Used Power Press for sale (48,239)

Condition: good (used), Year of construction: 2011, operating hours: 23,130 h, functionality: fully functional, Baling press Macpresse MAC 105, pressing force 70 t, year of manufacture 2011 Technical data: Gbjdjz I Ra Eopfx Akyeu Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of manufacture: 2011 Operating hours: 23,130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Feed opening: 1500 x 750 mm Press chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Tying: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Hopper Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refers to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, prior sale is reserved, and it can be revoked at any time. Inspections are possible by arrangement. The sale is made with advance payment, ex works, without warranty.

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), PRICE REDUCTION!!!! Like-new combined heat and power (CHP) units – 2 × WOLF Power Systems – 140 kW electrical each – unused For sale are two like-new CHP units from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or put into operation and are therefore in technically unused condition. Since delivery approximately 5 years ago, they have been stored in a dry and protected environment. Technical specifications: Manufacturer: WOLF Power Systems Gbedpfx Aksyt Emnoyeu Electrical output: 140 kW per unit Condition: unused / like new Storage: dry, professionally stored Availability: immediate The current new price is approximately €220,000 net per unit. This represents a very rare opportunity to acquire high-quality CHP technology at a significantly reduced price compared to the new price – ideal for commercial use, district heating projects, agriculture, or energy contracting. Inspection possible by arrangement. Asking price is half the new price; please submit your offer!

Condition: used, High-pressure hydraulic power unit up to 630 bar, WEBER Type E45 / 59600.0 High-pressure unit + hydraulic spreader Year of manufacture 1988 / 1986 Hydraulic power unit, Type E45 / 59600.0 Operating pressure max. 630 bar Flow rate approx. 2 l/min Tank capacity approx. 10 liters Spreader – jaws, WEBER Type SP30 / 59 198.0 Outreach = arm length 340 mm Spreading distance max. 610 mm Spreading force in the working area max. 132 kN Closing force 99 kN - Double hose with plug-in connection Rated power 0.9 kW Mains connection 220 volts, 50 Hz Weight of hydraulic power unit approx. 40 kg Weight of spreader approx. 25 kg Very good condition Gbsdpfodzp S Rjx Akyou Hydraulic fire and rescue set with hydraulic power unit and a spreader. The spreader is used to create rescue openings after traffic accidents by spreading apart. It can also be used to compress or lift loads. Versatile due to the multifunctional spreader jaws made of die-forged and hardened steel.

Condition: good (used), Year of construction: 2006, functionality: fully functional, operating hours: 21,495 h, AMADA HFT 50-20 – technical specifications Parameter Value Manufacturer AMADA Model HFT 50-20 Machine Type CNC hydraulic press brake Gbjdpfx Aksz N Smkeysu Year of Manufacture 2006 Number of Operating Hours 21,495 hours Pressing Force 500 kN / 50 tons Working Bending Length 2,000 mm Distance Between Uprights approx. 1,660 mm Ram Stroke approx. 200 mm Maximum Opening approx. 470 mm Upright Overhang approx. 400 mm Approach Speed approx. 100 mm/s Working Speed approx. 10 mm/s Return Speed approx. 100 mm/s Motor Power approx. 5.5 kW Machine Weight approx. 4,800 kg CNC Control Specific version needs to be verified Back Gauge CNC-controlled, configuration depending on equipment The stated dimensions, speeds, power consumption, and weight are approximate and may vary depending on the configuration. Accessories – set of bending tools The machine includes a set of bending tools with the following radii: R1.0 R1.5 R2.0 R2.5 R3.0 R5.0 R10 R20

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 36,167 h, control type: CNC control, laser type: fiber laser, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 4,000 mm, table width: 2,000 mm, workpiece weight (max.): 1,850 kg, type of cooling: water, overall weight: 110,000 kg, total length: 12,600 mm, total width: 1,080 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, Prima Power Laser Genius LGf 2040 – 4 kW – Year 2019 For sale: Prima Power Laser Genius LGf 2040, a high-performance fiber laser cutting machine manufactured in 2019, with a laser power of 4,000 W and a working format of 4,000 × 2,000 mm. This Italian-made machine is equipped with linear motor technology, providing high travel speeds, excellent dynamics, and high precision. The Laser Genius series is designed for intensive industrial production and cutting of carbon steel, stainless steel, aluminum, copper, and other metals. Key technical data: Gbedpfjzz N Dfsx Akyju Manufacturer: Prima Power / Prima Industrie S.p.A. Model: Laser Genius LGf 2040 Year of manufacture: 2019 Serial number: Z3.03.02.09 Technology: Fiber laser Laser power: 4,000 W / 4 kW Working area: 4,064 × 2,032 mm Z-axis stroke: 150 mm Maximum X/Y speed: 200 m/min Maximum simultaneous speed: 240 m/min Positioning accuracy: 0.03 mm Repeatability: 0.03 mm X/Y drive via linear motors Automatic table exchange system Approximate machine weight: 11,000 kg Approximate maximum cutting capacities with 4 kW: Carbon steel: up to 20 mm Stainless steel: up to 15 mm Aluminum: up to 8 mm Copper: up to 8 mm The machine stands out for its large format of 2,000 × 4,000 mm, high dynamics, and precision, making it a particularly suitable solution for industrial sheet metal production. Machine available for inspection. More information, photographs, operating hours, and additional equipment are available upon request.

Condition: good (used), Code: 0479 Brand: SIPA Model: S20F Hydraulic cold press for panels, doors, furniture, timber, composite materials, engineering materials, plastics, aluminium and other materials Steel frame Platen dimensions 2500 x 1300 mm Platens opening 500 mm Total pressure 20 t Gbsdpfsz Atwrox Akyou N° 2 cylinders diameter 40 mm Motor power 1,5 Hp Overall dimensions mm 2800 x 1300 x 2110 h Weight kg 740

Condition: used, mileage: 167,307 km, power: 257 kW (349.42 HP), first registration: 07/2006, fuel type: diesel, empty load weight: 15,850 kg, maximum load weight: 10,150 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 9,670 mm, total width: 2,500 mm, total height: 3,550 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, Vehicle location: Bovenden, license plate house, 1x air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, radio, cruise control, ABS (anti-lock braking system), constant throttle, raised exhaust, automatic, lifting+lowering, central lubrication system, differential lock, fog lights, rotating beacon, leaf-air suspension, low-noise G1, last axle forced steering, environmental badge green Wheelbase: 4200 mm Body: FAUN POWER PRESS 524 , WAAGE SYWATEC scales Sywatec weighing range 200kg-12000kg, reversing camera Vehicle is without engine!!! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Gedevhhgvopfx Akyebu - .

Condition: good (used), Year of construction: 2018, CNC press brake Manufacturer: SMD Yawei Type: PBB-630/6200 Year of manufacture: 2018 CNC control: CYBELEC ModEva 15 Press force: 6,300 kN Working width: approx. 6,200 mm DSP laser system Connected power: 400 V / 95 kVA Gbsdpfx Aorivu Sokysu 121026

Condition: good (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: 2020130, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut, laser type: fiber laser, laser source manufacturer: IPG, laser power: 2,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, working length: 6,000 mm, travel distance X-axis: 6,050 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 150 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, cutting speed: 13,000 mm/min, positioning speed: 80 m/min, positioning accuracy: 0.05 mm, repeat accuracy: 0.03 mm, power: 26.5 kW (36.03 HP), input voltage: 400 V, input frequency: 50 Hz, overall weight: 5,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, CYPCUT - CYPTUBE, auto-center positioning, pneumatic clamping, automatic alignment device, automatic clamping device, cutting head incl. protective glass, Raytool / SWISS, laser source - IPG / Germany, software for 3D tube and profile cutting, automatic loading system for tubes and profiles, extraction unit Filtercube 2H, 4 kW, 50 m² Gbedey Efbkopfx Akyeu

Condition: good (used), Code: 0478 Brand: ITALPRESSE Model: V/2 Mechanical press for cold gluing Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2200 x 1000 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2550 x 1000 x 1650 h Gjdpfszz Szaex Akyjbu Weight kg 750

Condition: excellent (used), Year of construction: 2008, power: 42 kW (57.10 HP), pressing force: 320 t, stroke length: 4,000 mm, operating speed: 14 mm/s, reverse speed: 130 mm/s, throat depth: 400 mm, clearance between the columns: 3,150 mm, total length: 5,800 mm, total width: 2,300 mm, total height: 3,800 mm, overall weight: 23,000 kg, Make: LVD Type: PPEB-EFL 320/40 Control: CADMAN YOP: 2008 CNC Crowning Hydraulic tool clamping EFL Easy form laser measuring & correction system Set Tooling  Laser guide protection Controlled axis Y1/Y2/X/R/V-Axis Gjdpez Rmp Nofx Akyebu Max. bending length: 4000mm Distance between column: 3150mm Max. pressing force: 320T Dis. Beam - Table: 570mm Beam stroke: 300mm Table Width: 200mm Troth beam: 400mm Approch speed: 120mm/min. Working speed: 14mm/min. Return speed: 130mm/min. Adjustment X-Axis back gauge:1000mm Control: CADMAN Power: 42kW Length: 5800mm Width: 2300mm Height: 3800mm Weight: 23000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2005, functionality: fully functional, Clamping force: 4,900 kN Operating pressure: 206 bar Heating plate dimensions: 700 x 700 mm Piston diameter: 558.8 mm Stroke: 250 mm Daylight opening: 300 mm Godpfxoz N E A Ej Akyebu Max. weight of the heating plates: 560 kg Oil tank: 1,100 L Rated power: 82 kW Heating power: 56 kW Vacuum motor power: 4.0 kW Light curtain, distance to the tool area: 810 mm Stroke of the vacuum cover: 200 mm Machine dimensions: 3,975 x 2,935 x 2,555 mm Equipped with an overhead crane (monorail) with three chain hoists Manufacturer: STAHL Year of manufacture: 2011 Lifting capacity: 3 x 400 kg Length of the overhead crane: approx. 3,500 mm Mobile carriage Lifting capacity: 400 kg Lifting height: 3,000 mm Lifting speed, main lift: 4 m/min Lifting speed, fine lift: 1 m/min The vulcanizing press from the manufacturer PAN STONE was used by a renowned German company in the sealing technology sector. This company is known for its high quality and innovation in sealing production. It has always been professionally maintained and is in good condition.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 113 kg, total width: 840 mm, total length: 1,620 mm, total height: 920 mm, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS12288 log splitter from HZC Power impresses with a splitting force of 12 tons and a maximum splitting length of 530 mm. The 6.5 hp petrol engine ensures sufficient power and efficient work, while the splitting cycle of just 11 seconds guarantees fast wood processing. The device works in a horizontal position and is equipped with a fixed splitting wedge/splitting cross, which presses the wood against the wedge via the cylinder. The two-handed operation ensures additional safety. The log splitter is easy to transport thanks to the trailer coupling. General data: Manufacturer: HZC Power Model: HS12288 Splitting force: 12 t Maximum splitting length: 530 mm Splitting cycle: 11 s Oil pressure: 270 bar Hydraulic oil capacity: 10 l (HLP46) Product weight: 113 kg Shipping weight: 140 kg Dimensions assembled (LxWxH): 162 cm x 84 cm x 92 cm Dimensions with packaging (LxWxH): 110 cm x 54 cm x 80 cm Special features: Splitting wedge: 15 cm x 20 cm (LxW) Trailer coupling: For easy transportation Working position: Horizontal Operation: 2-hand safety control Splitting wedge/splitting cross: Permanently mounted, wood is pressed against the splitting wedge via the cylinder Motor: Manufacturer: Jiao Model: 6.5 HP / 208 cc Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV (overhead valves) Displacement: 208 cc Cylinder: Cylinder with cast iron sleeve Bore: 68.3 mm Stroke: 55.9 mm Fuel tank capacity: 3.1 l Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (WxLxH): 321 x 376 x 346 mm These details summarize the most important technical specifications and equipment features of the HS12288 log splitter from HZC Power. Splitting force: 12 t - For effortless splitting of wood up to 530 mm in length and a maximum diameter of 50 cm. Cable starter: Easy engine start, even in cold temperatures. Splitting wedge/splitting cross: Permanently mounted, ensures effective splitting without constant readjustment. Hydraulic system: Powerful system with 270 bar oil pressure, ensures high efficiency and durability. Working position: Horizontal - allows you to work comfortably while lying down. Two-hand operation: For maximum safety when operating the log splitter. Oil filter: Integrated oil filter for a longer service life of the appliance. Trailer coupling: For easy transportation on private land, but without road approval. Robust frame: Sturdy frame ensures that the split material is held securely during the splitting process. Compact dimensions: With a width of 84 cm, the splitter can be easily transported on a trailer. Gjdpfxewaluto Akysbu Engine: 6.5 hp petrol engine with 208 cc displacement for powerful splitting. Integrated table surface: Provides additional space for storing pieces of wood while working.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, input voltage: 400 V, fuel: diesel, continuous power (apparent): 140 kVA, input frequency: 50 Hz, Emergency generator set Gjdjznh Rkspfx Akyjbu Year of manufacture: 2024 – fully functional.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 100 h, control type: manual, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: ABB, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, compressed air connection: 8 bar, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, High Pressure Unit 90PW3 for Sale Model: 90PW3 (explosion-proof motor) Manufacturer: Power (Tianjin) Technology Co. Key Technical Specifications - Maximum pressure: 140 MPa (extendable to 276 MPa by changing the hydraulic head) - Rated flow: 30 L/min - Rated power: 90 kW - Transmission ratio: 2.75:1 - Rated speed: 530 RPM - Plunger diameter: 18 mm - Dimensions: 2000 × 1200 × 800 mm - Weight: 1200 kg Main Components Included - 90PW3 high-pressure triplex pump - Explosion-proof motor - Flexible pin coupling - Booster centrifugal pump (feed) - Bag filter + Y-strainer - Pneumatic valve (automatic opening at 55 MPa) - Control panel with indicators - ABB soft starter - Water storage tank with level control (IFM sensor), PLC-controllable pneumatic intake valves Gbsdpfx Ajyxy D Tokysu Technical Advantages - Forced lubrication – prevents overheating due to friction - "Super simple" maintenance: quick removal of packing and valves

Condition: good (used), Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Gbodpfx Aksxmhcdjyou Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Gbsdpfx Ajwv U N Sskyeu Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Year of construction: 2026, condition: new, Belt presses POWERPRESS 800 are designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders.The obtained juice flows in the collection trays under the belt presses. Pressing is continuous. Capacity: 800 kg/h The most evolutionary feature of our belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the machine filtrates the juice even during the pressing stage providing cleaner and more pure product. Entirely made of stainless steel. Has adjustable feet. The belt presses function automatically. When the tank of the mass is full, all other machines which come before belt press turn off automatically. When the juice tank is full, juice pump pumps the juice into the tanks. Includes High pressure washer. Has an integrated pump. Belt tension is adjustable. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. The cleaning of the belt is automatic with high pressure cleaner, scraper and brush. Pneumatic lifting of the security cover of the press ensures easier access when cleaning. Godpfxohu Ab Do Akyebu

Condition: excellent (used), Year of construction: 2014, Total power: 55 kW Power supply: 400 V / 50 Hz Maximum operating pressure: 8 bar Motor speed: 3,500 rpm Weight: 1,300 kg. Gbodpfx Aezy Hrkskyeu

Condition: good (used), functionality: fully functional, Year of construction: 2022, machine/vehicle number: TA-F203494, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FSCUT, controller model: FSCUT8000, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus12000, laser power: 12,000 W, laser wavelength: 1,070 nm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, sheet thickness stainless steel (max.): 40 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 20 mm, working length: 3,050 mm, working width: 1,520 mm, feed rate X-axis: 120 m/min, feed rate Y-axis: 120 m/min, cutting speed: 85,000 mm/min, positioning accuracy: 0.02 mm, repeat accuracy: 0.03 mm, workpiece weight (max.): 1,500 kg, power: 63 kW (85.66 HP), input voltage: 400 V, input frequency: 50 Hz, type of cooling: water, overall weight: 10,000 kg, Equipment: documentation/manual, dust extraction, fume extraction, Precitec Procutter 2.0 laser head Autofocus height control system Hörbiger laser gas system Godpfx Aksy Ed S Ieyobu 2 CCD cameras Teka extraction unit ECO-Cube

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Gbsdpfx Aswqcbfjkysu Powered by air- 6 bar Measurments: by client demands

Condition: good (used), functionality: fully functional, Year of construction: 2018, Travel ranges: X/Y/Z: 3,048 x 1,524 x 150 mm Laser: CV-5000 (CO²) Operating hours: approx. 9,000 h Cutting head with lens: 5´ / 7.5´ / 9´ Control system: Prima Power NC Expressw e³ Laser Classic Pallet changer: Prima Power/OMS Sordella, max. 3,300 kg Godpfx Akozbxn Ueysbu Extraction system: Donaldson 2DFP4-SPRK, 2,400 m³/h Cooling system: Hyfra Sigma 67-S Equipment: Sheet metal recognition, oil mist lubrication system, plasma monitoring, laser piercing monitor (LPM), pallet changer with light barriers, machine enclosure.

Condition: used, Schüttelautomat Rüttler mit Ausstreichwalze, mit Edelstahloberfläche Verstellbare Schüttelintensität Geschwindigkeit der Anpresswalze stufenlos anpassbar, Neigbar nach links und rechts, Automatic Jogger with Press Rollers Baumann BSB 3 L The table of the automatic jogger is designed as with a stainless steel air-table Tiltable both left and Right, Variable jogging intensity Schüttelautomat Rüttler mit Ausstreichwalze / Automatic Jogger with Press Rollers Baumann BSB 3 L Baujahr / Year 2005 - Serial-No. 212.123 Bogenformat / Sheet Size max. 800 x 1150mm Lagenhöhe / Ream height max. 160mm CE-Zeichen-Zulassung / CE Certificate Elektr. Anschluss / Power supply 3 Phase 400V - 50 Hz Gsdez Rnpqspfx Akyobu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Gbedpfjcmat Uox Akyeu the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels Gbjdpfjxv A N Rsx Akyou 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.