Used Positioning for sale (7,848)

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Technical details max. workpiece diameter 400 mm workpiece length - max. 300 mm Control SIEMENS 840Dsl swing diameter 520 mm chucking diameter 500 mm travel x / y / z 995/+,-30/580 mm Additional information Operating hours (total): 1848 hours 1.2.2 BASE TURRET UNIT AND Y-AXIS SLIDE UNIT The Y-axis slide unit is mounted on the side of the machine base. A fast-reacting, position-controlled, and maintenance-free servo motor is used for the axis drive. It drives the slide via a high-precision ball screw. A linear measuring system is built into the Y-axis. Positional accuracy: 2 µm. BASE TURRET UNIT Shortest swivel times thanks to direct swivel drive, cooled for consistent accuracy. MAIN SPINDLE 37.7 KW 1.2.3 HP TURRET DRIVE UNIT FOR DRIVED MACHINE TOOLS (C442) With internal coolant supply to the tool.* Max. speed 6,000 rpm Crosscut speed 3,200 rpm Torque at 100% duty cycle 54 Nm/18.1 kW Torque at 40% duty cycle 83.6 Nm/28.0 kW Torque at 10% duty cycle 100 Nm/33.5 kW 1.2.4 TOOL CARRIER UNIT FOR DRIVED TOOLS TOOLS, 12xBMT75 for BMT75 tool holders 1.2.6 ROTATING WORKPIECE TRANSPORT SYSTEM, O-TYPE Drag frame system for 10 workpieces Max. workpiece height (including workpiece pallet) 300 mm Max. workpiece weight 60 kg 1.2.7 SET (10 pieces) DRAG FRAME for O-type belt For workpiece diameters 150 - 400 mm 1.2.8 BLOW-OFF OF THE WORKPIECE AND THE CLAMPING DEVICE (PICK-UP) 1.2.10 COOLANT SUPPLY 15 bar Coolant pump flow rate approx. 80 l/min at 15 bar. COOLING UNIT (6.5 kW, water-air) Dlsdox D U Alspfx Ab Tea A cooling unit (with dual-circuit technology) regulates the machine's thermal balance. The spindle drive, control cabinet, and turret are kept at ambient temperature (10°C - 40°C). Cooling capacity: 6.5 kW 1.2.11 COOLANT DOUBLE FILTER, MANUALLY SWITCHABLE Filter fineness 100 µm, with electrical and mechanical contamination indicator 1.2.12 CHIP CONVEYOR, HINGED BELT VERSION - REAR-FACING Chip discharge height 1100 mm. /With integrated coolant reservoir, capacity approx. 500 l. 1.2.13 EMULSION MIST EXTRACTION Extraction capacity approx. 800 m3/h 1.2.14 FLUSHING GUN 1.2.16 WORKPIECE MEASUREMENT with a measuring probe that is completely protected from chips and coolant outside the work area. 1.2.17 BLOW-OFF PROBE 1.2.19 ENGRAVING SOFTWARE PACKAGE 1.2.20 TOOL LIFE MONITORING - SISTER TOOL MANAGEMENT 1.2.21 TOOL BREAKAGE MONITORING TOOLINSPECT MCU - EUROPE (SIEMENS 840DSL, FANUC 31i/32i) 1.2.23 3-COLOR INDICATOR LIGHT 1.3.2 AXIAL DRILLING AND MILLING HEAD - BMT75 CC 1.3.3 ANGLE DRILLING AND MILLING HEAD 90° - BMT75 CC (i=1:1) 1.3.4 TOOL SET FOR OP10 + OP20 1.3.7 HYDRAULIC FULL-CLAMPING CYLINDER SIZE 150 - with 1 media feedthrough The coolant is supplied to the workpiece through the main spindle and the clamping device. 1.3.10 3-Jaw Power Chuck KNCS-N 500-155 Quick Change n max. = 2200 rpm (Recommended speed according to DIN 6386) - Set of hard base jaws - Set of soft top jaws 1.3.11 Attachments for KNCS-N 500-155 Consisting of: - Chuck flange DIN 55026 A11 - Drawbar adapter with through-hole and shut-off valve for central air or coolant supply - Mounting screws

Condition: ready for operation (used), Year of construction: 2014, operating hours: 32,457 h, Control Unit Brand BYSTRONIC Model na Dlodox D S Ewspfx Ab Tea This Bystronic ByAutonom 3015 was manufactured in 2014. A robust CO2 laser cutting machine from Switzerland, it features a 6kW laser power and can handle steel up to 25mm thick. With a maximum positioning speed of 169m/min and a quick table changeover time of 22s, it's designed for efficiency. Consider the opportunity to buy this Bystronic ByAutonom 3015 CO2 laser cutting machine. Contact us for more information about this machine. Application Types Cutting

Condition: new, empty load weight: 3,600 kg, maximum load weight: 10,300 kg, overall weight: 13,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Drawbar extendable to approx. 3,850 mm, locking positions at approx. 1,000 mm, 2,000 mm, 3,000 mm or 3,850 mm; loaded floor height approx. 800 mm; internal vehicle width approx. 2,530 mm; centrally, 4 stake pockets for 100 x 50 mm plug-in stakes; 8 stake pockets in the outer frame; 4 lashing rings, each rated at 5.3 t; outer frame with lashing eyes; 4 warning panels with lighting; rear plug-in rotating beacon; contour marking and side underrun protection; rear mudguards and spray suppression. -- Subject to printing errors, mistakes and changes; sample images. -- More data at: !, More Details: ! Dlodpfex D Uuhex Ab Tsa

Condition: good (used), Year of construction: 1994, functionality: fully functional, Technical details table length 840 mm table width 600 mm ampere 60-120 A total power requirement 15-23 kVA weight of the machine ca. 2,75 t dimensions of the machine ca. 2760 x 1110 x 1840 m Additional information With controlled C-axis and 16-position tool changer. WORKTABLE Table size: 840 x 600 mm Dielectric above table: 360 mm Maximum workpiece weight: 1000 kg T-slots: 4 x 10 mm Dledpsx D Uykefx Ab Toa Distance table to quill without chuck (max / min): 595 / 180 mm WORKHEAD X - Y travel: 565 x 400 mm Z travel: 415 mm X - Y - Z resolution: 0.001 mm C-axis resolution: 0.001 deg. Rapid traverse speed: 800 mm/min Max. electrode weight without rotation: 100 kg Max. electrode weight with rotation: 15 kg DIELECTRIC SUPPLY Tank volume: 400 liters Paper candle filters: 4 pieces GENERATOR Dimensions (height x width x depth): 1800 x 600 x 920 mm Weight: 300 kg Rated current: 60 – 120 A Power rating: 15 – 23 kVA Dimensions (height x width x depth): 2760 x 1110 x 1840 mm Weight: 2750 kg

Year of construction: 2006, condition: ready for operation (used), Main Drive Spindle speed range 6000 rpm Tools Max tool diameter 240 mm Additional Equipment Tools: Equipped with Stark Italia profile IV68/78/Al Write production lists on machine or external PC Programme modification via keyboard, floppy disk, or ON-LINE connection Compatible with "window production" programmes Sequence and series working programmes CNC electronic positioning with 999 memorisable positions per spindle Automatic motor start/stop and electronic spindle motor brake Dlodox D Ncyepfx Ab Tsa Troubleshooting via monitor This SAC F300 was manufactured in 2006. A robust woodworking machine, it's ideal for various wood processing tasks. Contact us for more information. Application Types Other Woodworking Machinery

Condition: good (used), Year of construction: 2009, functionality: fully functional, Technical details x-travel 4000 mm y-travel 1350 mm z-travel (Vert.) 1600 mm Control Heidenhain iTNC 530 table surface area 4200 x 1150 mm table load 13 t tool taper ISO 50 spindle turning speed - stepless 0 - 3000 U/min transmission ratio 2 spindle motor 28/38 kW feed range 5000 mm/min rapid traverse (X/Y) 12 m/min rapid traverse (Z) 10 m/min weight of the machine ca. 37 t dimensions of the machine ca. 12,9 x 6,53 x 3,79 m Additional information In January and October 2025 the milling head was overhauled (new bevel gears and bearings). Total costs 51.000,- Euro. Working hours (dated 31. July 2025): Machine on: 38.483 h Auto cycle: 12.798 h Spindle hours: 11.645 h Dedpfxsx D Uqco Ab Tola * CNC-control HEIDENHAIN iTNC 530 * Electronic handwheel * 50-position tool changer * Controlled universal milling head, indexable 2.5 / 2.5 deg. * Coolant device * Cooling through the spindle * 2 chip conveyors * Oil cooler * Measuring probe * Machine documentation

Condition: ready for operation (used), Year of construction: 2023, Control Unit Brand HAAS Main Drive Spindle speed range 15000 RPM Spindle motor power 22.4 kW Tool taper ISO40 taper Media Chip conveyor Yes Additional Equipment Chip Conveyor: Positioned above coolant tank with auto-reverse function Dljdpfx Aox D S Apjb Tea This 5-axis HAAS UMC-500SS universal machining centre was manufactured in 2023. It offers advanced capabilities for complex and precise machining tasks. Consider the opportunity to buy this HAAS UMC-500SS universal machining centre. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, Dledox D Ultopfx Ab Tea radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: ready for operation (used), Year of construction: 2016, operating hours: 27,000 h, General Data Measurements width 6360 Measurements depth 9960 Measurements height 4724 Machine weight 35000 Dodpex D R H Hjfx Ab Tela Control Unit Brand HURCO Model WinMax 5 Main Drive Spindle speed range 18000 Spindle motor power 35 kW Main motor power 187 KVA Movement X-Axis Movement 3200 mm X-Axis Rapid Traverse 15 m/min Y-Axis Movement 2100 mm Y-Axis Rapid Traverse 15 m/min Z-Axis Movement 920 mm Z-Axis Rapid Traverse 10 m/min Table Outer length 3000 mm Outer width 1700 mm Min distance between vertical spindle and table 164 mm Max distance between vertical spindle and table 1084 mm Table load 11000 Tools Slots in storage 40 Max weight 15 kg Max tool diameter 125 mm Max tool length 300 mm Additional Equipment Oversized linear guides and ultra-rigid roller linear guides Ball screws with double nut and automatic centralized lubrication system Screw chip conveyor and chip conveyor with scrapers Machine interior washing system with emulsion gun/compressed air Ring with emulsion nozzles in the shaft head Large side doors for access LED-illuminated workspace Heat exchanger in the electrical cabinet Premium remote control equipped with LCD display IKZ-20 Spindle cooling CTS20 (20 bar) This 3-axis Hurco DCX32-5Si vertical machining centre was manufactured in 2016. It features a large work surface of 3,000x1,700 mm, supports a maximum table load of 11,000 kg, and offers extensive travel distances with X at 3,200 mm, Y at 2,100 mm, and Z at 920 mm. Equipped with a high-speed main spindle capable of 18,000 rpm and a robust 40-position tool magazine, this machine is ideal for complex, large-scale machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: ready for operation (used), Year of construction: 2011, General Data Machine weight 21000 kg Main Drive Punching force 300 Kn Number of axis 2 Table Table load 160 kg Dsdpfxox D Hpqo Ab Tsla Control Unit Brand FANUC Movement X-Axis Movement 2500 mm Y-Axis Movement 1525 mm This AMADA EMZ 3610 NT CNC punching machine was manufactured in 2011. It features a Fanuc control system, a punching force of 300kN, and a working area of 2500 x 1525 mm, extendable to 5000 x 1525 mm with repositioning. The machine can handle sheet thicknesses up to 4.5 mm and supports a maximum table load of 160 kg. If you are looking to get high-quality punching capabilities, consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information. Application Types Punching

Year of construction: 2013, condition: ready for operation (used), General Data Machine weight 6500 kg Main Drive Punching force 300 Kn This Euromac MTX Flex 6 Hybrid was manufactured in 2013. It features a maximum punching force of 300 kN and can handle sheet weights up to 200 kg. Equipped with a hydraulic system controlled by a servomotor, it ensures precision and efficiency. The machine supports automatic repositioning up to 10000 mm and has a maximum punching diameter of 85 mm. Ideal for high-quality punching capabilities. Contact us for more information about this machine. Application Types Punching Dljdpfxex D Ia Re Ab Tja

Condition: ready for operation (used), Year of construction: 2012, Control Unit Brand MITSUBISHI Model M720 SSS Main Drive Spindle speed range 15000 Tool taper ISO40 Number of axis 5 Movement Dljdpfsx D Nrzjx Ab Tja X-Axis Movement 1140 mm Y-Axis Movement 610 mm Z-Axis Movement 810 mm Table Table load 850 kg Additional Equipment Air blast through spindle Rotary table with counter-support and hydraulic lock – 360° rotation Heidenhain linear scales on X, Y, Z axes; rotary encoders on A and C axes Coolant through spindle, 20 bar + low-pressure cooling system Renishaw OMP60 workpiece probe + receiver // Renishaw TS27R tool probe Chip flushing system Chain-type chip conveyor Telescopic covers for X, Y, Z axes Full machine enclosure with safety door lock Central lubrication system with oil cooler This 5-axis Pinnacle BX300A was manufactured in 2012. It features a spindle speed of 15,000 rpm, a table size of 1300 × 610 mm, and a 24-position tool magazine. Equipped with a Mitsubishi M720VS control system, it supports complex machining with continuous rotation on the C-axis and tilting on the B-axis. Consider the opportunity to buy this Pinnacle BX300A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Year of construction: 2019, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 2700 mm Measurements height 2858 mm Machine weight 4400 kg Main Drive Number of axis 4 Movement X-Axis Movement 600 mm X-Axis Accuracy 0.001 mm Y-Axis Movement 400 mm Y-Axis Accuracy 0.001 mm Z-Axis Movement 400 mm Z-Axis Accuracy 0.001 mm Workpiece Workpiece weight 1000 kg Additional Equipment Linear tool changer (LTC): 6 positions This 4-axis AgieCharmilles Form E 600 die-sinking EDM machine was manufactured in 2019. It offers precision and efficiency for complex mold manufacturing. Consider the opportunity to buy this AgieCharmilles Form E 600 die-sinking EDM machine. Contact us for more information. Dlodpfx Aox D Nimeb Tea Application Types EDM

Condition: ready for operation (used), Year of construction: 2007, General Data Machine weight 7500 kg Control Unit Dlodpfxox D Sgbo Ab Tja Brand SIEMENS Model SINUMERIK 810D powerline and ShopMill Main Drive Spindle speed range 50–12000 Tool taper SK40 Number of axis 3 Movement X-Axis Movement 640 mm X-Axis Rapid Traverse 70 m/min Y-Axis Movement 600 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 500 mm Z-Axis Rapid Traverse 40 m/min Table Table load 600 kg This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2007. It features a Siemens 810D ShopMill control, SK40 spindle with speeds up to 12,000 rpm, and a tool magazine with 30 positions. The machine includes a chip conveyor, coolant gun, and a high-pressure coolant system. Ideal for precise and efficient machining. Contact us for more information about this machine. Application Types Milling

Year of construction: 2020, condition: ready for operation (used), Main Drive Number of axis 3 Spindle Speed 18000 RPM Dsdsx D Hngopfx Ab Tsla Spindle motor power 5.6 kW Movement X-Axis Movement 3350 mm Z-Axis Movement 180 mm Y-Axis Movement 200 mm This 3-axis COMEC MD TOP XL CNC Wood Machining Centre was manufactured in 2020. It features a robust mono-block structure, high-speed axes positioning up to 70 m/min, and versatile electro-spindles for drilling, milling, and cutting. The machine includes a CAD-CAM control unit with a 17" touchscreen and full safety enclosures. If you are looking to get high-quality woodworking capabilities, consider the COMEC MD TOP XL machine we have for sale. Contact us for more information. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2013, General Data Machine weight 17000 kg Control Unit Brand HEIDENHAIN Main Drive Spindle speed range 12000 rpm Tool taper SK 40 Movement X-Axis Movement 1800 mm Y-Axis Movement 900 mm Z-Axis Movement 1020 mm Dodpfxex D E Dao Ab Tela Additional Equipment Under-Table Chip Flushing System Integrated Chip Conveyor This 3-axis TBI MVC 1890 was manufactured in 2013. It features a robust cast iron body, cross-slide table design, and slideway guides on all axes for enhanced rigidity and precision. Key specs include a Heidenhain CNC control, SK40 spindle taper, and a maximum spindle speed of 12000 rpm. It also boasts a 24-position automatic tool changer and integrated chip conveyor. Consider the opportunity to buy this TBI MVC 1890 vertical machining centre. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,316 h, General Data Measurements width 2665 mm Measurements depth 3065 mm Measurements height 2840 mm Machine weight 5600 kg Control Unit Brand SIEMENS Model Sinumerik 828D Main Drive Spindle speed range 20 – 12000 Number of axis 3 Movement X-Axis Movement 550 mm Y-Axis Movement 550 mm Z-Axis Movement 510 mm Table Table load 600 kg Tools Max weight 8 kg Max tool diameter 80 mm Dlsdpex D Nigsfx Ab Toa Max tool length 300 mm Type of tool holder SK40 Media Power consumption 20 kVA Additional Equipment Job Shop package Renishaw PP40 wireless workpiece probe TS27R tool measurement probe Scraper-type chip conveyor Coolant tank capacity: 200 L (left side) Coolant pump: 20 bar internal through-spindle coolant Machine enclosure roof LED work area lighting This 3-axis DMG MORI M1 PRO was manufactured in 2022. It features a robust inline spindle with a speed range of 20-12000 rpm and a 24-position automatic tool changer. The worktable supports up to 600 kg with dimensions of 850 × 650 mm. Additional highlights include a Renishaw PP40 probe, 20 bar coolant system, and LED lighting. Ideal for precision machining tasks. Contact us for more information about this machine. Application Types Milling

Year of construction: 2014, condition: ready for operation (used), Main Drive Number of axis 3 This 3-axis IMA BIMA CUT 145/330 CNC Wood Machining Centre was manufactured in 2014. It features a working range of 3300 mm in the X axis and 1450 mm in the Y axis, with a spindle power of 18 kW. The machine includes a tool magazine with up to 18 positions and a vacuum clamping system for secure workpiece fixation. If you are looking to get high-quality milling capabilities, consider the IMA BIMA CUT 145/330 machine we have for sale. Contact us for more information. Dsdpfxsx D Nite Ab Tola Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2005, Main Drive Number of spindles 1 Spindle speed range 4000 Spindle motor power 22/15 kW Tool taper VDI 40 Number of axis 2 Movement X-Axis Rapid Traverse 60 m/min Z-Axis Rapid Traverse 30 m/min Workpiece Workpiece drm 280 mm Workpiece X 320 mm Tools Dsdpfxsx D Ng Ee Ab Tela Number of index 12 This Okuma LVT 300 was manufactured in 2005. A robust vertical turning machine featuring a max. turning diameter of 280 mm and a swing diameter of 320 mm. It offers a rapid traverse rate of 60 m/min on the X-axis and 30 m/min on the Z-axis, with a turning speed range up to 4000 U/min. Ideal for efficient, precise operations, the machine includes 12 tool positions. A great opportunity to buy this Okuma LVT 300 vertical turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1500 mm Measurements depth 3900 mm Measurements height 3200 mm Machine weight 7000 kg Control Unit Model SINUMERIK 840Dsl Brand SIEMENS Main Drive Spindle speed range 4500 rpm Spindle motor power 18kW at 100% duty cycle, 28kW at 40% duty cycle Tool taper DIN 55026 - A6 Number of axis 2 Movement X-Axis Movement 745mm X-Axis Rapid Traverse 60m/min Z-Axis Movement 300mm Z-Axis Rapid Traverse 30m/min Media Dodex D Eu Ejpfx Ab Tsla Chip conveyor Yes Internal cooling Yes Additional Equipment Coolant tank capacity: 360 liters This EMAG VSC 250 vertical turning machine was manufactured in 2014. It features a powerful main spindle drive with up to 28kW power at 40% duty cycle and a speed range of 0-4500 rpm. Equipped with a Siemens SINUMERIK 840Dsl control system and a robust 12-position EMAG flange turret, it ensures precise and efficient operations. Ideal for handling workpieces up to 6kg with its specialized hydraulic chuck. For more information about this vertical turning machine, please reach out to us. Application Types Turning

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle motor power 8.5 kW, up to 1780 RPM Stroke 85 mm (20–105 mm) Number of axis 3 Additional Equipment Dodpfx Absx D Idpj Tola Clamp & stripper units for secure work holding 12 sets of clamps Position clamp ensures firm fixing during hole processing This 3-axis KOTEC PSD-4520 drilling machine was manufactured in 2020. It features a gantry type setup with a maximum processing capacity of 4500 × 2000 mm and a spindle motor of 18.5 kW, achieving up to 1780 RPM. The machine includes a CAD file interface and operates on a Windows-based system, ensuring ease of use and flexibility in operations. Consider the opportunity to buy this KOTEC PSD-4520 drilling machine. Contact us for more information about this machine. Application Types Other Machine Tools

Condition: ready for operation (used), Year of construction: 2018, General Data Measurements width 2800 mm Measurements depth 2020 mm Measurements height 2450 mm Dedpfxsx D D Dxj Ab Tela Machine weight 8200 kg Control Unit Model TNC 640 Brand HEIDENHAIN Main Drive Number of spindles 1 Spindle speed range 1-42000 rpm Spindle motor power 15 kW Tool taper HSK E40 Number of axis 5 Movement X-Axis Movement 550 mm Y-Axis Movement 400 mm Z-Axis Movement 400 mm B-Axis Movement -120°/+60° C-Axis Movement 40 rpm Table Outer length 650 mm Outer width 500 mm Tslots size 5 x 14H12 Number of tslots 100 Table load 500 kg Additional Equipment Tool Magazine Capacity: 100 positions This 5-axis INGERSOLL High Speed Eagle V5 was manufactured in 2018. It features a Heidenhain TNC 530 control, a 15 kW spindle, and 100 tool slots. With travel dimensions of X: 550mm, Y: 850mm, and Z: 450mm, this vertical machining centre represents a robust opportunity for precision machining. Only machine is included. Yaskawa robot and other parts of the automation shown in the video not scope of supply. Contact us for further details regarding this vertical machining centre. Application Types Milling

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 3450 kg Control Unit Brand Schüco Main Drive Spindle speed range up to 18000 rpm Number of axis 4 Dljdpfx Abjx D H Tpo Tea Movement X-Axis Movement 7530 mm Y-Axis Movement 1180 mm Z-Axis Movement 660 mm Additional Equipment Number of clamps: 8 This 4-axis SCHÜCO PBX AL-7200 was manufactured in 2008. It features a large X-axis travel of 7,530 mm, a Z-axis of 660 mm, and a maximum spindle speed of 18,000 rpm. The machine includes an 8-position tool magazine and is capable of machining from three sides, suitable for both aluminium and steel profiles. It comes with a SCHÜCO CNC control system and weighs approximately 3450 kg. Contact us for more information about this machine. Application Types Milling

Year of construction: 2022, condition: ready for operation (used), General Data Machine weight 3700 kg Main Drive Spindle speed range 24000 Spindle motor power 8.5 kW Number of axis 3 Movement X-Axis Rapid Traverse 80 m/min Y-Axis Rapid Traverse 80 m/min Z-Axis Movement 250 mm Z-Axis Rapid Traverse 12 m/min Tools Type of tool holder HSK 63F Additional Equipment Remote Control Pendant Z-axis Tool Length Sensor 4 Vacuum Suction Cups // 4 Additional Positioning Pins (long) Automatic Dust Shoe Height Adjustment // Automatic Part Pushing System Receiving Table for Finished Parts (2800 x 2070 mm) Loading Table (2800 x 2100 mm, 2000 kg Capacity, 500 mm Stack) CNC Control System TPA – WSCM Straight-line Nesting Software (Included) Pneumatic and Electrical Preparation for Drill Head Upgrades Dlsdpfx Aox D Idiob Toa ECO Mode for Energy Saving This 3-axis INFOTEC 3121 PRO EVO was manufactured in 2022. It features a working area of 2200 x 3100 mm, Z-axis travel up to 350 mm, and a high-speed main spindle with a power of 8.5 kW and speed range up to 24,000 RPM. Equipped with a 14-position tool magazine and a robust vacuum table with 6 zones. Ideal for advanced CNC wood machining. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2012, Control Unit Model Series 0iMD Brand FANUC Main Drive Spindle speed range 1000 rpm Number of axis 4 Movement X-Axis Movement 1600 mm Y-Axis Movement 800 mm Dodpfx Abex D S Dto Tela Z-Axis Movement 800 mm Table Outer length 1700 mm Outer width 800 mm Table load 2000 kg Additional Equipment Options included: 4th axis This 4-axis AWEA AF-1600 vertical machining centre was manufactured in 2012. It features a large table size of 1700 mm x 800 mm with a load capacity of 2000 kg, and a spindle speed of 1000 rpm. Equipped with a Fanuc Series 0iMD control and a 16-position tool magazine, the AWEA AF-1600 machine we have for sale is ideal for complex machining tasks. Contact us for further details regarding this vertical machining centre. Application Types Milling