Used Profilator for sale (5,215)

Condition: good (used), Technical data: Njdeytyf Sjpfx Ahvjcp 2 hydraulically adjustable rollers 3 driven rollers Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: new, Shaft diameter 40 mm 138 mm Upper shaft diameters 138 mm engine output 1,1 / 380 kW / V work speed 6 m/min weight of the machine ca. 230 kg required space 750 x 600 x 1400 mm The Gerd Wolff PK 40 is a pipe bending machine which is produced for our GERDWOLLF Maschinenfabrik" by a renowned manufacturer from Türkiye. Standard Accessories and technical details - Sheet metal frame - 2 bottom rolls are driven - Direct drive power - Upper roller is idle (free rotation) - Hardened rollers - Hardened shafts made of special steel material - Standard rollers - Adjustable guide rollers - Horizontal and vertical working position Optional equipment - Tube bending rollers - Profile bending rollers - Angle bending rollers - Digital readout Ncsdpfx Aheyn R Ugsvep - Optional lateral angle guides

Condition: used, Year of construction: 1976, Profile bending machine IRLE - B 160 HH Njdpfx Aoytn E Tshvscp Technical data on photo

Condition: ready for operation (used), Year of construction: 1995, Three similar profile milling machines CMS are available. Two of the units were used as spare parts carriers, therefore only one functional machine with 2 spare parts donors is referred to here. Spindle power: 7.5kW, tool holder: BT30, speed: 15000rpm, machining dimensions X/Y/Z: 620mm/1200mm/193mm, machining dimensions W/V: 2440mm/629mm, feed rate: 12m/min, positioning accuracy: 0.001mm, control: IBH/ATEC 6000HS, years of manufacture: 1992/1995/1996. Documentation available. An on site inspection is possible. Nsdpfxsytgnms Ahvocp

Condition: new, functionality: fully functional, Year of construction: 2026, overall weight: 450 kg, input voltage: 400 V, total length: 900 mm, total width: 850 mm, total height: 1,700 mm, Technical Specifications Ncodpfxoytffwe Ahvsp Material: round / rectangular tube: 70 × 2 mm / 60 × 60 × 3 mm Material: round / square bar: 35 mm / 35 × 35 mm (diameter) Roller diameter: 50 mm Motor power: 2.2 kW Power supply: 3-phase, 400 V Dimensions (L × W × H): 900 × 850 × 1700 mm Weight: 450 kg Delivery Terms The machine is brand new 12-month warranty Warranty service Post-warranty service CE Declaration of Conformity Technical documentation (DTR) in English Delivery to the customer is possible. The delivery cost is determined individually according to the carrier’s quotation. If you are interested in other machines, we encourage you to visit our website.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Sahindler - Scantool profile bending machine Model PV 60 NC Year 2019 - New / Demo Roll diameter : 215 mm. Capacity flat iron : 120 x 25 mm. Capacity flat iron on edge : 80 x 20 mm. Capacity angle iron: 70 x 7 mm. NC control 1 set profile bending rolls Hydraulic top roll movement Bending support Footpedal Nedpfxsytb U Us Ahvocp

Year of construction: 1986, condition: excellent (used), I sell Profile Grinding Machine Reckmann LM 161. Grinder in very good condition, little used. Nodjuyg Rnopfx Ahvjcp

Condition: new, Year of construction: 2021, functionality: fully functional, overall weight: 600 kg, workpiece diameter (max.): 40 mm, Round Log Profiling Machine | Log Milling Machine | Log Shaper For sale is a round log profiling machine designed for processing tree trunks. This machine – also known as a round log milling machine or log shaper – enables the production of round log components for log home construction, landscaping, and creative woodworking projects. Description A round log profiling machine for machining tree trunks, ideal for log home construction and demanding timber structures, is offered for sale. The machine performs precise processing of round logs in several coordinated work steps, resulting in perfectly fitting components for natural log houses, log cabins, or structural timber projects. Processing Steps The machine performs several operations in a single process: - Debarking Removal of bark and preparation of the log. - Shaping Uniform rounding and contouring of the log. - Contour and Longitudinal Milling Milling of profiles and contours along the entire length. - Milling of Installation Grooves Thermal barrier / moon groove for precision log house assembly. - Cutting Notching for sockets or joints at 90-degree angles. - Finishing A complete log is processed in approximately 30–40 minutes. Applications - Log house construction - Natural log buildings - Round log structures - Timber constructions Advantages - Multiple work steps in a single machine - Precise processing along the entire log length - Ideal for small to medium production volumes - Electric drive systems Target Users - Log home builders - Timber framers - Timber construction companies - Round log specialists Accessories - Spare cutterhead - Knife set - Knife sharpening machine - Spare parts kit Inspection Inspection possible by appointment. Further information and technical details available on request. The sales price refers to the complete machine including accessories! Ncjdpfx Aeyr E Ezjhvjp Keywords: Round log milling machine, log shaper, round log machine, round log profiling machine, log milling machine, timber log milling machine, round log profiler, round log processing machine, log house machine, round log processing unit, post milling machine.

Condition: good (used), Year of construction: 2009, Elumatec SBZ 140 Extended Length Version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light curtains Automatic clamp detection Njdpfx Asx E Ahzehvjcp Central lubrication Coolant spray system Chip trolley Conditioning unit Max spindle speed: 24,000 rpm Tool holder: HSK-63F, 8-position tool changer Max milling diameter: 80 mm Max saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilt/rotation axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis traverse speed: X-axis up to approx. 65 m/min, Y- and Z-axis up to approx. 60 m/min (varies with configuration) Control: 4-axis CNC system, PC control, color display, USB & network connectivity. Software: eluCam. Automatic material clamps; automatic positioning via index pins Pendulum/shuttle operation (two work zones), improving production throughput time. In addition to milling and drilling, also tapping, sawing, and profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled to the best of our knowledge, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for business customers).

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 081001, WOODWORKING TENONING MACHINE WITH AUTOMATIC FEED, 4 OPERATIONS Brand: VERTONGEN Model: PENTHO C 4 B Serial No.: 081001 Year: 2001 (Photos taken prior to overhaul, functional testing & cleaning) Automatic cycle woodworking tenoner with manual operator group selection and fine adjustment. MACHINING CAPACITIES: - Max. wood section (thickness x width): 135x230 mm - Max. cutting height: 135 mm MACHINE CONFIGURATION: Table: - Cast iron table 400x600 mm, tiltable up to 60°, positioning by clamping - 2 pneumatic hold-down clamps for wood clamping - Extendable metric stop ruler with double stop, anti-splinter profile, and end support 1) Sawing: cross-cutting - 2.2 kW (3 HP), blade speed 3,000 rpm - Saw blade Ø400 mm, bore Ø30 mm - Cutting depth adjustment 140 mm 2) Top and bottom planing cutterheads with carbide knives: - Cutterhead with W3 carbide knives, Ø160xL140 mm - Top head 3 kW / bottom head 2.2 kW, rotation speed 4,500 rpm - Independent manual fine adjustment for withdrawal or positioning: Top cutterhead axial movement: -40/+35 mm, vertical travel 0-135 mm Bottom cutterhead axial movement: -40/+10 mm, vertical travel 0-80 mm 3) Spindle moulder: - Power 5.5 kW, speed 4,000 rpm Ncjdpfxewxdb Ne Ahvsp - Spindle Ø50 mm, useful length 160 mm - Vertical travel 150 mm, horizontal travel 130 mm - Max. tool diameter (tenoning discs) Ø350 mm 4) Shoulder head (cutterhead) for left and right operation: - Power 2.2 kW (3 HP), speed 4,500 rpm - W3 carbide knife cutterhead Ø160xL140 mm - Manual fine adjustment for withdrawal, positioning, and travel OTHER TECHNICAL FEATURES: - Main power supply: 3-phase + N + PE, 400V, 50Hz - Installed power: 15.1 kW (20.5 HP), rated IN 30A - Counters for manual operational adjustments - Pneumatic supply: 6 bar working pressure (for hold-downs) - Dust extraction ports and recommended airflows: 360 (saw) + 2500 (cutterheads) + 1250 (spindle moulder) + 2500 (shoulder head) m³/h Air velocity 25-30 m/s Manifold supplied, 1 connection, flanged edge 280 mm. If shoulder operation is used, provide for branching: 160F/150F/150F flex hoses - CE marking, automatic retraction of guards, braked motors, padlockable main isolator, emergency stop buttons Transport dimensions (LxWxH): 3.70 x 1.70 x h.2 m Weight: 1650 kg

Condition: used, Number of spindles 3 St. Number of tools 8 St. Spindle diameter 50 mm Dimensions (L/W/H) 4250x1850x2300 mm ! MACHINE FUNCTIONALLY CHECKED AND READY FOR DEMONSTRATION ! !!! Technical description in RUSSIAN, more machine pictures as well as machinevideos - if available - at the end of this description as attached files !!! # 6988 Weinig Univar 6 CNC ..... ..... Technical details summary (please ask for possibly more included equpment) ..... ..... 1st profiling spindle: ..... ..... > spindle rotation direction: clockwise and reverse for rip-off free outside profiling of sashes > position: vertical right > number of tools: 1 pcs. > length of spindle: 120 mm > number of revolutions: 6000 rpm > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 2nd profiling spindle: ..... ..... > position: vertical right > number of tools: variabel, CNC > length of spindle: 320 mm > spindle stroke vertical: variabel, CNC > number of revolutions: 6000 rpm Ncedpfeymf Eksx Ahvjp > spindle diameter: 50 mm > tool diameter max.: 232 mm > engine: 11 kW 3rd profiling spindle: ..... ..... > position: vertical right > length of spindle: 160 mm > number of revolutions: 5850 rpm > spindle diameter: 40 mm > tool diameter max.: 210 mm > engine: 3 kW More features: ..... ..... > possible to work online: > monitor control: > Equipment for profiling small sashes: min. 500 mm > Control: PC-Nexus If the technical characteristics of this machines donnot fit with your requirements, please get in contact with us. Our longtime experienced team is looking forward to support you in technical adaptions or in finding a suitable machine for you! Technical details according to manufacturer - without guarantee!

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. Ncsdoymampepfx Ahvep The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.

Condition: new, Year of construction: 2026, shaft diameter: 80 mm, - Ring bending machine - Shaft diameter 80 mm - Lower two rollers are moved hydraulically - Three rollers driven - Hydraulically adjustable guide rollers - 2 digital displays Ncedpfxog Sr I Uo Ahvsp - Brake motor - Can be used horizontally/vertically - Mobile control panel - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, rotational speed (max.): 50 rpm, - Ring bending machine Nedpfjlp Ryhjx Ahvjcp – Shaft diameter 50 mm – The top roller is moved hydraulically – Digital display – Can be used horizontally/vertically – Foot control – Emergency stop – Documentation – 400 V

Condition: new, Year of construction: 2025, shaft diameter: 30 mm, - Shaft diameter: 30 mm - Rotates both clockwise and counterclockwise - Usable horizontally and vertically - Foot operation Ncjdpfxjxgb A Do Ahvep - Emergency stop - Documentation - 400 V

Condition: good (used), Year of construction: 1984, CNC Optical Profile Grinding Machine Nedpfxsp R Rm Is Ahvscp Wasino GLS-130AS 1984

Condition: good (used), Year of construction: 1996, Hema Profile Grinding Machine Type PSM 300, year 96, with base frame Njdpfx Aeyl Ilwehvjcp HEMA PSM 300 Universal Profile Grinder - Automatic belt tensioning - Tool-free, fast belt change within seconds - Standard internal grinding with same belt length - Quick-change system for grinding bars - Cast iron table, 450x450 mm, tiltable up to 45°, zero stop and scale - Motor 1.1 kW, 2800 rpm - Very quiet operation - Maximum grinding height 300 mm, grinding bar height inside 200 mm, outside 250 mm - Switch with undervoltage release - Extraction port 60 mm - Connection for industrial vacuum cleaner

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox Njdpfx Ahsd E A I Isvjcp - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Mechanical pull-down NC machine vice FRIBOSA type size B Precision machine vice, grinding vice, clamp Jaw width 100 mm Jaw height 34 mm Clamping width 0 to 130 mm guideway height 40 mm guideway length 270 mm - mechanical machine vice - Clamping range via trapezoidal spindle - Stable base body ground on all sides - Can be clamped horizontally, vertically or laterally Ncsdpfsilx Ufsx Ahvsp Dimension L x W x H 310 x 100 x 77 mm weight: 10 kg good condition

Condition: used, 5-fold combined profile steel shears PEDDINGHAUS type 210 AD/13 Nsdoi Duh Iopfx Ahvjcp Machine. No. 529A059 Year of manufacture approx. 1970 Punching machine: Punching force 60 ton. Punch stroke 25.5 mm Punching capacity Ø 25 mm in 16 mm sheet metal Ø 20 mm in 19 mm sheet metal throat depth 365 mm Bar steel shears: Cutting capacity Round 42 mm Square 38 x 38 mm Flat steel shears: Cutting capacity with shearing angle 5° 150 x 13 mm or 200 x 10 mm Blade length 245 mm Profile steel shears: Shearing capacity angle steel at 90° 110 x 10 mm Shearing capacity angle steel at 45° 90 x 9 mm T-steel 110 x 10 mm Notching device: Rectangular notcher up to 12 mm sheet metal Punch dimensions 85 x 50 mm Motor power 3 kW Mains connection 380 Volt, 50 Hz. - Center punch detection device via hand lever and centering device - Mechanical stroke release via hand lever - Flat steel shears equipped with 2° blade - Mechanical hold-down device on the profile steel shears, bar steel shears and flat steel shears Space requirement L x W x H 1500 x 800 x 1900 mm Weight 2000 kg good condition

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Ncodpfxeh A S Hte Ahvop Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Ncodpfxohbal Dj Ahvop Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: new, Ring-profile bending machine Akyapak APK 81 I-steel - upright 100 x 20 (d 2100) mm raw diameter max. 100 x 3 (d 3000) mm angle steel 80x80x8 (d 2000) mm square steel 50 x 25 x 2 (d 600) mm I - steel - flat 120 x 30 (d 600) max.140b mm solid material - diameter 60,0 (d 1000) mm tool holder 80,0 mm Speed 4,2 m/min. Weight 1.600 kg Dimension L-W-H 1240 x 1375 x 1540 mm Equipment: hydr. roller drive planetary gear feed of the 2 lower rollers for extra small bending radii hardened tool holder (42CrMo4) standard roll set, hardened mobile control panel 3 driven rolls digital display machine can be used horizontally and vertically CE-sign / declaration of conformity Ncedod R Iqujpfx Ahvsp Operating instructions in German

Condition: new, Ostas Profile Ring Bending Machine OPK 125 Technical Specifications: • Tool holder, shaft: 120 mm • Tool: 390 mm • Working speed: 2-7.5 m/min • Motor: 15 kW • Dimensions (L-W-H): 2000 x 1700 x 1950 mm • Weight: 4850 kg • 3 rollers are driven separately by a hydraulic motor and planetary gearbox • Hardened standard rolls • Hardened and ground tool holder, shaft • Mobile control panel • Horizontal and vertical working position • Hydraulic side supports • Digital displays (2 pcs.) • In accordance with CE standard Ncsdpsxrd Rnsfx Ahvsp

Condition: new, Akyapak Akbend ring APK 35 profile bending machine Description •. base • horizontal and vertical working • Foot switch • Standard rolls (shared) • 2 driven rollers • CE mark / conformity declaration • User manual in German Technical details • I - steel - flat: 120 x 15 (d 750) mm • I steel upright: 60 x 10 (800 d) mm • Angle steel: 50 x 5 (1200 d) mm • Round material: 35.0 (800 d) mm • Max size: 70 x 2 (1200 d) mm • Square material: 50 x 40 x 3 mm • Bending speed: 4.3 m / min • Diameter of the roller - top: 155 mm • Bore: 50.0 mm Nsdpfx Ahjd Er S Ievocp • Total power: 1,5 kW • Weight: 320 kg • Dimensions L W H: 730 x 830 x 1350 mm