Used Pressure Press for sale (28,036)

Condition: new, Technical specification: Chamber volume: 1200 litres Working compartment: 1700 x 850 x 680 mm, Cleaning capacity: up to 30 m2 / h Weight 340 kg Power supply: 230V ~ / 50Hz Nominal working pressure: up to 12 bar Degree of cleaning: SA-3.0 (very deep and extensive corrosion) Air requirement: 1000 l / min (for 4.0 mm nozzle) Maximum air flow: up to 12,500 l / min Supported nozzle diameters: from 2 to 15 mm Grinding valve: CLEMCO Nozzle material: tungsten carbide Sight glass Dimensions: 220 x 730 [mm]. Work table load: up to 300 kg Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) Coating protection: Powder coating Working temperature: 10 to + 50 degrees Celsius Shared work table: Yes Inspection valve: Yes The picture shows an example for the configuration of the pressure blasting boiler SCP-1200-12 THE OFFER INCLUDES: Pressure blasting cabin Land Reko SCP-1200-12 Boron carbide nozzle: 2, 2.5, 3, 3.5 or 4 mm (optional) Protection leather gloves Holder for hanging details Foot control pedal Pneumatic connection CE Declaration of Conformity User manual in German language 24 months warranty for consumers 24 months guarantee for entrepreneurs Professional service after the warranty Credpfx Ajft Sr Djf Ish Device also available in leasing or financing Unit On order. Delivery time 4 weeks from order.

Condition: used, Falch 3 phase high pressure cleaner 500 bar pressure @ 15lpm only done about 360 hours and works perfectly. Sold with trigger but no hose used for cleaning boat hulls stone work excavator tracks and any cleaning where very high pressure is required Crsdpfsxc Numex Af Ieh

Condition: good (used), Rebuilt by Doornbos 2020 with new Volvo engine, 750bar 80 liter/min, WOMA pump and Hammelmann ES2 control Crjdpevpl Hcsfx Af Ioh

Condition: refurbished (used), operating hours: 4,251 h, functionality: fully functional, machine/vehicle number: G40800101, operating pressure: 2,000 bar, Listing: Falch Wheel Jet 30 2000-8-0-e – High-Pressure Cleaner Technical specifications: Model: Falch Wheel Jet 30 2000-8-0-e Year of manufacture: not specified (comprehensively overhauled by Falch in 11/2022) Operating hours: 4,251 h (only 25 h in current operation since overhaul) Condition: as-new, inspected & immediately ready for use Drive: Electric, 30 kW Pressure range: 50 – 2,000 bar Flow rate: 4 – 8 l/min Sound level: approx. 86 dB (LpA), 103 dB (LwA) Dimensions: approx. 1,273 × 987 × 1,066 mm Operating voltage: 460 V, 63 A Cold water operation, mobile design Scope of delivery: - High-pressure unit Falch Wheel Jet 30 2000-8-0-e Codpowynu Nefx Af Ierh - Accessories (lance, gun, hose package, etc.) - Operating manual / documentation (upon request) Special features: - Directly from certified specialist dealer - Original Falch factory overhaul (11/2022) - Only 25 operating hours under our ownership - Ideal for industrial applications, paint removal, concrete removal, etc. - Condition close to new, immediately available

Condition: excellent (used), Year of construction: 1990, High pressure fan, dust extraction fan, pressure fan, vacuum fan, high pressure fan VRU 15-100-30H2.8 Condition: Used Crjdpsvlz Arjfx Af Ieh Drive motor: 3.5 kW p1:1.15kg/m3 Speed: 2880 rpm Volume output: 0.315m³/s Pressure point:62 mbar Connection input: Ø 100mm Connection output: Ø 100mm Dimensions: 1000x600x700 mm Mass: 180 kg Location: from stock 54634 Bitburg - immediately available -

Condition: used, Mixing Tank, Pressure Vessel, Used Machine Manufacturer: Robert Hinkel & Co Model: 9601 Volume: 200 L Operating Pressure: 3 bar Electrical Data: 380V; 2.0A; 0.75 kW Overall Dimensions: Ø 850 mm, height 1780 mm Crsdpfoxacl Tox Af Ijh Design: Cylindrical tank with shallow-dished top and bottom, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable, secured with a flanged bolted connection. The lid includes a cleaning/inspection opening. Material: Carbon steel with painted surface

Condition: new, Technical specification: -chamber volume: 550 litres -Work tray: 1150 x 700 x 550 mm, -cleaning capacity: up to 20 m2 / h -weight 220 kg -power supply: 230V ~ / 50Hz -Nominal operating pressure: up to 12 bar -Degree of cleaning: SA-3.0 (very deep and extensive corrosion) -air requirement: 1000 l / min (for 4.0 mm nozzle) -Maximum air flow: up to 7,500 l / min Supported nozzle diameters: from 2 to 10 mm -grinding valve: CLEMCO -nozzle material: tungsten carbide Sight glass Dimensions: 220 x 730 [mm] - Sight glass -Worktable load: up to 250 kg -Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) -Coating protection: Powder coating -working temperature: 10 to + 50 degrees Celsius -Shared work table: Yes -Inspection valve: Yes -Weight: 220 kg The picture shows an example for the configuration of the pressure blasting boiler SCP-550-12 THE OFFER INCLUDES: -Pressure blasting cabin Land Reko SCP-550-12 -boron carbide nozzle: 2, 2.5, 3, 3.5 or 4 mm (optional) -Protection leather gloves -holder for hanging details Crjdpfx Afoft Srgs Ijh -foot control pedal -Pneumatic connection -CE Declaration of Conformity -user manual in German language -24 months warranty for consumers -24 months guarantee for entrepreneurs -Professional service after the warranty -unit also available in leasing or financing

Condition: good (used), We are selling a large pressure blasting cabin from Wiwox, year of manufacture 2008, with 1,172 operating hours recorded. The cabin has a blasting area of 220x140x120. It comes with a discharge table and a turntable for up to 1 ton. Crjdpfxsxcirro Af Ish

Year of construction: 2000, condition: good (used), Pressure beam for circular saw for clamping panels or veneers for 3 m sliding carriage Codpfx Aotxirfsf Isrh

Condition: used, Pressure tank hose cellar with 7 pressure tanks. - 2 x 104 hl, 3 bar (Gross, 1983/1984) - 2 x 104 hl, 3 bar (Edel, 1978) - 1 x 92 hl, 3 bar (Ziemann, 1963) - 1 x 40 hl - 1 x 50 hl - Various pumps and hoses Csdpfx Afsw Uvbls Ijrh Additional title: 7 pressure tanks Material: stainless steel Features: Pressure tank cellar with uninsulated, uncooled pressure tanks. 2 x 104 hl, 3 bar (Gross, 1983/1984), 2 x 104 hl, 3 bar (Edel, 1978), 1 x 92 hl, 3 bar (Ziemann, 1963), 1 x 40 hl, 1 x 50 hl

Condition: new, Pro Sandblaster for Industry Pressure Unit SAPI Mammut Sandblasters with QUICK STOP™ System The SAPI Mammut sandblasters with the QUICK STOP™ system are powerful industrial sandblasting machines, designed for use in industries such as automotive, construction, and manufacturing. These machines ensure fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other materials. QUICK STOP™ – Safety & Protection The SAPI QUICK STOP™ system is a safety feature designed to prevent accidents and protect the machine from damage. It works by immediately stopping the blasting process as soon as the operator releases the control handle. This instantly cuts off the abrasive flow, preventing potential hazards and protecting the equipment from overuse-related damage. Efficiency & Durability The QUICK STOP™ system reduces air and fuel consumption, making the sandblasting process more efficient and cost-effective. The Mammut sandblasting machine is built for durability, featuring high-quality components that ensure consistent performance, even in harsh conditions. All our machines are fully CE- and TÜV-certified. Flexibility & Versatility The machine is available in different sizes to meet various sandblasting needs. It is compatible with a wide range of abrasive materials, from standard sand to specialized plastic or metallic media. The Mammut with QUICK STOP™ can be used for surface preparation, cleaning, and removing rust, paint, and coatings. Crjdpjupyw Eofx Af Ijh Precision & User-Friendliness The Mammut with QUICK STOP™ allows for precise pressure control and adjustment during operation, ensuring consistent results and high accuracy. Additionally, inspection and maintenance access points are designed for easy upkeep. Maximum Safety The QUICK STOP™ system with a dead man’s switch ensures maximum safety during operation. It also prevents moisture buildup inside the machine, as pressure remains constant even when blasting stops—a major advantage over standard on/off blasting systems. Fully Equipped from the Start All Mammut sandblasters with QUICK STOP™ come fully equipped. Our standard package includes: ✔ Sandblasting hose ✔ Nozzle ✔ Pressure control valve ✔ Water separator ✔ Abrasive dosing valve ✔ Basic personal protective equipment

Condition: ready for operation (used), High-Pressure Washer, Aquajet 11 S2500 HDP 114 (Hammelmann HDP114), Used Machine Manufacturer: Hammelmann Model: HDP 114 S 2500 Overall Dimensions: Width: 3800 mm Depth: 1720 mm Height: 1730 mm Year of Manufacture: 1996 Flow Rate: 17 liters/min Operating Pressure: 2000 bar Codpsw U U I Dofx Af Ijrh Diesel Engine: Deutz Model: BF6L 913 Engine Power: 96 kW

Condition: new, Technical specification: Chamber volume: 850 litres Work compartment: 1650 x 800 x 620 mm, Cleaning capacity: up to 25 m2 / h Weight 310 kg Power supply: 230V ~ / 50Hz Nominal working pressure: up to 12 bar Degree of cleaning: SA-3.0 (very deep and extensive corrosion) Air requirement: 1000 l / min (for 4.0 mm nozzle) Maximum air flow: up to 12,500 l / min Supported nozzle diameters: from 2 to 15 mm Grinding valve: CLEMCO Nozzle material: tungsten carbide Sight glass Dimensions: 220 x 730 [mm]. Csdpoft Srnofx Af Isrh Work table load: up to 300 kg Lighting: LED, adjustable in a range of +/- 90 degrees (two parts) Coating protection: Powder coating Working temperature: 10 to + 50 degrees Celsius Shared work table: Yes Inspection valve: Yes The picture shows an example for the configuration of the pressure blasting boiler SCP-850-12 THE OFFER INCLUDES: Pressure blast cabin Land Reko SCP-850-12 Boron carbide nozzle: 2, 2.5, 3, 3.5 or 4 mm (optional) Protection leather gloves Holder for hanging details Foot control pedal x 2 Pneumatic connection CE Declaration of Conformity User manual in German language 24 months warranty for consumers 24 months guarantee for entrepreneurs Professional service after the warranty Device also available in leasing or financing

Condition: ready for operation (used), machine/vehicle number: 838 621, minimum pressure: 180 mbar Csdpfx Aodzw I Njf Isrh at suction capacity: 2,2 m³/min outlet nozzle-Ø: 50 mm rotational speed: 2780 rpm drive motor: 220/380 V, 0,95 kW space requirement: 510 x 350 x 480 mm

Condition: used, Elektror HRD 2/5 M high pressure fan 27m3/min Pressure: 8600 Pa Voltage: 230/400V Air delivery: 27 m3/min Weight: 43kg Power: 3.1 kW Impeller diameter: 350mm Suction side connection: 165 mm Crjdpfoufkn Ssx Af Ijh Blower side connection: 180 mm

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Crsdpfxowc Ri Is Af Ieh Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Year of construction: 1979, condition: used, machine/vehicle number: 79-207, jaw width: 125 mm jaw height: 42 mm Crsdpe Avhdofx Af Ish span width: 202 mm

Condition: excellent (used), Pressure centrifugal pump Vertical centrifugal pump Grundfos CR 90-3 A-F-A-E-EUBE more piece Crsdpfx Afjhy Nx Ee Ish Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301) Rated flow 90 m³/h Rated head 65.5 m Max pressure at stated temp 16 bar / 120 °C Type of connection DIN Size of inlet connection DN 100 Pumped liquid Water Liquid temperature range 0 .. 120 °C Selected liquid temperature 20 °C Density 998.2 kg/m³ Electrical data Motor type SIEMENS Rated power - P2 22 kW 2940 rpm Mains frequency 50 Hz Rated voltage 3 x 380-415D/660-690Y V Rated current 41,5-39,5/24,0-23,5 A Cos phi - power factor 0.86 Rated speed 2945 rpm Number of poles 2 Enclosure class (IEC 34-5) IP55

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Crsdpfx Afswc Rk Ee Ish Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: good (used), for oxygen, Pressure side: 0 - 400 bar Reduction side: 0 - 40 bar incl. connection nipple for oxygen cylinders Cjdpfedq Hvysx Af Iorh

Condition: good (used), functionality: fully functional, rotational speed (min.): 2,840 rpm, volume flow: 3,240 m³/h, pressing: 10,000 Pa, power: 18 kW (24.47 HP), High pressure centrifugal fan, dust extraction fan, pressure fan, vacuum fan, centrifugal fan, high pressure fan Spellna VRU 15-125-30H3 Condition: used impeller: forward curved steel, direct drive. 700mm Drive motor:18 kW p1:1,2kg/m3 pressure:9500-12000Pa Number of revolutions:2950rpm air transport:3240m3/h Volume output:0.9m³/s Print pt:100 mbar Connection input:Ø 300 mm Connection output:Ø 200mm Dimensions: 1400x1400x960mm Codeticdlspfx Af Ijrh Mass: 350

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Csdpfx Aswc Afhjf Isrh Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: good (used), machine/vehicle number: 897, Jaw width: 160 mm Credpfx Afeb Dimve Ioh Jaw height: 50 mm Clamping width: 280 mm Overall height: 130 mm

Condition: good (used), jaw width: 160 mm jaw height: 50 mm Cedpfod D H Nfox Af Ijrh span width: 0 - 305 mm span power: 5000 daN total height: 140 mm

Year of construction: 1997, condition: ready for operation (used), machine/vehicle number: 41110, Nominal pressure: 110 bar with existing delivery volume: 6 l/min max. supply pressure: 12 bar Crsdpjd D U T Rjfx Af Ish electrical connection: 230 V, 1,5