Used Press Station for sale (16,286)

Condition: used, Year of construction: 2014, total length: 1,500 mm, total width: 1,150 mm, total height: 2,400 mm, Weight: 3.600 kg - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 441 - Power [kW]: 3.0 - Press force [ton]: 28 - Max. working width [mm]: 1000 - Column gap [mm]: 950 - Throat depth [mm]: 220 - Backgauge depth [mm]: 415 - Transport dimensions: 1500mm x 1150mm x 2400mm (l x w x h) - Transport weight [kg]: 3600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Fjdpfx Acsxapftjwspf

Condition: used, Year of construction: 1981, total length: 2,000 mm, total width: 1,100 mm, total height: 2,300 mm, Empty weight: 500 kg Price: On request - Year: 1981 Fpjdpoxhcgyjfx Acwjf - Documentation available: No - CE certificate present: No - Press force [ton]: 63 - Table length [mm]: 710 - Table width [mm]: 505 - Ram width [mm]: 280 - Throat depth [mm]: 250 - Transport dimensions: 2000mm x 1100mm x 2300mm (l x w x h) - Transport weight [kg]: 500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Fensterpresse Orma Max. 4000x2700mm 380V, 2,2kW Fjdpfjx Svw Nsx Acwopf - Documentation available: No - CE certificate present: No - Max. workpiece width [mm]: 4000 - Max. workpiece height [mm]: 2700 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2004, total length: 2,650 mm, total width: 1,450 mm, total height: 2,620 mm, Empty weight: 2.500 kg - Year: 2004 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 180253 - Drive system: Conventional - Press force [ton]: 150 - Max. stroke [mm]: 340 - Table width [mm]: 1570 - Ram length [mm]: 280 - Ram width [mm]: 200 - Height adjustment [mm]: 800 - Pressing speed [mm/s]: 5 - Column spacing width [mm]: 1570 - Transport dimensions: 2650mm x 1450mm x 2625mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Fpjdpjytghtefx Acwof Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2004, total length: 4,600 mm, total width: 2,200 mm, total height: 3,000 mm, Weight: 21.500 kg Price: On request - Year: 2004 - Documentation available: No - CE marking present: Yes Fpedpjyvt Dzofx Acwjf - CE certificate present: No - Serial number: 12.2235 - Drive system: CNC - Power [kW]: 33.5 - Press force [ton]: 300 - Max. working width [mm]: 4300 - Column gap [mm]: 3700 - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 4600mm x 2200mm x 3000mm (l x w x h) - Transport weight [kg]: 21500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total length: 2,500 mm, total width: 2,400 mm, total height: 2,400 mm, Weight: 4.000 kg - Documentation available: No - CE certificate present: No - Drive system: CNC - Press force [ton]: 40 Fsdpfx Acsxwmwbjwspf - Max. working width [mm]: 2050 - Column gap [mm]: 2050 - Options: Finger safety guard - Transport dimensions: 2500mm x 2400mm x 2400mm (l x w x h) - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, total length: 1,350 mm, total width: 2,550 mm, total height: 2,700 mm, Empty weight: 7.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 5499 - Drive system: Conventional - Press force [ton]: 63 - Max. stroke [mm]: 200 - Table length [mm]: 630 - Table width [mm]: 525 - Ram length [mm]: 1100 - Motor power: 20.0kW - Transport dimensions: 1350mm x 2550mm x 2700mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fpodpfx Acsx Ad Hkswof Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2020, operating hours: 2,018 h, total length: 4,000 mm, total width: 2,300 mm, total height: 2,850 mm, Weight: 10.520 kg Price: On request Fpjdpfx Aeyypfiocwef - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 73332015912 - Operating hours: 2018 - Drive system: CNC - Power [kW]: 18.5 - Press force [ton]: 175 - Max. working width [mm]: 3100 - Column gap [mm]: 2500 - Backgauge depth [mm]: 600 - Max. stroke [mm]: 195 - Tools included: Yes - Transport dimensions: 4000mm x 2300mm x 2850mm (l x w x h) - Transport weight [kg]: 10520kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, total width: 2,300 mm, total height: 2,300 mm, total length: 4,900 mm, Empty weight: 2.500 kg Fsdpfx Acoyq Iitswopf - Details: - └ Description: Machine is currently not working, needs repair. Has been used to fill bags of sawdust briquette dimensions 430x310 mm - Documentation available: No - CE certificate present: No - Transport dimensions: 4900mm x 2300mm x 2300mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm Fsdpfx Acjwnhabjwopf - Details: - └ Description: Osama glue roller is no longer available - Documentation available: No - CE certificate present: No - Number of cylinders [pcs]: 6 - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1998, total length: 3,350 mm, total width: 2,180 mm, total height: 2,780 mm, Weight: 9.000 kg Price: On request - Year: 1998 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 230 - Drive system: Conventional - Power [kW]: 11.0 - Press force [ton]: 160 - Max. working width [mm]: 3100 Fodpfxoyrpvko Acwepf - Column gap [mm]: 2550 - Tools included: Yes - Options: Digital readout - Transport dimensions: 3350mm x 2180mm x 2780mm (l x w x h) - Transport weight [kg]: 9000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, total length: 3,400 mm, total width: 1,800 mm, total height: 2,600 mm, Weight: 10.400 kg Price: On request - Year: 1994 - Documentation available: No - CE certificate present: No - Serial number: 1776 - Drive system: Conventional - Power [kW]: 22.0 - Press force [ton]: 220 - Max. working width [mm]: 3050 - Column gap [mm]: 2620 - Backgauge depth [mm]: 800 - Max. stroke [mm]: 240 - Tools included: Yes Fpjdpfxsybdtcs Acwof - Options: Digital readout - Transport dimensions: 3400mm x 1800mm x 2600mm (l x w x h) - Transport weight [kg]: 10400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Veneer press Feed-through press HOT Colombo Machine dimensions: 4400x1400 Oil heated input/output is included 8 cylinders Complete with glue roller etc. - Documentation available: No - CE certificate present: No - Number of stages [pcs]: 1 - Number of cylinders [pcs]: 8 - Heating type: Oil heated Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fpedjwnhvvjpfx Acwof Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2020, total length: 2,450 mm, total width: 1,900 mm, total height: 2,140 mm, Weight: 5.500 kg - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Drive system: CNC - Power [kW]: 4.0 - Press force [ton]: 40 - Max. working width [mm]: 2000 - Column gap [mm]: 1800 - Throat depth [mm]: 200 - Backgauge depth [mm]: 750 - Max. stroke [mm]: 100 - Tools included: Yes - Options: Finger safety guard - Transport dimensions: 2450mm x 1900mm x 2140mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Fjdpfxeyg Hhmo Acwopf Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2002, condition: ready for operation (used), A repair-required Safan CNC press brake is available. Working width: 2050mm, press force: 400kN, ram stroke: 180mm, installation height: 450mm, closing speed: 90mm/s, working speed: 20mm/s, machine dimensions X/Y/Z: approx. 3000mm/1500mm/2500mm, weight: approx. 5000kg. The tool clamping system of the machine is defective. Documentation available. An on-site inspection is possible. Fedpeyz Anajfx Acwepf

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor Fpjdpfx Acoyz Af Eewsf – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 290/02, functionality: fully functional, Ulrich Schöwerling Delta Z50 de luxe – Hydraulic Baling / Press Machine The Delta Z50 de luxe, manufactured by Ulrich Schöwerling Maschinenbau, is a heavy-duty vertical hydraulic baling and pressing machine designed for efficient compaction of various industrial and waste materials. Thanks to its solid construction, powerful hydraulic system and simple operation, it is well suited for warehouses, production facilities and recycling plants. The machine operates via an electric motor-driven hydraulic unit. The press platen moves vertically from top to bottom, ensuring effective compression. The design allows for bale tying, making the finished bales easy to handle and transport. ⚙️ TECHNICAL PARAMETERS • Manufacturer: Ulrich Schöwerling Maschinenbau (Germany) • Model: Delta Z50 de luxe • Machine No.: 290/02 • Machine type: Vertical hydraulic baler / press • Power supply: 400 V • Frequency: 50 Hz Fpedpfeyghhhex Acwef • Current consumption: 16 A • Motor power: 8 kW • Machine weight: approx. 850 kg • Certification: CE compliant Typical applications: paper, cardboard, plastic film, textiles and other compressible industrial materials

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 1214, product width (max.): 250 mm, working width: 240 mm, product height (max.): 381 mm, sheet thickness aluminum (max.): 2 mm, roll width: 250 mm, roll diameter: 700 mm, year of last overhaul: 2023, type of input current: three-phase, inner diameter: 76 mm, film width: 250 mm, heating capacity: 5 kW (6.80 HP), overall weight: 7,883 kg, operating speed: 2,916 mm/s, total height: 1,970 mm, total length: 7,160 mm, total width: 1,920 mm, The Nilpeter FA2500 is a well-known narrow web flexographic printing press designed for high-quality label and flexible packaging production. Nilpeter is a globally recognized manufacturer with a long history of innovation in flexo printing technology, supplying reliable and efficient presses to converters worldwide. The FA series is particularly valued for its robust construction, printing accuracy, and versatility across a wide range of substrates. This Nilpeter FA2500 label press is configured with 8 colour flexographic printing units, allowing for complex and high-quality print jobs. With a maximum web width of 260 mm, the machine is well suited for label production where precision and consistent print quality are essential. Flexographic printing is widely used in the label industry due to its efficiency, fast setup times, and ability to print on various materials. Fpsdpfxoyf E Tfj Acwef The press is equipped with electric and UV drying systems, supporting efficient ink curing and stable production speeds. UV drying is commonly used for achieving excellent print quality and durability, especially for demanding label applications. The combination of drying technologies provides flexibility in ink choices and production requirements. Additionally, this FA2500 includes 3 die cutting units, enabling inline converting and finishing. Die cutting is an important feature for label production, allowing printed material to be finished directly on the press, improving workflow efficiency and reducing the need for additional offline equipment. Overall, the Nilpeter FA2500 is a proven flexo label printing press, suitable for converters looking for a reliable solution for high-quality label production within the narrow web segment.

Condition: refurbished (used), Year of construction: 1993, functionality: fully functional, machine/vehicle number: 02240, power: 5.5 kW (7.48 HP), empty load weight: 3,300 kg, Press container Allpress RIES SP 50, technically overhauled, in good condition for paper, cardboard or plastics as a recyclable or waste compactor. Price ex works Karlsruhe; upon delivery, a new UVV safety inspection according to DGUV Information 216-016 will be carried out. Fjdpfx Acoyzzqyewjpf

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total height: 1,600 mm, total width: 1,000 mm, overall weight: 1,500 kg, input voltage: 400 V, Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. HYDRAULIC PRESS BRAKE 1320x40 MM Touchscreen control + SERVO The press brake is used for sheet metal forming. During the ram cycle, the sheet can be bent to match the required geometric profile. The machine can be used in many industries, including electromechanical, light industry, agricultural machinery production, shipbuilding, automotive, and aerospace industries. Technical Data: Nominal force: 400 kN (40 tons) Working table length: 1320 mm Distance between columns: 900 mm Throat depth: 180 mm Ram stroke: 100 mm Daylight: 290 mm Back gauge range: 500 mm Approach speed: 80 mm/s Working speed: 9 mm/s Return speed: 80 mm/s Main motor power: 4 kW Dimensions: 1500 × 1300 × 1600 mm AMADA Tool Clamping System: Each press is equipped with a quick and safe tool clamping system. The Amada-Promecam system is a reliable manual technology that allows fast tool insertion without additional tools. Control System MTP 3212: Modern controllers combining ease of use with advanced programming capabilities. Touchscreen interface Automatic bending angle calculation Storage of thousands of programs Functions: Manual programming (no visualization) Tool library and editing SD card memory Crowning correction: YES Angle correction: YES Axis correction: YES Safety: Side guards – protection against accidental contact Light curtains – stop the machine when intrusion is detected Rear safety zone – prevents access from the back Fpedpfoyr N E Ejx Acwjf Delivery available. Transport cost quoted individually.

Condition: used, functionality: fully functional, pressing force: 10 t, stroke length: 115 mm, table width: 470 mm, table length: 360 mm, throat depth: 190 mm, distance table to ram: 210 mm, total length: 1,470 mm, total width: 1,400 mm, total height: 1,800 mm, overall weight: 430 kg, Manual spindle press with C-frame Pressing force: 10 tons Clamping area: 470 x 360 mm Maximum installation height between table and ram: 210 mm Throat depth: 190 mm Spindle stroke: 115 mm Table bore: Ø 100 mm Pin bore: Ø 32 mm Weight: 430 kg Dimensions: Width: 1470 mm (ring diameter) Depth: 1400 mm Height (including Euro pallet): 1800 mm Year of manufacture: unknown Included accessories: - 10 pins Ø 32 mm - 2 clamping claws - 1 bending die base with adjustable micrometer stop - 4 bending punches Fjdpfxoyzy R Eo Acwepf The press has been rarely used and is therefore in very good condition. The hand-scraped, adjustable dovetail guides are also in excellent condition. The spindle shows no signs of wear. Sale is due to impending retirement. Inspection possible during our business hours or by appointment.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, pressing force: 80 t, control type: CNC control, Equipment: safety light barrier, 1 Used Very Clean Amada 8025 cnc down stroke hydraulic pressbrake for sale The Amada HFT 8025 is a CNC hydraulic down-stroking press brake designed for precise sheet metal bending with an 80-ton pressing capacity. It is often equipped with the CD 2000 CNC control system, providing 4-axis control (typically Y1, Y2, X, and R) for high accuracy in industrial applications. Key Technical Specifications Year 2010 Feature Standard HFT 8025 Press Force 80 Tons (800 kN) Bending Length 2,500 mm Stroke Length 200 mm Fpsdsyzy D Eopfx Acwsf Open Height 470 mm Throat Depth 420 mm Motor Power 7.5 kW

Condition: used, Year of construction: 2008, functionality: fully functional, Material: min 12 microns and up to 250 g/m2 Width: 430 mm Mechanical speed max:200 m/min Printing repeat: from 304.8 mm to 635 mm (12" to 25") Double side tape: 0.38 mm Fjdpfxsv Ah S Uo Acwjpf Flexographic plate thickness: 1.14 mm

Year of construction: 2022, condition: used, functionality: fully functional, We are selling two presses with a pressure capacity of 315 tons, as well as a single-screw extruder (the extruder comes with a new spare frequency converter). All items can be sold separately or as a package. Price available on request. Fpjdpeyzxf Isfx Acwof

Condition: good (used), Year of construction: 1995, power: 22 kW (29.91 HP), pressing force: 120 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,000 mm, table height: 950 mm, retraction force: 5 t, total length: 2,100 mm, total width: 2,050 mm, total height: 3,800 mm, control cabinet height: 1,900 mm, control cabinet length: 600 mm, control cabinet width: 500 mm, installation height: 900 mm, Equipment: safety light barrier, Deep drawing press, press power 120 to, stroke 400 mm, distance between tabels 900 mm, with oil cooler, light security bareer, dimension 2100x2050x3800 mm, weight ca. 13400 kgs Fsdpfx Ajycin Uscwjpf