Used Platewriter 2000 for sale (7,571)

Condition: used, Year of construction: 2011, operating hours: 5,000 h, machine/vehicle number: M344Z16201031AHC, travel distance X-axis: 2,032 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, table load: 2,700 kg, spindle speed (max.): 12,000 rpm, The following repairs were carried out: Defective inverter identified and replaced Bearings in the Y-axis replaced; bearing set VTXZ Y-axis (5 pieces, 35x72) Rotary table adjusted Orientation adjusted TECHNICAL DETAILS Travel range X-axis: 2,032 mm Travel range Y-axis: 660 mm Travel range Z-axis: 610 mm Spindle speed: 12,000 rpm Spindle cooling: Internal cooling Rapid traverse rate X/Y/Z: 35 m/min Power: 18 kW Tool holder: SK 40 Tool positions: 40 Tool diameter with full occupancy: 75 mm Maximum tool weight: 10 kg Maximum tool length: 300 mm Table load: 2,700 kg Table clamping area: 2,285 x 660 mm T-slots in the table according to DIN 650: 5 Slot width: 18 mm H8 Slot spacing: 125 mm Positional accuracy X, Y, Z: 0.02 mm Repeatability X, Y, Z: 0.01 mm MACHINE DETAILS Gjdjzka Hiopfx Ad Isbp Footprint W x D x H, doors open / with control / chip conveyor: 6,950 x 5,150 x 3,700 mm Transport weight: 20,000 kg Machine weight: 18,000 kg Operating hours Machine hours: 11,417 hours Spindle hours: approx. 5,000 hours Further technical data can be found in the attached documents.

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Gbedpfx Adjzlfmks Ijp Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: excellent (used), Year of construction: 2019, Krauss Maffei KM 250-2000 CX Blue Power with Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2019 Injection Unit: Screw diameter: 70 mm Shot weight: 980 g Gbsdpfx Adezc Nw Ae Ijp Injection pressure: 1877 bar Metering volume: 1077 cm³ Clamping Unit: Clamping force: 250 t Tie bar spacing: 630x630 mm Platen dimensions: 995x1050 mm Ejector: hydraulic Clamping unit: hydraulic Control: MC6 – touchscreen Additional Equipment: Very good technical condition Operating hours: approx. h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Air valve x 1 Hydraulic core pull x 3 Pneumatic core pull x 1 Hot runner control x 16 Hardened injection unit – bimetallic Energy-efficient machine – equipped with a system of 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Additional oil filtration pump Sepro Industrial Robot SR S5-35HL S4 Trans Year of manufacture: 2015 5-axis robot: 4 axes driven by servomotors (electric): X, Y, Z, B; C axis Touch screen control panel Robot safety package Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at an extra charge Dimensions: Weight: 20,100 kg Length/Width/Height: 6.50x2.20x2.30 m All machines offered are started up by our service technicians before sale. A video of the technical tests of the selected machine can be provided or it is possible to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Gbjdpfxozc N Twj Ad Iep Price: On request

Condition: used, Year of construction: 2000, Colour: Grey Veneer press continuous press gluing press plate press Colombo Machine dimensions: 4500x1300 Oil heated to a maximum of 140 degrees input/outpu t6 cylinders Solid plates 40mm - Details: - └ Description: Osama glue roller is no longer available - Year: 2000 Gbedjwnhabepfx Ad Ijp - Documentation available: No - CE certificate present: No - Press drive: Hydraulic - Max. workpiece length [mm]: 4500 - Max. workpiece width [mm]: 1300 - Max. workpiece height [mm]: 140 - Total stroke [mm]: 140 - Number of stages [pcs]: 1 - Material of press plates: Steel - Number of cylinders [pcs]: 6 - Cylinder diameter [mm]: 120 - Heating boiler present: Yes - Heating type: Oil heated - Max. working temperature [°C]: 140 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2013, Gluing, edge trimming, combination milling, flat pull blade, max. edge thickness: 3/8 mm, max. workpiece height: approx. 40/50 mm, min. workpiece length: approx. 250/300 mm, min. workpiece width: approx. 70 mm, feed rate: approx. 10 m/min, ready for operation: approx. 6 min, power consumption: 6.5 kW, drive system, working height: 880 mm, dimensions: 3600 x 1300 x 1500 mm, weight: approx. 660 kg. Storage location: Supplier. Gsdpszcw Amsfx Ad Isbp

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK 828D, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mm Turning length : 243 mm Work area max. turning diameter:288mm max. machining length:243mm X-axis:175mm Z-axis:350mm Main spindle Chuck diameter:210mm Max. bar diameter:67mm Spindle bore diameter:76mm Drive power:10.5/20 kW max. torque:213 NM Gbedpfxjyavz Aj Ad Iep max. speed:4,500 rpm Tailstock Quill diameter:65mm Quill stroke:80mm Axial force:4,312 N Center point adapter:MT4 Tool turret Number of tool stations:12 Tool holder:BMT45 Powered tools:Yes Max. speed:5,000 rpm

Condition: excellent (used), Year of construction: 2000, Technical data: • Manufacturer: Hebrock GmbH (Made in Germany) • Type: EURO 2000 • Year of manufacture: 2000 • Voltage: 230 / 400 V • Frequency: 50 Hz • Power: 7 kW • Current consumption: 13.6 A Working range: • Workpiece thickness: approx. 10 – 50 mm • Edge thickness: approx. 0.5 – 3 mm • Minimum workpiece length: approx. 250 mm • Minimum workpiece width: approx. 70 mm • Feed rate: approx. 10 m/min • Compressed air connection required (approx. 6–7 bar) Gbjdpezbyvasfx Ad Iep Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2011, Technical details: standard turning dia.: 200 turning length: max. 810 mm control: MSX-701 MAPPS IV greates pass round over bed: 800 mm Max. distance between centres: 1130 mm max. turning diameter: 320 mm max. workpiecediameter: 300 mm bar material dia.: 65 mm Traverse X-Axis 1: 210 Traverse X-Axis 2: 210 mm Traverse X-Axis 3: 210 mm Traverse Y-Axis 1: 110 (+65/-45) mm Traverse Y-Axis 2: 110 (+45,/-65) mm Traverse Z-Axis 1: 300 mm Traverse Z-Axis 3: 300 mm Traverse Z-Axis 2: 810 mm Traverse B-Axis: 870 mm turning speed range - spindle: 5.000 1/min Number of spindle speed ranges: 2 . spindle nose: JIS A2-6 spindle bore: 73 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° turning speed range - spindle: 5.000 1/min spindle nose: JIS A2-6 spindle bore: 73 mm bar material dia. max: 65/52 mm spindle bearing diameter: 120 mm C-Axis: 0,001 ° Number of Turrets: 3 . Number of tool stations: 16 x 3=48 pos Schank height for square tool: 20 mm Diameter of boring bar: 32 mm turret changing time (4-stations): 0,18 sec Number of driven tools: 16 x 3=48 pos max. spindle speed driven tools: 6.000 U/min. Rotary tool machining ability: M16 / Ø16 . rapid traverse X-axis: 30 m/min rapid traverse Y-axis: 20 m/min rapid traverse Z-axis: 50 m/min drive capacity - spindle motor: 25 / 22 kW power capacity - driven tools: 7,5 / 5,5 kW total power requirement: 92,7 kVA weight of the machine ca.: 9,4 t dimensions of the machine ca.: 4,0 x 2,8 x 2,4 m Accerories Chip conveyor Coolantsystem C-axis in main and sub spindle part counter total counter tool setting Overhead partsgripper with conveyor belt. Spindle 1 Chuck SMW KNCS-N 210 / 52 mm Spindle 2 Collet Chuck Hainbuch Spanntop nova Kombi Axfix 65 Robot interface CNC Turning- and Milling Center MORI SEIKI NZ 2000 T3Y2 Godpozk U Rpjfx Ad Iebp The NZ2000 T3Y has 2 spindles and 3 turrets, and 2 turrets have the Y-axis function and built-in milling motors. This not only allows synchronized machining using 3 turrets, but also achieves heavy-duty cutting and high-speed machining using rotary tools thanks to the built-in motor turrets. The robot cell has been diemanteled, it is now a stand alone machine. A bar feeder can be added. *

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Gsdpfx Aewu Ackjd Iebp Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3

Condition: new, Fanuc A06B-0213-B100 AC servo motor, with pulse encoder A860-2000-T301, mounting hole spacing: 70 x 70 mm, unused, in very good condition, 100% functional. Godpfx Aei D Hyxod Iebp

Condition: used, Year of construction: 2023, Lathes Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Machine weight: 18,800 kg Gedsy Nxc Aopfx Ad Ijbp Condition: rarely used, like new

Condition: used, Large Size Sewing machine Meccanotecnica Aster 2000/51 Fadenheftmaschine - Sewing machine Meccanotecnica Aster 2000/51 Year 1997 - Serial-No. 115208 Pre-loader Meccanotecnica Sistema Large Size  Opening device (4+4) Sheet control Godpfxsydfhyo Ad Isbp Sewing device, Transport chain Thread cutting device Delivery and Plus Stacker with roller conveyor belt Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Kompaktanlage zur Herstellung v. Stempeln, Eindruckklischees und Photopolymerdruckplatten. Compact system for the production of stamps, imprint clichés, and photopolymer printing plates. Es können sowohl Flüssigphotopolymer (Resin) als auch Photopolymer-Plattenmaterial verarbeitet werden. Both liquid photopolymer (resin) and photopolymer plate material can be processed. Belichter Klischeeherstellung / Photopolymer Platemaking AZ System 2000 Serial-No. 277 Plattenformat / Plate Size max. 23 x 33cm Mit 9 Arbeitsprogrammen Maschinendaten: Gbjdpfx Adjza H Srs Iop Maße / Size Breite / Width 52cm, Tiefe / Deep 47cm, Höhe / High 95cm Gewicht / Weight ca. 62kg Elektrischer Anschluss / Eletric supply 220Volt, 1,3 kW Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2009, Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Gbsdpeh Axrrofx Ad Isp Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2011, Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3Year 2011 - Serial-No. BTA 734/3 V5B16897 Performance - up to 24 bandings per minute Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Gbjdoh Axrvepfx Ad Isp Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Year of construction: 2026, load capacity: 2,000 kg, Equipment: foot remote control, 2000 kg welding positioner, hydraulically adjustable in height Speed: 0.05 to 0.8 rpm Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approx. 700 mm Gedpfxjzk Rkfs Ad Ijbp Height adjustment with vertical disc, center to center: 960 mm ~ 1910 mm Dimensions with horizontal disc: 1200 mm to 1900 mm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, load capacity: 180 kg, arm reach: 2,900 mm, Model: KR210 (L180)-2 2000 Payload: 210kg or 180kg Arm Reach: 2700 mm or 2900 mm Condition: Used & Tested & Painted Year: 2008 (Multiple Options Available) Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant Gjdpfx Aeq Hfahjd Iebp As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and designs for your specific production needs.

Condition: used, Year of construction: 2012, machine/vehicle number: 220790, This ARBURG Allrounder 1500T 2000-400 injection molding machine will be auctioned online as part of our industrial auction/machine auction due to the closure of the J&S GmbH Automotive Technology site. Godpfx Adszk Hkzs Ijbp You can find this and many other items on our platform.

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 550 mm, table length: 2,600 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 2,000 mm Travel range, Y-axis: 500 mm Travel range, Z-axis: 550 mm C-axis rotation: 360° Table length: 2,600 mm Table width: 550 mm Tool holder: ISO40 Main spindle power: 22 kW Spindle speed: 20 - 12,000 rpm Positioning accuracy: 0.01 mm Travel speed: 667 mm/s Number of axes: 4 MACHINE DETAILS Control system manufacturer: Siemens Power consumption: 24 kW Dimensions & Weight Dimensions (L x W x H): 7,500 x 3,700 x 2,500 mm Net weight: 9,600 kg Shipping packages: 2 EQUIPMENT Tool magazine Gsdpfszk Dv Ujx Ad Isbp External cooling Chip conveyor CE marking

Condition: like new (used), functionality: fully functional, Year of construction: 2021, Essentially consisting of: Gbodjq Tcmvepfx Ad Iep Feed hopper (20 and 95 cbm), SANDVIK H-2000 cone crusher, double-deck screening plant, various conveyor and stockpile belts, power generator (300 kVA), electrical installation with control cabinet installed in container, storage silo, dust atomization system

Condition: excellent (used), Year of construction: 2004, Description to follow! Gbjdpfxsxy S D Ss Ad Iep

Condition: used, Year of construction: 1975, workpiece diameter 125 mm grinding depth 50 mm clamping length 2000 mm total power requirement 0,5 kW weight of the machine ca. 1000 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 – 2.000 Year approx.. 1975 S/N 66 32 7872 – J 3278 _____ Distance between centres 50 – 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 – 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm ght of workpiece 250 kg Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 – 160 mm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø 15 – 60 mm Grinding spindle speeds 13,000 – 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect Gedovanrcopfx Ad Isbp centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

Condition: excellent (used), Year of construction: 2007, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,100 mm, controller manufacturer: KUKA, controller model: KRC2 ED05, The KR 240 L210-2 2000 model offers a high payload capacity, extended reach, and excellent repeatability, making it a powerful asset for demanding production environments. Technical Specifications: Payload: 210 kg Maximum Reach: 3100 mm Mounting Position: Floor Condition: Used&Tested Pose Repeatability (ISO 9283): ±0.05 mm Controller: KR C2 ED05 Number of Axes: 6 Application Areas: Applying / Painting / Gluing, Assembly, Cutting & Separation, Material Handling, Laser Welding, Machining, Measuring & Inspection, Palletizing & Packaging Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman. Gbjdpfjw Hqv Asx Ad Ijp (Source: KUKA's Website)

Condition: used, Year of construction: 2000, bar material dia. 5 - 80 mm Bar length 250 - 1.550 mm bar length 1.550 mm longitudinal feed 600 mm height adjustment 775 - 1.175 mm dimensions of the machine ca. 2,25 x 1,10 x 1,80 m Gbjdpfezkvt Esx Ad Iop weight of the machine ca. 0,5 t Bar Feeder SAMSYS - Multisam MUS 2000 - NOT TESTED - for parts