Used Premelter for sale (72)

Condition: used, Year of construction: 2011, Premelter Robatech RobaPur 4 MOD Year: 2011 Description: Hjdpozat Hvjfx Aahep -PUR glue

Year of construction: 2006, condition: used, Premelter Nordson, Durapail Hedpfxjyzdt Re Aahjp Year: 2006 Description: -PUR glue

Condition: used, 2 units available. Please refer to the attached photos for more information. Hedpfx Aed Tmabjahjp

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variatio from cycle to cycle (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm Optional: Kolbus Turning Device WE 260 Hodpfozhwu Eox Aahjp year 2017

Condition: excellent (used), Year of construction: 2023, Biesse Akron 1330 A Edgebander Single-sided edgebander AKRON 1330-A Gluing Unit SP03 End trimming Unit IT03 Hedpfx Aasyyb Icohsp Fine trimming Unit RF02 Corner rounding Unit AR02 PRE-MILLING UNIT RT02 Symmetrical diamond tools H=45 mm Z=2+2 30° included. EDGE SCRAPER RB02 Tools are not included. GLUE SCRAPER UNIT RC02 BRUSHING UNIT SZ02 SUPPLEMENTARY LATERAL PANEL SUPPORT KIT FOR THE INSTALLATION OF THE PANEL RETURN SYSTEM MANUAL INFEED SYSTEM FOR NARROW PIECES KIT FOR PROCESSING "SHADOW LINE" PROFILE PANELS STRAIGHT AIR TABLE AT THE MACHINE INFEED ANTIADHESIVE UNIT ADZ02 PAIR DIAMOND-COATED MILLING CUTTERS H=65 mm Z=2+2 30°.In replacement of standard tools. HYBRID GLUING CHUCK FOR GRANULATED EVA/PUR GLUE INSTEAD OF THE STANDARD SYSTEM TM15 HYBRID PREMELTER FOR EVA/PUR GLUE ADAPTIVE INFRA RED LAMP AdIRL-700 AX-4, NC AXIS ON FINE TRIMMING UNIT PRO-NESTING KIT FOR FINE TRIMMING UNIT Pair of multiprofile milling cutters for fine trimming unit: chamfering 25 degrees, R=2 mm + R=1 mm, straight profile for solid wood AX-2, NC AXIS ON CORNER ROUNDING UNIT ROUNDING FUNCTION ONLY SLIDING UNIT FOR CORNER ROUNDING UNIT Pair of milling cutters, R=2 mm, for corner rounding unit Pair of milling cutters, R = 1 mm, for corner rounding unit AX-4, NC AXIS ON EDGE SCRAPER PRO-NESTING KIT FOR EDGE SCRAPER UNIT Pair of knives R=2 mm, for edge scraper Pair of knives R=1 mm, for edge scraper CLEANING UNIT LPT02 (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2001, Year: 2001 Size max 510 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3681 Description: - Chain tensioning station - 22 gathering stations - 20 gathering feeder 3681 - ASIR Automatic Signature Image - ASAC automatic self adjusting calliper - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book block feeder base with feeder - 1x 3643 Intermediate element with vibrating - Transfer into the binder Perfect binder Müller Martini Corona 3010 C15 S-31 Year: 2000 Description: - Semi automatic setting - Commander - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit Hsdpfx Aaezhukwehop - Base for 2nd spine glue system - PUR spine glue unit, interchangeable - Stream cover feeder - Scoring station - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 60 meters - Escape delivery Book block splitter Müller Martini 3501 Year: 2000 - Bypass belts - turn over belt Three knife trimmer Müller Martini 3672 Zenith Year: 2001 Description: - Semi automatic setting - Left hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Book stacker Müller Martini 3631 CB 16 Description: - Compensating stacker - Delivery to the left and right Condition Available immediately The machine is fully visible during operation

Condition: good (used), Year of construction: 1999, Built in 1999 Size max 510 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 12.000 c/h Consisting of: Gathering machine Müller Martini 3691 Description: - Chain tensioning station - 24 gathering stations - 24 gathering feeder 3691 - ASAC automatic self adjusting calliper - 1 Reject gate 3614 for incomplete products - 2x 3643 Intermediate element with vibrating - Transfer into the binder Perfect binder Müller Martini Corona 3010 C15 S-31 Year: 1999 Description: - Semi automatic setting - Commander - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Base for 2nd spine glue system - Cover feeder - Scoring station - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Trasportbelts aprox 20 meters - Escape delivery Three knife trimmer Müller Martini 251 Year: 1999 Description: - Left hand infeed - Integrated counter stacker 289 - Knife pre-setting device - Sets of knives: 2 Hedpfx Aszhtt Deahjp Book stacker Müller Martini 3631 CB 16 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2015, Perfect binding line Kolbus KM 600 - ZU 805 - FA 650 - HD 143.P - Kl 301 Year: 2015 Consisting of Gathering machine Kolbus ZU805 Year: 2015 Description: - Hand feeding station: 2 - Number of gathering stations: 24 - ATC thickness control - Optical sheet control - Air center: Becker - Set up element - Reject gate for incomplete products: AS 805 Perfect binder Kolbus KM 600 Year: 2015 Product counter: +/- 25,3 mio Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit - Base for side glue system - Hotmelt side glue unit, interchangeable - Pile cover feeder - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus Year: 2015 Description: - Transport system, length (approx): 45 mtr - Escape delivery - Conveyor tower Front cutter Kolbus FA 650 Year: 2015 Description: - TFT Touch screen - Straight infeed - Throughfeed - Belt delivery Three knife trimmer Kolbus HD 143.P Year: 2015 Description: - Co-Pilot with touchscreen Hodpfx Aaozf Izqohop - Infeed conveyor from the right - Automatic hopper feeder for inline production - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 18 Book stacker Kolbus KL 301 Year: 2015 Description: - Semi automatic setting - Compensating stacker - Delivery to the left and right

Condition: used, Year of construction: 2009, Perfect binding line Müller Martini Corona C15 S/35 (18") Year: 2009 Consisting of Gathering machine Müller Martini 3681 Description: - Chain tensioning station Hjdpfxjxdx Tne Aahsp - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - Stream feeders: 3738 - 10x (yr 08 06 & 03) - Bundle clamp: Gramatec CL 200 (yr 23) - Bundle clamp: Gramatec CL 200 (yr 23) - Gantry system: Pfaff (yr 23) - Pump - Set up element: 3641 - Reject gate for incomplete products: 3714 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C15 S/35 (18") Year: 2009 Description: - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - 2nd premelter for spine glue unit: ICS C160 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: CLS 30 - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini CB 16 (3631) Description: - Compensating stacker - Delivery to the left and right

Condition: good (used), Year of construction: 1993, Year: 1993 Consisting of: Gathering machine Müller Martini 210 S Description: - Chain tensioning station - Number of gathering stations: 18 - Pump - Set up element - Intermediate element with vibrating Side stitching unit - Transfer into the binder Perfect binder Müller Martini Normbinder Description: - 20 clamps - Main milling station - 1st spine preparation station - Excluding dust extraction system - Base for 1st spine glue system Hsdpfszg Hdyjx Aahjp - hotmelt spine glue unit, interchangeable - Premelter for spine glue unit - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - SF Stream cover feeder - Scoring station - Pump - SF Nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Semi automatic setting - Right hand infeed - Precounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Option not in price included - Stream feeders - book bloc feeder - Gauzing station - Palletizer

Condition: good (used), Year of construction: 2001, Year: 2000/2013 Since rebuilding by Müller Martin only 5.600 Consisting of: Gathering machine Müller Martini 3681 Description: - Chain tensioning station - Number of gathering stations: 8 - ASIR Automatic Signature Image Recognition - ASAC automatic self adjusting calliper - Pump - Set up element: 3641 - Reject gate for incomplete products:3617 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C18-41 Hsdpfxezg E Ide Aahop Year: 2001/2014 Description: - 31 clamps - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine has centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2st spine glue system - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device - Quako-quality control New in 2013 Transport system New in 2013 - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Semi automatic setting - Left hand infeed - Precounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 Book stacker Müller Martini CB 12 Description: - Compensating stacker - Delivery to the left Option not in price included - Stream feeders - Müller Martin 3605 book block saw with turnoverbelt - Palletizer

Condition: good (used), Year of construction: 2000, Consisting of: Gathering machine Müller Martini 3695 Description: - Chain tensioning station Hedpfszg E Evsx Aahjp - Number of gathering stations: 18 - ASIR Automatic Signature Image Recognition - ASAC automatic self adjusting calliper - Pump - Set up element: 3641 - Reject gate for incomplete products:3614 - Intermediate element with vibrating: 3643 - 2x - Transfer into the binder Perfect binder Müller Martini Corona C12-31 Year: 2000 Description: - 31 clamps - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine has centralised dust extraction system - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for 2st spine glue system - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Stream cover feeder - Scoring station - Pump - Nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system - Escape delivery Three knife trimmer Müller Martini Zenith S (3672) Description: - Semi automatic setting - Right hand infeed - Precounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 – 17 - 3620 shingle device Book stacker Müller Martini CB 16 (3631) Description: - Compensating stacker - Delivery to the left and right Option not in price included - Stream feeders - Universo criss-cross delivery - book bloc feeder - Gauzing station - Palletizer

Condition: like new (used), functionality: fully functional, input voltage: 400 V, overall weight: 80 kg, input current: 11 A, Condition: Practically NEW – only used as a demonstration machine (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive applications. MOD Technology (Melt-on-Demand): Only melts the required amount of adhesive – prevents PUR glue from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing) Hsdpfxjy D Hfzo Aahop Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Maximum Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection Class: IP32 The unit is fully functional, exceptionally clean, and ready for immediate use. Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Search terms / Suitable for equipment from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, premelter, profile wrapping.

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting Hjdpok H Sfhsfx Aahjp - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: - Compensating stacker - Turning device - Delivery to the right

Year of construction: 2021, condition: used, MULLER MARTINI Casing-In Machine EMP 513 type K317 year 2021 For casing-in of flat spine book blocks into hard covers, as well as subsequent pressing and joint-forming of books. To be used as an individual machine. Configuration: copilot system with 2 touch screens block supply via feeding conveyor and star feeder case prestacking conveyor case magazine case bending machine case forming station casing-in gluing station with profile rollers and adjustable double glue application for the book joint area glue circulation system with pump EMP glue pump monitoring unit rubbing down unit and thin book device electronically heated 15° joint forming rails, controlled in pairs via regulator Hodpsyr Hk Sjfx Aahop quick-change system for joint forming rails 2 pressing stations heater monitoring unit servo-controlled drive technology based on Siemens SIMOTION D delivery to the left, transport of books lying flat Special equipment: photo book block splitter hotmelt nozzle gluing unit for joint gluing NORDSON premelter Code-Matching (comparison) between book block and case via data matrix code, barcode sensor: Cognex camera double case control special equipment for the processing of flexible cases Technical specifications: mechanical speed: up to 30 cycles/min size range book block max.: 280 x 375 x 80 mm size range book block max.: 305 x 375 x 30 mm size range book block min.: 100 x 100 x 2 mm size range opened case max.: 660 x 385 mm size range opened case min.: 210 x 105 mm thickness opened case max.: 7,0 mm thickness opened case min.: 0,1 mm size range finished book max.: 285 x 385 x 90 mm size range finished book max.: 315 x 385 x 30 mm size range finished book min.: 105 x 105 x 6 mm KOLBUS Transport Conveyor System year 2021

Condition: excellent (used), Year of construction: 2009, Perfect Binding Line, consisting of: Gathering Machine ZU 841.A - basic frame with 21 gathering stations - 19 standard feeders - 1 handfeeding station (covering 2 housing stations) - device for electrostatic fixation of three advertising medias - integrated jogging station - Aircenter - reject unit AS 841 to the right Hsdpfx Aovg Ad Teahep - transfer channel as connecting unit to the binder Perfectbinder KM 473 - 26 clamps - handfeeding - main milling station - equalized milling station - notching station - micro-notching station - brushing station with roller brush - 2 Hotmelt spine gluing units - 1 Hotmelt side gluing unit - 3 premelters LH 375 - IR heating at curve - stream cover feeder SAL 411.A - scoring station for 4 scores - 2 pressing stations - gripper carriage delivery - laydown device Transport and Drying Line, incl. Ambaflex drying tower, incl. emergency delivery Three Knife Trimmer HD 153.P - copilot - right hand infeed - counter stacker - silicon spraying device - standard cutting cassettes 7 - 18 additionally available: Kolbus book block feeder with delivery belt Kolbus card gluer KK 841 PUR spine gluing unit with Nordson smelting unit Best for PUR cover 600L Kolbus destacker AE 360 Kolbus blocking unit VB 120 pallettizer Kolbus PL 770 or Kolbus PL 771

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, Equipment: CE marking, IMA BIMA 410 V CNC WORKING CENTRE FOR BORING + ROUTING + EDGE BANDING • Industrial machine with heavy-duty structure • Working area: X:4000 mm Y:1200 mm Z: 100 mm • Travel speed: X:100 m/min Y:80 m/min Z: 25 m/min • 2 Working areas • 8 movable work tables to support the panels. SCHMALZ system • 23 SCHMALZ suction cups with vacuum system for the locking of the working piece • 4 loading device through pneumatic bars assembled on the work tables that lift the pieces • 1 SIEMENS vacuum pump ROUTING UNIT: • 10 HP. Refrigerated router head • Automatic change of the tool • Tool holders: HSK F-63 • C AXIS that allows to turn and 360° angle drive heads with rotation regulation in automatic by numerical control • 0 to 20.000 rpm • Tool magazine 12 positions Hjdszc E A Ispfx Aahep MULTI-BORING UNIT: • 7 independent spindles for vertical boring in X direction • 5 independent spindles for vertical boring in Y direction • High revolution speed: 9.000 rpm EDGE BANDING UNIT: • Automatic device to apply the edge into straight profiles of shaped panels • Applicable banding material in coils: thin edge and PVC up to 3 mm • Independent unit to edge band shaped panels. It's installed on the main frame of the machine - hot-melt glue pot and premelter - spreading roller to regulate the quantity of apllied glue - edge pression roller • Lamp zone to pre-heat the side of the panel • Multiple magazine for edge coils with 2 positions, to automatically change the edge type • Top and bottom edge trimming head-unit • Top and bottom edge scraping head-unit CONTROL OF THE MACHINE: • IMATRONIC • Software IMAWOP • Command board installed on a separated electrical cabinet to control the machine PROTECTION ENCLOSURE OF THE WORKING UNITS PROTECTION FENCES SECURITY CARPETS SECURITY NORME CE MARK

Condition: good (used), Year of construction: 1998, functionality: fully functional, Stefani Ibimatic Double Edge Bander Year 1998 S/N NH 002993 Manufacture StefaniS.p.A. Italy Edge banding min / max 14-65mm Thickness min 0,3mm Max size of ABS 3 x 35mm Panel thickness min/ max 60mm Panel size 220- 3200mm Working edge 30-75mm Distance between the edges 400mm Adjustable feed speed from 6 to 36 m/min Units: 1+1 front milling units, 4 kW, pneumatic Hodpfxstrgy Ne Aahep 1+1 air blast for cleaning the workpieces 1+1 gluing station / hot melt adhesive unit GR_HMP-P HM-P GLUING UNIT FOR STRAIGHT EDGES The device is designed for gluing straight edges using a thermo-meltable adhesive with a removable container container and a premelter for quick melting The unit includes A Glue container B Strip storage table C Pneumatic device box D Support base for strip storage E Guillotine shears F Side pusher G Inclination of the glue unit H Mobile table top 1+1 feeding device for edge trims, 5 stations 1+1 head cutting unit, 0.35 kW, 12,000 rpm 1+1 equalizing unit, 1 kW, 12,000 rpm 1+1 chamfer trimming unit, 0.5 kW, 12,000 rpm R14/R25, diameter 80 mm, 12,000 rpm 1+1 head rounding unit with two 0.35 kW motors 1+1 milling unit, 4 kW, right side, left side empty space ( U28+U55), diameter 125mm- RPM 12,000 1+1 Self-adjusting scraper RCA 95 1+1 Brush / buffing unit 0,29 kW, 1500 rpm SPO ( 150/50x 50mm ) 1+1 ABS strip color brightener, 1600 W

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus Hsdpsy Uvfrefx Aahep - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Condition: good (used), Year: 2014 Size max 360 x 310 mm min 140 x 100 mm Book block thickness max 60 mm min 3 mm Cover size max 642 mm min 203 mm Speed max 15.000 c/h Consisting of: Gathering machine Müller Martini 3697 Description: - air pump - blower - Chain tensioning station - Number of gathering stations: 12 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - 10 Stream feeders 3741 - 3 Bundle clamp: Müller Martini Bundle clamps - 1 Reject gate 3717 for incomplete products - 2x 3643 Intermediate element with vibrating - 1x 3642 Book Block feeder base - Transfer into the binder Perfect binder Müller Martini Corona C15 S/36 (18") Year: 2014 Description: - Book Data Center BDC - Semi automatic setting - Commander with touch screen - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Base for 1st spine glue system - 1st hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: Robatech MOD - Stream cover feeder - Scoring station - Nipping and pressing station - 2nd nipping and pressing station Hsdpfszbux Nox Aahsp - Lay down device Transport system - Trasportbelts aprox 70 meters - Escape delivery Three knife trimmer Müller Martini 3675 Orbit Description: - Colour monitor with touchscreen - Semi automatic setting - Right hand infeed - Integratedcounter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4 - 17 Book stacker Müller Martini 3632 CB 18 Description: - Compensating stacker - Delivery to the left and right Pile tacking device Müller Martini 457 Option: - 2 Card gluer

Condition: excellent (used), Year of construction: 2004, Perfecta Bookline S Age: 2004 Counter: 65.000 Books Size: 45 x 27 cm Speed: up to 1800 books/ hour • 5 clamps • hand-feeding station with jogger • spine preparation with exhauster • hotmelt spine and side glue Hodpfx Aajv T I R Sjhop • premelter • coverfeeder (toploading), with scoring • Compressor Available immediately

Condition: used, Year of construction: 2008, Perfect binding line Müller Martini Pantera (1577) Year: 2008-2000 - 1991 Consisting of Gathering machine Müller Martini 1571 Year: 2000 Description: - Hand feeding station - Number of gathering stations: 12 - ASAC automatic self adjusting calliper - Excluding pump(s) - Set up element - Transfer into the binder Perfect binder Müller Martini Pantera (1577) Year: 2008 Description: - Colour monitor with touch screen - Hand feeding - Number of clamps: 12 - Milling and roughening station - Dust extraction system - PUR spine gluing unit - PUR premelter for PUR spine glue unit: MOD 30 POT (2007) - Hotmelt side glue - Premelter for side glue unit: Nordson Durablue 4 - Gauzing station - Drum cover feeder - Scoring station - Nipping and pressing station - Lay down device Transport system Three knife trimmer Wohlenberg 44 FS 50 Year: 1991 - Right hand infeed - Automatic hopper feeder for inline production Hsdsy R Ty Eepfx Aahsp - Knife pre-setting device - Belt delivery

Condition: used, Year of construction: 2014, Glue unit Meler PUR Year: 2014 Suitable for connection with, Kolbus KM 473 Hedpfxouliqys Aahsp PUR spine glue unit Premelter for spine glue unit

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Hjdpoy Rlbnefx Aahjp Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Hjdpfx Aoxuad Asahop Year: 2011 Description: - Compensating stacker - Delivery to the left and right Optional availabe: (not included in pricing) Kolbus card Gluer - KK 841 - 2011 Kolbus cold glue spine glue unit - 2011 Description updated: 9-4-2026