46 device settings can be saved – ideal for changing carrier devices - Quick start: Automatic retraction of the blade to the 0 position at the push of a button In our warehouse, we have a very large selection of various attachments that are immediately available! Mr. Herden (Tel. [phone number]) will be happy to assist you. Upon request, we will also be happy to provide you with a financing offer. We are an official Magni telehandler sales and service partner. We are an official OilQuick sales and service partner. We are an official Holp sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Gierking GMT sales and service partner. We are an official Weber MT sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. Fgjdpfx Akez Efnxoyeh We supply the complete Magni range for you! Errors and prior sale excepted! Internal No.: 200443 = Further information = Unladen weight: 780 kg Please contact Marius Herden for further information.

Condition: new, mileage: 500 km, power: 382 kW (519.37 HP), fuel type: diesel, overall weight: 33,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, MAN TGS 33.520 BL 6x4 CH chassis cab – new vehicle with day registration, 33t variant, 6x4 drive, wheelbase 3.60 m, 520 hp, with PTO, air conditioning, auxiliary heater, trailer coupling with 50 mm pin, manufacturer’s warranty, and much more. MAN manufacturer warranty valid until 16/12/2026 MAN ATS warranty valid until 16/12/2027 Commercial tonnage: 33 tonnes Permissible gross weight: 26,000 kg Permissible total vertical load (Tech. Plus): 28,000 kg Mileage approx. 1,335 km (transfer mileage) Medium height design Short NN cab Diesel engine with 382 kW (520 hp) output and 2,650 Nm torque 6x4 drive Wheelbase 3,600 mm, 800 mm rear overhang Differential locks on rear axles MAN TipMatic 12.28 OD automatic transmission PTO, gearbox-dependent, type NTX/10c, without flange, f=1.15, position approx. 3:30 o’clock High-performance engine brake MAN EVBec, multi-stage Transmission function MAN EfficientRoll Transmission function rocking/free-swinging Transmission function MAN Idle Speed Driving Transmission for increased push/pull share in driving operation MAN TipMatic driving programs: Performance and Efficiency up to 70,000 kg MAN TipMatic driving program: Offroad up to 70,000 kg Fgedpfxsz Edxps Akyjh MAN TipMatic Manoeuvre mode, shunting function Creeper function MAN EasyStart MAN ComfortSteering system Full brake assist Emergency brake assist EBA Lane Departure Warning LDW Driver alert system MAN AttentionGuard Offroad ABS with additional terrain logic EBS, ASR, ESP Front axle leaf sprung, rear axles air suspended Front axle: 9,000 kg, Rear axle: 13,000 kg Front axle spring capacity: 9,500 kg Stabilisers and shock absorbers on front and rear axles Axle ratio i=4.00 Trailer coupling ROCKINGER type 500 G 6B for trailer load up to 24,000 kg (Tech. Plus) Permissible gross combination weight (Tech. Plus): 44,000 kg Climatronic 4 kW water auxiliary heater Cruise control Multifunction steering wheel Sun visor Roof hatch 2 LED work lights behind cab roof 2 beacons on cab roof LED daytime running lights LED rear lights and side marker lights 2 LED contour lights and side indicators Electrically adjustable and heated exterior mirrors Electric windows MAN EasyControl operation panel, 4 functions, operable from outside with door open Air-suspended and heated driver comfort seat Comfort seat covers Smartphone integration MAN Sound System Advanced MAN Media System Advanced Navigation 7 inch New vehicle, day registration on 16/12/2025, with MAN manufacturer's warranty Net price plus 19% VAT. Attractive financing offers available on request. All information provided without guarantee. Subject to error and prior sale. Internal vehicle number: 2571