Used Pendulum Impact for sale (1,434)

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: M11360*17766, Year of construction: 2018, load capacity: 12,000 kg, lifting height: 6,500 mm, The technical data are taken from the original order confirmation. The seller cannot guarantee that these correspond to the current condition. TECHNICAL DETAILS Lifting capacity: 12,000 kg at a load center of 1,200 mm Mast: Duplex standard Lift height: 6,500 mm Collapsed height: 4,895 mm Extended height: 8,100 mm Tilt: 5° forward / 10° backward MACHINE DETAILS Dimensions (L x W x H): 5,205 x 2,550 x 2,905 mm Wheelbase: 3,500 mm Engine: Volvo TAD-871-VE / 6-cylinder / eco-friendly engine with CAN bus (EU Stage IV), 185 kW at 2,200 rpm, 1,160 Nm, displacement 7.7 L STEINWEG Stone Stack Grab Type HG1T-6000S TECHNICAL DETAILS Clamping range: 0.96–1.00 m Opening range: approx. 0.6–1.3 m Clamping height: 1.3 m Lifting capacity: 6,000 kg Double clamp bars: 1 pair, with cushioned plastic jaws, length 2.3 m Mounting: Pendulum suspension EQUIPMENT Manufactured in a robust and clean welded construction Splayed clamp arms mounted rotatably With hydraulic cylinders, required valves, pipes, and fittings Including oil pressure manometer and connection hoses to the rotator Additionally: one pressure gauge mounted 180° opposed to the standard manometer LIFTING ARM & EXTENSION TECHNICAL DETAILS Extension: 1.6–2.1 m Lifting capacity: 8,000 kg at an outreach of 1.6–2.1 m EQUIPMENT 1 piece forklift lifting arm, twin beam, with endless rotator and pendulum suspension Including connection hoses to forklift 1 piece hydraulic extension with telescopic cylinder 1 stabilizer (2 pcs) for pendulum motion compensation Integrated side shifter in slide guides, travel: 250 mm RADIO PRESSURE MONITORING (Clamping Pressure) Radio frequency: 868.4 MHz Ambient temperature range: -30°C to +85°C Power supply: Lithium battery 3.6 V Battery life: approx. 1 year at 5-second intervals EMC System / Cabin & Operation EMC system: Electronic control with 7" touch screen Driver's seat: BeGe 9100 Cabin: OPTIMA – ergonomic safety comfort cabin High noise and vibration damping Hydraulically tiltable to the side ADDITIONAL EQUIPMENT Front mud flaps Rear mud flaps Exterior mirrors on fender (high) Turbo II heavy-duty air filter Additional hydraulic functions Quick couplings on the fork carriage Accumulator/vibration damper 60 bar / 2 L in the lifting function Hydraulic oil tank pre-heating Additional LED headlights, 2 × on the mast Reversing alarm LED beacon Electrical cables over the mast Power connection 400 V, 3-phase Blue Spot front and rear EMC 107 electronic weight display (0.1 t) EMC 114 electronic joystick with RPM increase EMC 122 speed limiter 20 km/h, switchable to 15 km/h Electric seat heating DAB/analog radio incl. Bluetooth, MP3, AUX, USB, 2 speakers Intermittent wiper Crjdpfx Aey T Edhjfhjc ACC air conditioning SMV universal mounting rail Movable A4 writing pad LED reading lamp Diesel parking heater + engine water heater Sun visor (roof/front) Panorama rearview mirror Preparation for attachments from other manufacturers Central lubrication base, 14 points

Condition: used, Technical documentation Description of the unit Micronisation unit - Bepex Pulvocron PCS 10 mill and classification The Pulvocron air classifying mill utilizes high-speed impact and internal particle size classification to produce fine powders with a narrow size distribution. Adjustable operating conditions, including tip speed, air flow, and classifier speed provides control over resultant particle size, material temperature, and capacity. Thermally conditioning the inlet air stream provides optional heating to simultaneously dry and mill wet solids, or cooling to reduce resulting material temperatures. Air and powder filtration / recycling system. – Product filtration and collection cyclone – Explosion proof valve – Rotary air / product sealing valve – Product recovery hopper Additional information Regular maintenance and servicing. Cjdpfjzbynvsx Afhorc Full Documentation available. Electrical and safety control cabinet not available. These elements can be quoted separately.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Crodpfxozbxkce Afhoc

Condition: new, functionality: fully functional, Year of construction: 2026, container length: 19 ft, color: grey, overall weight: 15,000 kg, maximum load weight: 13,150 kg, empty load weight: 1,850 kg, loading space volume: 8.6 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 600 mm, Price upon request. The price is valid ex warehouse 33106 Paderborn! Quantity discounts are possible for the purchase of multiple containers. Europe-wide delivery possible upon agreement. *Leasing/hire purchase possible!* 2 units available in the short term; other RAL colors available upon request. Other designs and sizes are available ex warehouse Paderborn. You can view our stock on our website. Roll-off container according to DIN standard. Technical description: * Internal dimensions: 6000 x 2400 x 600 mm * Usable volume: 8.6 cbm * Tare weight: 1850 kg * Base 5 mm S235 * Side walls 1.5 mm S235, foldable, spring-assisted * All sheets and profiles are continuously welded * Combination flap (pendulum and folding wall, loadable up to 7 t, spring-assisted) * 8 tie-down eyes in the base, loadable up to 2.5 t * Container tested and approved according to DGUV Rule 114-010 * Base-side wall connection 90° * Stringers made of U 90x55x4 mm * Stringer spacing 750 mm * Hook diameter 50 mm, S355 * Hook height 1570 mm * Upper frame round tube Ø89×6.3 mm * Net hooks * All moving parts are greaseable * Steel drain rollers 159×6.3, length 300 mm * Zinc phosphate primer inside and outside, painted on the outside with synthetic resin paint (80-100 μ) * Permissible total weight 15,000 kg Errors and prior sale excepted. Photos are for illustrative purposes only! Crsdpfx Afjzbtlzohec The price applies per unit plus 19% VAT. If you have any questions, please send us a message or call us.

Condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: Mill is unused -Manufacturer: WIPA, Hammer mill -Type: WPZ 750-45 Cjdpfx Aozbk Tijfhjrc -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Inlet: Ø 400 mm -Ejection: Height adjustable -Rotor width: mm -Rotor diameter: mm -Number: 3 hammer mills available -Price: per piece -Dimensions: 1160/2335/H1550 mm -Weight: 2100 kg

Year of construction: 2020, condition: excellent (used), Fine impact mill, hammer mill, pin mill, pulverizer, side mill, granulator, shredder, powder mill, granulate mill, granulator, rotor mill, recycling technology -Condition: The mill was a demonstration unit equipped without a control system. -Manufacturer: WIPA, Hammer mill Credpfszbk Iyox Afhec -Type: WPZ 750-45 -Drive motor: 45 kW -Number of mallets: 4 pieces -Number of counter blades: 6 pieces -Ejection: Height adjustable -Inlet cross-section: mm -Rotor width: mm -Rotor diameter: mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1730/220/H3200 mm -Transport dimensions: 1370/220/H1730, 1400/800/H1470 mm -Weight: 1900 kg

Condition: used, Year of construction: 2018, machine/vehicle number: SCIAC44, Used Rinsing Machine Aesse Service LINE6 year 2018 This machine therefore provides a reliable and robust option for industrial bottling plants. A Esse Service manufactured this model in 2018 to ensure high performance with optimal energy efficiency while maintaining the quality of rinsing processes. Although previously used, the machine has seen very limited operation, which has preserved it in excellent condition. Now in storage, the LINE6 model is designed to handle glass containers with a standard 0.75 L format and operates at a speed of 900 bottles per hour (BPH). Technical Specifications of the Rinsing Machine Aesse Service The Used Rinsing Machine Aesse Service LINE6 year 2018 delivers stable production with a power consumption of 2 kW. In addition, a high voltage (A.T.) of 400 V alternating current ±10% with neutral and ground powers the machine, while a low voltage (B.T.) of 24 V direct current ±10% supplies control circuits. Therefore, the machine supports an operating frequency from 50 to 60 Hz, which adapts well to different industrial standards. Pneumatic System The Machine requires a pneumatic supply of 6 bar and consumes 500 liters per minute to operate effectively. Moreover, this stable airflow supports precise rinsing cycles, which is crucial in bottling lines where flow regularity directly impacts product quality. Furthermore, the airflow consistency ensures reliable performance over time. Dimensions and Weight Codpfxjvhcplj Afhjrc The compact design of the Used Rinsing Machine Aesse Service LINE6 year 2018 enables easy integration into work environments with limited space. For this reason, the machine measures 1300 x 1300 x 1600 mm (L x W x H), with a dry weight—meaning without liquids or filled conduits—between 300 and 500 kg. Consequently, the moderate weight allows for easy transport and installation, making the LINE6 model practical and versatile for various industrial applications. Container Capacity The Used Rinsing Machine Aesse Service LINE6 year 2018 handles bottles with capacities ranging from a minimum of 0.5 liters to a maximum of 1.5 liters, thereby providing versatile production capabilities. This range, in particular, accommodates rinsing needs for various standard formats used in the beverage industry. Bottle Diameter and Height Additionally, the machine accepts bottles with diameters from 55 mm to 115 mm. Consequently, this flexibility enables it to handle different types of glass containers securely during the rinsing cycle. Also, the machine supports bottle heights between 160 mm and 345 mm, which benefits companies by allowing them to use different formats without frequently changing equipment. Performance and Reliability The rinser provides long-lasting performance thanks to its robust construction and advanced engineering. Moreover, its design reduces routine maintenance, thus ensuring operational continuity essential for industrial bottling lines. Given that this machine has seen minimal prior usage, it adds to its reliability. With a speed of 900 BPH, the LINE6 model certainly meets the needs of high-production plants. Conclusion of the Rinsing Machine Aesse Service In conclusion, the Used Rinsing Machine Aesse Service LINE6 year 2018 offers an efficient and versatile solution for handling glass bottles of various sizes and capacities. Its compact design and high-quality construction, for in...

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,500 mm, loading space width: 1,358 mm, loading space height: 1,918 mm, total width: 1,920 mm, total height: 2,475 mm, A20 GW26P0201504 Codpfsyn Ug Tjx Afhjrc Refrigerated box trailer by Unsinn, type UKT6C 251319-13-14 Gross weight: 1,300 kg, low-loader, 4x heavy-duty support legs, overrun brake, equipped with GOVI air conditioning unit, model Arktik 1600N. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics Axles (braked version): AL-KO braking system Body: Thermo-sandwich construction * Inner and outer skins made of galvanized and powder-coated steel sheet for robust durability * PU-core insulation * Double-wing rear doors with aluminum hinges * Lever-lock and stainless-steel door retainer for the cooling compartment * Rear frame and edging profiles made of anodised special aluminum profiles for attractive aesthetics * All-around 3-sided impact protection Vehicle not refurbished Subject to errors and prior sale

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 08/2022, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,515 mm, A18 GW26M0151130 Refrigerated box trailer, manufacturer: Unsinn, UKT 6°C 2513-13-14, 2500x1350x1900mm, cooling unit: CIBIN, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg... and much more. Chassis: Unique, torsion-resistant aluminum frame for safe driving characteristics. Axles (for braked version): AL-KO brake system. Codpfeyn Uc Iex Afherc Body: Thermo-sandwich construction * Inner and outer panels made of galvanized and powder-coated steel sheet for heavy-duty use * Insulation: PU core * Rear door: double-leaf, with aluminum hinges * Refrigeration compartment lever lock and stainless steel door retainer * Rear frame and edging profiles made of special anodized aluminium profiles for an attractive appearance * 3-sided all-round impact protection Subject to errors and prior sale.

Condition: used, maximum load weight: 675 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,500 mm, loading space width: 1,350 mm, loading space height: 1,900 mm, total width: 1,920 mm, total height: 2,475 mm, A19 GW26P0201501 Refrigerated box trailer, manufacturer: Unsinn, model UKT 6°C 2513-13-14, dimensions: 2500x1350x1900 mm Refrigeration unit manufacturer: GOVI, model Arctik 1600N, serial no. 230317666A, single axle, overrun braked, 100 km/h approval, gross vehicle weight: 1,300 kg Csdpeyn Udrefx Afherc Chassis: Unique, torsion-resistant aluminium frame for safe driving characteristics Axles, with braked version: AL-KO brake system Body: Thermo-sandwich construction * Inner and outer panel made of hot-dip galvanized and powder-coated steel sheet for robust use * Insulation: PU core * Rear double-wing door with aluminium hinges * Refrigerated compartment pressure lever lock and stainless steel door retainer * Rear frame and edging profiles made of special aluminium profiles, anodized for an attractive appearance * All-round three-sided impact protection Subject to errors and prior sale

Condition: used, mileage: 134,092 km, power: 130 kW (176.75 HP), first registration: 06/2017, fuel type: diesel, overall weight: 3,500 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 3, total width: 2,080 mm, total height: 2,300 mm, loading space length: 3,630 mm, loading space width: 2,030 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 1233. 2B76729 ---- EQUIPMENT - Tipper conversion by Henschel - Radio: Audio system with CD, MP3-capable Bluetooth hands-free system - Touchscreen - Roof storage above the windscreen - Automatic air conditioning - Cooled glove compartment - Outside temperature display - Paintwork: Special metallic paintwork - Fog lights - Reinforced rear springs - 6-speed gearbox - ABS - Driver's side airbag - Outside mirrors, manually adjustable (2) - Reinforced battery - On-board computer - Tachometer - ESP with hill start assist and ASR - Electric front windows - Height-adjustable headrests (3) - Ladder frame and impact protection behind driver - Emergency brake assistant - Particle filter: Soot particle filter for Di - Upholstery: Fabric - Power steering - Seat: Passenger double seat bench - Seat: Driver's seat, height-adjustable Codpfx Afeyf Sqkjherc - Socket (12 Volt) in the cargo area - Lashing eyes (8 pieces) - Immobilizer - Central locking with remote control ... and much more ---- The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Crsdpfx Asyq Sztofhjc Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: like new (used), Year of construction: 2023, SCM Accord 40 fx CNC machining center with the following equipment: Working area X-Y = 6360 x 1905 mm, Z = 350 mm OF0158 Usable Z clearance height = 350 mm with H50 suction cups OF0165 Axis travel speed of Accord 40 fx Version PRO-SPEED OF0168 Pendulum (dual-zone) operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via Internet 450328 eye-M PRO control console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 carrier rails MATIC – L1825 230429 MAXI working unit – Prisma KT 1 870046 Prepared for angle gearbox "Prisma KT-KS" 470014 Air nozzle for tool 870119 Device for tool length measurement 870120 Device for panel thickness measurement 870009 Drilling unit F16 OF0176 Front stop row H50 for worktable with 10 carrier rails 510205 Preparation for clamps for worktable with 10 carrier rails 480178 Front stop row H110 for worktable with 10 carrier rails 480105 Rear stop row H110 for worktable with 10 carrier rails 480137 First lateral stop row H110 for worktable with 10 carrier rails 480005 Suction cups H110, 145x145 mm, 36 pcs 480006 Suction cups H110, 145x55 mm, rotatable, 10 pcs 480007 Suction cups H110, 180x65 mm, rotatable, 10 pcs 480018 Suction cups H110, 145x30 mm, rotatable, 5 pcs 480410 Lifting devices H110, 8 pcs 350016 Vacuum pump 250 (300) m³/h 560538 Additional automatically adjustable base for MATIC 10 carrier rail 190046 PRO-SPEED safety system 524800 "SAV€NERGY" 2.0 energy saving system 210837 TR12 – lateral tool magazine 210056 Rapid 24 – rear tool magazine OF0182 Air conditioning for control cabinet OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware dongle for Maestro cnc Cjdpfx Aoyfgzdofhsrc 524309 Maestro 3D-Advanced module 109993 MACHINE LANGUAGE: German SPECIAL FEATURES INCLUDED IN MACHINE CONFIGURATION: - Extension of maximum panel width to 2,120 mm for full processing; traverse length remains unchanged at 1900 mm. - 10 support suction cups for remnants MACHINE ALREADY DISMANTLED AND STORED. LIST PRICE 2023 EUR 399,890.--

Condition: used, Year of construction: 2011, AXES Working Range X-Y-Z Axes * mm 3050-1300-180 Workpiece length for pendulum operation mm 1390 Stroke X-Y-Z Axes mm 3460-1735-250 Max. traverse speed of X-Y axes m/min 60 WORK TABLE Number of workpiece supports and vacuum cups 6 / 2 standard type Standard end stops / position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles std/quantity/speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles std/quantity/speed 1/min 6 (4X-2Y) / 4000 Integrated grooving / saw unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power std./opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer traveling with unit carrier in X 4 places, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction connection diameter mm 150+150 (200) Machine weight Kg 3000 * X: distance between stops; Y: milling center as reference point; Z: workpiece passage GENERAL FEATURES CNC-controlled drilling and milling center, C-frame design, and worktable with adjustable workpiece supports and vacuum suction cups, for: - Vertical drilling on the panel surface - Horizontal drilling on all four workpiece sides - Groove milling with disc cutter in the “X” direction - General milling work Self-supporting structure and work table Structure made from welded steel construction with control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV carrier options. Box construction made from cold-rolled steel with internal stiffening ribs and protective devices comprising a drilling head with vertical spindles, horizontal spindles, an integrated grooving and saw unit, and an SCM electrospindle with HSK 63 F quick-change tool system. Movement paths of the portal and unit carrier Cjdpfxoyymz Us Afhorc Movement in the X, Y, and Z axes is via linear prismatic guideways with preloaded ball bearings. The X-axis movement (moving gantry) uses a preloaded, backlash-free rack-and-pinion drive with helical gearing. Movement of the unit carrier in Y and Z directions is also preloaded for precision. Positioning of the working units and machine function control is through "brushless" AC servo motors and digital drives. CNC CONTROL The control unit comprises a numerical control for the milling and drilling machines and a PC with a graphical user interface "XILOG PLUS". PC office operating system Windows XP - 17" LCD color screen - QWERTY keyboard - Swiveling control panel - Machine interface: Xilog Plus software Xilog Plus Features Programming - Parametric, graphical, and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation on three axes, spatially linear, spirally on selected plane - Supported programming with graphical and syntax assistance for drilling and milling operations - Automatic optimization of drilling operations and tool change cycles - Possibility to shift panel zero point for drilling on slanted or curved panel sides - Full compatibility with CAD/CAM Routocam (SCM) – AlphaCam Integrated additional functions - Calculator for direct transfer of computed data - S

Condition: new, Massive work table made of heavily ribbed cast iron Robust base frame constructed from welded steel Precision sliding table made of anodized aluminum Carbide guideways – for long-term precision and minimal maintenance of the sliding carriage Tilting cast iron saw unit with double segment guide Heavy-duty parallel fence with round bar guidance Integrated mitre cutting device on the sliding table Scoring unit with its own powerful drive motor (optional) Equipped with a high-quality panel frame & telescopic stop, integrated roller, inclined scale, and practical eccentric clamp Saw blade speed adjustable in two steps (from above, table insert removable) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR PARALLEL FENCE Max. cutting height at 90° (mm): 140 with 400 mm blade Max. cutting height at 45° (mm): 100 with 400 mm blade Saw blade tilting range (degrees): 90/46° Credeit I Sbjpfx Afhec Manual saw blade lifting and tilting Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scoring unit motor power (kW) 50 Hz: 1.3 Scoring unit speed (rpm): 9,200 Panel cutting capacity (mm): 3,200 x 3,200 Cutting width for parallel cuts (mm): 1,270 Extraction port diameter (mm): 120, 60

Condition: new, empty load weight: 2,950 kg, maximum load weight: 10,050 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,080 mm, loading space width: 2,420 mm, suspension: steel, tire size: 2, color: other, gearing type: other, front tire size: 2, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, central locking for side and rear drop sides, automatic rear panel opening when tipping backwards, side panels are pendulum-mounted and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grained steel, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, gearbox support winch with load and fast mode, at the front, contour marking according to ECE R 048 regulation. -- Subject to errors, changes and misprints, sample images -- For more data see: !, More details: ! Codpjza A Rwofx Afhorc

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 850 mm, travel distance Z-axis: 650 mm, spindle speed (max.): 24,000 rpm, spindle motor power: 11,000 W, number of axes: 4, This 4-axis Elumatec SBZ-140 was manufactured in 2010. It features a maximum profile length of 7600 mm and a Y-axis travel of 850 mm, making it suitable for machining aluminum and thin-walled steel profiles. The machine includes an air-cooled spindle with a maximum speed of 24,000 rpm and a tool magazine capacity of 8 positions for efficient operation. If you are looking to get high-quality machining capabilities, consider the Elumatec SBZ-140 vertical machining centre we have for sale. Contact us for further details. Crjdpfx Aezaq Eiefhec • Application: Machining of aluminum and thin-walled steel profiles • Operating system: Windows • Machining capabilities: Milling, drilling, tapping, end machining • Continuous machining range: 0°–180° • Working area: • Max. profile length with end machining: 7480 mm • Max. profile length without end machining: 7600 mm • Axis travels: • A-axis rotation: 0°–180° • A-axis programming increment: 0.1° • Axis speeds: • Y-axis: up to 60 m/min • Z-axis: up to 60 m/min • Spindle: Air-cooled • Tool magazine: 8 positions, co-moving for fast tool changes, expandable system • Machine features: Stationary profile machining, fast automatic tool changes, suitable for aluminum and thin-walled steel profiles, two machining zones (optional) • Pneumatic system: 7 bar required, approx. 180 l/min air consumption (with spray system) • Electrical data: 400 V / 3-phase / 50 Hz, main connection 63 A • Control panel: 15” color display, USB interface, LAN connection Additional equipment • Angle head set (0°, 90°, 180°, 270°) for end machining and double profiles • Pendulum mode / 2 working zones (optional configuration)

Year of construction: 2026, condition: new, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, machine/vehicle number: 2026, Lillnord fermentation breaker Maryline model FR 103-81 suitable for all dough pieces that are baked in sales! particularly good for dough pieces with long-term processing of up to 3-4 days 2 mm stainless steel pan with floor heating for 1 trolley with 600 x 800 mm or 2 trolleys with 600 x 400 mm TSC1902 computer/touch control Temperature range from max. -12°C to + 40°C Humidity up to 90% RH Cooling unit ready to plug in above Refrigerant R 449A PID regulation of humidity and temperature Water connection 3/4 inch stainless steel version Connection 230V, 4500 Watt, 10A, 16A-CEE plug Dimensions: 810 x 1030 x 2365 mm, WxDxH New device 12 months of warranty Option: - Door with thermal window - CO2 vaporizer - Impact protection in stainless steel or PVC - FlexBaker with ready-fermented products - Aggregate external Come and take a look at our large warehouse of bakery machines Codpfsin Eahjx Afhsrc

Condition: used, Year of construction: 2011, Base Machine M800 X5 TV 1 WORKING RANGE X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance Height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made from thick-walled steel. It is reinforced across the entire machine bed with welded components, providing exceptional stability. The table design, with its large base, is the key to ensuring lasting precision and stability. The machine’s layout enables the operator to achieve optimal workflow with minimal space requirements. The mobile gantry is built as a solid monoblock. It is positioned in the X direction on prismatic, ground guides with recirculating ball carriages. The machining unit is mounted on this mobile support carriage, also on prismatic, ground guides and recirculating ball carriages. AXIS MOVEMENT All axes travel on prismatic linear guides with large cross-section and recirculating ball shoes with a wide contact surface, which ensures optimal sliding, even at high speeds and accelerations. The precise and fast positioning of the movable gantry (X-axis) is achieved via helical rack and pinion. Large cross-section recirculating ball screws ensure accurate positioning of the machining unit along the movable gantry (Y and Z axes). The perfect mechanical dynamics and maximum positioning accuracy are controlled by high-quality drives and brushless motors. Max. axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are fitted to the movable upright, and a light barrier system is installed at the front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to a lower value of 25 m/min without stopping the machine. This system allows parts to be loaded during pendulum operation without the limitation of access areas, as seen with pressure mat systems. This prevents unwanted interruptions in the machining cycle and offers greater freedom of movement around the worktable. CE certification for the safety system 1 Safety protection fence 1 Side and rear protection fence Automatic central lubrication controlled via CNC 1 The lubrication of the X, Y, and Z axes is controlled by the CNC; intervals are regulated automatically, without manual intervention. Central extraction connector 1 All individual extraction connections of the machining units are collected into a central extraction port. Inside the port, there are various slider valves controlled by the NC. This reduces the required extraction air volume. Chip conveyor 1 Maxi – 5-axis electrospindle 11 kW HSK-63 “Prisma K 1 5-axis electrospindle, 11 kW at 20,000 rpm S1 (100% duty cycle) Speed: max. 20,000 rpm Rotation direction: left/right Liquid cooling Tool interface HSK 63F Inverter 18 kW, stepless, smooth power delivery Max. rotation B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, it is possible to perform complex horizontal positioning in a small workspace. This enables the machining of complex geometries without the risk of collision. Codpfjxy Tmnjx Afhsrc

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, rotational speed (max.): 18,000 rpm, Emmegi Phantomatic T5 – CNC Profile Machining Centre (2007) For sale: a well-maintained and fully operational Emmegi Phantomatic T5 CNC profile machining centre. This machine is ideal for the efficient and precise processing of aluminium, PVC, and light-alloy profiles. The long X-axis travel allows machining of profiles up to 7 meters in a single setup, while the pendulum mode delivers outstanding productivity for series production. Technical Specifications Manufacturer: Emmegi Model: Phantomatic T5 Year of Manufacture: 2007 Control System: CNC – 3 axes (X/Y/Z) Ncjbjxz R H Uomt Dty Aen Axis Travels: X-axis: 7000 mm Y-axis: 300 mm Z-axis: 350 mm Spindle Power: 5.5 kW electrospindle Spindle Speed: up to 18,000 rpm Tool Holder: ISO 30 Tool Magazines: 2 × (5 + 1) tool positions Machining Capability: Five-sided machining with angle heads Clamps: 8 pcs, automatic positioning Operating Modes: Single-zone machining Double-zone / pendulum machining Maximum Profile Length: 7000 mm Codpfxsxz R H Ue Afhsrc Machine Weight: approx. 3200 kg Air Pressure: 6–8 bar Equipment & Features - Automatic clamp positioning - Sawing, drilling, and milling in a single setup - Pendulum mode for continuous production - Dual tool magazines for both working zones - Suitable for long aluminium and PVC profiles - Optional Camplus software (depending on machine) Condition - Fully functional and ready for operation - All axes run smoothly - Tool magazines fully operational - Mainly used for aluminium profiles (light-duty work) - Machine is clean and in straight condition Ideal Applications - Aluminium window & door fabrication - Light-alloy profile machining - PVC profile processing - Batch and serial production - Industrial manufacturing of long profiles Please verify the accuracy of the machine specifications with the seller

Condition: used, machine/vehicle number: WFDFLT33902026418, empty load weight: 7,156 kg, maximum load weight: 27,844 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2019, next inspection (TÜV): 02/2026, loading space length: 14,980 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 15,100 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", color: grey, The images are archive pictures! Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin, X-tra Long, with an internal length of 14,980 mm, outer frame slightly slanted with "Load-Lock profile" for securing lashing straps. 24 t, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with shim compensation. One wheel chock with holder, aluminum side underrun protection, galvanized steel rear underrun protection, quarter-shell mudguards in front of the 1st axle and behind each axle, "Heavy Blocker" rear cross ramming protection + "roller buffer side impact protection." Pair of ferry lashing rings, yellow marked, heavy-duty pallet stops on both sides, approx. 15-20 mm high, with lashing option every 200 mm, loading height reduced by approx. 15-20 mm, spare wheel holder for 1 spare wheel, with wheel mounting kit, spare wheel of same brand and specification as main tires, steel rim, plastic toolbox, with drawer and intermediate shelf, width=650 / height=520 / depth=670 mm, lockable with padlock. Axles & Suspension: BPW disc brake axles, "axles/chassis laser measured" to reduce tire wear and fuel consumption, hubodometer/kilometer counter, air suspension, air spring diameter 360 mm, total lift approx. 260 mm. Brake System: 2-line compressed air brake system, spring-loaded parking brake, 2 non-swappable coupling heads at the front without connection line, EBS by Knorr, electronic braking system with EBS socket at front, no connection cable. Wheels & Tires: 435/50 R19.5" steel rims, factory silver, ET 120. Electrics: Credpfx Aoy Efzksfhec 24 volt, 4 x 3-chamber LED taillights with resistors, + 2 round combination reverse/fog lights in LED, yellow LED side lighting. License plate lighting in LED. 1 x 15-pin socket at the front, without interconnection cable. Floor: Approx. 30 mm thick phenolic coated plywood, cross joints with omega inserts, on longitudinal subframe for high point load capacity for forklift axle loads up to max. 7,100 kg. Superstructure: Mounted superstructure. Front bulkhead / corner posts at the front have signs of use. 2,580 mm high, volume version steel corner posts, side curtain release device at bulkhead, "Crash Blocker"—internal steel ramming guard approx. 140 mm high at the bottom. Center posts: Pair of sliding posts adjustable over the entire length, with 7 multiple stake pockets. Insert slats: Rows of aluminum V-insert slats incomplete. Fliegl "I-Lock" integrated door locking mechanism. Tarpaulin shows signs of use, with welded horizontal and vertical straps. Roof: Sliding roof, rear end liftable, with roof sliding from rear to front, L- type, tarpaulin color: white. Hydraulic lift roof on both sides, one cylinder with hand pump per post, can be lifted by 400 mm, front with 3 driving positions: inside height approx. 2,900 mm / 2,950 mm / 3,000 mm, set to approx. 2,950 mm. Anti-ice system with 1 hose in the middle, automatic forced venting via brake light (not available in combination with sliding roof openable from the front). Optimum rain gutter at the rear, top of the end hoop, above the doors. Operating instructions: Special permit required if total towing length exceeds 16,500 mm. Approvals / Certificates: Load securing certificate according to EN 12642 XL (valid only with 4 rows of aluminum slats), additional DC 9.5 certificate, heavy-duty pallet stops on both sides, approx. 25 mm high, loading height reduced by approx. 25 mm. The images are ar

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024288, empty load weight: 6,075 kg, maximum load weight: 32,925 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2019, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: blue, The images are archive photos! The vehicle may still be in use! Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly sloped with "Load-Lock profile" for lashing strap attachment. Crodpfoy Dfprox Afhsc Note! To attach the straps in combination with sideboards, the sideboards must be opened! 24t, 2-speed landing gear, single-sided operation, with straight base, without compensating slide Pull-out ladder at the rear Side door retainers 2x wheel chocks with holder Attention! Only Chassis No. 2024286 - 89: Pallet box for 30 Euro pallets (ground clearance approx. 220 mm) Underrun protection, galvanized steel Quarter-mudguards in front of and behind axle assembly With EC-compliant anti-spray flaps Rear impact protection Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm, can be locked with a padlock (padlock not included) Axles + Suspension SAF axles "Axle/chassis laser aligned" reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, activated by "brake 3x" (starting aid functions up to a 30% axle overload and up to max. 25 km/h) Brake system 2-line compressed air brake system, color-coded lines for easy servicing. Spring-type parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and Tyres 385/65 R22.5, manufacturer at the manufacturer's discretion Steel rims, factory silver Electrics 24 Volt, multi-chamber lights, yellow LED side marker lights 2 white position lights at the front 2 white/red lane control lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Front bulkhead / corner stanchions 2, 580mm high, steel corner stanchions in volume design, release mechanism for side curtain at the front bulkhead "Crash-blocker", internal steel impact protection at about 140mm height Center stanchions 3 pairs of sliding stanchions movable along the full length, with 4 insert pockets and a long pocket at bottom 3 pairs of stanchion positions Rear wall / rear corner stanchions Rear corner stanchions up to the lower edge of the roof, curtain attachment with round tube and ratchet tensioner Rear portal doors, two-leaf, each with two internal rotary bolt locks Tarpaulin Tarpaulin with integrated horizontal and vertical belts Tension latches made of stainless steel Roof Sliding roof, rear liftable end, can be slid from rear to front, tarpaulin color: white Optimized rain gutter at rear, on top of the rear bow, above the doors Operating instructions When assembling combinations, ensure compliance with the legally permitted overall vehicle height! If the total height exceeds 4,000 mm, please observe the following: The transport contractor is responsible for any resulting damages. The transfer agent must obtain permission according to § 29 StVO We assume no liability for the transfer of the vehicles. The images are archive photos! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024358, empty load weight: 6,149 kg, maximum load weight: 28,851 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, suspension: air, tire size: 385/65 R22.5", color: blue, The images are archive photos; the vehicle may still be in use! Chassis Platform Semi-Trailer for Freight Forwarders Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock" profile for lashing strap attachment Note: In order to attach the straps in combination with side walls, the side walls must be opened! Pair of additional lashing rings integrated into the outer frame, each rated at 2.5 t 24 t, two-speed landing leg, single-sided operation, with straight base, without compensation mechanism Pull-out ladder at the rear Side-mounted door retainers Wheel chocks with holders Pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or rear swing clearance approx. 1,930 mm Cedpfx Afowyiw Eohorc Underrun protection, galvanized steel Full-width rear spray flaps Half-shell mudguards With anti-spray mud flaps only on the last axle Rear impact guard "Blocker" – galvanized crosswise steel angle as forklift and hinge protection Pair of ferry lashing eyes, marked yellow Pallet stop on both sides, approx. 15-20 mm high, bolted design; loading height is reduced by approx. 15-20 mm Spare wheel holder for one electronic wheel, including wheel mounting kit, basket type, brand Schoch! Spare wheel, same brand/type as main tires, steel rim Stainless steel toolbox, width=600/height=400/depth=500 mm, with polished, lockable door Stake pockets Front right: 5 rows of aluminum V-stake inserts Front left: without stake inserts Rear wall / rear corner posts Rear corner posts made of steel up to the lower edge of the roof, curtain pole mount with round tube and curtain tension ratchet Rear portal doors, 2-leaf design, each with 2 internal rotary bolt locks Curtain Curtain with welded horizontal and vertical straps Quick Lock system for side curtain with central locking, on left side only Stainless steel tension locks on right side Customs rope all around with holder at front wall (no customs seal, not in combination with Quick Lock) Customer labeling on side curtains and rear portal Curtain with high-strength embedded spring steel strips, left side (Attention! When fitted, no stake inserts front left) Roof Sliding roof, rear end-lift foldable upwards, sliding tarpaulin from rear to front, tarpaulin color: white EcoLift – roof can be raised by approx. 380 mm, both sides, gas strut assisted Optimal rain gutter at rear, upper end rail, above the doors Paintwork Frame: Hot-dip galvanized incl. passivation Landing legs: black coated Front corner posts: galvanized and painted to match front wall color Front wall: MB 5328 blue Rear corner posts: galvanized and painted to match rear wall Rear wall: MB 5328 blue Curtain: RAL 5010 gentian blue Pallet box lid: RAL 2011 deep orange The images are archive photos; the vehicle may still be in use!

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Working Roll Material Crodpfey Ugtaex Afhjc The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: used, empty load weight: 5,175 kg, maximum load weight: 30,825 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2019, next inspection (TÜV): 12/2026, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, total length: 25,500 mm, total width: 30,500 mm, total height: 88,100 mm, suspension: other, tire size: 385/65 R 22.5, wheelbase: 4,800 mm, Year of construction: 2019, front tire size: 385/65 R 22.5, rear tire size: 385/65 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer Schmitz SCB, aluminum superstructure, SCB air suspension type MRH-KU 35, lifting and lowering function, tipper body (muldenkipper), lift axle – 1st axle, pendulum tailgate, wheelbase 4800 mm, rolling tarpaulin, disc brakes, chute, standard color grey, load pressure gauge, Alcoa aluminum rims, 4 x LED reversing floodlights, 2 x 3-chamber LED rear lights, chute, work platform, foldable underrun protection Crjdpfjy D Uhwox Afhjc