Bag forming, filling and sealing machine

Thom Spout Inserting Machine for Pre-Mad SI-900

Condition: ready for operation (used), functionality: fully functional, total height: 1,200 mm, total width: 580 mm, total length: 820 mm, input voltage: 230 V, The machine is designed for pitting plums, leaving the plums whole. Electrical connection: 230 V. Machine dimensions mm: 820 x 580 x h1200. Originally, the machine is equipped with 10 blades, but 2 blades were already lost when it was purchased, but this does not interfere with the operation process at all. Only the yield is slightly lower. Hodsw H I Tropfx Ai Nenk Productivity with 8 blades: 100 fruits / 1 minute Hole diameter: 30 mm. Machine weight: 100 kg.

Condition: used, Year of construction: 2016, Overview The filling line for glass bottles (non-refillable and refillable) was in operation at a small brewery in Germany until recently. The line is set up for 0.33l longneck bottles and can fill up to 2,500 bph. The machine is still in operation and can be inspected at any time after consultation. The bottle washer and the unpacker can also be purchased separately.  Technical details  Capacity: 2.500 bph Formats: set up for 0.33l longneck  Filling temperature: 6°C  Packaging:  0,33l Longneck in 24er folding box  0,33l Longneck in 24er modular box Individual machines / line components  New glass lifter | Füllmeister | - | 2016 Filler + capper | H&K | VVF 14/3 | 1966 2016 general overhaul (with pre-evacuation - new rotary ball connection - new stainless steel table - new electrics - new valve control cabinet in stainless steel design - 0.33 liter guide set - Sihi vacuum pump.) Seals on lifting cylinders and filling valves renewed 2023 Vacuum and relief valves fitted with new seals and springs 2023 Bottle unpacker | Joha | - 1982 Packing head for 24 bottles in modular crate  Bottle washer | Silmo | Praktika | 1983 Bottles per row: 12  Label discharger Labeler | Krones | Vinetta | 1999 Type 480-6-3-180      Labelling station for back labels Labelling station for breast labels and neck loops  Three glue pallets and gripper sponges each Glue pallets, gripper sponges and sponge roller at bottle discharge new 2023  Glue pump Krones Unipump-H with glue heater  Packer | Pexco | - | - 1 head for 24 bottles in module box 2016 new electrics installed and machine overhauled  Residual liquid and finish control | Miho | LC2000 | Residual liquid detection from bottle cleaning machine  Control of bottle mouth for crown cork/metal Incl. balancing screen from Silmo for visual control of the cleaned bottles Crate washer | Fleischer | - | -  For cleaning of plastic empty crates, in longitudinal run Module size: 300x400mm  Overhauled in 2016 Compressor | Alup | Allegro 19-10 | 2016  Oil-free 4897 operating hours  Transport Bottle transport: various conveyor belts + 90° bends  Crate transport/ roller conveyor: 2016 overhauled with stainless steel cheeks and feet Hnodpol Hx Rpofx Ai Nek

Condition: used, Year of construction: 2016, operating hours: 16,538 h, machine/vehicle number: R82, Used Tetra Pak A3 Compact Flex 300V Aseptic Carton Filling Machine + TSA21 straw applicator YOM 2007 –  Overview This used Tetra Pak A3 Compact Flex 300V aseptic carton filling machine is designed for high-efficiency packaging of liquid foods in the 200 ml Slim format. With a capacity up to 9,000 units per hour, it offers reliable performance for beverage production and industrial packaging operations seeking second-hand equipment with proven quality. Manufactured by Tetra Pak, a leading name in packaging machinery, this filler supports aseptic processing for sensitive products such as milk and juices, making it a strong choice for modern Usedbottlinglines and carton packaging applications. Engineered for advanced aseptic filling performance, the A3 Compact Flex 300V combines process control, operational safety, and consistent output. The machine has been maintained to align with contemporary standards, ensuring dependable uptime, product integrity, and efficient changeovers in demanding beverage production environments. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model/Version: A3 Compact Flex 300V Year of manufacture: 2016 Production speed: up to 9,000 units/hour Primary format: 200 ml Slim Filling technology: Aseptic carton filling Recorded operating hours: 10,538 h (approx.) TSA21 straw applicator system Product examples: Milk, juices Container type: Carton packages Advanced Automation & Control Systems The system features an integrated control panel and HMI for process monitoring, recipe handling, and production diagnostics. Automated sequences support aseptic startup, steady-state operation, and controlled shutdown. The platform incorporates safety interlocks and guarding to protect operators while enabling quick access for cleaning and routine service. Tetra Pak engineering ensures coordinated control of forming, filling, and sealing steps for stable, repeatable performance. Production Line Integration Capabilities This filler integrates seamlessly into complete beverage production and industrial packaging lines. It is suitable for upstream UHT/ESL processing and downstream case packing, conveyors, and palletizing. The 200 ml Slim format aligns with standard secondary packaging solutions, supporting efficient logistics. The machine can operate as a core element in a second hand used bottling line configured for aseptic cartons. Hnjdpfjxvpfrjx Ai Nek Machine Condition & Maintenance History Condition reported as perfect, with maintenance aligning the unit to modern standards for process control, performance, and operational safety. The machine is ready for operation and suitable for immediate deployment after installation and commissioning within the buyer’s plant. Operational Performance & Versatility Optimized for aseptic filling of dairy beverages and juices, this A3 Compact Flex 300V maintains product quality with controlled sterile conditions. Consistent sealing quality, accurate fill control, and stable carton handling result in reduced waste and high line efficiency. The platform is well regarded for reliability in high-demand beverage produc...

Condition: used, Year of construction: 2018, Overview The filler and capper was originally built by the Stork company and was overhauled by the ROBAK company in 2018. The machine can be used to fill still beverages into glass bottles. The machine is in excellent condition, currently dismantled and stored in a well-maintained environment. Technical data  Capacity: 7.000 bph Filler is prepared for 700 ml bottles 31,5mm aluminum cap The machine is missing a cap aligner and a cap slide and feeder. These should be made for a specific cap Hnsdpemnkhfsfx Ai Nek

Condition: used, Year of construction: 2018, Overview This isobaric filler was manufactured in 2018 by the Italian company Rizzolio Equipment S.r.l.. The unit was originally purchased for starting a new carbonated water production project, but the project was never realized. The machine has never been used, is still wrapped, and remains in as-new condition. It is immediately available. Technical data Capacity: 150–450 bph Formats: 0.5 L and 1.0 L glass bottles with pilfer cap (adaptable with proper adjustments and heads) Filling system: Isobaric Filling heads: 2 Power supply: 230 V, 50 Hz, single-phase, 2.0 kW Construction: Stainless steel Control options: Manual/automatic CO₂ purge & wash selector, vacuum pump control Hnjdsxa Apfjpfx Ai Nek

Condition: used, Year of construction: 2017, machine/vehicle number: LC560, Used Processing Line for small dairy products 2000 L/h Milk Reception and Initial Storage The Used Processing Line for Small Dairy Products 2000 L/h begins with a milk reception unit consisting of two Lactofreeze tanks and a receiving pump. Initially, operators channel raw milk into the tanks, where it remains chilled. As a result, the system ensures thermal stability before processing. Furthermore, this setup minimizes the bacterial load while allowing continuous transfer to the pasteurization stage. Pasteurization and Separation Next, the pasteurization phase uses a plate heat exchanger with a retention section and auxiliary systems, all rated for 2,000 liters per hour. Specifically, the pasteurizer rapidly heats and holds milk at a predefined temperature to eliminate pathogens. Then, the GEA WESTFALIA separator—rated at 3,000 L/h—performs cream separation. Simultaneously, the RANNIE homogenizer (1,000 L/h) reduces fat globules, thus enhancing emulsion stability and preventing cream rise. Fermentation and Coagulation Following thermal treatment, the milk proceeds to fermentation. Here, operators use an insulated double-wall fermentation tank with a 1,000-liter capacity and planetary agitator. Consequently, they maintain uniform bacterial activity and precise temperature control. In parallel, a 1,000-liter coagulation vat equipped with a planetary mixer initiates the curdling process. Both tanks ensure optimal protein structuring for yogurt, cheese, and cultured cream products. Cheese Processing and Draining After coagulation, the Used Processing Line for Small Dairy Products 2000 L/h continues with cheese processing. The system includes a 500-liter vat with a draining sieve and two cheese draining tables. Therefore, operators can efficiently handle large curd volumes. Moreover, these components simplify whey separation while ensuring sanitary compliance. Additionally, their design supports easy cleaning and cross-contamination prevention. Packaging Operations Once products are ready for packing, the line integrates semi-automatic and automatic solutions. First, a semi-automatic filler doses pasteurized milk into 1-liter bags. Subsequently, the yogurt cup filler automatically fills and seals 75 mm and 95 mm cups at up to 1,800 units per hour. Meanwhile, the rotary labeling machine by ETICAP (2004) applies both front and rear self-adhesive labels on cylindrical cups. Importantly, the machine ensures consistent alignment and adhesion. Date Coding, Thermal Control, and Final Packing In addition, a Videojet 1220 coder (2019) applies expiry dates onto each product via belt conveyor. Further downstream, a vacuum packaging machine handles cream and cheese portions. Thermal utilities include a 115–150 kW solid fuel boiler (2014) with dual transfer pumps. At the same time, an ice water tank (5,000 L, 2014) and a cooling unit (2018) maintain temperature consistency across the line. Laboratory and Accessories Alongside processing units, the Used Processing Line for Small Dairy Products 2000 L/h features a dedicated laboratory. Specifically, it houses analytical tools for quality control and milk analysis. Additionally, the line includes 300 plastic crates for storing and transporting yogurt cups. Hedpfew Ahg Rox Ai Nsnk System Shutdown and Storage Finally, operators shut down the line in September 2023. Before dismantling, they cleaned ...

Condition: used, Year of construction: 2013, Overview  The labeler was manufactured in 2013 by the German manufacturer Gernep. The machine was regularly maintained by OEM and had a full renovation in the end of 2019. The labeler is already dismantled. Technical details  Output: approx. 8,500 bottles/h   Formats 33 cl Vichy – Longneck – 30 cl BNR ; Neck, front and back label. 2 different front label format parts 33 cl longneck; 75 cl Bierre Belge bottle Corked; Neck, front and back label. Stainless steel bottom frame Rotation: clockwise Right to left bottle transport 5912 running hours Air driven glue pumps replaced by electrical driven glue pumps. Hnjdpfx Aorb Stmsi Nok

Condition: used, Year of construction: 2015, Overview This compact isobaric filler was manufactured in 2015 by Italian company Rizzolio. The Rizzolio RLV 2 ISO is designed for small breweries and artisanal beverage producers requiring precise CO₂ pre-injection and controlled filling of carbonated beverages such as beer. The machine has two filling heads and offers a robust, easy-to-maintain design. It is being sold because the owner purchased a larger filler. Recently, both electrical and mechanical parts were repaired. Technical data Capacity: Approx. 250 bph Formats: Adjustable for different bottle sizes Filling system: Isobaric with CO₂ pre-injection into filling bell Valves: 2 Max. working pressure: 5 bar Operation: Two manual levers for bottle lift and filling cycle; automatic gas compensation after first cycle Electrical supply: Single-phase, 220 V   Hjdpfx Aoxd Ez Eei Nenk

Year of construction: 2026, condition: new, Automatic gravity rotation filter, with stainless steel pump for liquid, equipped with a 0.3 mm strainer, single-phase pump, level sensor and control panel. -Material: AISI 304 stainless steel -Frame: stainless steel on 4 wheels -single-phase power for the filter -Stainless steel centrifugal pump ENOS 20 -0.3 mm filter -Fill level sensor -Control panel with emergency stop switch Technical data: Power requirement: 0.52 kW, single-phase Input height: 410 mm Capacity: 1000 kg/h Dimensions: Length: 800 mm Hjdpfetpxqnsx Ai Nenk Width: 1080 mm Height: 750 mm Weight: 70 kg Take a look at our website!

Condition: new, Year of construction: 2025, Sample system for filling liquids into bottles, closing them with a twist-off cap and then bottles labelling. Complete system consisting of: Bottle unscrambler; Filling machine with 4 filling heads for liquids with high or low viscosity; Lid closing machine for different sizes and shapes of lids including lid unscrambler; Labelling machine for bottles/cans/containers made of glass or plastic; Collecting table. The individual machines of the packaging line are connected to each other via conveyor belts, which gives the installation of the line high flexibility. -Specifications: Number of filling nozzles: 4; filling range: 100-1000ml; dosing method: by piston pump; accuracy: +/- 1%; bottle height: 15-400mm; bottle diameter: 25-200mm; speed: max. 1000 bottles/hour; label size: L25-300mm, W20-180mm, product contact parts are made from 304 stainless steel. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. The machine photo just shows the 4-head filling machine. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Hnjdev Nlbaopfx Ai Njk