Used Infrared for sale (235)

Condition: good (used), Inductive sensor, electronic sensor, proximity switch, infrared sensor, IR sensor, web edge sensor, photoelectric sensor Hnodpfexv R Iuox Ah Nog -Manufacturer: Fife, infrared sensor -Type: SE-42R M280746 -Number: 11 sensors available -Price: per piece -Dimensions: 140/100/H25 mm -Weight: 0.1 kg/pc.

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required Hsdpfx Asqvlw Ieh Nong very economical - fuel consumption approx. 2 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: used, This listing is for the Unity Scientific Spectra Star 2600XT bench‑top near‑infrared (NIR) analyzer The unit is in full working condition and is ready for immediate use The SpectraStar 2600XT‑is a high-performance, bench‑top near‑infrared (NIR) analyzer developed by Unity Scientific, designed for rapid, versatile compositional analysis across a wide variety of sample types, including solids, slurries, and liquids. Overview & Key Features Design & Functionality Dual Convection Technology: Offers adjustable fan speed from 0 % (natural convection) to 100 %, enabling tailored air circulation depending on the sample type or protocol Temperature Range: Operates from 5 °C above ambient up to 105 °C, making it suitable even for drying tasks Hsdexhd I Sopfx Ah Nsng Temperature Uniformity & Stability: With fan off: ±0.6 °C spatial uniformity With fan at full speed: ±0.2 °C to ±0.4 °C uniformity (at 37 °C) Temporal stability: ±0.1 °C (at 37 °C) Capacity & Build Interior Volume: 178 L (about 6.3 cubic feet) Shelving: Comes with 2 stainless-steel shelves (each supporting up to ~25 kg) and can accommodate up to 19 shelves for flexible arrangement Construction: Corrosion-resistant stainless steel interior (AISI 304) with easy-to-clean rounded corners Controls & Usability Controller: Microprocessor-based with a clear vacuum fluorescent display for easy setting of temperature, timers, and monitoring Timer Functionality: Programmable daily, weekly, or real-time ON/OFF cycles for scheduling experiments Extras: Internal power socket (120 V models) for operating devices like shakers or stirrers inside the chamber Internal glass viewing door and optional internal lighting for observing samples without opening the chamber RS‑232 interface for data logging and connectivity Stackable design without tools—efficient laboratory space use Safety & Maintenance Alarms: Automatic over- and under-temperature alert system protects sample integrity Security Model (IMH180‑S): Adds a lockable outer door and audible alarms for door‑open conditions Includes a certified 140 °C decontamination cycle (about six hours) to sterilize the chamber without needing an autoclave—ideal for high‑sterility environments Dimensions & Electrical Specs Feature Specification Exterior (W × D × H) 64 × 74 × 92 cm (25.2 × 29.1 × 36.2 in) Interior (W × D × H) ~46 × 54 × 70 cm (18.3 × 21.4 × 27.9 in) Weight ~70 kg (154 lb) Electrical (120 V) 1,020–1,390 W; 8.5 A at 60 Hz Materials Stainless steel (interior), durable housing Summary The Thermo Scientific Heratherm IMH180 is a high-performance, reliable incubator tailored for demanding laboratory tasks: Precision: Excellent temperature control and uniformity. Flexibility: Adjustable airflow, generous interior volume, and timer options. Convenience: Viewing window, internal socket, and connectivity via RS‑232. Cleanability & Space Efficiency: Stainless steel interior and stackable design. Advanced Safety (Security Model): Door alarms, lockable access, and high-temperature decontamination. Perfect for microbiology, cell culture, pharmaceutical testing, and drying applications where sample integrity and process control are critical.

Year of construction: 2011, condition: used, functionality: fully functional, machine/vehicle number: Econored II, EconoRed II-54 drying tunnel - Vastex - Year 2011 - Good condition. Equipped with 2 x 7200-watt infrared panels. Dryer for curing plastisol ink, water-based screen printing ink, and more. Numerous settings: - Adjustable belt speed with digital display - Adjustable temperature on digital display - Infrared height adjustable from 5 to 17 cm using a dial - Teflon belt with exclusive patented drive system Technical specifications Power: 14,400 watts Total length: 221 cm Hodpjwbd A Eofx Ah Nong Belt width: 137 cm

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Hodpfof I Ew Hox Ah Njng Ambient temperature: 15°C ~ 30°C Humidity: 70% or less External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), For sale: a hexagon infrared detail probe in very good condition. Purchased a year ago from a machinery auction site. I haven't installed or used it yet. I don't think I'll need it again, so I'm selling it. After inserting the batteries, the blue LED lights up for a few seconds, as described in the manual. It appears to be very lightly used. It's not caked with oil, as can sometimes happen with long-term use. It comes with an HSK63 holder, which can be exchanged for another holder system.The kit includes everything pictured, along with an additional stylus and service tools. Hnsdpjxpumzjfx Ah Neg

Condition: used, Die Schmedt PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Hodpfsxp H S Aex Ah Neng The Schmedt PRÄDRY is an extendable dryer for perfect-bound book blocks. Infrarot-Trockengerät / Infrared drying device Schmedt PräDry HHS 12 Die PRÄDRY ist ein verlängerbarer Trockner für klebegebundene Buchblocks.  Ein dreistufiger Infrarotstrahler (650, 850 und 1.500 Watt) sorgt für eine  schonende und schnelle Trocknung.  Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2025, functionality: fully functional, Patented electric heating solution for efficient and cozy heating. Heat output 2.8 kW (infrared 1.6 kW and halogen 1.2 kW) for approx. 10-35 sqm area at approx. 2.5 m room height Connected load 11.8 A Dimensions 54x29x80 cm Hjdpsqvmcpsfx Ah Nsng Weight 15 kg

Condition: used, This listing is for the Stuart CR302 Infrared Hotplate stirrer The unit is in full working condition and is ready for immediate use Overview & Key Features Infrared (IR) Heating: Utilizes a 900 W infrared heater—this allows it to boil 1 litre of water over 30% faster than standard 1200 W ceramic hotplates. Powerful Magnetic Stirring: Equipped with rare-earth magnets, it can stir up to 15 litres of liquid. Stirring speed is adjustable, ranging from 100 to 1500 rpm, with feedback control to maintain steady rates. Temperature Capability: The hotplate can reach a maximum temperature of 400 °C. Size & Portability: Hotplate surface: 30 × 30 cm Hnjdexhfq Uspfx Ah Nog Overall dimensions: approximately 32 × 37 × 11 cm (W × D × H) Weight: about 4 kg Power Supply: Designed for use with 240 V, compatible with standard UK lab mains at 50/60 

Condition: new, Year of construction: 2023, Infrared Dryer IR-TEX MINI, 700mm Belt width: 700mm, spot width: 500mm, cover length: 1m, total length: 1.8m, heating: 4 kW, connection: 400V, 50Hz Infrared drying channel for textiles with ceramic spots, Teflon-coated belt, electronic conveyor control, heating variable via Digi-Thermo, suitable for a small number of items, compact construction, insulated cover. Hodpfxjh Tyw Ae Ah Neng

Condition: excellent (used), Here we offer Polychromix Phazir NIR spectrometer. Portable Near Infrared Analyzer Model: 1624 Specifications Spectral range: 1600-2400 nm. Pixel pitch 8nm Hnedjn Arm Tepfx Ah Nog Optical resolution 11nm Scattered light

Condition: like new (used), Year of construction: 2018, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 3200 0088, overall weight: 2,000 kg, total length: 7,300 mm, total width: 1,100 mm, total height: 2,000 mm, input voltage: 400 V, input current: 125 A, type of input current: three-phase, input frequency: 50 Hz, cooling capacity: 30 kW (40.79 HP), operating speed: 83 mm/s, Manufacturer IBT.InfraBioTech GmbH Art.-No. 3200 0088 Technical Data Condition: As new; little used from test series Functionality: Fully functional Hedpewnm Ukefx Ah Nong Year of manufacture: 2018 Connected load: 58 kW Cooling capacity, water connection on-site: 30 kW Conveyor belt length: 7,000 mm Conveyor belt width: 310 mm Infeed height: 55 mm Infeed width: 308 mm TECHNICAL DETAILS Application: Conveyor oven for curing in film bonding technology Component temperature: max. 100°C Stainless steel housing (LxWxH): 7,300 x 1,100 x 1,680 mm Overall height without control cabinet: 2,000 mm Control cabinet (WxDxH): 1,200 x 600 x 2,100 mm Base frame made of stainless steel profile tube, height adjustable: ± 30 mm Conveying system Vacuum conveyor belt made of silicone, belt 310 mm wide Transport speed: max. 5 m/min Conveyor belt height: 950 mm ± 30 mm Belt infeed/outfeed openings (WxH): 308 x 35 mm Free area infeed: approx. 750 mm Free area outfeed: approx. 750 mm Conveyor belt operation: Continuous operation, adjustable up to max. 5 m/min, tracking regulation with light barrier safety system at infeed and outfeed. Loading and unloading are performed manually. Intended use The curing oven is a belt system for continuous operation with a feed speed of max. 5 m/min. Open areas at the infeed and outfeed sections are provided for loading and unloading components. The enclosed heating section houses 6 IR modules (height adjustable). The maximum component temperature is 100°C and serves to heat solvent-free adhesive between composite film layers. The return side of the belt, the rear sides of the IR modules, and the space above the heating modules are water-cooled. Components are held onto the conveyor belt by vacuum. The control cabinet is located separately from the machine outside the cleanroom. The system operates in a cleanroom according to EN ISO 14644 Class 8 and is loaded and unloaded by the operator. The equipment is exclusively for the warming of film composites. Features - 6 adjustable infrared heating modules, each with 6 infrared emitters - 6 pyrometers for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel base frame - Vacuum conveyor belt - Cooling water distribution in the base frame (G1") - Water cooling for the belt return section and rear sides of IR modules - Mechanically lockable service doors - Operator panel mounted at the infeed on the left side - Control cabinet cooling unit, water connection on-site History This oven was intended for use in a cleanroom environment and was only used briefly for a test series. The oven was used for curing solvent-free adhesives between composite film layers.

Condition: new, functionality: fully functional, Year of construction: 2025, Pothole Repair Complex MIRA-3 Pothole Repair Complex MIRA-3 by TICAB TM is a unique road repair system developed by TICAB engineers for optimization of road patching works. MIRA-3 complex includes infrared asphalt heater, asphalt recycler and bitumen emulsion sprayer. How to use MIRA-3 Complex: - Heating of the repair place. - Add a hot asphalt from the asphalt recycler. - Spraying the bitumen emulsion. Hnedpfx Ajt Itzzeh Njg MIRA-3 includes: - Infrared Asphalt Heater MIRA-3. - Bitumen Emulsion Sprayer BS-100. - Asphalt Recycler RA-500.

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 2.5 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel low noise - only 48 dB Hodpfx Ahoqvlu Eo Njng no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, Infrared Heated Press – LT Machines Infra Red Heated Press Brand new, unused!!! Manufacturer: LT Machines Device type: Infrared heated press Model: Infra Red Heated Press Control: Control panel with 12 independent heating zones Heating system: Infrared Hnedjw A Rdrepfx Ah Njg Overall dimensions: Width: 4000 mm Depth: 2600 mm Height: 2000 mm

Condition: used, Switchgear, control, flame sensor, flame monitor, UV flame sensor, UV sensor Hnjdpfxjf H Hy Aj Ah Nsg -Manufacturer: Siemens, infrared flame sensor OVP -Type: QRA55.C17 -Voltage: 100-110 V -Dimension box: 220/65/H65 mm -Weight: 0.5 kg

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: KIH 70-200, We are selling our own KIH 70-200 infrared heat tunnel, which we purchased brand new but never used. The machine is in perfect, scratch-free condition, just like a completely new unit. Hodpfx Ahowqw Sxe Neng The tunnel dryer with quartz tubes can be used for drying solvent-free inks (for example: plastisol for textile, or water-based inks in the textile and glass industry). The smallest type, KIH50-100 is often used for heat-treatment of digital prints on T-Shirts. Temperature, drying performance are stepless adjustable. Cooling of the ink is ensured by a cooling bridge.

Condition: used, Year of construction: 2011, Passage width: 3000 mm. Passage height: 30 mm. Hodpfxswptxls Ah Neng Inlet section to the system: Length approx. 2250 mm. Outlet section: Length approx. 3970 mm. Total length: approx. 10,220 mm.

Condition: new, functionality: fully functional, fuel type: gas, Year of construction: 2025, Equipment: 4 in one shovel, Infrared Asphalt Heater MIRA-1 Infrared Asphalt Heater MIRA-1 by TICAB TM is compact and powerful device. Best for small patch repairs. It is quite reliable and highly effective in use SPECIFICATIONS: - Propane fuel. - Controls - mechanical. - 2 gas bottles. - Consumption - 5-5.5 kg / h (depending on the outside temperature). Hnodpoq Rcrqefx Ah Nog - Weight 120 kg. Effective in the repair of: • Potholes. • Raising manhole and utility covers. • Failed pavement joints. • Joint asphalt repair.

Condition: new, Year of construction: 2025, functionality: fully functional, Suitable for e.g. workshop, warehouse (frost protection), greenhouse, barn, conservatory, camping awning Immediately ready for use - plug in and switch on Clean combustion - no chimney required very economical - fuel consumption approx. 4 l per day Can be controlled via app - set temperature, call up messages and fuel quantity directly on your smartphone Thermostat for automatic operation, setting range 0-40°C Dry heat - no condensation as with gas Mobile use thanks to 4 castors operated with biodiesel or diesel/red diesel Hedpfeqvlvmox Ah Nong low-noise - only 48 dB no dust - no fan no exhaust fumes - does not emit a burning smell Compliance with the new EU emissions directive Automatic restart after power failure

Condition: new, functionality: fully functional, machine/vehicle number: 364290, Year of construction: 2022, conveyor belt length: 4,500 mm, conveyor belt width: 1,400 mm, infeed height: 55 mm, infeed width: 1,460 mm, TECHNICAL DETAILS Use: Continuous furnace for medical technology Stainless steel housing (LxWxH): 3,750 x 1,720 x 675 mm Surface conveyor belt (LxW): 4,500 x 1,400 mm Conveyor system Conveyor belt height: 1,050 mm Openings belt inlet/outlet (WxH): 1,460 x 55 mm Free area belt inlet: approx. 250 mm Free area belt outlet: approx. 400 mm Conveyor belt operation: Cyclic operation Loading and unloading is carried out using robot handling and Profinet communication. MACHINE DETAILS Dimensions including belt and substructure (LxWxH): 4,500 x 1,720 x 1,510 mm Substructure made of stainless steel profile tube, height adjustable: ± 30 mm EQUIPMENT - Infrared heating fields for precise temperature control - PU conveyor belt for efficient material flow - Integrated control and regulation system - Height-adjustable stainless steel substructure for easy transport - Mechanically lockable service doors with viewing window - Control panel attached to the left side of the inlet - 6 service doors with viewing window (mechanical locking) - 2 exhaust air nozzles at the top (Ø 82 x 105 mm) - Traceability is ensured via the OPC-UA interface. Hodpev Akfqefx Ah Nsng HISTORY This oven was planned for a clean room area of a fully automated production line for the production of rapid corona tests and tests to detect multi-resistant hospital germs.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, controller model: iTNC Heidenhain 530, spindle speed (max.): 42,000 rpm, swivel angle C-axis (max.): 360 °, number of axes: 5, No minimum price – guaranteed sale to the highest bidder! The lot consists of 2x 5-axis HSC machining centers and pallet system with robot MIKRON HSM 600 U (serial number: 217.88.00.070) TECHNICAL DETAILS Travel X-axis travel: 800 mm Y-axis travel: 600 mm Z-axis travel: 500 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: +30° / –110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 360 rpm (2,160°/s) Torque (nominal): 340 Nm Torque (max.): 217 Nm max. Clamping torque: 1,400 Nm B-Axis Swivel range: +30° / –110° Swivel speed: 200 rpm (1,200°/s) Swivel torque: 640 Nm Clamping torque: 2,800 Nm Clamping surface: 320 x 320 mm Table load capacity: max. 120 kg Tool magazine: 68 stations Control: Heidenhain iTNC 530 Workpiece weight: max. 120 kg EQUIPMENT Rotary tilting table with Erowa UCP MIKRON HSM 400 U (serial number: 217.87.00.178) TECHNICAL DETAILS Travel X-axis travel: 400 mm Y-axis travel: 240 mm Z-axis travel: 350 mm Spindle Spindle speed: 42,000 rpm Tool holder: HSK 40 Axes B-axis swivel range: ±110° C-axis rotation range: 360° C-Axis Combination rotary table range: n x 360° Rotational speed: 250 rpm (1,500°/s) Torque (nominal): 132 Nm Torque (max.): 217 Nm max. Hnodpfxox Hx T Ao Ah Nog Clamping torque: 500 Nm B-Axis Swivel range: ±110° Swivel speed: 165 rpm (990°/s) Swivel torque (nominal): 485 Nm Swivel torque (max.): 686 Nm max. Clamping torque: 2,000 Nm Clamping surface: ITS 148 Powerchuck Table load capacity: max. 25 kg Tool magazine: 36 stations Control: Heidenhain iTNC 530 EQUIPMENT Rotary tilting table EROWA ROBOT MULTI TWIN Gripper station: 6 stations Grippers: various Storage system Rotary storage: 5 levels Level allocation Level 1: 5 x UCP 300 x 300 mm Level 2: 5 x UCP 300 x 300 mm Level 3: 15 x ITS 148 Level 4: 15 x ITS 148 Level 5: 30 x ITS 50 GENERAL EQUIPMENT Absolute measuring systems on all axes Infrared touch probe LASER Electronic handwheel for setup mode Graphite dust extraction 2x BURN WK 5806 Rotary pallet storage

Year of construction: 2025, condition: ready for operation (used), This Barberan WM-33 was manufactured in 2025. A profile wrapping machine designed for versatility, it handles various materials including PVC and aluminum. It supports a wide range of foil types and utilizes PUR hot melt adhesives. Key features include a max mechanical speed of 60 m/min, profile dimensions up to 300 mm wide and 120 mm high, and a total machine length of 6000 mm. Contact us for more information about this machine. Additional equipment • Machine bed, slot nozzle head, mounts for wrapping tools • Complete tool set for PVC/Aluminum profiles • Operator safety system and control cabinet • Set of nozzles for profile cleaning • Protective foil unwinder and hot air turbines • Infrared screen with lamps and tool cassette Machine Benefits Qualitative Machine Benefits • Machine entry section with heavy-duty steel frame • Transport rollers with motor-driven frequency converter • Integrated control cabinet Hnodpoyaa Utefx Ah Nsg • Emergency safety systems • Glue unit safety mesh • Operator control panel for adhesive management • Two 15 mm wide rollers per shaft, 240 mm diameter • Quick positioning in 5 mm steps • Air blowers & ionization for static and dust removal • Automatic primer station with precise application Technical Machine Benefits • The profile wrapping machine is designed to wrap profiles of various shapes, sizes, and materials using different foils with hot melt adhesives. • Operates as a standalone unit or part of a complete production line. • Capable of working with materials such as pvc, aluminum, and some composites. • Various foil types are compatible, special configurations may be needed for certain materials. • Profile dimensions: width 25–300 mm, length ≥600 mm, height 4–120 mm • Foil dimensions: width 25–330 mm, outer roll diameter ≤600 mm, inner roll diameter 76 mm • Max mechanical speed: 60 m/min • Working height: 900 mm • Voltage: 400v – 50hz • Compressed air: 6 bar Extra Information Machine still under power. 6 self-regulating heaters, expandable to 8. Slot Nozzle Head (330 mm) for adhesive application. Roll diameter up to 600 mm. Magnetic powder brake for tension control. Infrared screen for foil heating. Foil applied with shaped rubber rollers. Quick profile shape change system. For foil rolls up to 600 mm diameter. Height-adjustable for pressure control. The system is versatile with components designed to enhance processing efficiency and adaptability for various production needs. Dimensions Machine Depth 6000 mm

Condition: new, Year of construction: 2021, functionality: fully functional, Stock machine "NEW" – available at short notice! (Subject to prior sale) Control: Fanuc 0i-MF Plus, 10.4" with Manual Guide i & 2 MB NC memory LOOK-AHEAD function, 400 blocks Machine Table: Table size: 950 x 550 mm Load capacity: 800 kg T-slot width: 18 mm Number of T-slots: 3 Distance between T-slots: 150 mm Travel axes: Travel X/Y/Z: 860/550/550 mm Spindle nose to table surface: 150 – 700 mm Linear guides & speeds: Ball linear guides in X/Y axes Roller linear guide in Z axis Rapid traverse X/Y/Z: 40/40/30 m/min Feedrate during milling: 0 – 10,000 mm/min Smallest increment: 0.001 mm Tool magazine (CAM-Type) / changer: Number of magazine pockets: 30 System: random access Max. tool diameter: Ø 75 mm Max. tool diameter with adjacent pockets free: Ø150 mm (40 tools: Ø130 mm) Max. tool length: 300 mm Max. tool weight: 7 kg Spindle: Spindle taper: SK-40 Drive power (30min/cont.): 18.5/11 kW 15,000 rpm direct-drive spindle Spindle oil cooler Coolant, chip, and compressed air management: Coolant system incl. 300 liter tank and pumps External coolant around spindle Chip augers right and left in machine bed Compressed air nozzle at spindle (M32/M33) Compressed air through spindle (M38/M39) Compressed air and coolant gun Other features: Swiveling operator panel Electronic handwheel (wired) Central lubrication oil/air Full enclosure Work light Heat exchanger at control cabinet Auto power-off function Hand tool set Signal lamp Transformer 400 VAC, 50 Hz CE declaration of conformity according to European directives Electrical and pneumatic requirements: Electrical connection: 36 kVA Required pneumatic input pressure: 6 bar Dimensions: Machine size: W2,260 x D2,900 x H2,775 mm Required installation area: W3,160 x D3,000 x H3,000 mm (incl. chip conveyor ejection to the left) Machine weight: approx. 5,400 kg (net) Available special equipment: Spindle: Hnodpfoifn N Nox Ah Njg - Direct-driven spindle SK-40, 15,000 rpm - Drive power (30min/cont.): 18.5 / 15 kW, (FANUC motor) Tool magazine / changer: - Drum-type tool magazine with 30 pockets, DIN69871, SK-40 Rotary or additional axes: - Preparation for 4th axis (FANUC controls), incl. wiring and Harting connector, without axis drive Coolant, chip, and compressed air management: - Bed flushing - Through-spindle coolant pump, 20 bar pressure, for direct-driven spindles - Includes cartridge filter - Belt-type chip conveyor including chip cart (chip discharge at front, to the left side of the machine) Measuring and monitoring systems: - RENISHAW OMP-60 probe with infrared transmission system for workpiece measurement, incl. probe holder, repeatability: 1μm - RENISHAW NC4+ tool laser measurement system and tool breakage monitoring in the machine, incl. bracket - Auto-door (side door) - Pneumatic interface for workpiece clamping - Clamping devices as shown With RoboJob Mill Assist 25kg (Year of construction 2025 – NEW) - Full enclosure - Double gripper Available immediately

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, 3500 spindle hours • Universal milling head with controlled b-axis Hnodpsyaam Asfx Ah Nsg • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel" Serviced regularly... excellent condition... new spindle has 3,500 hours