Universal machining center

Deckel Maho DMU 60FD duoBlock

Condition: used, Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller manufacturer: Heidenhain, controller model: TNC 640, table load: 150 kg, spindle speed (max.): 20,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 170, tool weight: 6,000 g, Universal Machining Center Manufacturer: MIKRON Type: HPM 450U Year of manufacture: 2017 Control: Heidenhain TNC 640 Technical details: X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm B-axis: ° C-axis: 360° Spindle speed: 20,000 rpm Fedpfx Ahoz Ic Afe Eopp Drive power at S1/S6 (40% duty cycle): 23/36 kW Torque at S1/S6 (40% duty cycle): 77/120 Nm Tool holder: HSK-A63 Number of tool positions: 170 Tool change time:

Condition: good (used), overall weight: 42,000 kg, total width: 2,800 mm, total length: 12,400 mm, total height: 5,100 mm, BOLDRINI RIBO 30HY/6000 – Flanging & Dishing Machine Manufacturer: BOLDRINI (Italy) Model: RIBO 30HY/6000 Type: Hydraulic Flanging & Dishing Machine Fpedpfxozilu Ae Ah Esp Max. workpiece diameter: 6,000 mm Maximum plate thickness: 30 mm (cold forming) Year: 2002 Application: Dishing and flanging of tank heads, pressure vessel ends and dished ends. Length:12400mm Width:2800mm Height:5100mm Weight:42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2007, Retrofitted: 2026 Fjdpfxsy Nfz So Ah Eepp Numerical control: HEIDENHAIN TNC-i530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): -50 / 950 mmDistance between columns: 2500 mm Milling head Milling head: 2 axis continuous head C5ETool clamping system: HydraulicTaper nose: ISO-50 (DIN 69871)   /   Pull stud: (DIN69872)Speed range: 4000 rpmSpindle power: 37 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 35500 KgMachine dimensions approximate: 10923 x 6170 x 5250 mm Accessories Guarding: 2 sliding doors and new perimetral wire-mesh fenceElectronic handwheel: HR-410Coolant: external Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: excellent (used), Year of construction: 2017, CNC Turning and Milling Center DMG Mori CTX gamma 1250 CT (Year 2017) Available from March 2027 Base Machine - CTX gamma 1250 CT with turning length 1,250 mm - Main spindle as integrated spindle motor (ISM102) - Drive power: 35/45 kW (100/40% duty cycle) - Speed: 4,000 rpm - Partial hollow clamping device (hydraulic) - Draw tube inner diameter: 104 mm, depth: 848 mm - C-axis and hydraulic spindle brake - Chuck flushing device on main spindle (external) - Upper cross slide with turning/milling spindle as motor spindle: - Speed: max. 12,000 rpm - Power: 27 / 36 kW (100% / 40% duty cycle, 2 min) - Torque: 160 / 220 Nm (100% / 40% duty cycle, 2 min) - Hydraulic clamping during turning - Tool interface: HSK-A 63 DIN 69893 - Y-axis: ±210 mm - B-axis: ±120°, torque motor - Tool disc magazine: 36 positions - NC tailstock with supported, hydraulically movable quill and fixed center - Absolute, direct linear measurement systems in X-, Y-, and Z1-axis - Coolant pump: 6 bar, 20 l/min, fabric filter, filter fineness 100 µm - Cooling system for spindle motors, motor unit, turning/milling spindle, and B-axis torque motor - Control: CELOS® with Siemens 840D sl Operate and ShopTurn 3G Control & Operation - CELOS® with Siemens 840D solutionline Operate including 21.5" ERGOline® Control with multi-touch display - APPs for simplified machine operation Fpjdpfsy A Hq Iex Ah Eep - Comprehensive management, documentation, and visualization of order, process, and machine data - Networking with CAD/CAM and compatibility with PPS/ERP Enhanced Equipment - Tool chain magazine: 120 positions (instead of 36-position disc magazine) - Tool interface: HSK-A 63 DIN 69893 - Mechanical oil mist separator - Capacity: 1,100 m³/h, filter class H13 - 4-color signal lamp - "BLACK" design variant - Work area door, front panel, and front window frame in deep black - Tropical package for ambient temperatures up to 40 °C - Includes control cabinet cooling unit - Energy measuring device - 3D data model of machining area (STEP & IGES) – supplied on CD - Electrical Profibus interface for 6-axis robot - (Only with Siemens control) Special Equipment / Options - Grinding preparation (using CBN cup tools), consisting of: - Shortened grease lubrication cycle - Plug sealing in draw tube - Flushing of Z1/X1 telescopes during machining - HT 2 control hand unit - Jog mode, creep mode, and incremental adjustment via handwheel - Integrated emergency stop function and feed override - Tailstock with increased feed force (20 kN) Hydraulically actuated double-piston chuck Forkardt OZRDI 150, consisting of: - Integrated pressure converter - Piston rod clamping - Stroke monitoring unit with switching cone for clamping piston Ø150 mm - Maintenance-free 5-channel oil supply - Safety valve system for clamping piston Ø150 mm Condition The machine has been regularly serviced by DMG Mori customer service and is in technically flawless condition. An inspection under power or during ongoing production is possible. Dimensions & Weight - Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg - Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg - Total weight including accessories: approx. 22,605 kg - Number of packages: 11 - Loading meters: approx. 21 The complete equipment and further technical data are available in the documentation, which we are happy to provide upon request. Disassembly, removal, shipping, and recommissioning can be organized.

Condition: used, Year of construction: 1965, groove width 3 - 90 mm Fpedpfx Astv Iatjh Ejp drawing length 430 mm working speed 4 - 12 m/min slot-milling length 400 mm return speed 15 m/min total power requirement 5,5 kW weight of the machine ca. 1,4 t dimensions of the machine ca. 1,3 x 1,7 x 1,5 m • with various honing needles and guidances

Condition: used, grinding diameter / mm Fedpfxszgipxj Ah Espp grinding length 4000 mm swing diameter / mm

Condition: used, Year of construction: 2014, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2014 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1250/1250/1000 mm Tool holder : HSK-A100 Spindle: Fpsdpfx Ahj Ah Adio Esp Technology:Motorspindle Speed:12.000 rpm Power:52 kW Torque:430 Nm Taper:HSK-A100 Cooling:Switching Coolant/Blow air NC-Swivelhead: Technology:Universal millinghead B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: Technology:Roundtable with Palletcarrier C-Axis:0,001° Clamping surface:1.000 x 800 mm Tableloading (max.):2.000 kg In general: Toolmagazine:Chainmagazine (2 chains), 240 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter, temperature control and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, m&h IRP 25.41 Toolmeasurement:Laser, BLUM NT Automation:Palletchanger, 2-fold Oilmistseparation:Interface mechanical prepared Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: excellent (used), Year of construction: 2015, operating hours: 12,068 h, functionality: fully functional, workpiece weight (max.): 20 kg, spindle speed (max.): 10,500 rpm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 5,200 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 14,500 W, input voltage: 400 V, CNC Tool grinding machine WALTER Helitronic Power Diamond TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: FANUC Series 31i-B5 Software installed: Tool Studio 2.1 R8 Colour touch screen: 15 ["] Number of axes: 5 Stroke X axis: 460 [mm] Resolution X axis: 0.0001 [mm] Stroke Y axis: 320 [mm] Resolution Y axis: 0.0001 [mm] Stroke Z axis: 660 [mm] Resolution Z axis: 0.0001 [mm] Traversing feeds X, Y and Z axes: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Resolution C axis: 0.0001 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Grinding spindle attachment: HSK-50 Max. grinding wheel speed: 10500 [rpm] Grinding spindle motor power: 14.5 [kW] Max. diameter grinding wheel: 200 [mm] Workpiece spindle nose: ISO 50 Max. part weight in part holder headstock: 20 [Kg] Working hours: 12068 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 80 [l/min] Supply voltage: 400 [V] Total power required: 20 [kVA] Weight: 5200 [Kg] ADDITIONAL EQUIPMENT: CO2 fire extinguishing system (to be inspected by the buyer through a qualified body) A-axis for cylindrical grinding (Hollowshaft option) 8-position grinding wheel changer Electrostatic mist separator with noise silencer, DSL type AES-GAMMA 30 Fpjdpfx Ao Ahpfboh Eop Hydraulic and electrical connections for automatic steady rest operation Automatic steady rest Manual tailstock Combined filtration system with paper band filter + cartridge filters, connected to a cutting fluid cooling unit 3-color signal tower light "Eco Loader" tool loader with its tool clamping system and 5 cassettes (Ø6, Ø8, Ø10, Ø12 and Ø16) E386ES tool clamping chuck with 5 collets (Ø8, Ø10, Ø12, Ø16, Ø20) Grinding wheel holders x2 electrode holders L = 25 mm x1 electrode holder L = 45 mm x5 grinding wheel holders L = 45 mm SOFTWARE: TOOLSTUDIO Standard & Advanced TOOLSTUDIO Step Tools License TOOL STUDIO PC License WALTER WINDOW MODE (P1, P2 & P3) for grinding (P51 & 52 for erosion) WALTER WINDOW MODE Package 63 for PCD drills More information upon request.

Condition: used, Year of construction: 2004, Solid drill diameter 200 mm bore depth / mm number of spindles / Technical data Power: 129 kW Control: Siemens NC control Speed range (stepless): 2 - 300 rpm Feed range (in steps): 3 - 4500 mm/min Oil system capacity: 20,000 litres Maximum delivery rate: 1500 l/min Circular diameter in steady rest: 1100 mm Circular diameter over bed: 1250 mm Centre distance: 11000 mm Clamping diameter face plate: up to 1100 mm Max. workpiece weight with one tailstock: 10 t Clamping range of the two steady rests: 150 - 1100 mm Clamping range BOZA: 1 = 200 - 400 mm 2 = 400 - 800 mm Dimensions Min. outer diameter: 406 mm Max. outer diameter: 850 mm Wall thickness: 10–150 mm Fsdpjxgic Esfx Ah Eopp Max. workpiece length: 11,000 mm Max. workpiece weight: 10 t Max. strength: 800 N/mm² Specific cutting resistance (Ks): 2000–2100 N/mm² Machine data Machine length: 28,800 mm Centre height: 560 mm Swing diameter over bed: 1120 mm Full drilling diameter: 200 mm Core drilling diameter: 350 mm Reaming diameter without drilling: 350 mm Reaming diameter with drilling: 350 mm Headstock: Main drive motor: Siemens Type: 1 PH 7228 Performance data at 1,000 min: 113 kW / 1,079 Nm Performance data at 1,150 min: 129 kW / 1,017 Nm Main gearbox: Z-F manual gearbox Type: 2 K210 Switchable gear ratios: i = 1:1 i = 1:4 Fixed gear ratio for spindle: i = 11.68 Max. torque: 50,000 Nm Speed range I: 2...300 min Speed range II: 2 ...75 min

Condition: good (used), functionality: fully functional, Various Erowa tool holders / tool holders are for sale. All holders are functional and tested by us. Can be purchased individually or as a package 1: ER-020571 2: ER-016841 3: ER-016841 4: ER-016841 5: ER-016841 6: ER-016841 7: ER-016917 Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale Fpodpfstwz N Tex Ah Eop PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Dndpw7 For further information or contact options, please visit our website