Used Pattern Makers Lathe for sale (5,752)

Condition: good (used), Year of construction: 1990, Control system: Siemens 840-C Dcsdpszadagjfx Agvoh Faceplate diameter: 1800 mm Swinging diameter: 2000 mm Maximum turning height: 1100 mm (below tool) Table speed: 130 RPM Workpiece weight: 8000 kg Tool changer: 12 positions

Condition: used, CNC turning machine TRAUB, Type TND 400 Serial No. 708, Year of manufacture 1996 CNC control TRAUB TX 8 F Nominal turning diameter: 400 mm Swinging diameter over bed: max. 470 mm Spindle bore in draw tube: 65 mm Motor power, spindle drive: 22 kW Total power consumption: 35 kW Mains connection: 380 volts, 50 Hz - Electronic handwheel - RS 232 data interface - Turret with 12 tool positions, VDI 40 - Includes 8 tool holders, VDI 40 - 3-jaw chuck, Ø 225 mm, SMW Autoblok, Type KNCS-N-Ø 225-65 Includes a large quantity of chuck jaws Dedszacwdopfx Agvech - Hydraulic internal expanding cylinder, SMW, Type ZHDAS-130-67 - Chip conveyor, KNOLL, Type 200 S-1/600 - Coolant system - Hydraulic unit (L x W x H 650 x 500 x 1000 mm) Space requirement L x W x H: 4800 x 2000 x 2100 mm Space requirement, base machine L x W x H: 3500 x 2000 x 2100 mm Space requirement, chip conveyor L x W x H: 4500 x 700 x 1550 mm Weight: approx. 5 tons Good condition Machine is ready for demonstration. The internal expanding cylinder for workpiece clamping needs to be repaired.

Condition: good (used), Year of construction: 2001, Control: SIEMENS 840D Max. machining diameter: 2,800 mm Machining height: 1,000 mm Tool holder: CAPTO 6 Dcodpfjzacfnsx Agveh Including chip conveyor and 2 supports

Condition: good (used), Year of construction: 2001, Control: SIEMENS 840D Dedjzacfbspfx Agvsch Machining diameter: 4,000 mm Machining height: 1,400 mm Cross slide travel: 850 mm Including chip conveyor and 2 supports

Condition: good (used), Year of construction: 2007, functionality: fully functional, Control: SIEMENS 840D PL ManualTurn turning diameter: 1.140 mm Dcsdjzacdkjpfx Agvsh turning lenght: 4.200 mm turning diameter over slide: 800 mm faceplate diameter max.: 1.000 mm Support Length of the bed slide: 1.000 mm Travel of the cross slide: 650 mm Width of the cross slide: 425 mm bed width: 710 mm Main Spindle spindle bore: 120 mm spindle diameter in front bearing: 190 mm Accessories 1 piece fix steady rest 10 pieces Multifix quick-change steel holder Typ D The machine has been general overhauled in 2007.

Condition: refurbished (used), Year of construction: 2022, functionality: fully functional, turning diameter over bed: 540 mm turning length: 1.500 mm Dcedpfx Agjzacctsveh turning diameter in the recess: 580 Working travel of the lower slide max. approx.: 415 mm adjustment of upper support, max. approx.: 140 mm turning speed range: 0 - 1.800 U/min diam. of main spinde: 135 mm spindle bore: 68 mm internal taper diameter: 73 mm bed width: 403 mm Equipped with: Three jaw chucks FORKARDT 250 Digital read out 3 axis fixed steady rest feed safety chip tray tool holders, 6 chisel holders, 1 holder for clamping sleeve

Condition: used, Year of construction: 2006, Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 Turning diameter: 650 mm Turning length: 1,500 mm Total power requirement: 33 kW Center distance: 1,500 mm Swing diameter over bed: 650 mm Swing diameter in recess: 670 mm Swing diameter over face slide: 260 mm Face slide travel: 380 mm Main drive Drive power AC motor - 40/60/100% duty cycle: 33/27/22 kW Spindle box Spindle bore diameter: 106 mm Spindle diameter in front bearing: 140 mm Speed range (V constant): 1 - 2,000 rpm Cross slide Feed range, face: 0.001 - 1,000 mm/rev Feed range, face, optional up to: 5,000 mm/rev Feed range, longitudinal and thread pitch: 0.001 - 2,000 mm/rev Feed range longitudinal and thread pitch, optional up to: 13,000 mm/rev Feed force flat: 9,000 N Feed force longitudinal: 12,000 N Automatic tool turret Number of tool stations: 12 With tool drive for 6 stations Tool holder system (DIN69880) VDI40 Dodpfx Ajzacb Asgvjch Equipment SIMENS SINUMERIK 840D sl (Shop Turn with manual functions) COMBI control station C-axis with drilling, milling, and engraving cycles Residual material detection and machining – during roughing and contour pockets MULTIFIX C forne setup Three-jaw chuck SMW AUTOBLOK: HI-GRIP HGF260-81-3 Oil emulsion mist filter for work area extraction: MAHLE LTA600

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW Dodpfx Ajzaa T Nogvech turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. The machine was meticulously maintained by the previous owner. It was sold due to a factory closure Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: good (used), Year of construction: 2003, functionality: fully functional, Technical details turning diameter 815 mm turning length 3000 mm control ECS 2402 swing over bed 815 mm centre distance 3000 mm swing diameter over slide rest 485 mm spindle bore 137 mm spindle turning speed range 1200 U/min rapid traverse 5 m/min spindle motor 28 kW tailstock quill diameter 115 mm tailstock quill stroke 250 mm total power requirement 30 kW weight of the machine ca. 7,0 t dimensions of the machine ca. 5,87 x 2,10 x 2,10 m Additional information Dcodpfx Agszaa Nqsvjh Equipment: * CNC-control E.C.S. 2402 * 3-jaw chuck * 4-jaw faceplate, diameter 700 mm * 4-jaw faceplate, diameter 400 mm * 3 Steady rests * Chip Conveyor Without boring bar holder and boring bar.

Condition: good (used), Code: 0396 Brand: EINHELL Model: TC - WW 1000 Wood lathe Technical specifications: Power supply 220 Volt Centre distance 1000 mm Turning diameter 280 mm Motor power 350 W Dsdpozaa Adjfx Agvech N° 4 speeds (890/1260/1760/2600 rpm) Backing pad Tailstock Overall dimensions mm 1500 x 200 x 350 h Weight kg 23

Condition: excellent (used), For sale: Genini brand lathe in very good condition Dcedpfsxf Nyujx Agvsh

Condition: used, Year of construction: 2000, Technical details: turning diameter: 800 mm turning length: 2965 mm max. turning dia. over saddle: 520 mm spindle bore: 92 mm turning speed range: 3 - 1800 U/min spindle head: Größe 11 total power requirement: 37 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 5,2 x 2,2 x 1,9 m Teach In Control MTC-K 3-jaw chuck ROTAS Dia. 400 mm face plate RÖHM Dia. 630 mm 4-station toolholder system PARAT 1 fixed steady coolant attachment and chip conveyor Dcsdpfx Agsxxig Ueveh *

Condition: used, Year of construction: 1996, Technical details: turning diameter: 500 mm Dcsdpfxjwwlvle Agveh turning length: 1500 mm turning diameter over bed slide: 290 spindle bore: 71 mm turning speed range: 3 - 2800 U/min rapid speed: 10 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 22 kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 3,0 x 1,6 x 2 m with Teach In controll R&D MTC-K PARAT toolpost 1 fixed steday dia. 100 mm 4 jaw face plate dia. 500 mm coolant attachment *

Condition: used, Year of construction: 1998, Technical details: turning diameter: 830 mm turning length: 4000 mm turning diameter over bed slide: 540 mm spindle bore: 130 mm turning speed range: 2 - 1600 U/min rapid speed: 4 / 5 m/min feed speeds: 1 - 2000 mm/min total power requirement: 55 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 7 x 2,2 x 2 m with Teach In controll R&D MTC-K MULTIFIX toolpost size D coolant attachment Dcjdpfx Agjwwlt Rsveh *

Condition: used, Year of construction: 1991, Technical details: turning diameter over bed: 570 mm turning diameter over slide rest: 365 mm turning length: 2000 mm feed per revolution: 0,06 - / 0,03 - 28 mm spindle turning speed range: 11,2 - 2240 U/min spindle bore: 62 mm spindle head: 8 nach DIN 55022 total power requirement: 15 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: 4,5 x 1,5 x 1,4 m with digital readout HEIDENHAIN rapid feed, MULTIFIX toolholder system fixed steady dia. 160 mm 3 jaw chuck RÖHM TR 250 Dodpfjx D Ufmjx Agvsch coolant attachment diverse toolholders, diverse jaws *

Condition: used, Year of construction: 1986, Technical details: turning diameter over bed: 1000 mm turning diameter over slide rest: 745 mm turning length: 3000 mm turning speed range: 4,5 - 900 U/min spindle bore: 110 mm Djdevgmlnjpfx Agvech max. workpiece weight between centres: 12500 kg total power requirement: 30 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 5,2 x 2,3 x 2 m 3-axes digital readout rapid feed, feed at upper support 350 mm 1 fixed steady face plate diameter 1000 mm coolant attachment *

Condition: used, Year of construction: 1993, Internal item no.: 26036 Lathe Weiler Praktikant 160B Dsdpfx Asy D N Dasgvjch Year of manufacture: 1993 Centre height: 160 mm Centre distance: 650 mm Spindle speeds: 48–2,500 rpm Spindle bore: 40 mm The machine is equipped as follows: - 3-axis digital readout (Z0 display not working, likely scale is defective) - Multifix "A" toolpost - Drill chuck MK3 - 160 mm 3-jaw chuck Garant (including reversible jaws) - Steady rest - Various change gears - Operating manual / repair documents, etc. Condition: All gear stages shift smoothly. The main spindle runs very quietly, even at high speeds. The bedways have slight scoring. Dimensions (LxWxH): 180 x 90 x 170 cm Weight: approx. The machine is fully functional and can be inspected under power by arrangement at our premises, with over 500 m² of heated storage space.

Condition: good (used), Year of construction: 1970, functionality: fully functional, Single Column Vertical Turning Lathe | Froriep DS 14 NC The machine was overhauled in 2009, recently cleaned, and is in good condition. Dcodpfx Ajyft S Asgveh - Table diameter: 1,400 mm - Swing diameter: 1,600 mm - Turning height: 1,500 mm - Siemens control type 840 D - Automatic tool changer - Workpiece weight: 6,500 kg - Vertical slide travel: 1,000 mm - Spindle speed: 10–315 rpm - Feed rate: 3,600 mm/min Inspection is possible at any time by prior arrangement. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: Froriep | DS14 | DS14NC

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 379082, Single-column vertical turning lathe | Schiess-Froriep 14 DKE 1250 The machine was overhauled in 2015 by Matschuk, recently cleaned and is in good condition. - Table diameter: 1,250 mm - Swing diameter: 1,500 mm - Turning height: 1,250 mm - Siemens control system type 840 Dsl Dcodpeyfurqofx Agvsh - Tool holder Inspection is possible at any time by prior appointment.

Condition: good (used), Year of construction: 1982, functionality: fully functional, Single-column vertical turning lathe | Dörries VCE 1400 The machine was overhauled in 2010 by Hering, has recently been cleaned, and is in good condition. Dcsdpfx Asyft Nnogvoh - Table diameter: 1,000 mm - Swing diameter: 1,400 mm - Turning height: 1,100 mm - Siemens CNC control type 840 D Shop Turn - Tool changer - X-axis travel: 2,000 mm - Z-axis travel: 700 mm - Slide adjustment: 1,000 mm - Rapid traverse: 6,000 mm/min - Spindle speed: 500 rpm - Handwheel - Total power requirement: 62 kW Inspection possible at any time by appointment. #Tags: Doerries | VCE1400 | Dörries VCE

Condition: good (used), Year of construction: 1963, functionality: fully functional, Single-Column Vertical Turret Lathe | Jungenthal DK 1400 The machine was overhauled in 1996, recently cleaned, and is in good condition. - Faceplate diameter: 1,200 mm - Swing diameter: 1,500 mm Dcedpfxsyft Ahj Agvsh - Turning height: 1,300 mm - Cross slide travel: 800 mm - Side slide horizontal traverse: 550 mm - Heidenhain Positip 855 digital readout - New operator panel - Various accessories Inspection is possible at any time by appointment.

Condition: used, Year of construction: 2007, machine/vehicle number: 8220TTC, FANUC Oi-TC control system, 12-position tool changer, maximum spindle speed of 5,000 rpm, power 25 kW, chip conveyor. Dcjdpfxsy U R R No Agvsh

Condition: excellent (used), Year of construction: 2006, CNC Teach-in Lathe COLCHESTER Alpha 1350 XT Travel X: 245 mm Numerical Command FANUC Between points: 650 mm Maxi turning diameter: Ø 350 mm Spindle diameter: Ø 41 mm Max Rotation: 3500 RPM Turret: 8 tools VDI 30 Year of construction: 2006 Spindle motor: 5,5 kW 3 speed ranges Centralized lubrication pump Dcodpfozblhnox Agvsh Delivered with 2 3-jaws chuck Ø 160 mm Delivered with some tool holders (see photos) Voltage: 380 V Dimensions (L x W x H): 2500 x 2000 x 1900 mm Weight: approx 2 T Machine in very good condition

Condition: good (used), Features: - Conventional lathe - Digital display (230 V single-phase power supply) - Longitudinal travel 850 mm, transverse travel 205 mm, vertical travel 95 mm - Programming of 200 auxiliary zero points - 200-tool magazine - Taper measurement - Reinforced prismatic bed, gray cast iron, induction hardened and ground - CAMLOCK D1-4'' spindle - Hardened and ground spindle, oil-bath lubricated, mounted on 2 high-precision tapered roller bearings - Turning accuracy < 0.015 mm on the chuck - Hardened and ground gearbox gears, oil-bath lubricated - Adjustable gib-free slides - Quick feed change via mechanical gearbox - Automatic longitudinal and transverse feeds - Simultaneous control of the spindle and leadscrew - Lateral movement of the tailstock +/- 10 mm - Maximum diameter above the carriage: 212 mm Dodpsy U Ruzefx Agvoch - Maximum diameter under the gap: 491 mm - Left/right rotation reversal via apron control - Pulse operation - Graduated verniers with zeroing on all axes

Condition: good (used), Year of construction: 2011, operating hours: 4,700 h, functionality: fully functional, machine/vehicle number: S6CZ1151, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 29,000 W, bar passage: 65 mm, Equipment: bar feeder, documentation/manual, Year: 2011 Dcjdpfoxwp I Aox Agveh Operating hours: 4,700 h (increasing) Turning diameter: 65 mm CNC type: Fanuc 18i-TB Number of turrets: 1 Axes: X, Y, Z, and C Number of turret stations: 12 Number of driven stations: 12 Main spindle and sub-spindle speed: 5,000 rpm Main and sub-spindle motor power: 29 kW Dimensions (L × W × H): 3,302.0 × 2,057.4 × 2,032.0 mm Weight: 5,700 kg Chip conveyor IEMCA MASTER 880r Verso bar feeder (3 m bar + loading magazine) Numerous fixed and driven tool holders included in the sale: _Axial driven tool holder: 3 _Radial driven tool holder: 4 _Swivel driven tool holder 0–90°: 2 _Fixed turning tool holder: 5 _Fixed drilling tool holder: 7 _Cut-off blade holder: 1 2 sets of chucks for jaw passage (main spindle and sub-spindle). The machine is currently in use but can be made available within 4 weeks. The machine is to be collected on site (Saint Pierre en Faucigny). Loading and transport costs are at the buyer’s expense.