Used Plastic Bag Machine for sale (68,241)

Condition: ready for operation (used), Year of construction: 1994, A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible. Hnjdpjyk Hb Usfx Ahvji

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heater Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Usable Heating Plate Area: Width 600 mm x Depth 400 mm Maximum Part Dimensions: - Max. Part Width: 620 mm - Max. Part Depth: 420 mm - Max. Upper Part Height: 350 mm - Max. Lower Part Height: 350 mm (Combinations of part heights possible, depending on contour) - Max. Working Temperature for contact process: 400°C The machine's modular frame structure enables easy retrofitting and conversions. Side doors and the front door in the welding area are easy to open (for simple retooling). The automatic safety lift door ensures high operator safety. Temperature controllers on the operator panel are equipped with actual/target value displays. The operator panel is a Siemens PLC unit. Machine control is via Siemens PLC (S7-300 controller). The heating elements feature temperature sensors for temperature regulation and act as a safety shut-off in case of overheating. Locating pin systems on the tool clamping surfaces enable reproducible receptacle positions. Advantages of Heater Element Welding Technology: - Secure welding of parts with thin or varying wall thicknesses is possible - Low rejection rate due to precise and reproducible weld joints - Thanks to precise time control, temperature control, and force dosing, even sensitive parts can be welded - Almost all thermoplastics can be welded with this process - Different plastic types can be welded together (compatibility should be checked) Technical Data: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Nominal current: 20 A - Required supply cable cross-section: 5 (supply cables) each 6 mm² - Required pneumatic connection: 6 bar Machine Dimensions: Hjdpfxjykvdlj Ahveni - Machine width approx. 1.22 m - Machine width incl. operator panel approx. 1.8 m - Machine depth approx. 2.1 m - Machine depth incl. operator panel approx. 2.6 m - Machine height approx. 2.4 m - Machine height with raised safety door approx. 2.85 m (door open) Weight: Approx. 2.2 t

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2025701, total width: 2,600 mm, total length: 9,500 mm, total height: 1,900 mm, cutting length (max.): 530 mm, type of input current: three-phase, compressed air connection: 8 bar, power of the servo motor: 4,000 W, power: 4 kW (5.44 HP), overall weight: 8,000 kg, inner diameter: 76 mm, feed rate X-axis: 160 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 35 m/min, feed length X-axis: 530 mm, feed length Y-axis: 130 mm, feed length Z-axis: 800 mm, working width: 1,050 mm, input voltage: 380 V, installation height: 2,500 mm, Gutenberg MASTER BAG 300X (2026) – High-Speed Square Bottom Paper Bag Machine Boost your production with the MASTER BAG 300X, a next-generation roll-fed paper bag machine engineered for industrial manufacturers producing eco-friendly packaging at scale. Built for reliability, precision, and speed, this fully servo-driven system is ideal for producers replacing plastic packaging with sustainable kraft paper solutions. Built for Industrial Paper Bag Production The MASTER BAG 300X is designed for continuous, high-volume manufacturing of square bottom paper bags without handles. Its fully automated workflow ensures consistent quality while reducing labor and material waste. Why manufacturers choose this model Fully automatic roll-fed production High output up to 220 bags per minute Flexible bag size range for multiple markets Servo-driven precision and stable operation CE-certified for global compliance This machine is perfect for companies expanding into sustainable packaging. Precision Engineering & Automation The 2026 model integrates YASKAWA servo technology and a modern control system that automates the full production cycle: • Automatic paper feeding and tension control • Tube forming and precise cutting • Bottom folding and gluing • Automatic stacking and counting • Multilingual HMI touchscreen for easy operation The result: high efficiency, low waste, and consistent bag quality. Technical Specifications (2026 Model) Bag Format Range Bag Length: 280 – 530 mm Bag Width: 150 – 330 mm Bottom Width (Gusset): 70 – 180 mm Material Compatibility Paper Thickness: 60 – 150 gsm Paper Roll Width: 470 – 1050 mm Max Roll Diameter: 1500 mm Core Diameter: 76 mm Performance Maximum Speed: Up to 220 bags/min Installed Power: 8 kW Power Supply: 380V / 3-phase / 50Hz Compressed Air: 6–8 bar Hnsdpfxswzm I Ro Ahvsi Machine Data Weight: 8,000 kg Dimensions: 9500 × 2600 × 1900 mm Advanced Features ✔ Fully servo-driven YASKAWA system ✔ Photoelectric cutting length control ✔ Inline gluing and bottom forming ✔ Automatic stacking and counting ✔ Supports printed, unprinted, and PE-coated papers ✔ Optional inline flexographic printing unit available ✔ CE certification for EU and global markets Designed for Multiple Industries The MASTER BAG 300X enables manufacturers to supply a wide range of markets: Food & Dry Goods Flour, sugar, rice, pasta, grains, baking mixes Coffee, tea, spices, lentils, nuts, dried fruits Bakery & Takeaway Bread bags, pastries, cookies, fast-food packaging Retail & E-commerce Grocery stores, organic shops, takeaway and boutique bags Agriculture & Pet Food Seeds, fertilizer, animal feed, eco pet food packaging Pharma & Herbal Powders, supplements, herbal products DIY & Hardware Screws, tools, small parts packaging A Sustainable Production Investment The MASTER BAG 300X is a powerful solution for manufacturers transitioning to plastic-free packaging while increasing capacity and profitability. Reliable, efficient, and built for long-term production — the MASTER BAG 300X is a smart investment for the future of paper packaging. Contact us today for pricing, configuration options, and delivery availability.

Condition: like new (used), Year of construction: 2020, Technical Specifications Number of bags: 6 Total weight when filled (kg): 180 Empty weight (kg): 170 Hnedev S D Tajpfx Ahvei Power: 0.18 kW - 400V / 50 Hz Diameter (mm): 1100

Condition: good (used), functionality: fully functional, color: green, Year of construction: 2008, operating hours: 1,000 h, The machine is being sold complete, including belt conveyor, handling unit, filling plant, and RC sack palletizing system. Comprises: Bakomat 4B handling unit, 10m³ hopper, conveyor trough type FR 600 x 1650, belt conveyor BTL 500x42,525, year 2005, belt conveyor BTL500/2/24-5.5m, year 2005, belt dosing scale Chrotec, vertical form-fill-seal machine Binder und Co, MK-X, 400 bags/hour with 25kg bags, approx. 13,000 operating hours, year 2005, sliding conveyor PD 2455/600, RC robot cell by Packmann d.o.o, year 2005, complete Kuka KR200 2E robot, robot year 2000, approx. 5,000 operating hours, pallet wrapping machine Plator LCN. All existing plans related to dimensions and further information are available in the attached PDF. Products produced: - Fine chippings 1-2mm - Fine chippings 2-4mm - Chippings 4-8mm - Premix chippings/sand Hedpovw Urwefx Ahvsni - Play sand 0-2mm - Washed sand 0-4mm - Scented play sand - Concrete gravel 0-16mm - Rounded gravel 8-16mm

Condition: used, Year of construction: 2009, machine/vehicle number: 266, Beutel-Einschweißmaschine / Bag sealing machine Vision Pack Visionbag MF060111 Baujahr / Year 2009 - Serial-No. 000266 Produktion pro Minute 20 Stück / Production uop to 20 pcs/minute Produktabmessungen / Product dimensions: Breite / Width min. 160mm - max. 250mm Hedpfx Aheut Tipjvjni Länge / Length min. 100mm - max. 360mm Stärke/Dicke / Thickness 15mm Verwendbare Folien: Polyethylen, transparent oder bedruckt (Version mit doppelter Lichtschranke). Stärke max. 30 micron. Films that can be used: polyethylene, transparent or printed (version with double light barrier). Thickness max. 30 microns. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2021, The machine is in very good condition. Suitable for the packaging of nuts or beans. A multihead weigher is included. Hnsdpfeykb Ehox Ahvji

Condition: like new (used), Year of construction: 2022, operating hours: 170 h, functionality: fully functional, machine/vehicle number: 156-600, total height: 2,920 mm, total width: 1,480 mm, total length: 2,600 mm, type of input current: AC, overall weight: 2,500 kg, film width: 100 mm, compressed air connection: 6 bar, input voltage: 400 V, product height (min.): 50 mm, product height (max.): 110 mm, product width (max.): 50 mm, product length (min.): 50 mm, product width (min.): 50 mm, product length (max.): 110 mm, nominal power (apparent): 8 kVA, filling weight (min.): 5 g, filling weight (max.): 20 g, air demand: 0.4 m³/h, input current: 12 A, roll diameter: 76 mm, Equipment: documentation/manual, safety light barrier, The FlexiBag Bi 260 was acquired as a test machine for processing polymer-bound phase change granules. All specifications regarding packaging width, package weights, and output rates refer to polymer granules with a bulk density of 550 kg/m³ and a density of 860 kg/m³. In principle, the machine can be used for all types of granulates, powders, etc. For dosing, a BW211 Micro belt weigher from DOWATEC is installed. This enables very precise dosing. Thanks to two dosing belts, a high productivity of 30 cycles per minute can be achieved by the packaging machine. The FlexiBag Bi 260 is suitable for impulse and heat-sealable films as well as nonwovens. The packaging machine has only been used as a test machine and has a low total operating time of 170 hours. Hodpfx Asyi Eqxshvsni

Condition: used, Automatic vertical packaging machine for sachets and pouches with bulk products such as spices, powders, sugar, and more. The machine produces four-side sealed sachets. Technical parameters: 1. Output: 35 - 72 pcs/min (2,100 - 4,300 pcs/h depending on size) 2. Sachet dimensions: - width: 105 - 135 mm - length: 150 - 180 mm 3. Portion size: 90 - 240 cm3 – accurate disc dosing. 4. Motor: 600 W 5. Heating elements – power: 3120 W Hnjdpfjyipmqsx Ahvsi 6. Overall dimensions: - length: 1010 mm - width: 1350 mm - height: 2200 mm - weight: 850 kg - year of manufacture: 1988 The machine is used and in working condition. The date printer requires repair or can be replaced with another date marking unit.

Condition: good (used), Year of construction: 2014, Food Machinery Co E4230 VFFS bagger 2014, Stainless VFFS, jaw width 250mm, adjustable seal temperatures and variable cool time, currently set with 95mm diameter forming set, with Eidos Swing thermal printer, 1Ph Hnsdpswtqrwjfx Ahvsi

Condition: ready for operation (used), Including Ascending Conveyor SBM 45 and Counting Machine ZMR 3/ 3-130. Hedpfx Ashncwiohvoni

Year of construction: 1991, condition: ready for operation (used), Filling format: 70-150g, forming shoulder format: 120/ 140mm, with three forming sets and multi head scale. Hnedpfxehtvmao Ahvsi

Year of construction: 1990, condition: ready for operation (used), Was used for filling 10l milk bags, there is a second machine as a source for spare parts available. Hnodeir U S Rspfx Ahvji

Condition: ready for operation (used), Speed: 60 products/min, product dimensions: 50-500x60-200mm, max. coil diameter: 300mm, max. coil width: 550mm, length: 1600mm, width: 1060mm, height: 1650mm, weight: 450kg. Hnsdod Ni Uyspfx Ahvsi

Condition: ready for operation (used), Year of construction: 2009, Roll width: 500mm, bag dimensions X/Y: 250mm/159mm, packaging capacity: 2 bags/cycle, filling weight range: 200g-250g, cycles: 50, control: Siemens Simatic S7-300, machine dimensions X/Y/Z: approx. 5800mm/2000mm/2300mm. Documentation available. On-site inspection is possible. Hsdpfsvtqrrox Ahvoni

Year of construction: 2009, condition: ready for operation (used), Opening width/ height: 25-450/ max. 200mm, min. product length: 80mm, max. film roll width: 550mm, max. roll diameter: 350mm, working height: 800-900mm, controls: SIEMENS S7-300, length: 2140mm, width: 1450mm, with shrinking tunnel. Hnsdpfsfft Sgsx Ahvei

Condition: ready for operation (used), Year of construction: 1996, Two Bosch vertical form fill and seal machines are available. 1) Bosch SVB 2501 A, year of manufacture: 1993, bag type: pillow bag, bag weight: 250g/500g, bag length range: 80mm-250mm, max. production output: 40 cycles/min, power consumption: 3kW, machine dimensions X/Y/Z: approx. 1300mm/2500mm/1700mm, weight: approx. 1100kg. Including clipping unit PS mako BS 600-CSP, year of manufacture: 2015. 2) Bosch SVB 3601 L, year of manufacture: 1996, bag type: pillow bag, bag weight: 250g/500g, max. bag length: 400mm, bag width range: 80mm-360mm, max. production speed: 40 cycles/min. Including clipping unit PS mako BS 600-CSP, year of construction: 2015, documentation available. On-site inspection is possible. Expected to be available from mid-January 2025. Hodpfx Aju Rc R Sehveni

Condition: ready for operation (used), Year of construction: 2021, A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible. Hnjdpfjx Ectuox Ahvei

Condition: ready for operation (used), A welding machine Pfaff including a rotary shear Kuris and an unwinding device MK is available. 1) Welding machine Pfaff 8309. 2) Rotary shear Kuris BOM 101. 3) Unwinding device MK Sewing Technology Systems. Documentation available. An on-site inspection is possible. The system is dismantled and ready for loading. Hjdew I E Dijpfx Ahvoni

Condition: ready for operation (used), A horizontal flow-wrapping machine used in the food industry is available. Packaging weight min/max: 80g/1000kg. On-site inspection is possible. Hsdjubbzzspfx Ahvoni

Condition: ready for operation (used), A Honsel bag making machine (packaging machine) is available. Working width: 500mm, wrapping closure: one-sided. Including cardboard flange feeder, folding table and deposit table with counter and feed. On-site inspection is possible. Hodpfx Aevtqrfshvsni

Condition: ready for operation (used), Year of construction: 2006, An automatic vacuum packaging machine Saccardo Arturo Figli with double chamber design is available. Sealing bars: parallel, number of bars: 2, bar length: 1300mm, max. lid internal height: 360mm, min. operating pressure: 5mbar, vacuum capacity: 2x540m³/h, pump type: PVR. Machine dimensions X/Y/Z: approx. 2700mm/1100mm/1300mm, weight: approx. 1000kg. On-site inspection is possible. Hsdpfxjygmbme Ahveni

Condition: ready for operation (used), Year of construction: 2014, A Fuji horizontal flow-wrapping machine with integrated shrink unit and conveying system is available. Packaging capacity: 1000 bags/min, max. film width: 600mm, infeed screw: approx. 2300mm, max. product dimensions X/Y/Z: 200mm/250mm/100mm, material: stainless steel, machine dimensions X/Y/Z: approx. 4800mm/1300mm/1500mm. Documentation available. On-site inspection is possible. Hsdpfx Ajvxi Uvshvjni

Condition: ready for operation (used), Year of construction: 2022, A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible. Hnedpfx Aoycwucehvoi

Condition: ready for operation (used), Year of construction: 2012, This is a side seam wicket bag machine Lemo Intermat 850 STN-CP Knoter, production type: wicket bags for bread, chicken, diapers, toilet paper, hygiene products and other types of wicket bags, number of lanes: single lane / lane wicket, processable materials: LDPE, HDPE, PP and recycled extracts, sealing width (bag length): 120-450mm, draw length (bag width): 200-850mm, gripper arm length: 600mm, max. linear speed: 65m/min, output capacity: 140 knot bags/min, max. number of bags per stack: 250, drive system: PLC-controlled, operator interface (terminal), print mark control, servo motor drive, nip feed rollers, sealing bars. Attachments and accessories: bottom gusset (only bottom gusset included), handle unit, longitudinal sealer, pre-sealer, angle sealer, cross sealer, handle punch, photo cell for printed film, automatic one-step conveyor (index conveyor), handle hole punch, G-gusset unit, V-gusset station, web guiding system 1800mm, anti-static bars, automatic labeling system. Machine is in good condition. Hsdpfxew U T T Eo Ahvjni