Used Positioning for sale (8,123)

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: D 2402263, overall weight: 176 kg, total length: 930 mm, total width: 550 mm, total height: 450 mm, volume flow: 129 m³/h, operating pressure: 1,500 bar, power: 6.7 kW (9.11 HP), input frequency: 50 Hz, rotational speed (max.): 1,740 rpm, Dry-running positive displacement pump for low pressure, from Becker, type KDT 3.140/0-400, built in 2009. Rbedetp Tklepfx Ahzjt The rotary vane compressor uses self-lubricating vanes made of a graphite composite material and requires only minimal maintenance and no oil change. For further details see type plates / files. Packaging and loading included.

Condition: like new (used), Year of construction: 2010, functionality: unexamined, overall weight: 3,200 kg, 5-axis rotary table with KUKA servo motors Rbsdoqy Hnpepfx Ahzet

Condition: new, - External dimensions (LxWxH): 450x896x732 mm - Operating range: +5 ÷ -2°C - Evaporation temperature: -10°C - Condensing temperature: +40°C - Ambient temperature: 32°C - Defrosting: Hot gas - Power supply: 230 V / 1+N phase / 50 Hz - Maximum absorbed current: 6.6 A - Maximum absorbed power: 1.2 kW - Nominal absorbed power: 73 W - Refrigerant gas: R452A - Capacity: 1032 W - Nominal power: 0.5 HP - Compressor type: E - Fin spacing: 2.5 mm - Fans: 1 x ø254 mm - Airflow rate: 750 m³/h - Air throw: 3 m - Weight: 45 kg - Volume: 0.49 m³ - Hermetic compressor - Air-cooled condenser - Galvanized steel housing - Automatic reset high and low pressure switch - Axial fan - Hot gas defrost solenoid valve - Condensate drain trap - Condensate drain heater (only for BT models) - Ambient temperature probe - Defrost end probe - Condensing control probe - Power cable for door heater - Micro-door connection cable - Digital display with temperature indication - Operating status display: - Cooling/Defrost Ibodjxvr T Ejcvyqi Aod - Evaporator fans Rsdsxvr T Espfx Ahzebt - Alarm active - Manual defrost button - Audible alarm - High and low temperature alarm - High condenser temperature (dirty condenser) alarm - Low condenser temperature alarm - Door open alarm - High and low pressure alarm - Defrost time exceeded alarm - Faulty temperature probe alarm - Condensing control probe failure alarm - Evaporation temperature at -10°C for MT - Condensing temperature at +40°C for MT - Evaporation temperature at -30°C for LT - Condensing temperature at +40°C for LT

Year of construction: 2013, condition: used, Rotary Indexing Table Rotary Table Rotary Drive Welding Positioner Positioning Table WEISS Rodpfx Aexdv N Hshzjbt TYPE: CR700 CAA Year: 2013 Rotary indexing table/positioning table with control cabinet including frequency inverter and PILZ PLC control. Diameter of mounting plate approx.: 700 mm Diameter of inner collar approx.: 320 mm Height without base approx.: 290/320 mm Base diameter approx.: 1600 mm Base height approx.: 190 mm Max. dynamic axial force: 70,000 N Weight approx. 585 kg plus base There are 4 pieces of these rotary drives from Weiss available. For further details or purchase of multiple rotary drives: Please enquire.

Condition: new, Linear guide, THK, THK Guide, THK Rail, Used machine Manufacturer: THK Type: SSR Rbedpfx Aerby Hcshzst 10056 10107 53900 SSR30XW2SSc1+5520Lt Cross-section: 28 x 23 mm Length: 5520 mm In stock: multiple units Guide slider (roller carriage) 2 pieces

Condition: used, Turntable, 180° indexing table, rotary table with base made from aluminium system profiles Positioning table, rotary indexing table, 180° Rbsdpfx Ahexf Uudezet BOSCH REXROTH aluminium system profile Rotary plate diameter under the assembly: Ø 220 mm Rotary plate base plate made of steel (L x W x H): 760 x 760 x 20 mm Build height (rotary plate only): 70 mm (from base plate to top of rotary plate) Aluminium frame profile: 60 x 90 mm - Very stably mounted rotary table, manually rotatable - Rotary plate with position query via electric position switch for 1 position - 2 manual index locking positions with release lever, with end stop damper - Electromechanical position locking - Superstructure made of aluminium (painted orange) - Stable base made of aluminium system profile - Height-adjustable feet for leveling Frame dimensions (L x W x H): 760 x 760 x 800 mm Space requirement (L x W x H): 1000 x 950 x 1560 mm Weight: 335 kg Good condition

Condition: good (used), Year of construction: 2012, Matec 30 L, Year of manufacture 2012, Heidenhain iTNC 530 control, Redpfow Uf Izex Ahzebt X/Y/Z travel 1300/600/700 mm, Spindle speed up to 12,000 rpm, HSK 63-A spindle mount, Electric handwheel, 20 bar internal coolant supply, Paper belt filter, 80-way water coolant supply, Fully enclosed work area, Direct measuring systems, Chip conveyor, Bellows with steel blades, 3D measuring probe, Laser measuring device

Condition: used, Manufacturer: ABB Type: MTD 750 Technical data: see illustration. Rbodpfxsxcu A Ae Ahzjt

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Technical Data Summary (No Marketing Spiel): This is a used automatic in-line Solder Paste Printer, Model P4034 from Shenzhen ETA Technology Co., Ltd, manufactured in 2018. The machine is in excellent functional condition. Key Performance Parameters: ● Repeat positioning accuracy: ±0.01mm. ● Printing accuracy: ±0.025mm. Rsdpfsxm S N Usx Ahzjbt ● Max PCB size: 400×340mm. ● Min PCB size: 50×50mm. ● Max Stencil Frame size: 737×737mm. ● Cycle time (excluding print/clean):

Condition: used, Attention -- Two types available Type: 1FK6044-7AH71-1EG0 Type: 1FK7044-7AH71-1EG0 Ball screw with SIEMENS servo motor Linear guide with SIEMENS permanent servo motor Type: 1FK6044-7AH71-1EG0 Type: 1FK7044-7AH71-1EG0 Ident No.: YF RN22 5076 01 001 Year of manufacture: 2003 Axis travel: 540 mm Total length: 900 mm Shaft diameter: 40 mm Thread pitch: 40 mm Ball diameter: approx. 6 mm Rsdpfx Ajgi E Hdehzsbt - Compact unit with servo motor and ball nut - Ball screw anti-rotation secured, driven via ball nut - Ball screw Ø 40 mm (hollow shaft, inner diameter = approx. 22 mm) - SIEMENS permanent servo motor Type: 1FK6044-7AH71-1EG0 (Serial No.: Ident No. YF RN22 5076 01 001) Overall dimensions (L x W x H): 900 x 200 x 330 mm Weight: 30 kg Good condition Removed from a fully functional special-purpose machine, tested before removal. 8 units available The listed price is per unit.

Condition: good (used), Year of construction: 1992, machine/vehicle number: 1085, Offer 24448 Technical specifications: - Maximum load capacity 5000 kg - Maximum clamping diameter 1800 mm - Faceplate dimensions 1200 x 1200 mm - Continuously adjustable electrical rotation Rbodjwfq Nmspfx Ahzjt - Right and left rotation - Electric remote control - Welding current transmission approx. 650 A - Drive 400 V / 2.2 kW - Space requirement approx. W 1500 x H 1650 x D 1300 mm - Weight approx. 2500 kg

Year of construction: 2003, condition: good (used), machine/vehicle number: 956-03-13, OFFER 21072 Technical data: - Load capacity positioning table approx. 750 kg - face plate diameter 500 mm - max. workpiece diameter 1600 mm - height of turntable in horizontal position approx. 750 mm - rotary table with clockwise + anticlockwise rotation - axis of rotation turntable endless 360 ° - Turning time per revolution 12,5 sec. - Swivelling left + right - Swivel axis rotation angle 180 ° - Swivel time for 180° swivel angle 10 sec. - 2 x double foot switch for turntable + swivel arm - hydr. clamping bolt for clamping the workpiece in the centre of the turntable - Clamping stroke / clamping travel of the clamping bolt 32 mm - Clamping force pushing / pulling 80 / 48,9 kN - Clamping cylinder internal thread M 27 x 40 - Positioning control SIEMENS - Operation manual or via control - Space requirement approx. W 1500 x D 2800 x H 1100 mm - weight approx. 2500 kg Rbsdpfjgxmabjx Ahzst - Separate control cabinet with high frequency device for - high frequency tools

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Technical data: Rsdpfx Ahorkmaajzjbt - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Year of construction: 1986, condition: good (used), machine/vehicle number: xxxx; Lg-Nr. 16059, Technical data: -Load capacity at horizontal position 15000 kg -Load capacity in vertical position 10000 kg -Planpauc diameter 1850 mm -Plane disc with crane support can be swivelled continuously -Rotary motion electr. infinitely controllable -Right-Link Run -Drive 400 V -Ft remote taster -Massea cables -Welding current transmission 500 A Rbjdjd Nauiepfx Ahzst -Table height at horizontal position 1850 mm -Space requirements approx. B 2450 x H 1850/2300 x T 3000 mm -Weight approx. 6000 kg

Condition: like new (used), functionality: fully functional, Complete machine vision solution composed of two complementary smart camera systems: one high-speed line scan system and one ultra-high-resolution area scan unit. Optimized for inspection of large, curved, or fast-moving parts with full onboard image processing. 🔹 Line Scan Camera – Cognex In-Sight 9902L Designed for inspecting long or cylindrical parts in motion using continuous high-speed image acquisition. • Sensor: 2K CMOS line scan (2048 × up to 16,384 lines) • Resolution: 32 MP (2K × 16K) or 16 MP (1K × 16K), software configurable Rbedpfx Aswn T Hmehzjt • Line Rate: Up to 67,000 lines/s (15 µs per line) • Vision tools: PatMax®, OCRMax™, PowerGrid®, Hotbars® • Onboard memory: 14.8 GB Flash, 832 MB RAM, 8 GB SD • Interfaces: PROFINET, EtherNet/IP, OPC UA, Modbus TCP, IEEE 1588 • Enclosure: IP67 with integrated processing (no external controller) • Use case: Full 360° inspection of rotating cylindrical objects or label surfaces on curved parts 🔹 Area Scan Camera – Cognex In-Sight 9912M Ultra-high-resolution smart camera for large field-of-view inspection tasks. • Sensor: 12 MP CMOS (4096 × 3000 px), monochrome • Frame rate: Up to 14 fps • Vision tools: PatMax RedLine®, PowerGrid®, HDR+ image processing • Interfaces: Ethernet (1 Gbit/s), PROFINET, EtherNet/IP, Modbus TCP • Memory: 7.2 GB Flash, 8 GB SD • Mounting: IP67 industrial housing with C-mount lens support • Use case: High-accuracy inspection of large static parts (e.g. appliance doors, stamped features) 🔹 Illumination and Accessories • Lights: o BE-A50_50 o 44-46-XLED-2-VD-35W (Baumann) o BEK-A100-G1T-K-BS and BEK-A500-G1T-K-BS (di-soric) o Ref. 11768475 • Strobe controller: o HPSC2-E, compatible with trigger-synchronized imaging • Other vision units referenced in setup: o In-Sight IS7905 o In-Sight IS7500M

Condition: ready for operation (used), Positioning table, welding rotator, rotary work table, Used machine Manufacturer: Weiss GMBH Type: TC 700 T Overall dimensions: Width: 870 mm Depth: 900 mm Height: 820 mm Weight: 871 kg Electrical specifications: 400V; 6.8A; 3.4 kW Rbsdow Havfopfx Ahzot Table diameter: 700 mm

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 12.22.02.24, overall weight: 1,279 kg, table height: 1,400 mm, load capacity: 1,000 kg, This is a two-axis rotary table for industrial robots of the KUKA brand Diameter of the plate: 990mm Rjdpfx Asttvrxjhzjbt Table height: 1400mm

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 140092, Here we offer a KUKA KL 1500/2 linear unit year of manufacture 2006 Rbodst Sk A Dopfx Ahzjt This linear unit is intended for KRC 2 robots - KR 210. Total length: 4,90m

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 15.22.02.24, overall weight: 1,471 kg, table height: 1,453 mm, load capacity: 1,500 kg, This is a two-axis rotary table for industrial robots of the KUKA brand Diameter of the plate: Rbjdottvqaopfx Ahzst Width: 990mm Length: 1090mm Table height: 1453mm

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 13.22.02.24, overall weight: 1,226 kg, table height: 1,393 mm, load capacity: 1,000 kg, This is a two-axis rotary table for industrial robots of the KUKA brand Diameter of the plate: Width: 1200mm Length: 1200mm Rbodpfx Ahottvvqezst Table height: 1393mm

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: CR300589, overall weight: 600 kg, This is a turntable with one axis from Weiss The servo motor on this rotary table has been replaced with one from KUKA so that you can easily install this rotary table as the seventh axis on the control cabinet of your KUKA robot. Dimensions: Diameter of the plate: 910mm Table height: 500mm Rbodpfx Ahsttwglszst

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 37.22.02.24, overall weight: 93 kg, table height: 500 mm, load capacity: 300 kg, This is a one-axis rotary table for industrial robots of the KUKA brand Rbjdpfxottwa Hj Ahzst Diameter of the plate: 450mm Table height: 500mm

Year of construction: 1993, condition: excellent (used), Maximale Positionierlänge: 2600-3000 mm Anschlag- und Mess-System mit E 255-Steuerung für die Schnittlängenpositionieru Zum Anbau an alle 1-Kopf-Sägen (Recht) Rjdpfx Aofibfnehzjbt

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: S120598-5-10, STOPA Storage System – 66.15 m Length – 850 Pallet Positions – Year 2014 – Excellent Condition We are offering for sale a high-performance industrial pallet storage system by STOPA, serial number S120598-5-10. Rbjdpfew Eb N Djx Ahzot Total system length: 66.15 meters Total pallet positions: 851 Actual usable pallet positions: approx. 600 Platform dimensions: 3000 x 1500 mm each Number of towers: 33 Pallet slots per tower: 29 Loading/unloading stations: 11 Minimum required ceiling height for installation: 9.4 m Year of manufacture: 2014 Condition: Very good – clean and well-maintained The system is currently dismantled and stored indoors at a warehouse in Piaseczno, Mazowieckie, Poland. Live demonstration is not possible, but the system was fully functional at the time of disassembly. Complete technical documentation is available. Assistance with loading and transport can be provided. Reason for sale: reconfiguration of warehouse layout. This is a premium solution for companies seeking to expand or modernize their pallet storage capacity with a reliable, high-throughput system. For further information, photos, or to arrange an inspection, please contact us.

Condition: new, Available in working lengths of 3000 - 4500 - 6000 and 7000 mm lengths Reversible Left or Right direction Anodised aluminium profile 105x 90 mm Rbsdpfxjn Nv Ugo Ahzjt Reinforced 32 mm toothed belt Single phase motor 6 Nm 115 - 230 v Positioning speed 60 m/min Repeat precision +/- 0.1 mm Smart 7 touch screen colour control unit 7" display 3 working mades Manual for Absolute or Incremental working, Preset with 8 pre set positions and Automatic cutting list mode, USB port for importing cutting lists