Used Pendulum Impact for sale (1,587)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, overall weight: 666 kg, input voltage: 400 V, total width: 1,180 mm, total length: 1,180 mm, total height: 3,640 mm, filter area: 60 m², suction capacity: 6,000 m³/h, negative pressure: 2,300 Pa, input frequency: 50 Hz, input current: 11 A, Equipment: type plate available, CleanAirTower is an energy-efficient, stand-alone space filtration and ventilation system. The CleanAirTower space filtration and ventilation system is ideal for environments where localized fume extraction is not feasible. It is even more effective as a supplement to workstation fume and dust extraction systems. Undoubtedly, one of the device's key advantages is its impact on reducing heating costs in industrial halls. Air is drawn in, circulates around the device through a built-in fan, and then clean, warmed air is returned to the environment. Another advantage is the elimination of the need for pipeline installation. The device operates as a self-contained unit. Year of manufacture: 2023 Self-cleaning device (cleaned with compressed air during operation). Specifications: Pgjdpfjzv Nbtsx Afuor - Motor power: 5.5 kW - Performance: 6000 m3/h - Max. vacuum: 2300 Pa - Sound pressure level: 72 dB(A) - Number of filters: 3 - Filtration area: 60 m² - Dimensions (L/W/H): 1180 mm x 1180 mm x 3640 mm - Weight: 666 kg Stock number: 0009

Condition: new, empty load weight: 2,900 kg, maximum load weight: 7,600 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 890 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced transmission support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, at the rear, surcharge for front panel grid 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 folding supports at the rear, price: 1,900 euros, -- printing errors, mistakes and changes reserved, sample images --, more data under: !, More Details: ! Pgjdpfx Afezv Nckouer

Condition: new, empty load weight: 3,020 kg, maximum load weight: 11,380 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,480 mm, suspension: steel, tire size: 205/65 R 17,5, color: other, gearing type: other, front tire size: 205/65 R 17,5, rear tire size: 205/65 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 820 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum side boards, foldable and removable, removable stakes, 40 mm wooden floor, 3 stake pockets in the center for plug-in stakes 80 x 80, 6 lashing eyes, outer frame with lashing points, reinforced gearbox support with load and fast-travel mode, contour marking and side impact protection, fenders and spray suppression at the rear, surcharge for front panel grille 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load-bearing capacity per pair 8 tons, and 2 x folding supports at the rear, price: 1,900 euros, -- subject to printing errors, mistakes, and changes, sample images --, more data under: !, More Details: ! Pgsdpszv I Thofx Afujr

Condition: used, empty load weight: 4,430 kg, maximum load weight: 13,570 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2016, loading space length: 5,000 mm, loading space width: 2,440 mm, loading space height: 900 mm, loading space volume: 10 m³, total length: 5,000 mm, suspension: air, tire size: 385/65 22,5, tire condition: 100 %, wheelbase: 1,310 mm, color: red, Year of construction: 2016, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Vehicle number for inquiries: 40577 Schwarzmueller, 3-way tipper * Year of construction: 2016 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Tandem trailer * Air connection coupling head (red + yellow) * 15-pin connection plug * Lifting and lowering mechanism * Pendulum flap * Suspension: Air * Gross vehicle weight: 18,000 kg * Tare weight: 4,430 kg * Payload: 13,570 kg * Permissible gross vehicle weight: 18,000 kg * Axle manufacturer: BPW * Tire condition 1st axle: 100% – 100% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 100% – 100% - Tire size: 385/65 R22.5 * Wheelbase: 1310 mm * Tire sizes: 385/65 R22.5 * Internal dimensions: L=5000 mm, W=2440 mm, H=900 mm * Internal volume: 11 m³ * Pallet spaces: 12 * Upon request, we will gladly send you further pictures. Disclaimer: Subject to changes, prior sale, and errors. You can find more pictures and videos on our website. Our comprehensive service includes, for example: * Purchase/sale/rental of commercial vehicles * Quick and uncomplicated financing Pgedpfjyicldex Afuor * Application for all (export) documents * Ordering of export license plates/customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading/load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please ask our trained specialists; we will be happy to advise you.

Condition: used, Year of construction: 2001, Technical details: spindle passage: 25 mm Article: CNC sliding headstock automatic lathe Manufacturer: Tornos Type: Deco 2000/20 Year of construction: 2001 Control: Fanuc spindle diameter: D25 mm max. speed: 7000 rpm comb: 2 (X,Z,Y-axis) Front attachment: 1 (X,Z,S-axis) Loading magazine: Tornos Robobar SSF Chip conveyor: Hinged belt conveyor other: various accessories such as polygonal impact device, HF spindle Please, contact us for getting more information and pictures on mail(at) or Podpfjtwglasx Afujgr *

Condition: used, maximum load weight: 34,250 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 04/2027, Equipment: ABS, Excerpt of Equipment Braking System * Complies with ECE-R13 Electrical System * Complies with ECE-R48 * The Kögel superstructure guidelines must be observed! They can be accessed at [website address]. Frame / Chassis Frame * Made of high-quality steel, but without an outer frame * Coupling plate with a 2-inch kingpin according to DIN 74080 / ISO 337 * With cross member and container locking mechanisms for accommodating: a) 1 x 40' High-Cube container (frame extended) * b) 2 x 20' ISO containers (frame extended) * c) 1 x 30' ISO container flush with the rear (frame extended) * d) 1 x 20' ISO container flush with the rear (frame retracted) * e) 1 x 20' ISO container in the middle (frame retracted) * 4 pairs of heavy-duty lashing rings * Frame extension at the rear, extendable by approx. 1,370 mm, load capacity 5,800 kg, with spiral cable * Length adjustable via 1 pneumatic cylinder, low-maintenance guidance on special plastic sliders and 2 extension rollers * Automatic pneumatic locking of the extension Suspension * Axle lift mechanism on the axle * Control of the axle lift fully automatic, load-dependent * Starting aid: Activation via 3x brake, 30% overload up to a speed of 25 km/h * Operation on the chassis via a switch * Also possible from the driver's cab (switch in the cab is necessary - PIN 12) * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, ET 120 Psdpfozkx Hnjx Afusgr * Air suspension with approx. 180 mm suspension travel Tires * 6 x 385/55 R 22.5, 160J (manufacturer of our choice) * 6 steel rims 22.5 x 11.75, offset 120 mm (ET 120) Chassis Components * Kingpin supports (manufacturer at Kögel's choice) mechanically with leveling foot, 24 t lifting capacity * Single-sided operation on the right side of the direction of travel * Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires consisting of * 3 pairs of semi-circular fenders with mud flaps * 2 support wedges with holder * Lateral protection device, according to ECE-R73 * Closed underrun protection made of square steel tube according to ECE-R58 with an * protected lighting carrier arranged above it. Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air Suspension System * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638, (without connection cables) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * Air suspension system incl. 1 lifting and lowering valve, mounted on the left side in the direction of travel in front of the axle unit * 2 tamper-proof coupling heads at the front ISO 1728 * Air tanks for brake system and air supply made of steel (EN 286-2) * Rear impact guard Steel rear impact guard, solid, on the rear end crossmember Electrical / Electronic System * Lighting carrier made of steel, arranged above the underrun protection KÖGEL LUXIMA Premium Package, consisting of * LED license plate lighting * LED side marker lights and reflectors at the front * Flashing LED side marker lights * Superseal and bayonet connectors for the lights * 2 LED outline lights with arms, mounted on multi-chamber tail light * 2 LED multi-chamber tail lights (without LCG) * Front connector 15-pole ISO 12098 (without connection cables) * Complies with vehicle class FL * AT Information Systems Kögel Telematics System Basic * Trailer incl. location monitoring,

Condition: used, maximum load weight: 35,750 kg, overall weight: 39,500 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment list: Complete equipment available upon request. Braking system * Complies with ECE-R13 * Electrical system complies with ECE-R48 * The Kögel superstructure guidelines must be observed! They can be accessed at [website address] Chassis * Chassis frame made of high-quality steel * However, without outer frame * Coupling plate with a 2-inch drawbar eye according to DIN 74080 / ISO 337 * With cross member and container locking mechanisms for accommodating * a) 1 x 40' High-Cube container (frame extended) * b) 2 x 20' ISO containers (frame extended) * c) 1 x 30' ISO container flush at the rear (frame extended) * d) 1 x 20' ISO container flush at the rear (frame retracted) * e) 1 x 20' ISO container in the middle (frame retracted) * 4 pairs of heavy-duty lashing rings * Rear frame extension, extendable by approx. 1,370 mm * Load capacity 5,800 kg, with spiral cable * Length adjustable via 1 pneumatic cylinder * Low-maintenance guidance on special plastic sliders and 2 extension rollers * Automatic pneumatic locking of the extension Suspension * Axle lift mechanism on axle 1 * Axle lift control fully automatic, load-dependent * Starting aid: activation via 3x brake, 30%, overload up to a speed of 25 km/h * Operation on the chassis via switch, also possible from the driver's cab (switch in the cab required - PIN 12) * Three-axle unit SAF INTRADISC * with disc brakes Ø 430 mm, ET 120 * Air suspension with approx. 180 mm travel Vehicle tires * 6x 385/55 R 22.5, 160J 6 steel rims 22.5 x 11.75 * Offset 120 mm (ET 120) Chassis components * Landing gears, mechanically operated with level foot, 24 t lifting capacity * Single-sided operation on the right-hand side when driving * Splash protection system (spray suppression) in accordance with Regulation (EU) No. 109/2011 for three-axle unit with 22.5 tires * consisting of: 3 pairs of semi-circular mudguards with mud flaps * 2 chocks with holder * Lateral protection device, according to ECE-R73 * closed underrun protection made of square steel tube according to ECE-R58 with an * illuminated marker board arranged above and protected * Height of the underrun protection profile min. 120 mm, designed for increased test forces Brake / Air suspension system * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connection ISO 7638, (without connection cables) * Parking brake as spring brake * external pneumatic connections and external EBS diagnostic connection via ISO 7638 connection * Air suspension system including 1 raising and lowering valve * mounted on the left-hand side when driving, in front of the axle unit * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for brake system and air supply made of steel (EN 286-2) Rear impact protection * Steel rear impact protection, solid, on the end cross member at the rear Electrical system / Electronics * Light carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of * LED license plate lighting * LED side marker lights and reflectors at the front * flashing LED side marker lights * Superseal and bayonet connectors for the lights * 2 LED outline lights with arm * mounted on multi-chamber tail light * 2 LED multi-chamber tail lights (without LCG) Pgedpjzkx Ifjfx Afujr * Front connection 15-pole ISO 12098 (without connection cables) * Complies with vehicle class FL * AT Information Systems Kögel Telematics System Basic * Trailer including location monitoring

Condition: used, Year of construction: 2002, operating hours: 1,628 h, 2002 | Case 1825B | Used Wheeled Skid Steer | 1628 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 4500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 35 inspection points 21 approved ✅ 7 imperfect ℹ️ 7 issues ⚠️ 📌 Inspector's Comment: Poor general condition of the telescopic. The left lifting cylinder does not hold the load and is leaking. The seat is damaged. The right drive control is difficult to operate. The rigid piping is damaged. The right rear tire needs to be replaced. Impact on radiator and engine hood. Unable to start and keep running without booster. Missing a nut on the right rear rim. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41114 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Podpfx Aezv Emxofusgr ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2011, operating hours: 4,116 h, 2011 | Dieci Pegasus 45.21 | Used Telescopic Forklift | 4116 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 80600 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 57 inspection points 55 approved ✅ 2 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The state of preservation of the rotary telescopic is bad. Significant wear on the seat base, impact on rigid piping on boom. The left rear tire is out of service. Engine noise when starting cold. Support for the left rear light is damaged. The auxiliary remote control is heavily damaged. One of the two batteries is out of service. Noise in the transmission. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "41109 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Pedszv Emrjpfx Afuegr ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, empty load weight: 6,100 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2027, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2022, ref: F1062689 Equipment: * Air connection: Red/Yellow connector, * Power connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, * Lift axle: 1, * Toolboxes: 2, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Sliding cover, * Side sliding tarpaulin, * Multilock, * Floor: Plywood floor, * Recessed strip (aluminum): 32 VIN: WKESD000001062689 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Psdpszw N Nmsfx Afuegr Internal width: 2.48m Height: 4.02m Internal height: 2.7m

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, The bunker of the PRO-150 Mobile crushers has been developed by our engineers as user-oriented to operate with high-level efficiency. The vibration speed of the vibrating feeding bunker is easily guided by the automation system which can be adjusted manually. This feature prevents the bunker from wearing out and provides the user with longer and more efficient usage. In order to avoid any performance loss due to the damp or muddy material processed in the crusher plants, the wobbler feeder contains all the necessary qualities. While the wobbler feeder has potential to process without any problems for many years. Aslo stands out with easy maintenance feature as well. The poor quality of material separated in the wobbler feeder is thrown into the bypass belt and therefore user get a high-quality final product. Additionally; if desires, the materials falling into the bypass can be sent directly to the screen thanks to the reversible conveyor in the bypass system under the wobbler feeder. FABO primary impact crushers are designed to crush soft and medium hard stones with high rotor speed. It is considered as the heart of the mobile system. With the help of high-speed rotating rotor crushing hammers, the products poured from the feeder are crushed with the help of pallets. Hydraulically adjustable rods allow the products to be obtained in the desired size. FABO folding type hydraulic belts send the right product to the crusher and the stock area according to customer requests after sorting through the vibrating screen. With foldable structure, the plant minimizes dimensions of the machine for the transportation. The number of stock belts can change due to customer requests. 10 mm EP 125 4-ply belt elastics moving on twisted sheets perfectly transport the aggregate coming out of the screen to the area desired by the user. Belt elasticity, which produced resistant to wear, offers many years of life without letting customer down. The flap system is a special system that allows the directly crushed material to be taken from the crusher with the help of the pre-stock belt without being screened in the mesh. Pedpfozw E S Dox Afuegr The plant minimizes production time with its unique location just in front of the screen.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012535, empty load weight: 3,860 kg, maximum load weight: 14,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2026, next inspection (TÜV): 06/2027, loading space length: 7,750 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: silver, Year of construction: 2026, Demonstration vehicle - Please note: images shown are archive photos. The vehicle may currently be in use! Pedpfx Aezw Ep Nefujgr #Chassis – centre-axle trailer - Fine-grain steel welded construction - Outer frame slightly angled, new design, featuring a "Load Lock" profile for lashing strap attachment - 1 pair of geared landing legs front, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 1 pair of geared landing legs rear, semi-round base plate, shock-compensating foot, single-side operation, direction of travel right - 2 wheel chocks with holder - Side impact protection, aluminium - Underrun protection, steel - Quarter-shell mudguards - 2 plastic tool boxes with drawer and insert shelf, w=650 / h=520 / d=670 mm, lockable with a padlock #Towing gear – centre-axle trailer - Drawbar with certified 50 mm towing eye, general haulage version - Lower coupling head on drawbar - Folding bracket with spring support on drawbar, guiding the connecting cables to the truck #Axles + suspension - SAF disc-brake axles, 430 mm disc diameter - "Axles/chassis laser-measured" reducing tyre wear and fuel consumption - Air suspension with lift & lower valve #Wheels and tyres - 385/65 R 22.5", manufacturer's choice - Steel rims, factory silver #Braking system - Two-line compressed-air braking system - Spring-loaded parking brake - Vehicle stability system - Duomatic connection front, with connecting line to towing vehicle, direction of travel right - EBS electronic braking system, EBS connector front with connecting cable #Electrics - 24V multi-chamber LED lights, yellow LED side marker lights, LED number plate light (note: false fault warnings possible with certain towing vehicles despite correct function) - 2 white position lights front - 2 white/red outline marker lights rear - 1x 15-pin plug front with connecting cable, direction of travel right - Reversing camera system, colour flat-screen monitor, wireless link, screen with suction-cup mount, powered via 24V vehicle socket #Floor - Phenolic-coated plywood, approx. 30 mm, high point-load capacity - Note: floor warping possible due to weather - "Premium floor sealing", sealed all round - Platform length approx. 7,750 mm #Front wall / front corner posts - 25 mm aluminium hollow-section, 1,950 mm high, corner posts steel, reinforced profile, +2 additional centre supports - Front wall internally lined with 1,250 mm high phenolic-coated plywood #Centre stakes - 2 pairs of folding stakes at side-board height, foldable and removable #Side boards - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, without tarpaulin rail #Rear wall / rear corner posts - 1 pair of folding stakes at side-board height, foldable and removable - 25 mm aluminium hollow-section, 700 mm high, foldable and removable, with internal folding step #Country of registration / plates - Warning plate ECE-70 - Warning plate "A" for waste transport, foldable - ADR warning plate at rear, foldable #Paint finish - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation"

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,800 kg, maximum load weight: 28,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,480 mm, total length: 13,200 mm, total width: 2,550 mm, total height: 2,645 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Bespoke Transport Solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis – Haulage Semi-Trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Mounting position for warning boards at the rear - Outer frame with "Load-Lock-Profil" for lashing strap attachment - 24 t twin-speed landing legs, single-side operation - Ferry lashing eyes, marked yellow, incl. 2 at the rear as tow eyes - Container locking: 4 pairs of twist locks recessed in the floor for 2 x 20 ft or 1 x 40 ft containers - Stake pockets recessed in the outer frame, 80 x 80 mm internal size - Stake pockets recessed centrally in the floor, 80 x 80 mm internal size - Removable stakes W=80/D=80/L=1200 mm, hot-dip galvanised - Lashing rings recessed in the outer frame, 5 t each - 2 tool boxes, W approx. 1230 / H approx. 450 mm, enclosed, fitted across the full width ahead of the axles in place of side underrun protection, foremost lock insertable as pin type - Cross lashing/stake rails recessed in the floor across the full width to the outer frame, approx. 100 mm high, with 20 mm round steel bars top and bottom, spacing approx. 60 mm, closed at the bottom with an angle plate, open downward on one half, for lashing and inserting 80 x 80 mm stakes - Open compartment for warning boards, subject to technical feasibility #Axles + Suspension Pjdpfszb Iu Dsx Afuegr - SAF disc-brake axles, laser-measured axle/chassis assembly to reduce tyre wear and fuel consumption - Air suspension - 1st axle automatic lift axle, incl. forced lowering and start-off aid, activated by braking 3 times - 2 ride heights, adjustable via hand button: 1 x for coupling height 1120 mm, 1 x for coupling height 1200 mm #Braking System - Two-line air braking system - Colour-coded pipework for easy servicing - Spring-brake parking brake - 2 anti-mismatch coupling heads at the front - EBS electronic braking system with EBS socket at the front - Lift-and-lower valve - Vehicle stability system #Wheels and Tyres - 385/65 R 22.5", steel wheels, factory silver #Electrics - 24 volt - 4 x three-chamber lights, side-mounted yellow LED lighting - 2 white LED front position lights - 2 white/red LED outline marker lights at the rear - 2 x 7-pin and 1 x 15-pin anti-mismatch sockets at the front, without connecting cable - Beacon light with bracket, switched via side lights (lamp removable) - 2 pairs of warning boards, double LED-illuminated, extendable to 4500 mm and removable via plug connector, with additional bracket at the rear - Additional 7-pin socket (to ISO 1724) in the rear underrun protection #Floor - Screen-printed plywood flooring approx. 30 mm thick, cross joints with omega insert, on longitudinal bearers for high point-load capacity, forklift axle load up to 7100 kg max. #Front Wall / Front Corner Posts - 25 mm aluminium hollow profile, 1650 mm high - Corner posts in solid steel design - Front wall additionally fitted internally with 1250 mm high screen-printed plywood panel - "Crash-Blocker": steel impact protection internally at the bottom, approx. 140 mm high - Storage compartment for 80 x 80 mm removable stakes inside the front wall

Condition: new, Year of construction: 2026, color: grey, overall weight: 15,000 kg, maximum load weight: 13,000 kg, empty load weight: 2,010 kg, loading space volume: 12 m³, loading space width: 2,380 mm, loading space length: 6,500 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, flap, lashing eyes Body: Roll-off container with drive-over rear flap, approx. 12 m³, spring-assisted. ARCHIVE IMAGES. Roll-off container according to DIN 30722-1, greasable external rollers, floor 5 mm, walls made of 3 mm steel, frame spacing 750 mm, continuous tarpaulin and net hooks, galvanized stern-side climbing rungs in compliance with UVV, foldable and spring-assisted pendulum flap, 8 x 2.5 t lashing eyes (4 per sidewall) and 2 x 5 t lashing eyes on the front wall. Lashing eyes in the floor available at extra cost. Painted in RAL 7016 anthracite grey! ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale, and errors! Pgjdpfx Afsyrt Rxeuer

Condition: new, Year of construction: 2025, color: grey, overall weight: 15,000 kg, maximum load weight: 13,000 kg, empty load weight: 2,010 kg, loading space volume: 12 m³, loading space width: 2,380 mm, loading space length: 6,500 mm, loading space height: 750 mm, gearing type: other, driver cabin: other, Vehicle location: incoming / in transit, steel construction, flap, lashing eyes Pgjdpfevhinuex Afuor Build: roll-off container with drive-over rear flap approx. 12m³, spring-assisted, ARCHIVE PICTURES roll-off container according to DIN 30722-1, greaseable exterior rollers, floor 5mm, walls made of 3mm steel, frame spacing 750 mm, continuous tarp and net hooks, galvanized climbing irons at the front according to UVV, fold-down and spring-assisted pendulum flap, 8 x 2.5 t lashing eyes 4 per side recessed in the floor, 2x lashing eyes at the front wall, in RAL 7016 anthracite gray! All information without guarantee, as in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, Subject to alterations, prior sale and errors!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33903000214, empty load weight: 7,850 kg, maximum load weight: 31,150 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 14,905 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: black, #Chassis – General Haulage Semi-Trailer - X-tra Long, ~14,700 mm internal length - Lashing ring prep in floor sides (max. 13 pairs), 6 pairs fitted rear - 24t two-speed landing gear, reinforced, loaded coupling, single-side operation, half-round foot - Pull-out ladder at rear - Side door retainer - Steel rear underrun protection - Rear mud flaps full width; anti-spray flaps to EC standard - Rear impact protection - Aluminium ladder ~3,550 mm, side bracket - Plastic toolbox w/ drawer & shelf, 650x520x670 mm, padlockable (lock not included) - Spare wheel carrier for 1 spare wheel, with wheel fixing kit - 1 spare wheel #Axles & Suspension - SAF disc brake axles, 430 mm disc diameter, axle stop on 3rd axle, bolted/clamped - Laser-aligned axles/chassis – reduces tyre wear and fuel consumption - Air suspension with bellows pressure gauge #Braking System - 2-line air brakes, colour-coded lines for easy service - Spring-loaded parking brake - 2 anti-mismatch coupling heads front, no connecting line - EBS, socket front, no connecting cable - Towing vehicle must ensure ABS effectiveness - Lift/lower valve on control panel, front left ahead of axles - Driving stability system - AAC Basic auto axle-load relief (last axle), manoeuvring aid to 20 km/h, manual off - Trailer info centre & EBS CAN-bus axle-load display (cab): loads, mileage, diagnostics (not calibrated; pre-equip.) - TPMS Haldex tyre monitoring via EBS (truck pre-equipped) - Additional air connection rear left, quick-release #Wheels & Tyres - 385/55 R22.5" - Polished alloy wheels, AlexRims #Electrics - 24V multi-chamber LED lights w/ resistor, yellow side LEDs, LED plate light, Aspöck EcoLED 2 - Premium LED side marker lights, 20 LEDs/light, optionally coupled to yellow LEDs (flashing) - 2 white LED front position lights - 2 white/red LED outline marker lights rear - 1x 15-pin socket front, no connecting cable - LED work lights both sides, via reversing light - 2 additional rear LED work lights, via reversing light #Sliding-Floor Hydraulics - Hydraulic cylinder w/ sliding mechanism in floor, 2-circuit hydraulics - Forward/reverse switching, electric, corded remote; controls front left ahead of axles - Sliding-floor power via side/parking light - Hydraulic operation via truck PTO - Hydraulic connection, hose at front wall, HDK screw coupling, NW 48 mm - 2-circuit hydraulic system required; rec. 110 l/min, 250 bar, min. tank 100 l #Sliding Floor - Sliding floor w/ rear wear plate, stainless steel (V2A) - Aluminium floor boards, 8 mm profile, ribbed - Aluminium end caps #Body - Aluminium box body, abrasion-resistant; alu hollow-section walls, welded frame w/ reinforcement - Rear wear plates on side walls ~3000x1900x4 mm, fully welded - Front service door left, steps both sides - Sliding wall (easier unloading), reinforced tarpaulin flaps below, rail scraper - Rear wall: alu hollow-section 2-leaf door (1/2–1/2), U-seal edging, 2 rotary bar locks, mech. lock (rear-left), pivoting top cross bar, Fliegl "I-Lock", padlockable - Rear wall with pneumatic safety lock, ahead of axles left (replaces mechanical lock) Podszw Dygopfx Afusgr - Standing platform, ladder access both sides, handrail, for roof tarpaulin operation - 4 removable, pivoting reinforced cross bars for tarpaulin support - Reinforced roller tarpaulin ~900 g, one-side release, 2 longitudinal + 3 ratchet straps, hook/rope fixing, stops right

Year of construction: 2020, condition: used, This listing is for Agilent MagnisDx NGS Prep System The unit is in full working condition and ready for immediate use Podpfszw Dv Iex Afujgr The Agilent MagnisDx is an automated benchtop system for NGS library preparation and target enrichment. It supports automated workflows using Agilent SureSelect chemistry, with barcode checking, pre-set protocols and integrated workflow automation for reproducible results Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized

Condition: used, functionality: fully functional, machine/vehicle number: VAVKSK339SZ542526, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 06/2027, loading space length: 7,350 mm, loading space width: 2,330 mm, loading space height: 1,470 mm, loading space volume: 24 m³, total width: 2,550 mm, suspension: air, tire size: 385/65R22,5", tire condition: 100 %, color: grey, Year of construction: 2025, The images are archive photographs; the vehicle may still be in use. #Chassis -Welded steel chassis construction with rear tipping axle in weight-optimised lightweight design -Replaceable 2" kingpin -Frame designed for an unladen fifth-wheel height of approx. 1200 mm – approx. 1250 mm with air-suspended tractor unit -Support legs: mechanical steel landing legs, 2 x 12 t, single-side operation (right) #Axles -SAF-Intradisc-B9 axles with disc brakes / 430 mm -3 axles -Front axle automatically liftable = raises and lowers depending on load; also with forced lowering incl. integrated speed-limited start-off aid -Note: loading height/overall height increases by approx. 50 mm! #Electrics -15-pin socket: PIN 12 -7-pin socket: PIN 6 (positive-switched) #Wheels -6 tyres 385/65 R22.5", 6 aluminium wheels #Braking system / Suspension -Two-line air brake system -Brakes: Knorr make -EBS system -Brake/air connections with 2 single coupling heads, yellow/red -EBS/ABS socket, front -Electronic air suspension with automatic lowering device via induction switch and additional lowering lock-out via rotary switch on the semi-trailer -Without raising and lowering system -Without connecting hoses/cables to the towing vehicle #Assistance / Safety systems -Axle load display via EBS CAN bus signal, shown on the display in the cab -Tyre pressure monitoring with sensor in the wheels, shown on the display in the cab #Body -Steel body with reinforced floor plate made of special steel HB 450 (Hardox or comparable material) and reinforced top rail -Floor thickness 5 mm = continuous floor plate, wall thickness 4 mm -Front and rear walls sloped, flush all round at the top -Access steps inside the body, front left -Steel pivoting tailgate with recessed mounting and automatic mechanical 2-hook central locking, tailgate with internal discharge chute #Hydraulics -Without hydraulic connecting lines to the tractor unit -High-pressure front hoist for rear tipping #Tarpaulin -Plastic roller tarpaulin incl. aluminium tube with hand crank, without customs seal -1 removable cross support and stop bracket on the right for the roller tarpaulin -Locking device for the rolled-up tarpaulin -Tarpaulin fastening on the left (direction of travel) with 3 mounting brackets and central tensioning device at the front, without tensioning straps (quick-release fastener on the top rail); tarpaulin colour similar to RAL 9006 white aluminium Pgedpfozm Ipkex Afuor #Lighting / Electrics -24-volt lighting system -2 full-LED multi-chamber rear lights -2 LED position lights, front -2 LED outline marker lights, rear -Flashing LED side marker lights -2 LED number plate lights -2 x 7-pin sockets -1 x 15-pin socket -Without electrical connecting cables to the tractor unit #Accessories / General -3 pairs of plastic individual-wheel mudguards, without spray suppression, foldable mud flaps at the rear -Folding aluminium trapezoidal rear underrun protection, unpainted with steel bracket, in accordance with EU directive -2 wheel chocks -1 tow hook bolted to the frame member, on the right (direction of travel) -Noise dampers = rubber pads -Steel standing platform with aluminium safety grating, guard rail and foldable access ladder on the left (direction of travel), bolted to the chassis frame at the front -Without side impact protection Please note: archive photographs

Condition: used, empty load weight: 5,276 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2021, loading space length: 7,500 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, suspension: air, tire size: 385/65 R22,5, color: yellow, Year of construction: 2021, mileage: 551,511 km, Equipment: ABS, Unladen weight: 5,276 kg, gross vehicle weight: 36,000 kg, cargo area (L W H): 7,500 mm x 2,440 mm x 1,350 mm. Tire size: 385/65 R22.5, cargo volume: 24 m³. 1st axle: , 2nd axle: , 3rd axle: , air suspension, foldable underrun protection, front lift axle, electronic braking system (EBS), pendulum tailgate (overlapping), sliding roof tarpaulin, platform, connection plugs 1x15-pin and 2x7-pin, antispray, light alloy rims. Our full range of vehicles can be found at . Interested in financing? With our Value Added Services, we offer you tailor-made financing solutions, full-service and telematics services. We are happy to advise you. Pedpfxsxz Huno Afuegr

Condition: used, Year of construction: 2008, functionality: fully functional, 1 x used 72/80-page web offset printing press Manufacturer: manroland Model: Lithoman IV Year of construction: 2008 Web width: 2060mm Section length: 620mm Cylinder circumference: 1240mm Max. speed: 42,500 cph Running direction: left-to-right Description: 1 x web winder MEGTEC DLC 3200 with web feed AUROLOAD 4 x printing units manroland with PPL and Baldwin Impact Fusion blanket washing system 1 x dampening system technotrans delta.d 400W 1 x hot air dryer Contiweb Ecoset/T 15.3m with integrated afterburner (retrofitted in 2020) 1 x ink density control system GMI ColorQuick 1 x cut register control manroland CutCon 1 x color register control manroland 1 x superstructure with 5 lay units 1 x 2nd feeder (baby feeder) 1 x folding unit PFI 5S, 2:5:5 with positive feeder and magnetic brake (MT folding) 1 x saddle stitcher Tolerans 1 x cooling unit Axima i-Cool Pgedjzvyxcspfx Afujr 1 x control system PECOM-X optional: 1 x disposal line RIMA System with cutting modules RS840, cross-lay unit RS36S and RS400 robot/palletizing system

Condition: used, empty load weight: 7,230 kg, maximum load weight: 28,770 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2016, next inspection (TÜV): 03/2027, loading space length: 13,624 mm, loading space width: 2,469 mm, loading space height: 2,721 mm, total length: 25,500 mm, total width: 40,000 mm, total height: 138,600 mm, suspension: air, tire size: 385/65 R22,5, color: white, Year of construction: 2016, front tire size: 385/65 R22,5, rear tire size: 385/65 R22,5, brakes: other, emission class: none, Equipment: ABS, ABS, axle manufacturer Krone axles, color white, suspension air/air, lifting and lowering mechanism, portal door, brake disc brake, fixed side impact protection, spare wheel holder without wheel, double-deck without beams, 2x 7 + 15-pin electrical connections, document box, side work lights (LED), anti-splash guard, 2x reversing lights, 4-point twist lock, recessed cargo securing rail, ferry lashing. Pgedpfxszwx Ile Afujr

Condition: new, Year of construction: 2026, CORMAK OS3500 is a mobile welding fume extractor designed for effective removal of welding fumes and exhaust gases directly at the source. The unit combines high suction power with a large airflow rate, while the sound-insulated fan chamber ensures quiet, smooth operation. Additional advantages include an integrated pneumatic filter cleaning system, airflow regulation at the suction inlet, and a robust, industrial-grade construction. Automatic Filter Cleaning – Consistent Performance The CORMAK OS3500 is designed with user convenience and long-term performance stability in mind. For this reason, it is equipped with an automatic pneumatic filter cleaning system. In practice, this means that accumulated contaminants are regularly knocked off the filter without the need for frequent manual intervention. The result is twofold: first, the extractor maintains a constant level of efficiency; second, service downtime and operating costs are reduced. In a production environment, this is crucial—any unplanned interruption or loss of suction affects workflow and the quality of working conditions at the workstation. Adjustable Suction Power Tailored to the Task Another key advantage is airflow regulation at the suction inlet. This solution allows the extraction force to be adjusted to actual working needs: different for short spot welds, different for long continuous welding, and different again for grinding operations. Regulation at the inlet enables quick, operator-friendly adjustment without time-consuming configuration changes. This makes it easier to maintain a balance between effective extraction and operator comfort (for example, when working with smaller parts where excessive suction could hinder handling). Robust Construction and Mobility The OS3500 is designed for everyday use, which is why great emphasis has been placed on build quality. Its solid construction performs reliably in workshop and industrial environments—where equipment is frequently moved, operates for many hours a day, and must withstand intensive use. Its mobility allows the extractor to be used at multiple workstations without investing in a permanent installation throughout the entire hall. This is a practical solution for both companies with several workstations and those that frequently change layouts or carry out varied jobs. Pgodpfxsygt Uts Afujr Wide Range of Applications In practice, the OS3500 is suitable wherever air contaminants are generated: welding (MIG/MAG, TIG), metalworking, grinding, and other processes producing dust and fumes. Its purpose is to improve working conditions by reducing pollutants in the operator’s breathing zone. This solution positively impacts employee health, work comfort, and the perception of the facility as a modern and safe workplace. Technical Specifications Model Airflow (m³/h) Pressure (Pa) Filter Efficiency (%) Power (kW) Voltage (V) Weight (kg) OS2400 2400 2000 99.9 2.2 400 80 OS3500 3500 2000 99.9 3.0 400 122 *The power cable and plug are not included due to varying connection infrastructures and customer requirements.

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Used impact mill for the production of crushed stone and graded aggregate, feed size 20-100 mm, capacity approx. 40 m³/h. Pgodpfx Aezwt Uaofujr

Condition: used, mileage: 78,120 km, power: 44 kW (59.82 HP), first registration: 05/2016, fuel type: electric, overall weight: 2,175 kg, next inspection (TÜV): 06/2026, color: grey, gearing type: automatic, number of seats: 2, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), Renault Kangoo Maxi Z.E. Electric 44kW/60hp Automatic in Taupe Grey---- * Vehicle battery included / no rental battery * Sound & Climate package including air conditioning * Audio system: Radio with CD player (MP3 compatible, Bluetooth), audio/radio remote control on the steering wheel, Bluetooth hands-free system, USB port including AUX-IN port (Plug & Music), interior filter: pollen filter * Plastic floor in the cargo/loading area * Rear parking assist * Cargo area partition (fixed) * Wheel arch lining in the cargo/loading area * Sliding door on the left and right without windows * Airbag, passenger side * Side airbag, front * Front left seat, height adjustable * Rear window tinted (Privacy Glass) Additional features: Airbag, driver side, exterior mirrors, electrically adjustable and heated, outside temperature display, on-board computer, electronic brake force distribution, electric motor 44 kW, sound simulator (external sound), seat belt pretensioners, rear tailgate doors without glazing, body/structure: van, adjustable headrests, steering column (steering wheel) height adjustable, model upgrade, wheelbase 3081 mm, wheel covers, spare wheel in driving condition, sliding door on the right without windows, side impact protection, side protection strips, front seat belts, height adjustable, seat cover/upholstery: fabric, lashing eyes in the cargo/loading area floor, lashing eyes in the cargo area on the side ----Vehicle in ready-to-drive condition with various signs of wear. Sale is preferably to commercial businesses or for export! ----Fixed price!----Errors and changes excepted! Pjdpfx Afszwrtzsuegr

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, suspension: air, tire size: 235/75 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Loading height approx. 860 mm, vehicle interior width approx. 2,480 mm, front panel made of galvanized steel, 600 mm aluminum sideboards, foldable and removable, removable posts, 40 mm wooden floor, 3 post pockets in the center for plug-in posts 80 x 80, 6 tie-down points, outer frame with tie-down eyes, reinforced gearbox support with load and fast gear, contour marking and side impact protection, mudguards and spray suppression, rear, surcharge for front panel grille 1,600 mm high (perforated sheet metal), price: 1,400 euros, surcharge for aluminum ramps, load capacity per pair 8 tons, and 2 x folding supports at the rear, price: 1,900 euros, -- printing errors, errors and changes excepted, sample images --, more data at: !, More Details: ! Pgedpezvpcdofx Afuor