Used Push Broom for sale (1,405)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 131.2 cm Guodpfxoz Slifj Amtoh - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total length: 1,280 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 128 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : Godpoz Sly Rsfx Amtouh If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Equipment and technical data: BASIC MACHINE DYNESTIC 7507 10.7_Push Machining length 3100 mm (without tools) Machining dimension in the Y-direction 2200 mm CAMPUS V7 CAD/CAM software, 1 license incl. CabinetControl Base and material removal simulation upgrade "CAMPUS ""Better Nest"" free-form nesting software" Uninterruptible power supply (UPS) Milling spindle 7830, power: 10.3 kW (S6/40) Sensor package Chipcontrol for 3-axis spindle incl. receiver 7884 Drilling unit, complete, 14 spindles, drive power 3 kW Integrated sawing unit for sawing/grooving in the X-direction n(max.) 1000-7330 min-1, continuously adjustable 1 stop bar at the rear for the machining area (field D) at the rear with 1 lateral stop (replaces lateral stops at the rear) Stop monitoring for 5 standard stops at the rear and on the right Tool changer 7873, 6-position linear pick-up, pneumatically liftable with cover for the HSK tool holders, integrated 2 additional holders for HSK tool holders for the tool changer 7873. Tool changer 7872, 1-position tool magazine, swiveling in the X and Y directions 2 x vacuum pump 140 m³/h, dry-running Vacuum unit complete, (VP8) 250 m³/h, 400V additionally (upgrade) Vacuum connection complete, 16-circuit vacuum VF16 LASER, RIGHT COMPLETE POINT LASER COMPLETE OPTION ZB8 Lubrication complete, central lubrication, sensor side 2 x vacuum suction cups for smooth table surfaces, complete, 140 x 115 mm, height 30 mm with connection hose 2 x vacuum suction cups for smooth table surfaces, complete, 120 x 50 mm, height 30 mm with connection hose Conveyor belt complete, push-out conveyor AUT 5 10.7, push-out table Additional extraction system via push-out conveyor Push-out device on the moving carriage, controlled incl. simultaneous extraction of the wear plate Guedpfx Amjygn Ibetoh Label printer Direct Label 7507 and complete touch label light option ZB74 TouchTool tool length measurement Availability: From approximately December 2026 Location: Bavaria

Condition: used, Year of construction: 2017, functionality: fully functional, We offer this used Weinig Automatic Stacker, model Deck Stacker, manufactured in 2017. Video of the machine in operation is available. Manufacturer: Weinig Model: Automatic Stacker Year of manufacture: 2017 Condition: Used Category ID: 164 Type ID: 2293 Machine type: Deck Stacker Weinig Stacker – in perfect condition! Weinig is a global leader in the industry. This is not a budget machine; it is a premium-class machine that retains its value and operates reliably for years. For sale: a compact Weinig deck stacker in very good condition. Gjdpfxjz N H Tfs Amtsuh It is entirely in its original paint, unmodified, and well-maintained. Key features: • Stacking length range: from 40 cm to 1.5 m • 4-5 layers per minute • Capability for herringbone stacking • Storage for spacers • Quick and easy adjustment of stacking dimensions • Additional milling wheel – can be mounted to push material off the line and onto a conveyor belt • The machine is in continuous working order Opportunity to view and inspect the machine in operation. If you have any questions or require additional information, please send a message or contact us by phone.

Condition: used, Year of construction: 2025, functionality: fully functional, BK automation robotic cell with a Yaskawa robot arm, safety enclosure, and conveyor belt. Equipped with a control panel with a screen and a signal tower. Details: Brand: BK automation Robot/robot controller brand: Yaskawa Construction: stainless steel frame with transparent shielding (plexiglass) Function: packaging of small units by folding, gluing, and sealing boxes Transport: conveyor belt(s) Operation: control panel with screen, push buttons, and emergency stop Signaling: signal tower (red/yellow/green) Marking on machine housing: BK automation Gujdpfx Asz Ip R Njmtoh Dimensions: 475x155x235 cm Accessories: various additional holders in different sizes Condition: used Please note: disassembly and removal costs are mandatory for this lot and will be borne by the buyer. An external company (Auction Logistics) will handle the disassembly, prepare the item for transport, and load it onto your truck. These costs will be fully borne by the buyer. For this lot, these costs amount to €325, excluding VAT.

Condition: excellent (used), functionality: fully functional, function tested; item comes from dismantling equipment of an automotive supplier Manufacturer: Siemens Gsdpfx Amow Ifc Ssteuh SINUMERIK Push Button Panel MPP 1500D Connection: Industrial Ethernet AND PROFINET with connector for HT8

Condition: used, mileage: 34,043 km, power: 395 kW (537.05 HP), first registration: 01/1999, overall weight: 55,200 kg, fuel type: diesel, color: white, empty load weight: 26,400 kg, gearing type: automatic, suspension: other, Year of construction: 1999, operating hours: 34,043 h, Equipment: additional headlights, air conditioning, hydraulics, parking heater, Towbarless PushBack: - Goldhofer - AST-1 A500 - Year of construction 1999 - 34,043 operating hours - Liebherr D9408 TI-EA3 engine, 8 cylinders, 395KW, 17.180ccm, Configuration: 988 1201 Gedpjqxt I Tefx Amteuh - Hydrostat (Vmax 30km/h) - Unladen weight: 26,400kg; permissible GG: 55,200kg - Air conditioning - Auxiliary heating - Swivel seat system - StrobeLights left / right Aircraft types: Airbus: - A200 - A300 - A310 - A330/340 - A500 - A600 Boing: - B747 - B767 - B777 - B787 McDonenell Douglas: - DC-10 - MD-11 The pushback is currently running in the "emergency driving program" - a data transmission error is displayed You can find a video of this offer on You can find our entire vehicle fleet at Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Year of construction: 2020, condition: excellent (used), Stationary Piston Compressor Aircraft AIRPROFI 703/270/10 V Used: Year of manufacture 2020 - Top condition - Stationary compressors with a vertical 270 l tank offer maximum performance in a compact space. Robust design and best quality Fully automatic on/off operation Equipped with all safety devices Completely ready for connection Fifteen-year guarantee against rust on the internally and externally hot-dip galvanized compressed air tank Quality electric motor High-quality electric motor with high starting torque is equipped with a motor protection switch Starting capacitor and starting relief valve ensure easy starting Standard equipped with a phase inverter for easy manual reversal of the direction of rotation Compressed air compression via high-performance HOS unit The starting relief valve ensures easy, pressure-free starting The two-cylinder high-performance unit made of gray cast iron and the low speed guarantee particularly quiet and low-vibration operation; this ensures a long service life due to minimized wear Optimal lubrication of the compressor for high service life and reliability Equipped with a high-quality intake filter Aftercooler with large cooling fins results in a low tank inlet temperature and less moisture in the compressed air to protect the compressed air tools Additionally with an intercooler to the aftercooler Corrosion-resistant valve plates for improved heat dissipation and longer service life of the compressor Optimal cooling of the compressor by a large fan wheel and a cooling air deflector on the cylinder Stable metal belt guard for optimal protection of the components and for high user safety No vibration breaks in the compressed air supply line to the tank due to flexible armored hose with heat protection High-quality drive belt Powerful and efficient drive The toothed drive belt facilitates starting, improves running smoothness and power transmission, and reduces power consumption by up to 30% Stable metal belt guard Operation on the service block Equipped with a high-quality CONDOR pressure switch with a robust push-button function for fully automatic on/off operation Air outlet on the service block via a comfortable safety quick coupling Only fixed screw connections on the service block, no hose connections Guedpfoz Rq Euex Amtoh High-quality tank with permanent rust protection Air outlet ¾" Length (product) approx. 780 mm Width/Depth (product) approx. 680 mm Height (product) approx. 1870 mm Weight (net) approx. 152 kg Automatic pressure switch CONDOR Drive transmission V-belt, toothed Material of compressed air line Flexible armored hose with heat protection Compressed air outlet Ball valve Condensate drain Condensate drain valve Compressed air tank Internally and externally hot-dip galvanized with a fifteen-year guarantee AD 2000 compliant yes Tank base Vibration dampers Connection plug 400V CEE plug with phase inverter Connection voltage 400 V Mains frequency 50 Hz Output power 4 kW Input power 4.81 kW Sound pressure level Lp 83 dB(A) Explanation of sound pressure level Sound pressure level at a distance of 1 m according to DIN 45635 T 13 Compressor system HOS Intake capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation of filling capacity at 6 bar working pressure Number of cylinders 2 Number of compression stages 2 Compressor speed 950 min¯¹ Maximum pressure 10 bar Tank capacity 270 l Location: available from stock in 54634 Bitburg - immediately available -

Condition: good (used), functionality: fully functional, functionally tested; the item originates from the dismantling of equipment from an automotive supplier Gujdpfx Amsyq Sdneteh SINUMERIK Push Button Panel MPP 1500D Connection: Industrial Ethernet AND PROFINET with interface for HT8

Condition: used, Year of construction: 2010, load capacity per storage section: 300 kg, We are offering a used Medek pallet racking system / push-back racking system, type Boltless XL, manufactured in 2010, from our own inventory. Technical data: – Manufacturer: Medek – System/Type: Boltless XL push-back racking – Year of manufacture: 2010 – Total length: approx. 10.0 m – 18 push-back channels – 7 pallets per channel – a total of 126 pallet spaces – permissible pallet weight: max. 300 kg per pallet The racking system is in used condition and has been regularly inspected during operational use. The racking is currently fully assembled and can be inspected by appointment at our location in 63165 Mühlheim am Main. If required, an additional racking inspection can be carried out before delivery. Dismantling, loading, and transport are the responsibility of the buyer and will be carried out at their own cost. The racking is sold in its current assembled condition. Technical data on the system, year of manufacture, and maximum pallet load are documented on the existing nameplate. Further detailed photos and available documents will be provided upon request. Price: €5,500 net plus statutory VAT – negotiable. Location: 63165 Mühlheim am Main, Germany Delivery terms: EXW / from location Sale exclusively to businesses. Godpez Ah E Defx Amtjuh

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 221005, functionality: fully functional, Technical Data – AICHELIN Pusher Furnace System Gjdpfozf Upnjx Amtsuh Manufacturer: AICHELIN Type: DHLG-50/50/50 System Type: Gas-heated Pusher Furnace Year of Construction: 2012 (system) Control System: Siemens S7-400 Machine No.: 221005 Electrical Data Connected Power: 261 kW Rated Current: 383 A Supply Voltage: 400 V / 50 Hz Furnace Data Heating: Natural Gas Max. Furnace Temperature: 500 °C Protective gas operation possible Continuous pusher operation Batch Data Max. Batch Weight: 10,000 kg Continuous heat treatment of large series components Application Area Hardening Tempering Stress-relieving annealing Preheating Heat treatment of forged and cast parts Gearbox and drive components Equipment Siemens S7-400 control system Automatic loading and pusher system Gas-heated industrial furnace Protective gas atmosphere possible Fully automatic series operation Typical Applications Automotive industry Forging operations Gearbox manufacturers Heat treatment companies Supplier industry Special Features Very high batch capacity of up to 10 tons Modern Siemens PLC control system Energy-efficient gas heating Suitable for high production volumes in 3-shift operation Ideal for the heat treatment of gearbox parts, shafts, gears, and forged parts This AICHELIN DHLG-50/50/50 is a modern industrial heat treatment system and is significantly more valuable than a comparable standard tempering or chamber furnace. The system is particularly interesting for forging companies, gearbox manufacturers, foundries, and contract heat treatment companies.

Condition: excellent (used), Year of construction: 2026, machine/vehicle number: 62401, functionality: fully functional, total length: 7,050 mm, total width: 2,550 mm, total height: 2,500 mm, overall weight: 3,400 kg, Dry wood chips, firewood and other coarse, wet biomass in a container that goes straight onto your truck, with warm air blown through the perforated floor. This Lauber TroCo drying container was built in 03/2026 and has been used only three times by us. It is in very good condition and ready to dry. Only one unit available. This is a single used machine, not ongoing stock. Once sold, it is gone. Best for: drying coarse, wet biomass such as wood chips, firewood and other coarse plant material, then moving the container to where you need it with a hooklift truck. Not suitable for: finely ground bulk material unless you verify it with us first. A warm air source and the air hose are not included, you need to supply them. What the specifications mean in practice: - 34 m3 volume - one large batch per drying cycle instead of many small ones - Hooklift system (locking dimension 3,890 mm) - load, move and unload with a standard hooklift truck, no crane needed on site - Perforated ventilation floor with round air connection at the door end - warm air is pushed up through the whole load, so it dries evenly - Fitted tarp cover - keeps rain out during storage and transport - Rear rollers and ladder steps on the front - easier to roll off and to inspect the load - Gross weight rating 21,000 kg - heavy loads are no problem for the frame Technical data (from the nameplate): - Manufacturer: Lauber Trocknungstechnik, type TroCo, serial no. 62401 - Year built: 03/2026 - Volume: 34 m3 - Length: 7,050 mm, height: 2,500 mm - Empty weight: 3,400 kg, permissible gross weight: 21,000 kg - Locking dimension: 3,890 mm - Colour: yellow - Safety inspection label (DGUV Rule 114-010) from the container builder is fitted, see nameplate photo Condition: Built 03/2026, used only three times by us, very good condition. Fully functional. Location: Stanserstrasse 50, 6064 Kerns (self pick-up, transport by arrangement). A hooklift truck, a suitable forklift or a crane is needed for loading. The container weighs approx. 3,400 kg empty. Why you can buy with confidence: - Built 03/2026, used only three times - Used by us, not rented out - Nameplate photos available, in-person inspection in Kerns OW by appointment Guodjz I Dzispfx Amteh Inspect before you buy: you may verify identity, condition and completeness at inspection or pickup. We guarantee what we control: the machine is what this listing says it is. We do not promise performance in an application we cannot assess, which is why we ask about yours first. Why buy now: This is a single used unit. Once sold, it is gone. Inspection is available in Kerns OW by appointment. First-buyer bonus: buy within the next two weeks (until 20 October 2026) and we take CHF 500 off the price. Valid until 20 October 2026, or until the machine is sold. Action: Send us your intended material, batch size and destination. We will confirm suitability and give you a transport estimate.

Condition: used, Year of construction: 2019, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity forklift: 2,500–5,000 kg Fork length: 1,350–2,000 mm Mounting: FEM 3A MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,350 x 800 x 1,000 mm Net weight: 250 kg EQUIPMENT Hydraulic telescopic forks For loading onto a pallet for truck loading All dimensions are approximate. No guarantee is given for typographical or measurement errors. Collection conditions: Side loading up to 6 tons is possible using a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 tons and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Gusdpfxez Iw Hxs Amtoh Collection without prior notification is possible from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Any outstanding storage fees must be paid in full before collection. Lot number: 1103

Condition: ready for operation (used), Year of construction: 2011, Road sweeper SMB Sobernheimer UKM 2.2, year of manufacture 2011, serial number 550069, water tank, debris container, side brushes, the brush discs are new, mounting for Liebherr Volvo CAT, water spray system presumably defective, 4 wheels need to be replaced. Guedpfxsixnrrs Amtjh

Condition: ready for operation (used), Year of construction: 2011, Sobernheimer UKM 2.0 sweeping broom, manufactured in 2011, with water tank + debris container, compatible with CAT 908 and other manufacturers, water pump likely defective, cable defective, serial number 53096. Gjdpfx Amohzw Tpotjuh

Condition: used, Rotating chuck collet holder for pressure collets Guedpfx Amozqgl Esteh Collet chuck, collet holder Chuck flange: short taper DIN 55027 size 5 (with 4 tightening bolts M10), taper bore approx. Ø 82 mm Pressure collet type: F 48 / 173E DIN 6343 Large taper diameter: Ø 60 mm Small taper diameter: Ø 48 mm Collet taper: 30° Collet length: 94 mm - 2 pressure collets: 1x Ø 20 mm round collet, 1x 30 mm hexagonal collet Weight: 11.5 kg Good condition

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: VKE / FLPS2 – 4APC/S, type of input current: three-phase, Automatic Vertical Strapping Machine VKE / FLPS2 – 4APC/S Current Status & Availability: The strapping system is fully operational and is currently still in daily use. Availability: The entire system is currently fully integrated into the production process and can be inspected under operating conditions after prior arrangement. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47 / 2026. Technical Data: Pallet Types: Pallet width 500 to 1000 mm Pallet length 600 to 1200 mm Package height (incl. pallet) min. 500 - max. 2000 mm Conveyor height 500 mm Weight (incl. pallet) 150 to 1000 kg Package stacking method: automatic Under-stretching: no Conveyor speed: 12 m / min Pallet transport direction: lengthwise onto lengthwise boards Centering accuracy: centered on the stop light barrier Machine Components: Pneumatics: Festo Gear motors: SEW Control system: PLC S7-200 Control cabinet: Rittal Protection class: IP 55 Main switch: Möller Fuses: Siemens Relays: Omron Push buttons: Siemens Signal lights: Telemecanique Light sensors / light barriers: Datalogic Inductive proximity sensors: Omron / Siemens Cam switches: Siemens Contactors: Telemecanique Gujdpoy Szflefx Amtjh

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, total height: 6,500 mm, 1x Pallet flow rack by Bito, fully functional. Capacity for 96 pallet positions. Year of manufacture: 2021. Basic dimensions: W 10.20 m - D 5.20 m - H 6.50 m. Pallet weight min: 250 kg, max: 1000 kg. Channel width / beam length: 2400 mm. The floor-level roller tracks are foldable for flexible cleaning access underneath (see picture no. 4). Gujdpfxew Az Emj Amtoh Inspected and serviced annually. The system is already dismantled and in storage. Europe-wide shipping available for an extra charge.

Condition: used, first registration: 08/2020, Location: Künzell Equipment Single-layer paint, three-axle, ladder for easy access to the tipper body, centrally positioned grain slide with cover, 2 pneumatic roller vibrators, ALCOA aluminum wheels, sliding tarp with electric operation and remote control, tipper body 24/3, steel support struts, bracket for broom/ladder. Description of damage Guedpfx Aoz Siq Homteh The vehicle in question exhibits extensive damage as a result of significant mechanical impact. The tipping cylinder has been completely torn off, rendering the tipping mechanism inoperable. The tipper body shows clear deformations in the area of the structural plates and supports, indicating a strong force impact. The tarp is damaged and shows cracks and deformations, making proper use impossible. Furthermore, the main frame of the vehicle is deformed, indicating a structural impairment of the load-bearing structure. The rims on the left side of the vehicle have been impacted and show visible damage, making further safe use impossible. Additional damage can be seen in the image documentation and includes further deformations, tears, material cracks, and possible consequential damage to adjacent components. The totality of the damage indicates a significant damage event that significantly affects both the functionality and the roadworthiness of the vehicle. Overall condition: Apart from the described damage/defects, the vehicle/object is in a generally acceptable condition, considering its age and use.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,600 mm, overall weight: 14,000 kg, Veneer stack cutting machine / Veneer shears with 4 knives Manufacturer: Monguzzi (Fisher+Rückle) Type: AFV-42-3600 Year of manufacture: 2024 Hydraulic veneer shears with 4 knives for trimming and edging veneer stacks Typical applications: Veneer mill, veneer trade, veneer cutting, furniture and interior design with solid wood veneer Cutting range: Cutting length approx. 3600 mm 4 knives (2 upper and 2 lower knives), individually selectable Hydraulic pressure beam with 2 cylinders Hydraulic pressure switchable 45 bar / 90 bar Axes and drives: Positioning axes X and X2 (left / right) with stepper motor control Axis Y with frequency inverter 1.5 kW and brake Register adjustment with frequency inverter 0.75 kW and brake Register adjustment also via foot pedal Conveyor belt Line laser Hydraulics: Hydraulic unit with tank capacity 300 l Proportional valve Filter monitoring (contamination indicator) Gusdez I Tipjpfx Amtoh Control: PLC control with touch panel (esaware) Manual operation, automatic cutting, parameters, diagnostics, alarm history, programming Control panel with push buttons and emergency stop Safety: Emergency stop safety relay Pilz PNOZ X3 Light curtain with safety module Datalogic SE-SR2 Two-hand operation Electrical connection: 400 V, 50 Hz, 3P + PE Current consumption approx. 22 A Fuse 25 A Control voltage 24 V DC Basic concept: - Veneer stack cutting machine with 4 hydraulically operated knives - Pressure beam for fixing the veneer stack during cutting - NC positioning via the X, X2 and Y axes - Waste flaps for scrap - CE declaration of conformity according to Machinery Directive 2006/42/EC available, as well as documentation and circuit diagrams available Weight approx. 14,000 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 1, type of input current: three-phase, Machine components: 1. End-jointing machine a. Infeed frame with 2x 2018 “Unigripper” Pneutec 38960 vacuum lifting bar 100x8 cm Gujdpfoz Rkbcsx Amtjh b. Infeed roller conveyor with grippers c. “Meler” B4 VS glue melting unit d. Crosscut saw Ø 300 mm and 2004 2. Parquet gluing machine a. Buffer b. Glue roller c. Stacking mechanism d. Capacity: width of 100 mm - 300 mm, length up to 3000 mm, and thickness of 9 - 12 - 15 mm e. Traverse carriage 3. Glue presses Option 1: Crosscutting to pre-set lengths In the end-jointing machine, pre-cut plywood strips are placed in a buffer using vacuum bars. A strip is fed from the buffer along a hot melt glue head. Hot melt glue is applied, and the strip is pressed against the tail of the preceding strip. The end/tail-jointed strips are crosscut to pre-set lengths. The crosscut strips are fed through and coated with PVAc glue using a glue roller. (If there is no operator request, the buffer is filled.) The glued plywood strip is manually or automatically pushed onto the stack. A top layer is then placed on the glue. A stack is formed with a maximum height of 60 cm. (For varying lengths, spacers are placed between the different lengths.) Using the traverse carriage, the stack is moved in front of one of the six presses. The stack is pushed into the press, and using the conveyor belt, the stack is guided into the press. The stack can now be pressed. Using the switch, the press beam moves down, and using the rotary knob, the pressing force can be adjusted. Option 2: Gluing to standard lengths without crosscutting Using a separate computer program, the machine can also operate without end-jointing. When the length of the top layer and the length of the plywood match, the end-jointing can be disabled. The operation of the machine is then the same as in Option 1, but no glue is applied at the end, and the strips are not crosscut by the saw. Last modification to the machine: 2018 YouTube video: shorts/VhgYFOVvSfY?feature=share

Condition: not inspected (used), Shelf rack, steel, galvanized, dimensions: 6,000 x 3,500 mm, 6 uprights, 36 supports, with stock of: cable glands, pressure compensation elements, nuts, separation clamps, contact elements, spiral cables, relays, circuit breakers, emergency stop switches, push buttons, corrugated conduits, transformers, housings, and more. Gusdpfoz R Nvyjx Amtjh

Condition: good (used), machine/vehicle number: Nr. 94/1223. Nr. 94/1222, Ess pusher unit for transformer sheets I 30-150 Ess pusher unit for transformer sheets E 30-84 Gjdoylp Utepfx Amteuh

Condition: used, TOX Type: TZ-VSN TOX – Full-Punch Riveting System The full-punch rivet initially separates all joining partners and then pushes the punched-out section out of the joining point. With its innovative technology for full-punch rivets, TOX PRESSOTECHNIK, the specialist for sheet metal joining, is expanding its range of products and services to include a future-oriented process. Full-punch riveting offers an additional mechanical sheet metal connection that is of great importance for lightweight construction and the joining of hybrid parts and assemblies. The rivet feeders, tongs, and tool holders are also designed to be so universal that full-punch rivets with diameters of 4.0 mm and lengths between 3.3 and 8.1 mm, as well as full-punch rivets with diameters of 5.0 mm and lengths between 3.9 and 9.0 mm, can be processed flexibly with both TOX hand tongs and TOX robot tongs. Press force: 55 kN Total stroke: 140 mm Rivet type: Diameter 5 x 4.6 Connection values Godpfx Aszdtffomtsuh Power: 3.4 kW Mains connection: 400/15/50-60 V/A/Hz Speed: 200 mm/s Mains type: 3P+N+PE Control voltage: 24 V DC Pre-fuse: 25 A Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, “functionally tested; item originates from the dismantling of equipment from an automotive supplier” Quantity: > 100 units Siemens Sinumerik 6FC5303-1AF30-0AA0 MPP 1500D Push Button Panel Control Panel Guodpfx Ajzi Dr Homtsh MPP 1500D Connection: Industrial Ethernet AND PROFINET with connection for HT8