Used Plate Grinding Machine for sale (72,382)

Condition: like new (used), Year of construction: 2016, functionality: fully functional, 1 used Petschauer PLT800 Manual machine for re-grinding the seat of carbide saw teeth, with a cutting-off device for carbide saw blades that require repair, with a diameter of 100 to 800 mm, where the carbide teeth are soldered on too long. This machine is equipped with a double grinding wheel holder and a double saw blade holder for 2 different applications. Right side: Re-grinding the seat after desoldering, using a 175 mm diameter and 4 mm wide ceramic grinding wheel, with an adjustment scale from 15° negative to 35° positive, and blade thickness adjustment. Left side: Cutting off carbide teeth that are soldered on too long, using a 150 or 175 mm diameter and approximately 1 mm wide diamond cutting disc. Adjustment scale for rake angle, 15° negative to 35° positive. The cutting-off process takes place at a 0° blade angle. Additional applications: Setting the tooth back Gjdpfx Akjzz Rlkj Uoug Setting the chamfer on TCT saw blades Face grinding with the help of a diamond grinding wheel Re-sharpening on the circumference of the saw blade at 0° Alternate tooth arrangement possible. Technical data: Saw diameter: Max. 800 mm Weight without stand cabinet: 128 kg Dimensions: Width: 92 cm Depth: 72 cm Height: 58 cm Total power: 0.75 kW Drive speed: 2600 rpm Coolant tank: 60 liters Dimensions: Ceramic grinding wheel 175 mm Diamond cutting disc: 150 or 175 mm Operating voltage: 230/400 volts, 3 phases, 50 Hz or 230/440 volts, 3 phases, 60 Hz Fuse protection: 3 slow-blow fuses 10 A

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 Godpfx Akewk Rlxs Ueug max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, center width: 1,200 mm, overall weight: 7,000 kg, travel distance X-axis: 500 mm, travel distance Z-axis: 800 mm, controller model: Bosch Rexroth MTX, TECHNICAL DETAILS Center distance: 1,200 mm Max. outer diameter: 350 mm Max. workpiece weight between centers: 50 kg Gsdpfxezwm Aks Ak Usug Cross slide, X-axis Travel, X-axis: 500 mm Max. speed: 30 m/min Resolution: 0.1 µm Longitudinal slide, Z-axis Travel, Z-axis: 800 mm Max. speed: 30 m/min Resolution: 0.0005–0.1 mm Multi-function head, B-axis Swivel range: -45° to +225° Swivel time for 180°: < 3 s Positional accuracy: 0.0002° Repeatability: 1″ Resolution: 0.001° External machining Max. machining length: 750 mm Peripheral speed: 50 corundum / 80 CBN Drive power: 15 kW Max. grinding wheel dimensions: Ø 400 × 50 × 152.4 mm Internal machining Max. bore diameter: 250 mm Max. bore depth: 235 mm Drive power S1: 1.8–7.5 kW Speed range: 30,000–50,000 rpm Workpiece spindle, C-axis Max. speed: 1,500 rpm Drive power: 1.8 kW Drive torque: 90 Nm Resolution of measuring system: 0.001° Roundness accuracy: 0.8 µm Positional accuracy: 0.0001° Tailstock Quill stroke: 50 mm / 80 mm Quill diameter: 60 mm Bearing: hydrostatic Fine adjustment for cylindricity corrections: ± 40 µm 3-point steady rest Clamping range, diameter: 20 – 150 mm Coarse adjustment: 40 µm Fine adjustment: 2 µm Adjustability: stepless MACHINE DETAILS CNC control: Bosch Rexroth MTX Dimensions & Weight Dimensions (L x W x H): 2,850 x 2,470 x 2,290 mm Weight: 7,000 kg EQUIPMENT 3-point steady rest

Condition: ready for operation (used), Year of construction: 1988, functionality: fully functional, overall weight: 7,500 kg, grinding diameter: 300 mm, controller model: Siemens Sinumerik 840D Solutionline, No minimum price – guaranteed sale to the highest bidder! The control system was upgraded to a Siemens Sinumerik 840D Solutionline in 2014. The new control system was overhauled in 2016! TECHNICAL DETAILS Spindle speed range: 170–18,000 rpm Grinding diameter: 20–300 mm Swinging diameter: 350 mm (500 mm) Workpiece length: 300 mm (1,300 mm) Recommended grinding depth: up to 300 mm Center height above the workpiece table: 200 mm (300 mm) Center height above the grinding table: 330 mm (430 mm) Workpiece spindle bore: 50 mm (70 mm) Grinding table, Z-axis Total grinding table travel: 650 mm (950 mm) Resolution: 0.001 mm Rapid traverse: 12 m/min Grinding feed rate: 0–9.99 m/min Feed rate: 0–99.99 m/min Incremental feed value during reversal: 0–0.999 mm Grinding table, X-axis Total grinding table travel: 150 mm Resolution: 0.001 mm/rev Rapid traverse: 5 m/min/rev Grinding feed rate: 0–5 m/min/rev Feed rate: 0–99.99 mm/min/rev Guedpfx Aszwmz Tjk Ujg Incremental feed value during reversal: 0–0.999 mm/rev Workpiece spindle head, B-axis Swivel range: −32° (−23°) to +2° Resolution: 0.0001° (0.36″) U-axis Total travel: 300 mm Resolution: 0.001 mm/rev Traverse speed: 5 m/min MACHINE DETAILS Control system: Siemens Sinumerik 840D Solutionline Machine weight: approx. 7.5 t Space requirement: approx. 5.00 × 4.00 × 2.20 m

Condition: excellent (used), Year of construction: 2006, operating hours: 30,000 h, functionality: fully functional, Reishauer RZ 400 Gear Grinding Machine 1-2 shift operation; excellent condition; fully equipped all-inclusive machine Machine under power for inspection during ongoing production Year of manufacture: 2006 Control: Siemens 840 D Machine dimensions: approx. 3.3 m (L) x 2.7 m (W) x 2.5 m (H) Machine weight: approx. 16,000 kg Condition per documentation: very good condition, complete with tailstock, oil mist extraction, filter and cooling system (Hoffmann HSF), no defects reported, sale due to low utilization Workpiece Data Workpiece diameter: 10 to 400 mm Number of teeth: 5 to 999 Face width: 0 to 300 mm Centres distance: approx. 60 to 700 mm Module: 0.5 to 8 Pressure angle: 14° to 30° Helix angle: ±45° Max. workpiece weight: 300 kg Axis Data B-axis grinding spindle: power 10 kW Speed: 4010 rpm Peripheral speed: 63/72 m/s dynamic balancing included C-axis workpiece spindle: torque 180 Nm, max speed 480 rpm Z-axis travel: 300 mm, feed rate 0 to 5.0 mm/rev X-axis travel: 490 mm, rapid traverse 15 m/min Y-axis shifting travel: 220 mm P-axis grinding oil nozzle travel: 80 mm W-axis tailstock travel: 640 mm, speed 12 m/min W1-axis indexing sensor travel: 250 mm, speed 45 m/min A-axis grinding head swivel range: ±48°, swivel speed 28°/s Equipment Tailstock CNC dressing unit type RP2-SW, semi-automatic Oil mist extraction Filter and cooling unit: HOFFMANN Filter type HSF 100 One flange with used grinding wheel Guodpexupfcjfx Ak Ueg Two measuring probes / meshing sensors Software: MMINC Version 07.02, PLC Version V3.075A

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 2,600 h, controller model: Fanuc 32 C, control type: CNC control, Equipment: documentation/manual, Standard programs such as parameter settings Dressing settings Speed settings Program management settings Limitation of travel distances x + y Basic parameter settings Grinding wheel management program Warming-up cycle program Surface plunge grinding program Measuring program 15 kVA transformer Full enclosure Meister G3 Gsdpfx Aew I Tt Sek Ueug Spindle upgrade to 3.7 kW, disc 225 mm ETHER interface for network connection Control module with extended memory Fanuc Macro B option Program creation for batch programs Programmable spindle speed WinWop program for contour creation (Windows) WINWop program for error compensation WinWop postprocessor CGS Complete Grinding Solutions software Option Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L Diamond wheel 100 mm for pre-dressing device Regrinding package diamond wheel G3 / W Option – Clamping and Balancing Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device, size 1 Grinding wheel flange for G3, bore 51 mm Option Filter Systems Belt filter system 175 l Extraction unit for emulsion mist 500 Inquiries only from Europe, preferably the EU.

Condition: used, Year of construction: 2005, grinding length 5200 mm grinding width 1000 mm workpiece height 320 mm Control Siemens 840D Passage width 1300 mm grinding height 320 mm grinding motor 306 kW grinding motor turning speeds up to 320 U/min grinding motor feed, infinitely variable 0,5-35 m/min Godpfx Ajz Alafek Uoug grinding motor adjustment in steps 0,002-1 mm grinding motor adjustment, continuously stepless bis/upto 5 mm/min dimensions of the machine ca. 11,21 x 3,2 x 3,85 m CNC production surface grinding machine with segment head Equipment / Accessories: - with segment head, diameter 1400 mm segment head dimensions: 120/106 x 41 x 250 mm number of segments: 1 set = 26 pieces - with electro-magnetic table 5200 x 1300 mm - Marposs measuring control travel (Z1 axis), vertical: 420 mm - coolant flow rate 2000 l/min lifting station 2x pump for 1000 l/min

Condition: excellent (used), 3-Roll Plate Bending Machine / Round Bending Machine Manufacturer: Nosstec, Sweden Type: 8266 15/40 Year of manufacture: 1998 Serial number: 3058 Working width: 1,540 mm Plate thickness: up to approx. 4 mm Gjdpfx Aez Agn Djk Ueug Rollers: 3 pieces, steel rollers Drive: motorized Operation: electric control with foot switch and mechanical hand adjustment Weight: approx. 840 kg Documentation included Very good condition, fully functional.

Condition: used, Year of construction: 2014, Surface grinding machine, Geibel + Hotz, type FS 420 SD. Guodpfx Akez Affuo Ujg

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 200 x 450 mm Installation height (Max. distance spindle/table): 450 mm Max. Table load: 150 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2080 x 1200 x 1700 mm Weight, approx.: 950 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements Guodpfx Aksp Dt Tto Ueg - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 2550 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 250 x 500 mm Installation height (max. distance spindle/table): 500 mm Max. Table load: 250 kg Motor power main spindle: 1,5 kW Connection: 400 V Dimensions (LxWxH), approx.: 2250 x 1400 x 1800 mm Weight, approx.: 1350 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device Godjp Dt T Nopfx Ak Uoug - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Pictures may show the machine with special accessories and with application examples.

Condition: used, Conventionally controlled universal tool grinding machine / scriber grinding machine Type / Model: Deckel S1 Condition: Used Year of manufacture: 1980s Technical data Center height: 65 mm - 95 mm Center distance: max. 250 mm Grinding diameter: max. 130 mm Table dimensions: approx. 470 x 175 mm Spindle speed: 3,750 rpm to 7,500 rpm, adjustable in two stages Motor power: 0.6 / 0.75 kW; 400 V Gujdozmrzwepfx Ak Ujg Equipment: - Wedge shoes - Collet chuck holder MK 4 Request item: Transportation costs will be provided in a separate quote.

Condition: used, Jung F 50 Surface Grinding Machine Condition: Used Gjdpfoyuy Euox Ak Usug Technical Data Grinding Length: 500 mm Grinding Width: 200 mm Grinding Height to Spindle Center: 285 mm Table Size: 700 x 200 mm Spindle Speed: approx. 3000 rpm Grinding Wheel: 225 x 20 x 51 mm Feed: manual via handwheel Rapid Traverse Wheel Dressing Device Dimensions (L / W / H): approx. 1850 mm / 1300 mm / 1750 mm Weight: approx. 1400 kg

Condition: used, Cylindrical Grinding Machine: Schaudt Model: RFH 500 Condition: used Centre height: 100 mm Centre distance: 500 mm Spindle speeds: 2225 / 2500 / 2825 rpm Grinding wheel diameter min./max.: 200 - 300 mm Weight, approx.: 1900 kg Equipment: - Manual & automatic operation - Coolant system Guedey R Dlfepfx Ak Ueg - Machine lamp - Emergency stop button - Machine leveling feet

Condition: used, Year of construction: 2009, CNC-controlled round bending machine Schröder-Fasti Type 114 Year of manufacture: 2009 Condition: Used, like new Exhibition machine Operating hours: < 50 hours Technical data 10/1.0 10/1.5 Useful length (mm) 1080 1080 Sheet thickness (400 N/mm²) 1.0 1.5 Roller diameter (mm) 68 80 Motor power (kW) 8.2 8.2 Weight (kg) 1780 Standard equipment: - CR80 control system on a rotatable panel, frequency-controlled rear roller positioning - Rollers, approx. 700 N/mm² tensile strength - Three-roller drive - Hydraulic adjustment of the bending rollers - Hydraulic adjustment of the lower rollers - Automatic opening of the upper roller bearing - Foot switch - Electrical safety control Optional equipment: Gedsy Twfqspfx Ak Uoug - Rollers hardened and ground, roller diameter 68/80 mm - Tube ejector - Hydraulic tube support for large tubes

Condition: new, Technical data: Distance between axes d. Grinding wheel - axis of the column: 300 mm Max. distance table - grinding wheel: 280 mm Largest grinding surface: 140 x 300 mm Rapid feed per speed: 2 Fine adjustment by micrometer: 0.01 mm Cup wheel dimensions: 178 x 78 x 78 mm Segment dimensions: 50 x 16 x 90 mm Speed of the grinding wheel: 2840 1/min Spindle motor power: 2.2 kW Electric pump power: 0.06 kW Weight: 400 kg Dimensions: 850 x 850 x 1650 mm Equipment: - Cast column on adjustable ball roller bearings Guedpsvnriujfx Ak Uog - Wet grinding device - Safety low-voltage system (24V) - Grinding wheel holder and grinding segments (first set) - Grinding wheel protection and Table enclosure - Operating and maintenance instructions - CE declaration of conformity

Condition: used, Year of construction: 2006, Technical data: Working ranges: X-axis: 1870 mm Y-axis: 400 mm Z-axis: 560 mm C-axis speed: 3000 rpm Max. grinding area: 1700 x 620 mm without table dresser: 1500 x 620 mm Table dressing device, diamond wheel: ø 110 mm Grinding wheel diameter: 400 mm Max. width: 100 mm Gujdpfsxzq I Sex Ak Ueg Grinding wheel bore: 127 mm Distance table to spindle center: 800 mm Table height: 900 mm Max. table load: 2200 kg Weight, approx.: 12,000 kg Equipment: - Siemens SINUMERIK 840D control, OPO12 operator panel - Measuring system - Electro-magnetic clamping plate - Full enclosure - Central lubrication - Mist extraction - Clamping system for automatic wheel change - Coolant unit - Coolant recirculating chiller - Profiling device Water treatment system available at additional cost

Condition: new, Precision surface grinding machine MIOTAL FSM 3060 AH Table size: 300 x 600 mm Installation height: 500 mm Max. table load: 300 kg Motor power: 4.6 kW Connection: 400 V Dimensions: 2300 x 1790 x 2200 mm Weight, approx.: 2000 kg Equipment and scope of delivery: - All cast iron parts, such as machine frame, table, etc., made of MEEHANITE® quality cast iron - Automatic transverse and longitudinal feed - Permanent lubrication - Automatic transverse feed device - Rear splash guard - Grinding wheel - Grinding wheel flange - Dressing device - Balancing arbour - Balancing scale - Dressing diamond - Machine lamp - Leveling elements - Operating tool - Operating manual - CE Special equipment for our stock machine: - Electric magnetic chuck 300 x 600 mm (fine-pole) Gedpfxjd Sfd Ej Ak Ueug - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Automatic vertical feed AD 5 (NC-controlled) for model AH - Function: Automatic rapid traverse vertically and automatic fine feed vertically - Automatic demagnetization control for magnetic chuck - Coolant system with magnetic separator - Manual dressing device - Part enclosure - Ergonomically arranged control panel - Additional grinding wheel flange - Ball screw for transverse feed - Grinding wheel and flange for normal steel - Grinding wheel and flange for HRC55 Alternative equipment features / other machine configurations available on request.

Condition: used, Horizontal surface grinding machine Type/Model: ELB Star 2 Condition: Used Technical data: Grinding length max. 630 mm Grinding width max. 250 mm Workpiece height max. 300 mm, installation height above table Godpfszdrgnsx Ak Ueug Magnetic table standard 600 x 250 mm Total power requirement approx. 8.5 kW Weight approx. 3200 kg Note: Automatic workpiece feed system is defective.

Condition: new, Precision surface grinding machine with automatic longitudinal and transverse feed. All castings, such as machine stand, table, etc., are made of MEEHANITE® quality cast iron and are therefore ideally suited for rough everyday work. Ideal for tool and mold making. Table size: 400 x 800 mm Installation height (max. distance spindle/table): 550 mm Max. Table load: 400 kg Motor power main spindle: 3,7 kW Connection: 400 V Dimensions (LxWxH), approx.: 3450 x 2050 x 1900 mm Weight, approx.: 3250 kg* * only machine without auxiliary units Features: - All castings, such as machine column, table, etc., made of MEEHANITE® quality castings. - All guideways hardened and ground - Automatic cross and longitudinal feed - NC-controlled automatic vertical infeed - Ergonomically arranged control panel - Automatic central lubrication - Separate hydraulic power pack - Grinding wheel - Grinding wheel flange Gedop Dt Uijpfx Ak Ujug - Manual dressing device - Balancing mandrel - Balancing scale - Dressing diamond - Demagnetizing device - Machine light - leveling elements - Operating tool - Operating instructions - CE Available options: - Elektromagent clamping plate (fine-pole) - Automatic demagnetization control for electromagent clamping plate - 2-axis digital display, accuracy 0.001 mm, X 450 / Y 500 mm - Coolant system with magnetic separator / magnetic separator - Partial enclosure with limit switch protected sliding doors - Full enclosure with limit switch protected sliding doors - Additional grinding wheel flange - Grinding wheel and flange for mild steel - Grinding wheel and flange for HRC55 - Ball screw for cross feed - Further options on request Note: Picture shows FSM 3060 AH of identical design. Pictures may show the machine with special accessories and with application examples.

Condition: used, Year of construction: 2008, Product Information "Nosstec Round Bending Machine" 4-Roll Round Bending Machine with crowning Type / Model Nossebro Luna 8268 30/20 Condition Used Year of Manufacture 2008 Technical Data Maximum working length 3,040 mm Max. sheet thickness (400N/7mm2)(t) 2.0 mm Number of rolls 4-roll system (arranged asymmetrically/symmetrically) Driven rolls All 4 rolls individually driven Roll diameter (top roll) 140 mm Motor power 2.2 kW Power connection 400 V / 3-phase Control voltage 24 V Equipment: CNC control Mylock 100 Features - CNC control with the capacity to store 200 programs in internal memory and virtually unlimited programs by attaching an external USB flash drive - Pre-bending and final bending in one cycle - The pre-bending value is approximately 70% of the specified material. - All four rolls are driven - Crowned rolls - Programmable axis - Designed for highest accuracy - Adjustable crowning of the lower roll - Program backup via external computer or connected USB stick Inquiry item: Transport costs in an individual offer. Gusdpfx Akozp Ip Ae Ueg

Condition: used, Year of construction: 1986, HK Orion surface grinding machine Condition: Used Year of manufacture: 1986 Technical data: Magnetic clamping table: 500 x 1,000 mm Automatic alignment system Gujdpfx Akozdq Nbe Usg Automatic feed function Electronic handwheel Machine light

Condition: used, Year of construction: 2000, Kellenberger 600 U cylindrical grinding machine Condition: Used Year of manufacture: 2000 Gusdjy T E Rzspfx Ak Ueg Technical data: Table: Distance between centers: 600 mm Travel: 900 mm Travel per handwheel revolution, coarse/fine: 20 / 2.5 mm Travel per division on the handwheel: 0.05 mm Speed, hydraulically continuously variable: 0.02 - 6 m/min Reversal travel, minimum: 2.5 mm Dwell time during reversal, continuously variable: 0 - 5 sec Swiveling range: 11 degrees Cross slide: Travel with feed handwheel in fine or coarse mode: 220 mm Travel per handwheel revolution, coarse/fine: 8 / 1 mm/ø Division on the handwheel: 5 µm/ø Division with micrometer adjustment: 1 µm/ø Rapid traverse, hydraulically: 40 mm Feed, hydraulically: 0.95 mm/ø Form grinding: Feed rate: 0.25 - 25 µm/sec Surface grinding: Feed increments per table reversal: 130 µm/ø Grinding spindle head: Grinding wheel for external cylindrical grinding: 400 x 50 x 127 mm

Condition: used, Year of construction: 2012, functionality: fully functional, NEPTUN ROCK 11 – Year 2012 Straight line edge grinder with 11 wheels for flat edges, Thickness 3-40 mm Godpfx Akezz Smps Usug Speed 0.5-5 m/min. Power 25 kW Overall dimensions 8089 x 2340 x 1450 mm Weight 3500 kg

Condition: ready for operation (used), functionality: fully functional, total height: 1,840 mm, total length: 1,700 mm, total width: 1,750 mm, type of input current: three-phase, overall weight: 1,850 kg, travel distance X-axis: 490 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 115 mm, grinding spindle motor power: 2,200 W, input voltage: 400 V, spindle nose: HSK 63, Tool grinding machine EWAG RS15 TECHNICAL CHARACTERISTICS: Stroke X axis: 490 [mm] Stroke Y axis: 130 [mm] Stroke Z axis: 115 [mm] Grinding spindle motor power: 2.2 [kW] B axis swivelling stroke: 260 [°] Workpiece spindle nose: HSK 63 Variable power feeding: Yes Digital read out: RSF-Elektronik Number of axes Digital Read Out: 3 Lubrication tank capacity: 100 [l] Centralized lubrication: Oui Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight: 1850 [Kg] Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Guodpfxezz Rtuo Ak Ueg Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.