Used Profile Milling Machine for sale (86,611)

Condition: good (used), Year of construction: 1986, feed length X-axis: 710 mm, feed length Y-axis: 600 mm, feed length Z-axis: 455 mm, x-travel: 710 mm y-travel: 600 mm z-travel: 455 mm Control: Dialog 4 Speed: 6300 rpm Nodox I Hmajpfx Affodf Tool holder: SK40 Quill stroke: 80 mm Table size: 550 x 1000 mm Table load: 0.6 t Total power requirement: kW Machine weight approx.: 4 t

Condition: used, Year of construction: 2001, x-travel 400 mm y-travel 320 mm z-travel 450 mm Control Haidenhain TNC 124 drive of main spindle 3 kW Ndsdpfx Afexndahsfsf number of spindle speeds 63-3150 u/min tool taper SK 40 stroke of quill vertical 60 mm feed speeds 5-2000 mm/min rapid traverse 2 m/min work table: 800x320 mm coolant 20 l/min total power requirement 5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. 2,2x2,4x1,6 m

Condition: used, Year of construction: 1997, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 76, workpiece weight (max.): 20 kg, power: 70 kW (95.17 HP), total length: 6,000 mm, total width: 3,500 mm, total height: 2,300 mm, input voltage: 400 V, air pressure: 6 bar, suction capacity: 12,000 m³/h, 1) Camam machine 1997y - 2x inside x 2x outside moulder (11kW motor) - 2x inside x 2x outside paper sanding (5kW motor) total power 74 kW 2) Camam machine 2002y - 2x inside x 2x outside moulder (11kW motor) - 1x inside x 1x outside paper sanding (5kW motor) total power 60kW Ndedpfx Afov Unhgjfof Machine suitable for bended elements (ex backrests), narrow longitudinal elements (legs), pieces height 120 mm, depth 65mm, rotation speed 8m/min

Condition: used, x-travel 500 mm y-travel 200 mm z-travel 400 mm table surface area 700 x 300 mm tool taper SK 40 - S20 feed 8 - 400 mm/ min rapid traverse in X und Z 1200 mm / min Ndsdpfsx Hay Dsx Affof turning speeds 40 - 2000 U/min total power requirement 2,2 kW weight of the machine ca. 1400 kg dimensions of the machine ca. 1500 x 1200 x 1600 mm Includes 2-axis digital display Heidenhain

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Nsdpfx Afev R E Rdsfjdf Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, USED KIHEUNG POINT U6 WITH HEIDENHAIN TNC POINT TO POINT CONTROL SERIAL NUMBER 3190597 YEAR 1999 MACHINE DELIVERY / AVAILABILITY - Ex Stock - Subject to Prior Sale. MACHINE CONSTRUCTION & FEATURES Nsdpovrzv Ejfx Affodf  TRAVELLING TABLE CNC MILLING MACHINE WITH UNIVERSAL MANUAL INDEXING HEAD  HEAVY-DUTY CAST-IRON BED CONSTRUCTION FOR HIGH ACCURACY & RIGIDITY.  HEAVY DUTY CAST IRON CONTRUCTION WITH SOLID SLIDEWAYS  LINEAR SCALES. ADDITIONAL INCLUDED ACCESSORIES, OPTIONS & TOOLHOLDERS  COOLANT EQUIPMENT  MACHINE TABLE GUARDING INCLUDED. FIXED TABLE Working Surface 2,200 x 550 MM Tee Slot Configuration 5 T-SLOTS X 20H12 TRAVELS Longitudinal Column Travel (X-Axis) 1,600 MM Vertical Head Travel (Y-Axis) 900 MM Cross Travel (Z-Axis) 700 MM SPINDLE HEAD Spindle Nose Taper ISO 50 Spindle Speeds - 2 Ranges 40-1600 RPM Spindle Motor Power 11.0 KW SLIDE FEEDS Cutting Feedrate 2000 (LONG AND CROSS), 1000 (VERT) MM / MIN Rapid Traverse (X, Y-Axis) 5 M/MIN Rapid Traverse (Z-Axis) 2.5 M/MIN Rapid Traverse (Z-Axis) 15 M/MIN POWER SUPPLY Voltage 415V / 50HZ / 3PH MACHINE Floor Space 4,750 x 2,720 MM Height 3,050 MM Weight 8,000 KGS

Condition: good (used), Year of construction: 1991, feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, X-travel: 560 mm Y-travel: 500 mm Z-travel: 400 mm Control: TNC 360 Spindle speed: 40-4,000 rpm Total power requirement: 7.5 kW Machine weight approx.: 2.6 t Space requirement approx.: 2.6 x 1.8 x 2.2 m Ndedpfx Aex I En Ajffef

Condition: used, Year of construction: 2001, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW Ndjdpsx E Ttbsfx Affef • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop • Light barrier system controlled by machine controller

Condition: used, functionality: fully functional, spindle diameter: 30 mm, table width: 1,070 mm, type of input current: three-phase, spindle speed (min.): 3,000 rpm, spindle speed (max.): 9,000 rpm, – very good condition – manufactured in Poland – DTR (Technical Documentation) – interchangeable spindle TECHNICAL PARAMETERS: – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left – table dimensions: 1020 x 1000 mm – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm Nsdpfx Afjw Ip Dmofsdf – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg

Condition: excellent (used), Year of construction: 2019, X-axis 5,000 mm Y-axis 3,000 mm Ndjdpfex E S E Nsx Affjf Z-axis 1,500 mm Table size 5,000 x 2,500 mm Tool holder HSK 63 Tool changer 60 positions Control HEIDENHAIN TNC 640 Including through-spindle coolant (IKZ) 40 bar Including simultaneous fork head Including complete documentation Including IKZ 40 bar

Condition: new, The Servomill® UWF 900, a top-tier model in the Conventional Vertical Milling Machines category, exemplifies the advanced engineering of KNUTH. This versatile machine integrates servo-conventional feed technology with a swiveling cutter head, offering remarkable functionality for various milling applications, including tool making and manufacturing. With an expansive work area of 1,235 x 460 mm and a travel range of 900 mm on the X-axis, the UWF 900 combines user-friendly operation with precise performance. The robust design features preloaded ball screws on all axes and high-quality servo motors that facilitate infinitely variable feed speeds, significantly enhancing productivity. Users can effortlessly execute complex tasks with the aid of electronic hand-wheels and joystick controls. Additionally, the machine is equipped with a range of standard accessories, including an automatic lubrication system and LED work lights. Offering high reliability and a long service life, the Servomill UWF 900 is a powerful choice for modern machining requirements. For a detailed quote or to obtain this exceptional milling machine, please request a quote today, and experience the precision and robustness of the UWF series in your own operations. Njdpfx Afouy Id Asfsdf

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 56600, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,600 mm, spindle speed (max.): 3,000 rpm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, table width: 1,000 mm, table length: 4,000 mm, table load: 10,000 kg, Table dimensions: 4000x1000 mm Number of T-slots: 7 T-slot dimensions: 22 mm Max table load: 10,000 kg X-axis travel: 4000 mm Y-axis travel: 1200 mm Z-axis travel: 1600 mm Head type: Automatic, 360,000 positions 0.001° (2 bodies) Speed range: 35-3000 rpm Main motor power: 32 kW Working feed: 15,000 mm/min Rapid traverse (X,Y,Z): 30,000 mm/min Year: 2011 Equipped with: CNC control: HEIDENHAIN iTNC 530 Electronic handwheel: HR 420 Tool changer: 30 tools Workpiece probe: HEXAGON Coolant: Internal Chip conveyor: Yes Paper filter tank: Yes Nedpjx Iu Ryofx Affsdf

Condition: used, Grinding wheel diameter max.: 225 mm grinding wheel diameter max.: 225 mm Largest tool diameter: 300 mm Smallest tool diameter: 80 mm Tool width max.: 230 mm tool width max.: 230 mm Ndjdslf H Tgopfx Affof Weinig Rondamat 929 knife grinding machine for producing profile knives. Production from a straight blank or regrinding of used knives using a template. * Incl. new coolant pump.

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa Ndodpfx Afjx E Tmbsfof

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Ndedpfjw T S Sqjx Affef Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: used, Year of construction: 2007, machine/vehicle number: 36585, feed length X-axis: 800 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, table load: 1,000 kg, overall weight: 15,500 kg, input current: 55 A, input frequency: 50 Hz, 2007 Alzmetall CNC milling machine (with Kuka robot) Ndsdpfxewpu D Ao Affef The machine has been dismantled and is ready for loading. The card has been removed!

Condition: new, The Servomill® UWF 1400 is a premier model in the category of Conventional Vertical Milling Machines, showcasing state-of-the-art servo-conventional feed technology. This versatile milling machine features a large work area, driven by powerful spindle motors capable of operating with exceptional precision. Its robust design incorporates a swiveling cutter head that can rotate on two axes, allowing for a wide range of machining tasks without the need for complex programming. Notable features include preloaded ball screws on all axes, enabling jolt-free positioning and minimal wear—ensuring a long service life. Integrated electronic controls enhance user experience, providing intuitive operation through electronic hand-wheels and joystick technology. The Servomill® UWF 1400 is suitable for various applications, including tool making and manufacturing, with an extensive list of standard equipment, such as a powerful coolant system, LED work lights, and automatic lubrication. Experience the benefits of modern CNC technology in a conventional setting with KNUTH's Servomill® UWF 1400. To elevate your machining capabilities, request a quote today and explore our range of Conventional Vertical Milling Machines. Nsdeuy Ia Depfx Affjdf

Year of construction: 2004, condition: good (used), Build Year: 2004 in well-kept swiss condition Located: Switzerland under Power, available in Februar 2022 Control: SIEMENS 840 D POWER Line incl. Turning and Millingsoftware Traverses: Longitudinal (X): 2.700 mm Axis (Z): 1.800 mm Axis (Y): 1.500 mm Turning Table: ø 2.500 mm W- Travel Axis : 1.500mm Max. Speed: 50 rpm Table max. load: 25 Tons Automatic indexing Orthogonal Head: 1° x 1° Spindel Speed: 3.000 U/min Spindel Power: 30 kw Nodpfx Aeiyp Syjffsdf Tool Taper: SK 50 BIG PLUS & Capto C8 on Orthogonal Head Tool Changer ATC 30 – Pick Up with 8 Magazine for Long Tools CE Konformität / complete Machine Documentary The machine is in good and well serviced Condition, full functional and can be visited under Power in Switzerland.

Condition: used, chain width: 17 mm engine: 2,2 kW Rotatable: + - 45 ° Table swivel: + - 45 ° Further data: See PDF Lock case milling machine, door lock milling machine or chain milling machine / chain mortiser Framar type MC 60 for simultaneous milling of lock cases and drilling of door holes on doors and windows as well as many other possible uses. Nodpfx Ajtunbueffjdf Chain width: 17 mm Motor: 2.2 kW

Condition: like new (used), Dimensions: mm 1.000 x 1.200 x h2.500 Ndodpfoivz Edox Affjf

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 Ndjdpfx Afsw Uc Npofof - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Year of construction: 2020, condition: like new (used), - Second-hand machine, as good as new - 3/5-axis CNC portal milling machine with single table and fixed crossbeam - Control: Heidenhain TNC 640 HSCI Travels for machining: Ndjdpfoiux Dzjx Affjf - X- machine table 6.000 mm - Y- milling unit 4.400 mm - Z- ram 1.500 mm - C-axis in ram [RAM], endless rotation n x 360°. Machine table: - Length 5,500 mm - Width 3.000 mm - Table load 40,000 kg (max.) - Table surface over floor 200 mm - 1 straightening T-slot according to DIN 650 28H8 mm - T-slots according to DIN 650 28H12 mm - Center distance of the T-slots 250 mmn - Position of the clamping T-slots crosswise Portal passage: - Distance between clamping surface and max. 2,300 mm Bottom edge of slide interface min. 800 mm - Machine passage in height, approx. 2,200 mm - Machine passage in width, approx. 3,500 mm Travel speeds: - X-axis max. 30,000 mm/min. - Y-axis max. 30.000 mm/min. - Z-axis max. 15.000 mm/min. - A-axis max. 12 rpm - C-axis max. 12 rpm - Acceleration linear axes max. 1,5 m/sec2 Dimensions: - Total length approx. 15,200 mm - Total width approx. 9,950 mm - Total height, floor level to RAM upper edge approx. 6,950 mm

Condition: used, A rigid table milling machine or rigid milling machine Bäuerle type SFM for profiling and milling wood, equipped with a table extension and a feed device. Nodpfx Aev Hf Uueffodf Spindle ø: 30 clamping length: about 120 mm speeds (milling machine): 3,000/5,000/6,000/10,000 rpm Direction of rotation: Left and Right

Condition: used, * Z4 Nsdpfx Afelf I Hvsfedf * 185x80x60mm.

Condition: used, Lot of various profile cutters from Leitz in very good used or like-new condition. diameter: up to 148 mm drilling: 30 mm width: up to 80 mm Ndedoxrdl Espfx Affef Labelling: BG test