Roll-off trailer

Ressenig 2 Achser Bj.2000 6,70m Länge

Year of construction: 1987, condition: used, machine/vehicle number: 7.0176, Note: We have 6 pieces of this machine in stock! Manufacturer: Gildemeister Type: GS 36 - 6 A/C Machine No.: 7.0176 Year of manufacture: 1987 Weight: 11t General / technical data: Portal-6Spindle automatic lathe spindle pitch circle: 300mm number of longitudinal slides: 6 number of cross slides: 2 large cross slide stroke: 60mm largest longitudinal slide stroke: 125mm Spindle speeds: Stepless 562 - 3373 rpm Main time range: Stepless 1,95 - 78 sec. Secondary time range: 0,79 - 2,13 sec. Drive power: DC motor spindles 20kW; feeds 8kW footprint: approx. 1720 x 4700mm Remark: The machine is not convertible for bar work. Equipment: - 1 creep feed drive for set-up operation - 1 automatic central lubrication device - 1 coolant device with pipes and pump - 1 cross slide, position 3 (without curves) - 1 cross slide, position 5 - 6 longitudinal slides (without drive, without curves) - Feed for independent longitudinal slide, flexible, position 1-6 - Programmable logic controller IPC 620 - Noise protection 80db Ppodpfx Amoin Ub Tsyew - Automatic feed restart with electrical protection of the side door - Schanier belt chip conveyor - Design of the machines with DC drives for speed and feed - KIENZLE terminal 2450-07 with signal interface and data transmission control. Accessories: Electrical version: The electrical equipment consists of a DC main drive with power 20 kW for the spindle drive and a three-phase servo motor for the feed drive with power 8kW (protection class IP 54) and corresponding switchgear and control devices as well as the necessary installation. Total connection of the machine 32kW/h.

Condition: used, Year of construction: 1970, functionality: fully functional, machine/vehicle number: D12L/8394, Offer Number: D12L/8394 Machinetype: wire nail press Podpfsw Nhwuex Amyepw Make: WAFIOS Type: S75 Constr. year: 1970 wire diameter: 1,8-3,1 mm nail length: 10-75 mm output - pieces/min: 420 Location: In our warehouse

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,600 mm, total height: 1,600 mm, total width: 1,000 mm, overall weight: 1,500 kg, input voltage: 400 V, OFFER OF THE WEEK! Metal Technics Polska Professional CNC machines, lasers, and metalworking equipment We are a manufacturer and importer of high-quality metalworking machines. We supply proven technologies from Poland, Europe, and Asia—used by hundreds of companies across Europe. For 15 years, we have focused on quality, precision, and reliability. HYDRAULIC PRESS BRAKE 1320x40 MM Touchscreen control + SERVO The press brake is used for sheet metal forming. During the ram cycle, the sheet can be bent to match the required geometric profile. The machine can be used in many industries, including electromechanical, light industry, agricultural machinery production, shipbuilding, automotive, and aerospace industries. Pjdpfx Aoyr N E Eemyopw Technical Data: Nominal force: 400 kN (40 tons) Working table length: 1320 mm Distance between columns: 900 mm Throat depth: 180 mm Ram stroke: 100 mm Daylight: 290 mm Back gauge range: 500 mm Approach speed: 80 mm/s Working speed: 9 mm/s Return speed: 80 mm/s Main motor power: 4 kW Dimensions: 1500 × 1300 × 1600 mm AMADA Tool Clamping System: Each press is equipped with a quick and safe tool clamping system. The Amada-Promecam system is a reliable manual technology that allows fast tool insertion without additional tools. Control System MTP 3212: Modern controllers combining ease of use with advanced programming capabilities. Touchscreen interface Automatic bending angle calculation Storage of thousands of programs Functions: Manual programming (no visualization) Tool library and editing SD card memory Crowning correction: YES Angle correction: YES Axis correction: YES Safety: Side guards – protection against accidental contact Light curtains – stop the machine when intrusion is detected Rear safety zone – prevents access from the back Delivery available. Transport cost quoted individually.

Condition: used, Year of construction: 2011, operating hours: 800 h, Ammann AV 12-2 Year of manufacture: 2011 Approx. 800 operating hours Service newly performed Very good condition Ppodpfx Amsxl Uy Teyew Worldwide delivery possible!

Condition: new, Year of construction: 2025, Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/minute; filling range: 1-400ml; accuracy: ±0.5%; tube diameter: 10-50 mm (one mould is required for each tube diameter); tube length: 80-230 mm; number of filling heads: 1; storage hopper capacity: 45L; parts in contact with the product are 316L stainless steel; power supply: 220/380V, power consumption: 9kW; compressed air: 0.4-0.6MPa; machine dimensions: L2000xW1160xH2100 mm. Ppodpsv Nldusfx Amyew Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: excellent (used), Year of construction: 2019, operating hours: 174 h, functionality: fully functional, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 12 months, tank capacity: 40 l, total height: 1,316 mm, total width: 691 mm, total length: 1,118 mm, water tank capacity: 40 l, noise level: 60 dB, We offer for sale a Rydwan BD 50/40 RS Bp Battery-Powered Scrubber Dryer. Condition: Very good Year of manufacture: 2019 Operating hours: 174 rbh The machine is in excellent condition both visually and technically. It has undergone a comprehensive, detailed refurbishment, making it fully functional and ready for immediate use. All machines offered by us are presented in genuine photographs — you purchase exactly the machine shown in the pictures. All equipment purchased from us comes with a 12-month WARRANTY. Technical Specifications: • Power source: Battery-powered • Drive: Traction motor • Working width (brushes): 510 mm • Working width / vacuuming: 691 mm • Clean/dirty water tank capacity: 40 / 40 l • Theoretical area coverage: 2,805 m²/h • Practical area coverage: 2,000 m²/h • Battery type: Maintenance-free • Battery voltage/capacity: 36 / 76 V / Ah • Maximum battery run time: 2.5 h Pjdpfew Icz Eex Amyepw • Charger supply: 230 V / 50–60 Hz • Brush rotation speed: 180 rpm • Brush pressure: 20 / 26 g/cm² / kg • Water consumption: 1.5 l/min • Acoustic pressure level: 60 dB(A) • Rated power: max. 1,080 W • Permissible total weight: 330 kg • Dimensions (L x W x H): 1,118 x 691 x 1,316 mm Set includes: - New batteries - New disk brush - New squeegee blades - New protective rubber skirting

Condition: used, mileage: 726,000 km, power: 265 kW (360.30 HP), first registration: 03/2009, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, Year of construction: 2009, Equipment: air conditioning, electronic stability program (ESP), MAN TGS 18.360 / 4x4 TRAKTORUNIT Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2009 ? MILAGE: 726 000 km Ppedpfxjwyh Rws Amyew EQUIPMENT: ? ABS ? ASR ? POWER STEERING ? EL WINDOWS ? EL MIRRORS ? ENGINE BRAKE ? TACHOGRAPH ? AIRCONDITION TOTAL WEIGHT: 19 000 kg WHEELBASE: 370 cm TIRE SIZE: 13R22,5 SUSPENSION: FRONT: SPRING SUSPENSION BACK: AIR SUSPENSION TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 44854

Condition: used, mileage: 477,163 km, power: 176 kW (239.29 HP), first registration: 12/2006, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro4, Equipment: ABS, Tel.: Call (Contact · Telephone · Mobile · WhatsApp) Special equipment: Tow coupling Ringfeder 6441, rear crossmember, car phone antenna, audio system: MAN CD radio 24V, electrically adjustable and heated exterior mirrors, wide-angle exterior mirrors electrically adjustable and heated, left, wide-angle exterior mirrors electrically adjustable and heated, right, battery 140 Ah, mechanical battery master switch, kerb mirror left electrically adjustable and heated, kerb mirror right electrically adjustable and heated, rear axle differential lock, entrance lighting driver's/passenger's side, driver's seat comfort, air suspended, electric window regulators, flame start system, tinted windscreen, mechanical lifting roof, rocker - brake EVB, fuel tank: 200 L, reading lights for driver and passenger, raised air intake, dry air filter right below, seat upholstery: comfort quality, exterior sun visor, tinted door windows, central locking Additional equipment: Axle configuration: 4x2, on-board computer MAN-Tronic, compressed air connection front, electronic brake system MAN-Brakematic, EURO 4 engine, cab: C (Compact), suspension: leaf/air, generator 28 V 80 A, gearbox type: Eaton 8309, rear axle HY-0925, body/chassis: chassis, heated fuel filter, adjustable steering column (steering wheel), engine 6.9 l - 176 kW Diesel, engine brake, spare wheel carrier behind rear axle, disc brake rear axle, disc brake front axle, rear axle stabilizer, plastic bumper, underride protection rear, underride protection front, viscous fan, front axle VOK-05 cranked, permissible gross vehicle weight 11.99 t * MAN TGL 12.240 4x2 BL * Refrigerated box fresh service * Thermoking unit * Engine and electrics running * Tail lift with safety lock * Euro 4 * Automatic transmission * VIN: WMAN14ZZX7Y180436 Psdjvrnryjpfx Amyspw * Year of manufacture: 07.12.2006

Condition: good (used), Year of construction: 1994, Electric motor, three-phase motor, brake motor -Manufacturer: Fimec, electric motor with brake -Type: H90L6T -Power: 11 kW -Speed: 900 rpm -Shaft: Ø 24 x 50 mm -Design: B5 -Protection rating: IP54 -Brake: -Number: 2x motors available -Price: per piece -Dimensions: 355/200/H235 mm -Weight: 17.8 kg Ppjdpfx Asyhntgomyew